There are a considerable number of alternatives to a regular bed, among which air-inflated mobile options are particularly popular. The only difficulty that users encounter in practice is finding the right option for how to deflate an air mattress. The actual difficulty lies not in removing the bulk of the air, but in completely eliminating it from the cylinders.
You can pump it up using a manual or electric pump, and it takes a small amount of time and effort. There are also individual characteristics here, but it is not easy to notice them when performing a task.
Peculiarities
An inflatable mattress is a comfortable, mobile version of a bed for sleeping and relaxing. A complete alternative to a bed. An excellent flotation device for swimming in the river or sea.
In the field of medicine, an inflatable anti-decubitus mattress is used for bedridden patients, which helps a person spend time in a horizontal position and prevents the formation of ulcers and wounds on the skin.
A self-inflating mattress is indispensable on a camping trip or a trip to nature.
Each inflatable item is supplied with brief instructions for use and storage. Proper use of the item extends its service life. Peculiarities:
- release air only in acceptable ways that cannot damage the item;
- carefully inspect the item in an inflated state. This makes it easier to detect cuts, tears, and dents on its surface;
- Use safe chemicals for cleaning. A solution of warm water and laundry soap is best. Do not use cleaning agents with aggressive compositions or alcohol solutions to avoid damage to the surface of the inflatable item;
- then dry the product naturally;
- After opening the valve, air will flow out of the object evenly, do not speed up the process by applying intense pressure with your hands. Intermittent, non-rhythmic jerks can damage the item;
- fold the mattress correctly, straighten folds and creases. Keep the item in the container or packaging intended for it;
- keep it clean. After each use, carefully remove dirt and foreign objects;
- Protect from sharp claws of pets. If you use the mattress as a bed, cover it with a blanket, a blanket, and keep it in a cover;
- fill the item with oxygen by 80-85%. Do not jump on the surface, avoid sudden movements. This will help protect the valve (plug) from damage.
Can an Intex air bed deflate?
In the process of using air beds, their owners may encounter situations when the product begins to gradually lose its volume and release air, or, in simple terms, deflate.
As a result, a person who uses such a product begins to experience some discomfort while sleeping. And he has to fill the bed with air again from time to time in order to give it the necessary rigidity and elasticity.
Naturally, the owners of such products are interested in whether it is normal for an air bed to deflate and what should be done in this case. To answer this question, it should be noted that it depends on how often you have to re-inflate it.
For example, if a bed begins to lose volume a few weeks after you start using it, then this is considered normal.
The fact is that the air inside the product can gradually escape through microscopic holes in the polyvinyl base of the product. As a result, the bed becomes less comfortable to use and loses its rigidity.
Therefore, it is important to periodically pump it up as it is used.
. The most convenient way to do this is with the help of a proprietary manual application from Intex.
In addition, it is very good if your bed is already equipped with an automatic electric pump, because you will not need to take any action.
Basic deflation methods
There are several basic options for deflation. It is convenient and safe to bleed air using a mechanical foot pump, hand pump, household vacuum cleaner, electric built-in pump, manually, naturally.
Attention! Inflate or deflate an inflatable product? The correct word to use is "blow away". In the orthography of the Russian language, there is no prefix in the form of the letter “z”.
Original foot pump
Release air using a mechanical foot pump freely and quickly. You just need to use physical force. Algorithm of actions:
- open the valve, insert the pump hose or adapter into it, connect tightly;
- secure the connection with adhesive material (adhesive tape, electrical tape);
- press the pump chamber with less force than when inflating. In this case, reverse thrust is formed;
- air masses will be drawn into the apparatus and exit through the pump.
How to deflate an air mattress with a pump
Bleeding air from an inflated specimen using a pump is the easiest and most reliable way to help avoid mistakes. Most models bestway, pavillo, Intech are equipped with built-in electric and mechanical pumps with the necessary automatic deflation option.
A mechanical pump complete with an adapter also speeds up the process.
