Why does an air mattress deflate if there are no holes in it?

Sometimes recently purchased air mattresses begin to lose their appearance immediately after purchase for unexplained reasons. There are several explanations for why an air mattress deflates if there are no holes. After prolonged use, deflating is natural, but in some cases it may indicate a malfunction.

A deflated mattress can be repaired if you find the cause of the air leakage.

How to lay a sheet

It is most convenient to make a bed with a two-chamber structure - the sheet is simply secured between the two chambers on all sides. For other beds, you can use a cover sheet with elastic bands around the edges, pulling it in all directions and straightening it carefully. The velvety covering of the beds resists slipping and helps keep the sheets on the surface of the mattress.

Intex air beds are exceptionally comfortable; sleeping on them is as comfortable as on a regular bed. Models designed to resemble a regular bed have a mesh of air cells connected to each other, which promotes even distribution of air inside. A bed with air cells is particularly rigid and stable.

In order to provide your body with maximum comfort while you sleep, you can choose a bed with an orthopedic mattress. Transverse ties in the upper part and longitudinal ties in the lower part of the orthopedic bed provide support for the spine. People who have problems with the spine can sleep on a high-quality Intex bed with a support system in the form of cylindrical or longitudinal inserts.

We suggest you read What to do if you start chewing gum

Deflating the mattress

In order for the product to retain its positive qualities for as long as possible, you also need to know how to deflate an air mattress correctly. In modern mattress models, this issue is resolved quite simply, because they are equipped with large special valves through which air escapes very quickly. Press lightly on the surface to speed up the release of air, but not too much as this can damage the seams. You can also use a pump for these purposes - then the process of deflating the mattress will be very fast and safe.

An air mattress is an extremely useful and necessary thing in the household. This is a “lifesaver” in case guests spend the night, an extra sleeping place, which when folded takes up no more space than a bag, an irreplaceable thing at the dacha or on trips to nature. But if an air mattress deflates, how can you find the hole? Sometimes the search is similar to finding a needle in What if you try the proven methods that we want to offer you?

How to inflate an air mattress in different ways

An indispensable thing in every home is an air mattress. Most advertising campaigns talk about using them for visiting guests or at the dacha. But in fact, this is a wonderful lifesaver in different situations. For example, if you need to clean a sleeping area. It takes time to do this correctly. The same applies to moving, until the furniture is imported, you can use an air mattress. It must be said that modern manufacturers have taken care of the good quality of the material and even the coating. Most PVC air mattresses have a velvet surface. It not only gives a pleasant feeling even without an additional cover, but also makes sure that the sheet placed on the mattress does not simply move out.

You can choose an air mattress in any store with similar products and even in a hypermarket. Often, especially in the summer, many large retail chains display these products. I must say that such a mattress is also convenient to take with you on a trip. It allows you to place it not only indoors, but also on the ground, provided there are no obvious sharp objects there.

Why does an air bed deflate?

Inflatable beds from the manufacturer Intex are in great demand among buyers, as they combine several important advantages.

When deflated, they take up very little space, so they can be stored in a closet or a specially designated place. Light weight and compact dimensions allow you to take this bed with you on a trip or short trip. And if necessary, in just a couple of minutes it turns into a convenient and comfortable sleeping place.

Air beds are often used as a backup option in case guests decide to stay overnight. They are also purchased by those who want to get a comfortable and spacious place to sleep and relax for little money.

How to choose

So, how to choose an air mattress for sleeping? The main parameters by which you need to do this:

• device, sectionality;
• weight;
• maximum load;
• dimensions;
• material for manufacturing;
• design;
• additions.

Device, sectionality

First of all, you need to pay attention to the sectionality of the product or stiffener. They can be longitudinal or transverse (cellular). The former are short-lived with constant use, the latter are more reliable

The secret lies in the laser stitching of the vertical inserts. They have a higher orthopedic effect, as they distribute the load on the spine and provide restful sleep

The former are short-lived with constant use; the latter are more reliable. The secret lies in the laser stitching of the vertical inserts. They have a higher orthopedic effect, as they distribute the load on the spine and provide restful sleep.

Weight

This parameter is important in cases where you take a mattress for camping conditions. In this case, it is better to take a product without a built-in pump. Usually this device is required not only for the bed, so it is taken separately on a hike. If the air bed is intended for use at home, you can take it with a built-in device.

Maximum load

The strength and durability of a mattress is directly related to the loads for which it is designed. On average, a single can withstand up to 120 kg, and a double can withstand up to 200 kg. But when purchasing, it is better to look at the product data sheet.

Dimensions

They are directly related to the number of beds. There are mattresses:

• single;
• one and a half;
• double.

