How to make a hat out of paper. DIY paper hat: cap, pirate hat, painter’s cap, skullcap. Detailed photo instructions + video master class

Features of paper hats

How to make a cap from newspaper? In fact, everything is much simpler than it seems. Making crafts does not take much time. The technique allows you to make hats for a large number of people. Features of the craft:

ease of implementation;
covering your head from construction debris;
sun protection in hot weather;
cheap material for manufacturing;
one-time use.

Paper crafts are suitable for children's games. You can create several hats for your child and his favorite toys. This way, your little one can imagine going camping with his best friends.

Necessary materials

Hats using the origami technique are made from any available paper. They can be folded from newspaper or use unnecessary scraps of wallpaper - the origami hat is so unpretentious in its material. Take yesterday's Izvestia or simple office paper - it doesn't matter. Much more significant is the decor, thanks to which the paper hat will acquire a thematic affiliation (pirate, gentleman, cowboy). To decorate the headdress, use feathers, any appliqués, drawings and inscriptions, buttons and any other available details. So a simple paper cap can easily become a pioneer cap, an army cap, and even a navy cap.

What you need to make a paper hat

To make a paper hat, first of all, you need to prepare a place to work, materials and tools.

It will be most convenient to sit at a table with good lighting. There should be enough space so that you can lay out a sheet of paper and a little more.

For some models of hats, all you need to work with is the material itself - paper. For others, you will need to additionally prepare the following:

scissors;
glue;
paints and decorations;
ruler, pencil;
a compass or anything round that can be traced, the right size.

You should immediately clarify what you will need for the work so as not to interrupt the creative process.

Paper cap

A cap made from cardboard is much better than one made from newspaper. It is created on the basis of a sketch, which consists of 6-8 sections. First, they design the drawing in pencil on paper, then cut out the pattern along the marked lines, connect the parts in the center, aligning the holes made with a hole punch. The visor is glued to the main part. If the product is decorated with various decorative elements, you will get a bright and beautiful baseball cap.

Ideas for hats and materials from which they can be made

Making a hat is a fun creative process. Success largely depends on the chosen style and design

It is also important to choose high-quality material so that the product turns out the same

Stylish headdress

Important! The main decoration of the hat is an additional decorative element. It could be a feather, lace ribbon, bow

Particularly creative seamstresses decorate their products with figures of birds, animals or flowers.

creative hat

It is not at all necessary to use fabric for making. After all, hats are often an element of a carnival look, in which a non-standard approach to creation is valued. Such an element of women's clothing can be:

From paper. To make from this material you need to prepare paper of different densities, preferably large format. Most often, paper hats are not worn more than once. They are relevant during hiking, relaxing on the beach, when you need to protect your head, but there are no opportunities for sewing.
Another suitable material for creating a hat is cardboard. It is more practical to use than paper. A frame is often created from cardboard, which is then covered with fabric, mesh or decorated with fur.
A wide variety of hat models can be made from fabric. If a girl does not have sewing skills or time to create a pattern, then she can use knitwear. The simplest model is the beret; various types of fabrics are suitable for its manufacture.
In the cold season, you can crochet a fashionable hat. Or sew it from fur, for example, mink.

Note! Hats can be worn not only for holidays - they can become part of your everyday look. Designers offer various design options that will add a “zest” to the image.

Paper product

Hats are:

The Fedora hat is one of the most popular options. Features of its cut are wide fields. Felt is used to create it. Fedora goes well with coats and dresses. A girl with such a headdress looks elegant and stylish.
Separately, it is worth highlighting the dresses for carnivals or theme parties. You can be creative when making them. Hats are decorated with various decorative elements; several materials are used at once to make the hat look original.
Hats for special occasions. To make them, lace, beads, flowers, and satin ribbons are used. They are often complemented with a beautiful short crown. This hat looks elegant and elegant. As an example of stylish evening hats, you can look at famous women in Great Britain.
Panama hat is relevant in the summer. It is needed more for practical purposes than for beauty. Its main purpose is to protect the head from exposure to ultraviolet rays. Most often, straw is used to make a panama hat, or it is crocheted or knitted.
Girls and boys make hats for matinees from scrap materials.