Before venting the air, inspect the item from all sides for damage and dirt. Wipe the surface with a damp sponge soaked in soapy water or another detergent. Algorithm of actions:
- open the valve. Under the influence of pressure, the air masses will come out on their own;
- connect the pump to the valve. Seal other additional openings (if any) tightly;
- start the pump. Electric or manual draft will release the remaining oxygen to the outside;
- disconnect the pump, close the valve.
Carefully fold and pack the item in a container until next use.
Home vacuum cleaner
This household appliance is designed to suck dust, dirt, and small debris inside itself. Equipped with a built-in motor, it can easily replace the pump. Suitable for freeing an inflatable item from excess air masses.
A home vacuum cleaner is equipped with a long hose, a device for pumping air inside, and a blowout hole for releasing it outside. Connect the vacuum cleaner hose to the open hole of the rubber thing, secure it tightly together. Turn on the vacuum cleaner at low speed and slowly pump up the air.
Slow bleeding will protect the structure and mattress material from damage.
Manually
A reliable, but more labor-intensive way to release air masses can be done manually. You will have to spend some time and your own physical strength on the etching process. Algorithm of actions:
- open the valve, leave it open, wait until the air comes out naturally;
- if the design of the plug is double, lightly squeeze it, the jumper will bend and free the exit for lowering;
- Squeeze out the remaining air with your hands, gradually smoothing the surface of the object.
Roll up the product and place it in a packing bag or bag for further storage.
Deflating an air mattress naturally
The inflatable product can be deflated naturally, without the use of additional physical force. The action will take some time. Models with a valve simply open, the air masses will gradually come out. Squeeze out any remaining oxygen by rolling the item into a roll.
Attention! Roll the item into a roll without additional pressure on the seams or partitions. Straighten the material into an even strip and repeat the procedure several times.
How to deflate a boat
Inflatable boats, dinghies, and mattresses are classified as swimming equipment. After using them on water, the air must be completely purged from them.
A rubber boat is heavier and larger in size than a rubber mattress. But it's easier to blow it away. Small boats, rowing boats, motor boats, PVC boats have several built-in compartments isolated from each other, which involves the alternate removal of oxygen from each compartment. The best option in this case is a vacuum pump.
You can deflate the boat using any external mechanical or electric pump. Procedure:
- place the item on a flat surface;
- inspect for external damage;
- clean from dirt, silt, mud;
- open the valves that each compartment is equipped with, one by one, clear the holes from the internal plugs;
- connect the pump, start it up;
- begin to bleed air from the ends of the craft, gradually moving to the location of each valve;
- Empty each compartment one at a time.
Squeeze out any remaining air with your hands. Proper care of your inflatable will help you avoid many problems and extend its lifespan. The main enemies are moisture, sand, algae, dirt. Take care and inspect the boat during the entire period of use. Fold, roll the product not tightly, all parts should be in a free state.
PVC boats can be stored in a fully or partially deflated state.
Free boats and small boats completely from air masses and store them folded or rolled up. Some specimens can be hung on mounts and kept hanging.
Keep in a warm room, away from hot radiators and heating devices. Hot air dries the rubber material, causing it to begin to crack and crumble.
Place oils, alcohol-based substances, and gasoline in a safe place to avoid damaging the boat. Don't let animals get close, they can bite or pierce the object.
Preparation for storage
Before deflating a mattress, it needs to be prepared for storage. To do this, use a simple soap solution. You cannot use “aggressive” household chemicals. This may damage the material. After cleaning, the product is left to dry until it dries itself. Only after complete drying is it deflated and stored deflated.
Important! Drying should be natural, without the use of hair dryers and other heating devices.
Advantages of a mattress with a valve
Air mattresses with a valve are easy to use. The presence of a valve allows you to quickly inflate and deflate the product. Rubber products are equipped with conventional or more complex valves.
A valve with an internal bridge prevents the gradual release of oxygen during operation.