The smaller the dimensions of the product, the lower their weight, maximum load and cost. Their length is approximately the same - about 2 m.

When deciding on the parameters, you need to start from where this sleeping place will most often be used (in a tent, at home, outdoors), how much space you have there.

Material of manufacture

Basically, PVC and other synthetic materials are used to make air mattresses, but a special coating is used on top, which prevents the bed linen from slipping. In addition, if you decide to rest on it without covering it with anything, such material will be much more pleasant to the touch. But hiking options have different coatings.

The main synthetic materials from which mattresses are made are:

• Waterproof Vinyl: Flexible flock that feels like velor. It is he who holds the bed linen during sleep, preventing it from becoming wrinkled. But it is difficult to clean when sand gets on it, and at low temperatures it becomes hard.
• Plastic: a smooth surface that does not retain sand, dust, or dirt. It washes well, does not allow water to pass through, but does not hold coating materials well. Suitable for a couple of nights' stay.

To make sleeping on such mattresses comfortable, it is recommended to put a mattress pad on them or lay a blanket or blanket.

Remember that if you bought a product with velor in winter, do not unwrap it immediately when you get home. Allow the material to warm up for two hours, otherwise it will deteriorate when unrolled.

Design

Manufacturers quickly respond to market needs and constantly release new products with different designs. For example, you can find products with headrests that replace pillows. There are models with high sides that prevent them from rolling onto the floor in your sleep. And this is not to mention all sorts of color variations.

Accessories

To use a mattress, it must first be inflated. Given its size, this process will take a lot of time if done manually. Therefore, some mattresses are sold with a pump built into the body of the product. Then it inflates automatically when unfolded.

Others are equipped with an electric pump that works not only from the outlet, but also from the car’s cigarette lighter. Cheaper models are available with mechanical pumps that are operated by hand or foot.

Each of these devices has its pros and cons. For example, a mechanical one can be used anywhere, and it rarely breaks down. You can also purchase replacement attachments for it, increasing the scope of its use. The electric model allows you to quickly and effortlessly fill a fairly voluminous product with air.

Can an Intex air bed deflate?

In the process of using air beds, their owners may encounter situations when the product begins to gradually lose its volume and release air, or, in simple terms, deflate.

As a result, a person who uses such a product begins to experience some discomfort while sleeping. And he has to fill the bed with air again from time to time in order to give it the necessary rigidity and elasticity.

Naturally, the owners of such products are interested in whether it is normal for an air bed to deflate and what should be done in this case. To answer this question, it should be noted that it depends on how often you have to re-inflate it.

For example, if a bed begins to lose volume a few weeks after you start using it, then this is considered normal.

The fact is that the air inside the product can gradually escape through microscopic holes in the polyvinyl base of the product. As a result, the bed becomes less comfortable to use and loses its rigidity.

Therefore, it is important to periodically pump it up as it is used.

. The most convenient way to do this is with the help of a proprietary manual application from Intex.

In addition, it is very good if your bed is already equipped with an automatic electric pump, because you will not need to take any action.

But you need to remember that if your air bed deflates too often and very quickly, then this is no longer the norm. In this case, you need to find the cause of the defect and try to eliminate it.

Why does an air bed deflate?

Let's say you went to sleep on a fully inflated bed, but woke up to find that it was already more than half deflated. This could happen for various reasons. The most common is the appearance of a small hole in the product through which air escapes. The hole can be very small, which makes it difficult to find it by sound or external signs.

More often

Such damage occurs on air beds due to careless handling or when the product comes into contact with pets. For example, your cat’s claws could easily perforate a thick layer of polyvinyl chloride. Therefore, the manufacturer recommends covering the airbed with a protective blanket or other materials if there is a risk of damage due to contact with animals.

Another reason

- This is a manufacturing defect. Unfortunately, it occurs in almost any area of ​​production. If you just recently bought an Intex air bed and noticed that it has started to deflate, then you can return or exchange it under warranty. To do this, it is important to keep the original sales receipt of the store where you purchased the product.

What to do if an air bed deflates?

If your bed is not under warranty, you can try to repair it yourself by repairing the damage. First you need to find the place where the puncture is located. To do this, you can use soapy liquid or simply place the product under water. Having determined the location of the leak, it is necessary to glue a patch made of durable rubber material onto it. To do this, it is best to use household superglue, which is sold in stores.

Where to start

So, how to inflate a mattress without a pump? The first thing that usually comes to mind is using the power of your own lungs. It is quite possible to pump up a small model without the use of additional equipment or devices.

Reference! Two adult men can inflate a mattress this way in about 20 minutes. When changing, do not forget to disinfect the valve hole!

However, it is worth understanding that for one person this is a rather complex process. Untrained lungs and heart can fail. The result is dizziness and increased blood pressure. In addition, it is unlikely that it will be possible to inflate the product to the optimal degree of density using the lungs alone.