Holiday hats

You need to choose a hat design in accordance with your image. But in order for the headdress to look beautiful, you need to choose not only high-quality materials, but also an accurate pattern.

Important! In an effort to demonstrate a creative approach to creating a hat, it is important not to overload the product. The image will not only look inharmonious, but the hat may not withstand a large number of decorative elements

The easiest option is to make a turban.

Autumn model

Therefore, before creating a headdress, you need to come up with a sketch. Then the design will look harmonious, and the hat will become the “highlight” of your image.

Original paper sombrero

To make an original long-brimmed hat you need to prepare:

Whatman.
Old plastic flower pot.
Glue.
Paints, brushes.

Using a compass and ruler, mark a circle for the hat on whatman paper.

In the center of the circle you need to prepare a small hole that corresponds to the diameter of the flower pot. Corresponding to the contours of the pot, an additional cone is cut out of paper.

Color the brim of the hat in any pattern (you can use photos of real Mexican hats as an example). Place the pot in a paper cone, attaching it with tape or strong glue. Attach the finished hat cone to the wide brim.

Hatter from a fairy tale

Many other headdresses for masquerades are also prepared based on the cylindrical shape. For the tall and expressive hat of the Hatter, line all the prepared cardboard with vertical lines every 3 cm. Make cuts along them 5 cm from the bottom. These will be the field mounts.

After connecting the top along the marked strips, cut all the strips in half and bend them inward. Cut out two identical circles. One will serve for the volume of the hat, and the other will cover it. For the fields, prepare an oval shape. At the same time, you need to prepare the fabric for decoration. Once assembled, the hat will be difficult to decorate.

Insert the cylinder into the fields and glue it together. Attach the first circle to the concave strips in the upper part, and stick the second circle on top. To make the brim slightly raised, you need cardboard

Carnival hat cylinder made of cardboard

Is carnival coming soon? Will your child be dressed as a magician or a gentleman from London? Or maybe she will be a real lady who cannot go out without an elegant miniature hat? Then you definitely need to learn how to make a cylinder hat out of paper. Of course, plain paper will not work for this job. The material should be denser, it is better to use cardboard.

What else is needed for this job:

the main material (cardboard) is selected according to the theme of the future costume;
pencil for making marks;
PVA glue;
adhesive tape;
fleece;
To create a beautiful shimmer, use varnish and a wide brush.

Before you make a paper hat with your own hands according to the instructions, you need to prepare for the upcoming work. It is impossible to make a top hat without measurements, of course, unless it is a miniature hat to decorate your hairstyle.

You are required to:

measure the circumference of the child’s head with a sewing meter;
think about what height of the finished product you need; making a very high cylinder is not recommended, it can cause discomfort when worn.

Now we’ll explain step by step how to make a paper hat with your own hands:

We transfer the obtained measurements onto paper. The first thing to do is to cut out a cylinder (the top part of the hat) according to the circumference of the head.
Based on the resulting cylinder, we cut out the bottom and crown. Glue the parts together (Step 2)
Let's start making the cylinder fields. We attach the blank to the cardboard and trace it. We cut out several identical parts. The second part will be attached to the crown of the finished cylinder. Don't rush to cut the first one. Draw another circle inside this circle with a diameter smaller than that at the base of the workpiece. We cut out the parts and cut the inner circle with a large fringe. Glue the elements together.
Almost done. You need to attach the previously obtained “teeth” to the base with glue. To ensure that the finished hat fits tightly to your head, glue a layer of fleece inside.

For a spectacular result, coat the cylinder with varnish and leave until completely dry. Now you know how to make a cylinder hat out of paper with your own hands. But this option is suitable for little gentlemen, but what about ladies?