The screw-on threaded valve tightly closes the hole and reliably maintains the elasticity of the object. A regular cork is less reliable in use and has a limited service life.
Seam damage repair
Experts will help you solve the difficult question of how to seal an air mattress along the seam.
Home repairs may not work out, so if there is a workshop nearby, it is better to take the mattress to a specialist. Damage along the seam is repaired from the inside of the mattress.
To do this, the torn section of the seam is squeezed out through the valve, and then you can begin repairs, following the instructions:
- Wipe the rubber surface with alcohol to degrease.
- Leave for complete drying - during this time, cut out a suitable patch, which is also wiped with alcohol.
- Lubricate the sides to be joined with glue and attach them to each other.
- Press them tightly and leave to dry for 12 hours.
Once the glue dries, turn the mattress out and inflate with air.
This is necessary to check the quality of self-repair.
Basic types of valves for inflation and deflation
Each inflatable specimen is equipped with one or more valves for air intake and release. Valve mechanisms are:
- plug-plug, the most ordinary simple valve. Tightly closes the open hole for pumping and deflating air. Made of plastic, suitable for small-sized inflatable products with low internal air pressure. Found in swim mattresses and small inflatable products;
- threaded plug. It screws tightly into the hole along the thread, is convenient to use, and prevents sudden opening of the valve as a result of an unforeseen situation. Promotes rapid deflation of air;
- valve-button with a bridging element. Prevents involuntary descent of air masses. To release air, open the valve, lightly press on it, the bridging element will bend and free the hole for the free exit of air flow;
- double acting valve with built-in adapter. Blocks air deflation inside and outside. Consists of a screw-on housing, a lid, and an adapter. Prevents foreign objects and debris from getting inside. Used in inflatables of famous brands intex, besway;
- electric pump with air deflation function. Activate the option, the air masses will come out on their own;
- valve built inside. It has a more complex design. Please read the instructions in detail before use.
Attention! Check the tightness of the valve as follows: inflate the product, wet the plug with an aqueous solution of laundry soap. A leaky hole will start blowing soap bubbles!
Valve opening
For simple valve models, simply open and wait a while until the air comes out on its own.
Do not use physical force in the form of pressing or squeezing the material. This will avoid damage. A valve with a more complex device, such as an internal flap or a bridging element, requires additional intervention.
Opening the damper
Built-in bypass element, the damper must be opened by squeezing the valve from the sides. This special mechanism reliably protects the air elasticity of the item. When squeezed, the damper moves to the side, freeing up the hole for unhindered air to escape out.
Models of these brands are equipped with valves of a similar design.
Unscrewing the valve
For conventional valve models, simply unscrew along the thread. First, make sure there are no built-in mechanisms.
With pump
An electric pump built into the mattress releases air masses quickly, evenly, without jerking. To do this, close the injection hole with a lid. Eliminates damage to the internal structure and external material of the product.
The external mechanical foot pump is convenient to use. To bleed air, lightly press the device chamber with your foot.
Mistakes when deflating a mattress
If you are releasing air from a rubber product for the first time, carefully read the instructions for use. This information will help you avoid common mistakes, preserve the integrity of the item, and extend its service life. Note:
- to the surface. It must be level, without bumps or irregularities, to avoid damage;
- Keep sharp, piercing and cutting objects away. Otherwise, the item may be accidentally pierced or cut;
- objects with heating, injection of hot air. Sources of high temperature change the rubber surface of the object towards distortion. The rubber becomes loose, lumpy, and wears out quickly;
- cold negatively affects the rubber surface of the product. You need to pump and deflate air from the mattress at a comfortable room temperature;
- use low pressure pumps. Such units bleed air with the highest quality and safest quality;
- Do not bleed air with powerful compressors and units. Strictly avoid using a car compressor.
After deflating, carefully inspect the item for possible damage and adhering foreign elements (plant particles, lumps of dirt, small pebbles). This will help avoid damage to the product during storage.