Peculiarities

To quickly deflate an air mattress, you will need to adhere to a whole set of requirements. But at the very beginning, the surface is prepared for storage. To do this, the material is cleaned with soapy water without aggressive chemical cleaners. The surface of the product dries completely on its own without the use of any heaters.

Particular attention is paid to the valves on the mattress through which air is released. There are 3 options for these products:

1. Classical.
   First, the product protection is unscrewed, after which the valve is slightly compressed to allow air to escape. A common technological solution due to its combination of simplicity and reliability.
2. Bicycle.
   The valve is compressed on both sides with your fingers or using a match, we press on the nipple in the central part. The product is twisted by two or more people, because it is impossible to do it alone.
3. Removable.
   This valve model stands out for its simplicity among analogues, because to activate it, you just need to unscrew the plug, after which the mattress deflates itself as quickly as possible.

A single product deflates in 10-20 minutes, after which it is packed in a special bag or other structure for subsequent storage. You cannot leave an air mattress in direct sunlight, as this will cause it to quickly deteriorate.

Before asking how to blow air through a valve from an air mattress, let’s take care to eliminate common mistakes in advance.

Most people in such a task make the following inaccuracies:

1. Surface.
   It should be as even as possible, because this will eliminate even slight retention of air in the product.
2. Items.
   When deflating, the likelihood of punctures and cuts is especially high, so sharp objects must be removed away.
3. Heaters.
   Sources of high temperature deform the rubber base of the product, so it is advisable to move them away from the assembly site.
4. Minus.
   Freezing temperatures destroy rubber and a number of other materials, which is why they should not be kept indoors.
5. Pumps.
   Only special models with low pressure are used, because in this case ideal air removal is ensured without damage to the elastic structure.

Avoiding them is quite easy if you prepare in advance and don’t rush. Before sending each air mattress for storage, we carefully inspect it for damage and stuck objects, so that when waiting for the next use, the condition of the product does not deteriorate. In this case, the result always turns out to be expected.

Ways to check the integrity of an air mattress

• Pay attention to the seams. The problem often occurs in these areas;
• Then carefully examine the surface of the bed.

1. Inflate the mattress strongly and listen, the whistling sound allows you to accurately identify the problem area. You can also wet your hand with water; a slight chill touching your palm (with smooth movements over the product) is a sure sign of a flaw. Outline the hole with a marker;
2. Lower the inflated bed into the water. Bubbles rising to the surface indicate that the search was successful. Use chalk to avoid losing the puncture site;
3. Using a spray bottle, spray the inflated mattress with soap foam. Bubbles will indicate the root of the problem. Make the necessary mark;
4. Prepare a solution of detergent and water. Pour the mixture into the deflated product, then pump it up a little. The composition will help you find the hole you are looking for. Don't forget to highlight the damaged area.

Sequence of repair actions

• Determine the puncture site. It is usually unnoticeable. And if by ear it is not possible to find a place for air passage, then the mattress is placed in a container filled with water or filled with soapy water. Statistically, less time is spent on the repair itself than on searching for a crack or puncture.
• The damaged area is treated with fine-grained sandpaper. Then wipe with acetone or other disinfecting solution.
• The flocked mattress covering (velor, pile) is removed using a solvent or alcohol. After drying, the lint is removed using a sharp knife or other similar object. The surface should be cleaned again.
• A patch from the repair kit or a cut out circle of rubber should be applied to the puncture site and outlined with a pencil.
• Apply a thin layer of glue along the contour drawn on the mattress. Which glue to choose was discussed in the article earlier.
• After applying the glue, it is advised to wait 10-15 minutes. Then apply a second layer of glue and also wait a little. When the glue sticks, apply a patch to it. If the room is cold enough, it is recommended to warm up the patch and the damaged area of ​​the mattress with a hairdryer before starting repairs.
• The glued piece of paper should be pressed down with a weight or walked over it with a paint roller.
• The glue should dry within 24 hours. In this case, the mattress must not be bent or moved.

To make the mattress look like new, patches are often glued on the inside. To do this, the damaged area should be turned out through the valve hole. All further operations are similar to those described above.

Moscow, st. Stary Gai, 1, k1.

Departure to the customer.

How not to inflate a mattress

If you went out into the countryside and only there realized that the pump had failed or the device was left at home, do not rush to pump the product with exhaust gases. At first glance this may seem like a great idea. If you inflate the product in this way only once, nothing “deadly” will happen. But regular inflation of the mattress with exhaust gases can result in the destruction of the inflatable product.