Pirate

When a child wants to feel like a real sea robber, it will be useful to learn how to make a paper pirate hat with your own hands. In fact, the algorithm is simple:

Cut out a square from black paper.
Fold the sides inward to form a circle.
We make the fringe: fold a strip of white paper in half, make small cuts along the entire length and twist it with scissors.
Glue the fringe to the hat along the entire diameter.
We mark three equidistant points on the product and bend the semicircles upward.
We decorate with paper feathers and a pirate emblem.
We fix the elastic band.

The elastic band can be disguised with a beard and hair, making the image even more intimidating.

Small elegant top hat for girls

The following instructions from megamaster.info will tell you how to make a paper hat that will decorate any holiday outfit. It is attached to the hairstyle using hairpins or a hoop. This accessory can be used not only by children, but also by adult girls. Such mini cylinders can be a good solution for photo shoots.

Prepare before work:

thick cardboard;
PVA;
glue stick and gun;
ruler;
corrugated paper;
paper for working using the quilling method;
braid;
scissors.

Before manufacturing, as in the previous version of the cylinder, we need to decide on the dimensions. There is no need to measure the circumference of the child’s head; the work can be done “by eye”. For those who are engaged in such creativity for the first time, we recommend using standard sizes; we will indicate them during the work.

And now the instructions on how to make a miniature paper hat:

Small elegant cylinder (Step 1)

Take a ruler and pencil. Draw a strip on the cardboard with a width of nine centimeters and a length of forty-two centimeters.
On the resulting strip we draw small stripes on the bottom and top. From the edge, each line drawn should be from one to two centimeters. Using the resulting strips, we cut out the cloves. They will help us glue all the resulting components together.
We fold the strip and secure it. Use glue. We recommend using a stapler, this way the work will be stronger. We cut off the resulting excess part during the folding process. (Step 2)
Make two circles. It is very important that they are level and match the required size. The first diameter should be twenty centimeters. It will be used as the brim of the hat. The size of the second circle should be twelve centimeters - this is the top of the product.
We take a cylinder that has already had its teeth and the largest circle cut out. We glue the blanks. Start from either side. After this you can glue the bottom of the hat.

Externally, the cylinder may seem ready. It needs to be decorated. We use corrugated paper and quilling techniques. After practice, you can indulge in fantasy.

So:

(Step 3)

We cut out a circle from paper, it should be smaller than the base, and apply it to the cap. We wrap the excess part inside and secure it with core glue. We decorate the top of the mini cylinder with braid;
We make flowers. Use paper that matches the color of the hat. Use a special stick to twist the strips. Form flowers. Use the same principle to make the leaves. Glue the resulting products to the cylinder.
To prevent the finished accessory from falling off your head, attach it to a hoop, you can use an elastic band or braid.

This is just an example of work, you can make the product any way you want, with larger or smaller margins and decorated as you wish

Witch hat for Halloween

For the base, a cardboard base is suitable - a large popcorn glass. You need to glue as many strips of corrugated paper to the bottom as possible. After the glue has dried, collect the strips of paper into a tail.

At the bottom, along the edges of the container, make holes and thread an elastic band through them. Fix firmly.

Cap

Suitable for the costume of an astrologer, Pinocchio, fairy.

Note!

DIY necklace: how to make it quickly and easily from scrap materials (160 photos)

How to make beads with your own hands step by step - an easy master class with photos and descriptions

DIY pencil case: a detailed description of how to make a unique pencil case for school

The simplest of all options, this is the basic version for creating multiple models.

Using a measuring tape over the ears and above the eyebrows, measure the circumference of the head.
It is necessary to make a cone, this can be done either using mathematical calculations or the fastest method - folding a sheet of whatman paper into a cone, where the outer part of the cone is bent, glue is applied and the seam is pressed tightly for better adhesion. A measuring tape with the circumference of the head marked is placed on top of the rolled cone. Markings are applied and excess is removed with scissors.
The cone is decorated and decorative elements are added.