The fact is that carcinogens have a detrimental effect on the structure of the material from which mattresses are made. In addition, during pumping, the person managing the process will inevitably inhale some of the carcinogens, which can be very harmful to health.

What is better mattress Intex or Bestway?

Considering the positive and negative aspects of these brands, we can come to the conclusion that they both deserve attention. Answering the question: “Which is better: the Bestway or Intex mattress?”, most experts recommend giving preference to the first.

Interesting materials:

How much money goes from 1xbet to the card? How much money does it take from the card to the current account? How many cards should there be in UNO? How many cards of the same suit are in a 52 deck? How many cards of spades are in the deck? How many cards are there in blitz? How many maps are there in Hearthstone 2022? How many cards are in a royal flush? How many cards are there in table lotto? How many cards are there in Scholomance?

Gluing the patch

Before gluing an air mattress using a repair kit or using improvised means, it is important to carefully read the instructions for the glue and read all the manufacturer’s recommendations.

The standard sequence of work when gluing a patch is as follows:

• Apply glue to both surfaces, being very careful so that the product does not get inside the mattress;
• Wait for the period of time recommended by the glue manufacturer - from 2 to 15 minutes;
• Carefully align the parts and press them tightly together for 10-20 seconds for reliable adhesion.

Depending on what kind of glue the mattress was sealed with, the junction of the parts must be additionally placed under a press for a period of 3-4 hours to a day (the need for this is indicated in the instructions).

How to prepare a surface for a patch

Before you begin to directly repair the air mattress, you need to properly prepare the area for the patch. The effectiveness of the repair and its durability largely depend on this.

The product must first be blown off and dried well. The puncture site is cleaned of dirt and degreased using alcohol, acetone, white spirit, and gasoline. If you don’t have any of this at hand, you can use cosmetic nail polish remover.

If the patch will be installed on the velvet surface of an air bed, then you must first remove the lint in this place. To do this, a solvent is applied to it, and after 2-3 minutes the surface is cleaned with any blunt object. You can use fine sandpaper, but be very careful and careful to prevent new holes from appearing.

How to deflate a sleeping place correctly

When inflating, you can use a special pump or some available means, but in order to deflate the mattress you need to create certain conditions and put in a little effort. Regardless of the brand of the product, the principle and rules for deflating a bestway, Intex or any other mattress are the same.

First of all, we will consider those factors, the presence of which will help to lower the product correctly:

• Smooth surface.
• No sharp objects.
• Lack of heating appliances.
• It is strictly forbidden to use automobile compressors or other devices where high pressure is present.

Inflatable upholstered furniture, especially mattresses, are in steady demand. Expensive air mattresses are usually equipped with a pump (built-in or a separate item). In other cases, the device is purchased separately. What to do if the pump fails, is lost or forgotten, and the product definitely needs to be inflated?

Summing up

When choosing a mattress model, decide on your needs

. In any case, pay attention to the quality of the product, the reputation of the manufacturer, the characteristics of the product (the question: how to deflate an air mattress is not the last on the list of characteristics). Customer reviews can be a great help in choosing the right model.

For budget models, choose those that have an additional valve that prevents deflation

(even with the lid open). This will allow you to feel calm on the water, and using an inflatable product at home there will be no risk of waking up on a half-deflated mattress.

While pumping air, you should carefully monitor the elasticity. An overinflated mattress may become unusable due to a split seam. Some of the air from the pumped product should be released (before you start using it), thereby reducing the pressure

A built-in or electric pump with an air blowing function is the best option for large-volume and regularly used products. The disadvantages of such devices include high cost, greater weight of the product, and the need to connect to an electrical network.

Air Mattress Valve Repair

You can fix the problem using the following simple scheme:

• Remove the adjacent valve, then remove the rubber gasket;
• Sand the end of the faulty part with fine-grained sandpaper, and then lubricate its surface with a thin layer of silicone grease;
• At the final stage, insert the devices back.

Valve differences

The valve is an important part of an air mattress, which is usually classified as follows:

1. Cork. It is made of plastic, is attached to the bow and is very easy to tear off;
2. Simple valve. The hole in the part has a large diameter, making it very easy to release air from the product. Such a device can be used in combination with any pump;
3. 2 in 1. Equipment that has a complex design and is equipped with an adapter designed to bleed air;
4. 3 in 1. The part inflates and deflates the mattress, and also regulates the degree of elasticity through partial air injection.

Checking valve tightness

In order to inspect the valve for leaks, it is necessary to inflate the air bed in advance. Next, the device should be treated with a soap solution. The formation of foam will be a clear sign of a malfunction.

How to protect the valve from damage

Careful and careful handling of the product will extend the life of the mattress. In order to avoid valve damage, you will have to follow simple rules:

• Fill the bed with air no more than 80-85%. This precaution will protect the part from overload;
• Do not jump on the sleeping place. These actions put serious pressure on the valve, which causes damage to it; the seams of the mattress often burst from the strong pressure;
• Inflate the mattress using the equipment provided by the manufacturer.

Basic and deflating

There are several methods for deflating an air mattress, three of which are considered the main and most convenient.

Naturally deflating an air mattress

What does the natural path mean? This means that after opening without external physical influences, the inflatable product will deflate on its own for some time. This method is ideal if the size of your product is small. Natural descent is suitable for models that have removable valves. The air will come out very quickly through the wide hole. If the mattress is the size of a single bed, then you can completely use this method.

Valve opening

For simple models with a simple device, you just need to open the valve. In this case, you will have to wait some time for all the air to escape. It is better not to put extra pressure on such a product to eliminate the risk of damage.

Opening the damper

Squeeze the valve on the sides or move the flap inside it if it is open and air does not come out. In this model, a special mechanism is built inside the main valve. It protects the mattress from deflation if the valve cap is accidentally opened. This is why the safety flap needs to be moved. Thus, you can easily blow away models from common companies, such as BESTWAY.

Unscrewing the valve

You can unscrew the valve only after carefully inspecting it and being completely sure that it does not have separate parts for deflating air.

Original foot pump

How to deflate a mattress using a foot pump:

1. Press the pump firmly against the valve.
2. Press it with less force than when inflating.
3. The air will enter the pump chamber and then flow out through the foot pump.

Do not press the pump too hard. This will not shorten the duration of the procedure in any way.

Home vacuum cleaner

Using the principle of air injection, you can deflate an air mattress using available equipment, for example, a conventional vacuum cleaner.

You will need to select a special attachment or needle for it so that everything goes quickly and without damage.

An extreme option is a match, which should be carefully inserted into the valve, and then proceed according to the same scheme as in the previous method.

Manually

To bleed air manually, that is, naturally, you need to follow simple recommendations:

• open the valve and wait until the air comes out on its own;
• when the valve is double, you will need to remove the cover and squeeze the mechanism to move the internal valve.

Sometimes this is difficult to do. A not too sharp object will come to the rescue, which will be able to push through the additional valve.

Valve tightness check

How to determine how tight an air mattress valve is? To do this, you need to prepare a soap solution. In addition, to check you will need a soft bristle brush or a regular piece of fabric.

First, it is recommended to clean the valve for an air mattress from dust, small debris and rinse under high pressure water. In some cases, such actions already make it possible to increase the tightness of the device. After all, the mattress valve, in a sense, acts like a vacuum cleaner, drawing in clogs from the outside. Thus, between its membranes there may be layers of dust, hair, threads, etc. Debris is what most often causes an air mattress valve to leak.

After cleaning, you should dip the product, previously filled with air, into a soap solution. If the liquid begins to bubble in the valve area, then the blockage is not the cause of the poor seal. In this case, it will have to be repaired or replaced.

Deflating the mattress correctly

A deflated and folded mattress should only be stored in a clean condition.

. Therefore, if necessary, before starting the deflation process, the mattress should be washed and cleaned (especially important if the product is deflated after being used outdoors, at sea, or for a long stay of guests who slept on it).

• Use soapy water and soft textiles for cleaning.
• Do not treat the surface with aggressive chemicals, including those containing alcohol and dyes.
• Allow the surface to dry completely naturally.
• Only now begin the deflation process.

Reference! The same rules apply to swimming models.

The air from the mattress should come out evenly. The deflation process begins with the opening of the valve. In order to speed up the process, some begin to put intense pressure on the product, neglecting the operating rules. This is not worth doing. The deflation time will not be reduced too much, but uneven “jerks” as air exits the hole can damage the mattress.

Advice! If the mattress is going to be inflated and deflated quite often, it is preferable to choose models with the “Blowing out” function. Otherwise, the long deflation process will become annoying over time. The presence of this function is also preferable for very large models. To deflate an air mattress of impressive size mechanically will require a lot of time and patience.

Choosing a mattress with a built-in pump for its intended purpose

The market offers a wide range of inflatable products - mattresses for swimming and hiking, for home sleep and universal ones.

Beach . This includes all models without a flocked cover (exclusively beach) and without any type of built-in pump (usually inflated using lungs). There are also options with a flock coating on the top side, having a height of 12 cm to 25 cm and a built-in mechanical pump. Such models can be considered universal.

Important! Models with a built-in electric pump cannot be used for swimming!

For sleep . This type of mattress is covered with special artificial fiber. As a result, the top side (and sometimes the bottom and sides) becomes velvety. Flock is very pleasant to the touch and holds bed linen well. The height of some models can reach 50 cm. They look like full-fledged beds. Can be equipped with both types of built-in pumps.