If desired, the cap can be turned into a Dunno hat or a wizard’s hat - for this:

A circle is marked and cut out - future fields.
You need to make cuts at the bottom of the cone, then bend the cut parts inward, place the cone in the center of the circle and draw around it with a simple pencil. Cut out the resulting smaller circle.
Bend the parts that were previously bent inward outward and apply glue.
Place the prepared disk with the hole on top of the cone and press tightly to the cut parts with glue applied.
Decorated as desired.

Wizard Stargazer

Winter Christmas parties are not complete without this wizard. The bright sparkling Stargazer hat is easy to make with your own hands. A cap is made from sparkling shiny gift paper.

First of all, cut out a dense piece. Place the leg of the compass in the corner and mark the arc. The number obtained by measuring the circumference of the head is plotted on it. Throw 2-3 cm for fastening.

The blank is placed on the wrapping material, outlined, cut out, and secured with tape. On the reverse side, in the corner, tinsel collected into a “bubo” is attached so that it extends beyond the cap. You will have to help glue the edges together. Decorated with 12 large stars and tinsel along the bottom. The last step is to attach the elastic. Beauty!

Dunno Hat

The photo of a hat made of paper, repeating the headdress of the fairy tale Dunno, beloved by many children, attracts with its amazing similarity to the drawn original.

If desired, you can make this accessory yourself:

Measure the child's circumference and draw a circle according to the dimensions.

Step back 2 cm from the circle and cut out.
On a two-centimeter strip, make cuts every 3-4 cm.
Step back at least 25 cm from the inner edge and cut out the brim of the future hat.
Visually divide the previously cut circle into three triangles and cut out one of them.
We make notches on one of the sides.
We roll the cone and attach it to the hat using fastening cuts.
We paint the entire surface with blue paint or cover it with fabric.
We cut out a tassel from corrugated paper and “hair” characteristic of Dunno from yellow paper.

It is advisable to complement the fairy-tale image with a blue tie, which is also easy to cut out of paper according to the template provided.

As you can see, most hats are made according to an identical pattern, so often you just need to stock up on an appropriate photo example, patience, try to break the hat down into its component parts and make a beautiful accessory for any occasion.

Let's create a cylinder a la Pushkin

You will need: glue, tape, whatman paper, paper or colored fabric, scissors. Draw a rectangle on whatman paper, cut it out and wrap it in a tall pipe. The height is selected according to preference.

The pipe must be glued with tape or glue. Then follow the diagram we presented and cut out a small circle from a piece of whatman paper.

NOTE!

Paper dress - 85 photos of the best ideas and tips for choosing a stylish and modern dress
Paper daisies: 85 photo ideas on how to make beautiful paper flowers with your own hands
Paper hyacinth - step-by-step description of how to make a beautiful paper flower with your own hands (105 photos)

Provide notches for gluing and connect the parts of the cylinder. Then glue the brim, created according to the same principle as the top of the hat.

The cylinder is easy to decorate according to your imagination. You can add a couple of chic feathers.

Corrugated paper sports cap

Necessary materials:

Corrugated paper with vertical folds for the base
2 corrugated paper strips in contrasting color
1 ribbon of thick paper or thin cardboard
Lace or braid
Decorations (eg paper applique)

Operating procedure:

1. Fold a sheet of corrugated paper in half, iron the fold and unfold it.

2. Apply a thin bead of glue directly below the fold line. It is better to use thick, non-spreading glue.

3. Place cardboard tape over the adhesive. Its top edge should coincide with the fold line of the base, and a little corrugated paper should protrude on both sides. Fold these edges over the sides of the tape and glue to it.

4. Apply a thin bead of glue along one edge of the contrasting colored paper tape.

5. Glue the tape along the top edge of the base so that its clean edge (without glue) matches the edge of the base.

6. Fold the bottom edge of the base up and glue the second corrugated paper tape over it.

7. Make a fringe along the entire top edge, capturing both the base and the ribbons.

8. To make a flap along the bottom edge of the hat, simply fold it up 1 or 2 times the width of the cardboard tape inside.