Method No. 2: using a soap solution

We will act according to the following algorithm:

1. Add a little dishwashing liquid (soap solution, liquid soap, shower gel or shampoo) to the spray bottle so that there is enough soapy water to cover the entire surface of the mattress. An alternative to a “sprinkler” would be a sponge or cloth soaked in this solution.
2. How to find a hole in an air mattress at home? Fill it with air and spray, wipe the entire surface of the product with soapy water, starting again with the valve and paying special attention to the seam areas.
3. Now watch carefully - where the soap bubbles appear, there will be an air leak.
4. Trace the leak with a permanent marker or mark it with a piece of tape or a sticky note.
5. The next step is to be sure to dry the mattress 100%. Only after this will it be ready for storage and repair.

How to find a puncture or cut in an air mattress?

To detect a microscopic puncture, we recommend using one of several proven methods:

They fill the bathroom with water and lower the inflated mattress into it. Bubbles will appear in the damaged area; you should immediately mark it with a marker. If the mattress is large and a bathroom is not an option, there are other ways to check.

We inflate the mattress and apply a soap solution to it. Lightly press the product - a bubble will begin to inflate at the puncture site. Since soap stains remain after the solution and the product will have to be cleaned later, this method is used as a last resort.

The most effective method is considered to be the following: 4-5 liters of water are poured into the mattress, then it is pumped up and turned over so that the water spreads over the entire inner surface. On the velor side, a wet spot will appear at the puncture site, and on the smooth part you will notice water seeping through. The location of the damage is marked with a marker and repairs begin.

How to protect the valve from damage?

To avoid problems during operation of the product, it is recommended to pay attention to the following points:

1. Do not overinflate the mattress. It is enough to fill it 80-85%. Otherwise, excessive pressure will be applied to the valve. Over time, this can cause the seams to tear where it connects to the rubber part of the product.
2. Under no circumstances should you jump on an air mattress. This is fraught not only with seams coming apart, but also with valve elements popping out.
3. You only need to inflate the mattress using the factory pump designed for this purpose.
4. To avoid damage to the valve, it is not recommended to sleep on a mattress designed for swimming.

If the pump does not work

Burnt out from overheating.

This rarely happens - only if the pump has been running for more than 15 minutes without a break. In this case, the built-in pump will have to be replaced with a new one. Much more often, problems with the pump have other causes.

Poor contact between brushes and commutator.

As a rule, contact is broken in one place. Sometimes it is enough to knock on the cover of the switched on pump to restore contact. Another way is to disassemble the pump and rotate the manifold by hand. The third is less “traumatic” for the pump: open the pump cover, pump some air into the mattress or sofa with another pump, then pump out the air with a vacuum cleaner. When pumping out, the collector will rotate and contact will most likely be found.

What to do?

If your problem is related to a manufacturing defect and you have a warranty for the product, exchange it. Contact the store where you purchased the products. You must have a sales receipt with you that confirms your purchase. If there is no receipt, it will not be possible to prove the fact of purchasing the goods in this particular store. However, manufacturing defects are very rare and often damage is associated with other circumstances that can be avoided.

You can protect your mattress from the claws of your beloved pets by simply covering the product with a blanket or other dense material.

What materials and tools are needed?

As a rule, a standard ready-to-sell mattress is supplemented with a repair kit. It includes glue, a set of patches of various sizes and vinyl film. Additionally, you will need sandpaper (sandpaper), acetone or another solvent, and scissors.

Using these simple materials, you can repair a damaged mattress at home.

If for some reason you do not have a standard set of materials, then at home you can always find something suitable from available materials.

1. In the store you can easily purchase “Super” or “Uranus” glue. All of them firmly glue the rubber. If you are lucky enough to buy adhesive material from Intex, specially designed for repairing air mattresses, then the quality of work will be 100% guaranteed.
2. You can take an old rubber toy and cut a patch out of it.
3. This element can also be made from fabric. For this purpose, use velor, cotton base or PVC fabric. The shape of the patch should be round or slightly elongated, like an oval.

It needs to be several millimeters in diameter larger than the hole in the mattress. The prepared patch must be pre-impregnated with glue.

Step-by-step recovery instructions

So, we need to seal the intex air mattress. This task is not as simple as it might seem at first glance. Sometimes you can actually do it yourself at home, and sometimes only an air mattress repair shop can help solve the problem.

In most cases, if you know how to perform such a task, it certainly will not seem too difficult. To repair the accessory yourself, you will need to quickly determine the location of its damage.

How to find the location of the damage

Repairing Intex mattresses involves searching for the source of its breakthrough. Naturally, first of all, you need to carefully examine it. Damages of a fairly large diameter are easily identified, but small ones will require some effort.

So, if suspicious areas are noticed purely visually, then simply raise your hand to them. The flow of cold air that will come out when pressed will indicate that the product is indeed damaged at a given point. If the damaged area on the surface of the mattress is small, then its location can be determined in several ways:

1. Submerge the mattress in water. If you notice a hole near a body of water, the fastest way to determine its location is to immerse yourself in water. Inflate the product completely and lower it completely into the water. You can also seat several people on the mattress so that the product sinks under the influence of gravity. Characteristic bubbles will begin to appear on the water surface, which will help you find the source of damage.
2. Lather. We inflate the attribute to the limit and treat it with a soap solution. To do this, we need a foam sponge or a small piece of such material. After this, pour the soap solution into a cup and carefully distribute it over the entire surface of the product. If there is damage on the surface, then soap bubbles will appear in places where there are gusts.
3. Determined by sound. Those who have 100% hearing will be able to detect a puncture by sound. So, we choose a quiet room and inflate the mattress there. After this, we carefully listen to the characteristic hissing notes that will arise due to the escaping air.
4. Fill with liquid. You can also try pouring water inside the mattress. Streams will begin to flow out of the punctures, which will help you identify the hole. The main disadvantage of this method is that after using it it will be quite difficult to dry the product. It is important to note that some models cannot be used at all after such manipulations. Moreover, even if the task is completed perfectly, white streaks may remain on the inner surface of the product.

Preparing an air mattress for sealing

Before you proceed to directly sealing the mattress, you will need to prepare it. Once the damaged area is found, you will need to mark it with a marker or a piece of soap so as not to lose it.

The accessory itself must be thoroughly washed from dirt, and then wait until it is completely dry. Under no circumstances should such a product be dried on a radiator or next to other heating devices.

If the hole is located in a fuzzy area of ​​the air mattress, you will need to carefully clean the area with light-grit sandpaper. This way the patch will be pressed more tightly against the holed area.

The area to be patched must be degreased: it is recommended to use acetone, gasoline or alcoholic liquid. Careful use of these products will prevent leaving marks on the surface of the product.

Selection of materials and tools for repairs

It's time to prepare a repair kit for the mattress. The air mattress itself should be deflated, and a set of necessary tools and materials should be placed near it. So, in specialized stores and on the Internet you can purchase a ready-made repair kit, which is combined from a special patch: a transparent vinyl film and glue. The kits come with instructions that allow you to quickly navigate the principles of proper mattress restoration with your own hands.

The set itself can be purchased in advance directly at the time of purchasing the accessory itself. So, in the future you won’t have to deal with the need to search for repair equipment in all stores. The set is compact, so it can be easily carried in a small bag.

If you have not purchased such a set, then use the means at hand. So, in order to create a patch, you will need any rubber children's toy. From something unnecessary for your child, cut a piece of rubber to the required size.

To avoid buying special glue, use an adhesive mixture designed for rubber. In addition, you will need to prepare:

• sandpaper;
• glue brush;
• scissors and a marker or bar of soap to mark damage to the mattress.

Which adhesive to choose for a mattress?

Let's take a closer look at what kind of glue to seal an air mattress with. You can purchase special adhesive for mattresses at sporting goods and hardware stores.

The adhesive is supplied by default in special kits for repairing punctures in inflatable products. We also recommend using rubber glue, bicycle inner tube glue, and other adhesives.

It is important that the use of superglue for such situations is strictly prohibited, otherwise you can damage the mattress.

Selecting the material and cutting out the patch

First of all, we need to cut out a special patch to restore the damaged mattress. If you refuse to purchase a special set, try to use a patch whose thickness is as close as possible to the material of the mattress. In addition, it should be quite flexible, provided that the fold line will have to be sealed.

When cutting out a patch, make sure that it is larger in size than the diameter of the damage. This way it will be possible to completely seal the hole and ensure complete integrity of the mattress.

Seal the hole in the mattress

The amount of glue directly depends on its type. If you decide to glue the patch with thick glue like Universal Moment, then you will need to apply the composition in the same rich layer. Liquid adhesive should be applied more thinly and evenly.

The adhesive mixture itself is applied not only to the patch, but also to the damaged area. After this, it is recommended to dry the damaged area by waiting at least ten minutes. If you can’t leave the product for that long, blow on the sealed area with a hairdryer. It is important that the air coming out of the device is not hot, but warm.

Seal the seams

The damage will also need to be glued along the seam. This will help consolidate the result of the repair and significantly prolong its effectiveness.

So, this is done simply: quite carefully, but at the same time, very generously fill the soldering areas with glue. Leave them until completely dry. Again, if you don’t have time to wait, blow the product with a hairdryer on a fairly active setting.