9. Now wrap the piece around your head from the lapel side, measure and cut off the excess warp on one side. Don't forget to leave a small seam allowance for gluing.

10. Glue the hat in the lapel area or fasten it with a stapler. Cardboard tape placed between the layers of paper will prevent it from tearing.

11. Place the hat on your head and carefully gather the top part into a bun. Tighten it with braid or lace and fluff out the fringe.

12. Decorate the lapel with paper applique or other decorative elements as desired.

Master classes on creating a hat

Today, the following types of hats are most relevant for children's parties:

Dunno paper hat.
Pirate headdress.
Hat for a hussar.
Women's hat for a beauty contest.
Original sombrero.

All submitted works are accompanied by detailed instructions with step-by-step descriptions of actions.

What paper can you use to make a hat?

Paper hats are good to make because you can use almost any large enough piece of paper you have on hand as the base material, for example:

full spread of the newspaper;
A4 sheet of cardboard;
a piece of paper wallpaper;
office or landscape paper;
colored paper or cardboard.

Important! Do not use paper that is too thin or soft - it will not hold its shape.

Repair hat made from newspaper

During repairs, construction dust and plaster tend to settle on the hairstyle. To prevent this, you can make a simple boat hat from newspaper.

And it is simple precisely because it is really very simple to put it together:

Fold a sheet of newspaper in half. Mark the middle longitudinal line of the sheet by bending it in half lengthwise.
Considering the fold of the sheet as the top, bend the upper corners to the middle line.
Bend the bottom strip outward butt to the bottom line.
Fold the bottom corners of the lapels.
Fold the flaps up from the outside.
Pull the center points of the bottom. You will get a square.
Fold the bottom corners outward, bending along a line slightly below the center of the square.
Pull the center points of the bottom again.
Fold the flaps outward again.
Grasping the corners, pull them apart.
Add volume to the hat.

Having learned how to make such a headdress, you will not have to worry about your hairstyle during any dirty work.

How to make a hat with a visor from a newspaper with your own hands

Another interesting version of a newspaper headdress is a cap.

It is also done by folding paper without using scissors and glue as follows:

Fold a sheet of newspaper in half. Fold the top corners, closing them in the middle.
Fold one of the bottom strips in half.
Bend it from the outside, forming a side.
Turn the workpiece over and bend the protruding corners of the side. Fold the sides, forming the size of the future cap.
Fold the bottom strip up to the hem line.
Fold in the bottom corners.
Tuck the free corners of the curved triangles inside the side.
Turn the workpiece over and bend the top corner.
Tuck it under the side.
Straighten the cap and give it volume.

This cap can be worn on a sunny day somewhere in the country.

Paper cylinder

The young gentleman will definitely love the paper cylinder.

To make it you will need a sheet of colored paper. You can take the packaging. And also a thick paper or cardboard sheet of A4 format, scissors, glue, paints, a pencil, two circles of different diameters.

After preparing everything you need, you can start working:

Cut a strip from a colored sheet. The width of the strip is the height of the future hat, the length is equal to the circumference of the cylinder.
Roll the strip into a pipe and glue it together.
On a sheet of cardboard, draw two circles of different diameters with a common center. The inner circle should be equal in diameter to the glued pipe. The difference between them is the width of the cylinder fields.
Color the resulting fields and cut them out.
Cut the bottom edge of the pipe into a fringe 1 cm deep and wide.

At this stage, all the parts are ready, all that remains is to connect them. To do this, you need to bend the fringe of the pipe outward, put the cut ring on the pipe and glue the fringe along its lower side.

On a note! For a neater look, you can cut out a second ring and glue it underneath, covering the fringe.

You can diversify the hat with additional fun decor.

Paper helmet like a samurai

Some boys, having watched enough cartoons or read comics, begin to bring them to life in games. If their hero is a samurai, then a scheme for making a samurai cap will definitely not hurt you. Just before starting work, prepare square-shaped paper, where all sides are the same length.