Another way to repair a mattress if it deflates

If the product is deflated due to a faulty valve, and not the appearance of holes in it, you must proceed as follows:

1. Unscrew the valve.
2. Clean all surfaces and remove dust.
3. Remove the rubber gasket, then sand the end part.
4. Lubricate the inside of the valve with vegetable oil.
5. Assemble the valve and screw it into place.

To prevent the mattress from deflating and holes appearing on it, it should be stored in a special cover. This will ensure product protection. During deflation, it is not recommended to squeeze the mattress to speed up the process. The product must be kept away from sharp objects and animals, and not inflated too much. In this way, the service life can be extended by several years.

Cause of loss of pressure in the mattress

The manufacturer claims that a gradual loss of elasticity is normal, but only if the mattress needs to be inflated no more than once every two weeks. During operation, the device can indeed lose elasticity through small holes in the polyvinyl base.

Attention! To pump air, it is recommended to use a proprietary Intex hand pump.

For the most demanding consumer, bed models equipped with special electrical equipment are available.
But what to do if the product deflates too quickly? You should be wary when an air mattress deflates overnight. The most common reason for this is the occurrence of holes. Often the holes in a product can be so small that it is not possible to see them. They are usually formed due to neglect, or due to contact with pets.

Important! A blanket or thick material covering the air bed will help protect the polyvinyl chloride surface from the claws of your beloved pet.

Factory defects can also cause loss of elasticity. The solution to the problem in this case may be to return or exchange the product under warranty. To contact the service center, the buyer must keep the sales receipt confirming the purchase of the product.

How to find a puncture in a rubber product and eliminate the defect?

Does your pool or mattress regularly deflate during use? Even a microscopic crack can lead to such disastrous consequences. But this does not mean at all that the product has served its service life. It is possible to find and eliminate the place of descent.

In order to detect the air exit point, you will need a regular soap solution. Even if the area of ​​damage is large, there will be no problems with the search. Apply foam to the area that is most susceptible to blowing away. If the bubbles begin to increase, you have found the place to descend! Mark it with a marker and begin restoration.

To eliminate cracks, special repair kits are used. The repair area must first be degreased and dried. The flocked material must be sanded with fine sandpaper so that the patch fits well. Detailed instructions for the kit will tell you about the details of its use.

We suggest you read: How to clean a fabric office chair at home?

Please note that after sealing, it is not recommended to inflate the product for at least 4-5 hours. The best option is to press the repaired area with a hard object immediately after repair.

We will be happy to answer any questions you may have when choosing a product! With love, your assistants from the Intex online store.

We also advise you to read:

Instructions for using the repair kit

Getting ready for the summer season: preparing the site for the pool

Choosing an inflatable bed (difference between beds and mattresses, differences in internal ceilings, built-in pumps).

Method No. 3: visual and manual inspection

Another simple way to tell you how to find a hole in an air mattress:

1. Fill the product as much as possible with air.
2. Carefully inspect the mattress on all sides for damage. Particular attention to the seams.
3. Wet your hand a little in water and, section by section, move your palm over the surface of the mattress. Move as slowly as possible - a quick inspection will not yield results. In the place where the air will come out, you will feel a slight chill or even a slight whiff on your wet hand.
4. Another technique is to also, examining area by area, press on the surface of the mattress, leaning your ear close to it. Carry out the procedure in complete silence - only then will you hear a barely audible whistle from the hole in the product. More attention - again to the seams.
5. Also mark any leaky areas with a permanent marker or tape. Don't stop if you find one hole - examine the entire mattress, there may be several damages.

Method #4: Water Immersion

This method, which tells you how to find a hole in an air mattress, is not suitable for all products - some of them cannot be completely immersed in water. Be sure to read the manufacturer's instructions. If such contact is allowed, then follow the instructions:

1. Partially inflate the mattress with air and close the valve.
2. Fill your bathtub or swimming pool with water.
3. Place the entire product under water.
4. First of all, press the material around the valve - if water bubbles begin to come out of it, then the problem has been found.
5. Thus, pressing both palms on the surface, examine the entire mattress submerged under water. Air bubbles will indicate the presence of a hole.
6. A non-hydrophobic permanent marker will again help mark the location of the damage.
7. Be sure to completely dry the product before further storage or repair.

Big package

Quite an original, but working option for inflating a mattress. It is best to use a durable (and necessarily undamaged) plastic bag. This procedure can only be carried out with the participation of two people. To do this you need to do the following:

1. Open the valve on the mattress.
2. Fill the bag with air and quickly close it.
3. We adjust the bag to the valve and firmly fix it on the “neck”.
4. Air pumped from the bag into the mattress.

The action should be continued until the desired result is achieved.