Explanation of the scheme:

Connect the diagonal corners of the prepared square to form a triangle. Make a square out of it by turning the sharp corners towards the top of the figure;
Bend the corners located at the bottom of the front side towards the opposite corner. After this, perform the action again with the upper corners folded upward. With this you will form “ears” that protrude beyond the edges of the cap;
To complete the Japanese cap, fold the corner of the top layer, which is located at the bottom, so that it slightly overlaps the wrapped elements of the workpiece. Fold the bottom over a second time to create the desired shape;
Turn the craft over. Bend up the extra corner there on the other side. Now you can unwrap the hat and put it on your little samurai hero.

Square cap

An unusual version of the cap, which fits tightly to the head and has a visor.

Fold the newspaper in half and then into a quarter to locate the center line.
Open it up and make a triangular roof.
First fold the rectangular strips into 2 halves, then bend them.
Turn the model over and bend the edges from the sides towards the center of the model.
Let's fold regular triangles in both corners.
We bend the triangular roof and tuck it in.
Open the model and align it to form a square.
Rotating, bend the corners, open.
We turn 4 corners. The result is a hat in the shape of a box.

Paper skullcap

You can create a skullcap with your own hands from hard paper or printing sheet, which is folded in 2 layers for greater density. It is made according to a pattern similar to folding a cocked hat, only in the case of a hat the outer corners are folded completely, and in a skullcap the upper corners are turned away at a short distance from the middle. The workpiece is trapezoidal in shape.

If you need a headdress made of cardboard in an oriental style, the headbands are decorated with a beautiful pattern. You can paint it yourself with artistic paints or paste it over or trim it with ribbons with colored embroidery.

When the side triangular protrusions are pulled out, the product turns into a jester's cap. If you pull out another protrusion and straighten all 3 corners, the skullcap becomes an academic cap.

Paper samurai helmet

Without glue and scissors, you can make a samurai helmet from just one piece of paper for a children's party.

Instructions for assembling a paper helmet:

Take a square sheet of paper.
Fold it first along one diagonal, then along the second.
Close the sharp corners in the resulting triangular figure.
The bottom edges of the top layer are folded upward.
Bend the resulting folds symmetrically on both sides.
The lower part of the top strip is folded slightly below the line of the future bottom.
The bottom layer is folded onto the bent corner.
Turn the product over and make a fold along the bottom line.

For little cowboys

To make such an accessory, you must first take measurements. The hat consists of two parts. The length of the crown and the diameter of the oval for the brim should correspond to the circumference of the head.

The height of the crown is equal to the length from the crown to the forehead. The crown is the part of the hat that covers the head.

Step-by-step instruction:

On a sheet of thick cardboard we draw a rectangle-shaped crown. You can use ready-made ideas; templates are given below.
Add 2 cm on three sides.
Cut out the workpiece.
For the margins, cut out an oval.
Glue the parts together.
Glue the lace on the inside.

If desired, cover the cowboy headdress with colored paper and fringe.

You can make a cylinder in the same way. In this case, the crown of the hat will be in the form of a cylinder and larger in height.

Paper cowboy hat

A cowboy hat will be much stronger if it is made of dense material covered with paste or glue. To add realism and volume, the product is decorated with artistic paints. It can be worn to holidays and children's events. For a hat with a large brim, you will need pre-prepared patterns.

How to Make a Newspaper Hat: Step-by-Step Guide

Typographic sheet is considered the most common and versatile material from which any hat can be constructed. Medium-thick, large-format newsprint folds well. If you need to make a denser product for your head, use paper folded in half.

The best things to make from newspaper are a painter's cap and a cap with a small protrusion in the form of a visor.

How to make a painter's hat from newspaper

A newspaper hat is an indispensable thing for a painter. During production, the paper is tightly rolled, so the product will last throughout the working day. Even if the paper hat gets damaged and becomes unusable, it will only take a few minutes to make a new one. All manipulations are carried out according to the scheme.

Guide on how to make a hat from a newspaper in the form of a cocked hat for repair:

The newspaper is folded in half and placed with the fold line facing up.
Fold one bottom strip of paper, then the second.
Bend and join the 2 upper corners.
Level the lapel lines with your hands.
Fold the strip over again.
They move to the other side.
The edges with protruding corners are folded on both sides.
Leveling the layers, make 3 turns at the bottom of the product.
To maintain the shape, the edges of the workpiece are folded inward.
Straightening out.

The hat is ready to wear. In a similar way, you can make a cap using the origami technique. To do this, in step 4, the upper edges are folded not to the connection line, but with a slight indentation.

How to make a hat with a visor from a newspaper with your own hands

Technology for making a paper cap with a visor:

Lay out the paper on the table.
Bend the 2 upper corners.
Smooth out the edges.
Fold the bottom layer of the top sheet.
Bend overlapping again. This procedure is performed on one side of the cap only.
Turn the figure over to the reverse side.
The protruding corners of the rolled layer are folded inward, then moved to the edges.
The edges of the workpiece are bent vertically on the right and left.
The strip is wrapped at the bottom.
Bend the bottom at an angle to the fold line, tuck it into the folds.
Turn the workpiece over again.
Fold the top corner horizontally.
Tuck the top of the hat.
Straighten the product. It has 2 corners, 1 of which needs to be folded and tucked inside the folds.

A newspaper cap with a visor protects your head from solar heat and construction debris and dust during repairs. The cap is also made from wrapping paper, then painted and appliquéd.

Hat with brim

It won't be that difficult to make a hat with a brim. Moreover, the detailed diagram will become clear to school-age children.

Let's describe the entire algorithm for creating a hat.

Take any newspaper and make a square piece out of it. Bend this sheet in half, and then in half again so that the bends are outlined;
Then unfold the paper so that you are left with a double rectangle. Tuck the hidden corners inward, but do not connect the folds along the edges;
Open the last folds from the inside and press a little along the entire workpiece. Turn the workpiece with the wrong side up, following the fold lines, bend the edges towards you, and then fold the “sides” here on all sides;
Straighten the hat, press it down a little and you can wear it for an evening walk.

Tips for working with paper

To make your creative work satisfying, you should heed a few tips:

you need to start creative work only in a good mood;
You should be responsible when choosing a place for creativity: nothing should interfere, there should be enough space and light;
When working with paper, you need to keep your hands clean so as not to leave marks on the product. If you have to deal with glue or paints, it is better to immediately prepare wet and dry wipes;
you need to remember that scissors are a sharp tool, you should not leave children with them unattended;
Before folding life-size origami, you should practice on a “draft” - an unnecessary sheet of paper;
For a homemade hat to look good, all lines and folds must be neat and symmetrical.

Following these guidelines will help you have fun and enjoy paper crafting.

Sources

https://tkaner.com/golovnye-ubory/shapka/kak-sdelat-shapku-iz-bumagi/
https://my-pic.ru/uyut/kak-sdelat-shapku-iz-gazety.html
https://samodelki.org/kak-sdelat-shapku-iz-bumagi/
https://kuhniug.ru/stirka/kak-sdelat-shapku-iz-bumagi.html
https://floridei.ru/tvorchestvo-s-detmi/kak-sdelat-shlyapu-svoimi-rukami-iz-bumagi.html
https://vsepodelki.guru/shlyapa-iz-bumagi/
https://megamaster.info/kak-sdelat-shljapu-iz-bumagi/
https://tytpodelki.ru/shlyapa-iz-bumagi/
https://rukodelieinfo.ru/shlyapa-iz-bumagi/
https://www.promyhouse.ru/rukodelie/izdeliya-iz-bumagi/delaem-bumazhnuyu-shlyapu.html
https://www.tkaner.info/golovnie-ubori/shapki/kak-sdelat-shapku-iz-bumagi/
https://PosudaIzKamnya.ru/iz-bumagi/shapka-iz-a4.html

[collapse]