✅ How to make a mop with your own hands from wood

Share on social media networks:

Washing floors on all fours with a rag is not very comfortable or convenient. Especially if you remember that this is, after all, the twenty-first century. Of course, we are not talking about an automated scrubber dryer, but we should not neglect such an effective technical tool as a mop. The mop helps to clean the floor quickly enough without applying much effort. In the article we will talk about how to make a mop with your own hands so that it is simple and at the same time effective to use.

How to make a wooden mop

So, you're about to do some deep cleaning in your apartment, but you find that you don't have anything for it, not even a mop. Don't rush to go to the store to get it. In this master class we told you how to make it yourself. By the way, it will take you a couple of minutes to do everything about everything, besides, to implement the task you will need all the simplest things, but let’s talk about everything in order. And if anything happens, you can wash windows without the risk of falling out of the window. How? Everything is simpler here. You can use a little helper for this. We mean robot. Yes, you heard right. You can buy a window cleaning robot on the website https://thehobot.ru. Let us note that Hobot robots, namely the ones we are talking about, are distinguished by their high efficiency, ease of control and, importantly, they are very durable, at a relatively low cost.

What materials are needed to make a mop?

Of course, this tutorial is about making a wooden mop.
To create mops you will need the following:

• cutting from a garden tool; • a lath or board 25 mm thick and approximately 3-4 cm wide; • sandpaper; • pencil; • roulette; • drill; • drill; • nails; • hammer.

To connect the parts, and there will be two of them, you can use not only nails. You can also use a wooden dowel and much more, including glue. Decide for yourself what to do.

How to make a wooden mop with your own hands

In the image above you can see our recommended sizes. The length of the seam should be approximately 1200 mm, the thickness of the handle should be 20 mm, and the length of the working part should be about 25 cm. Let us note again that in this case we are talking about approximate dimensions.

So, first you need to start creating the working part. In the board, the thickness of which must be at least 25 mm, you need to drill a hole for the handle. If the thickness or otherwise the diameter of the handle is 20 mm, then the diameter of the hole should be the same. To drill such a hole you will need a petal drill. Of course, markings first.

Having arranged the hole, grind the working part using sandpaper, of course, if necessary. Then start assembling. If the cutting is longer than the value we indicated earlier, you need to trim it. When it comes to connecting parts, everything is as simple as shelling pears. You need to insert the cutting into the hole, and then drive a couple of nails into it.

How to make a mop with your own hands?

Folding bucket with two compartments

First, by searching for “Cinderella cleaning kit” (as it was written on my mother’s box), I found this device. After reading user reviews on the Internet, I decided that due to its folding design, it is still not very convenient to use. For example, how to move it from place to place when the bucket is filled with water? Fold and unfold every time? You can learn more about this set from the promotional video - perhaps I just couldn’t appreciate this model, but you will really like it:

Wooden mop for cleaning floors

The simplest device for cleaning floors is an ordinary wooden stick with a crossbar. Making a mop with your own hands from wood is quite simple:

You need to take 2 wooden slats. Their length will vary depending on your height. The handle can have a size from 80 to 135 cm, try it on to make it comfortable for you. The standard working surface is about 30-40 cm long.
Sand the surface thoroughly so that there is no risk of getting a splinter when cleaning the house.
Fasten both parts with screws or nails.

However, it has a number of disadvantages. It is no coincidence that she received the name “lazy woman”. It can only be used to wash the floor in the middle of the room, and in the corners, in narrow passages, near the baseboards, the “lazy one”, alas, is useless. Industrial products equipped with a metal crossbar and a rag clip are no better. In addition, the crossbar in such products often scratches the floor.

Build process

Place the pieces together with right sides facing inward. Make a seam, retreating 1 cm from the edge. Do not forget to leave an unstitched area (10-15 cm), through which you can turn the product inside out.

Once you have finished sewing the pieces together, tie the knots. Trim off any excess threads. Carefully turn the product inside out and sew up the open area. Place the cover on the mop, overlapping the edges to see where the Velcro should be located. I pinned them in place and then machine stitched them.

And you have a ready-made mop case!

Rope mop

In appearance it resembles a giant paint brush. It easily penetrates into hard-to-reach corners that are difficult to reach with your hand. Such products are on sale, and many have appreciated their convenience. This is much more convenient than making a mop from wood yourself.

You can try to make a rope product yourself. The task is to secure a bundle of lengths of cotton rope to a stick.

Option 1

To bring such an idea to life, you can proceed as follows:

If you have metal working skills, it is enough to complete three simple parts for the tip of the product:
Clip.
Clamp clamp.
Now cut the cotton rope into pieces of 40-60 cm. The bundle should be quite thick (the more rope pieces, the better).
Place a bundle of rope on the disk and press it with a metal bracket.
An even more high-quality and durable product will be obtained if you replace the rope part with old cotton knitwear, cut into strips in a spiral.

Important! This product will last for quite a long time. Caring for such a mop is quite simple: after each use, the ropes are washed in a soapy solution.

Option 2

There is an even easier way to make a mop with your own hands. You won't need any metal work, so almost anyone can handle this task.

Round wooden stick.
Screws or nails are 20mm longer than the diameter of the stick.
Thick cotton rope or knitted strips.
Twine or wire.
A pair of old children's socks.

The work order is as follows:

Stepping back 4-5 cm from the end of the stick, drive two nails crosswise at a distance of 1.0-1.5 cm from each other. The heads of the screws or nails should protrude outward. They are necessary so that the rope bundle does not slip off the stick.

Important! To prevent the wood from cracking, dull the nails or screws slightly by tapping the point with a hammer. A sharpened nail delaminates the wood, causing a crack to form. A nail or screw with a dull end will paint the wood without cracking.

Pull the sock over the nails and wrap the rags around the end of the stick so that the nails cannot be felt.
Place another sock on top and tie tightly.
Cut the rope into 40-50 cm pieces and lay it out in an even layer on the floor.
Place the prepared stick on top of the ropes so that the toe bandage is in the middle of the rope pieces.
Tie the lengths of rope around the stick using a piece of twine or wire.
Before finally tightening the knot, distribute the rope pieces evenly.
By placing the stick vertically, you will see that a large brush has formed at the end. Trim the ends of the rope evenly.
Fold the elastic band of the first sock down, placing it over the head of the brush.
Tie the product with twine over the edge of the sock elastic.

The mop is ready to go!

A rope product will help keep your floors clean.

Important! A good alternative to a rag is a DIY mop head made from microfiber or crocheted from leftover yarn. The microfiber product allows for both wet and dry cleaning. When cleaning without using water or detergents, dust is removed due to the electrostatic effect.

Nozzles

When you visit the hardware department of a supermarket, your eyes will widen. Here are mops for the home of various models and with a variety of attachments. For example, rope or microfiber, in the form of a sponge with a squeeze, while others are squeezed only by hand.

Wooden

Many housewives tried to use another mop, for example, with a sponge. But when it broke, we returned to the classic “grandmother’s” wooden one. It's cheap. You can use it for years. The housewife uses unnecessary cotton items for rags. With such a mop you can wash parquet and tiles, and even with any detergent, from powder to substances containing bleach.

Here the quality depends on whether the rag is suitable for cleaning the house or not. The best ones come from old bath towels or your husband's T-shirts. If you want to properly care for your laminate flooring in your living room, go to the hardware store at the supermarket and buy a microfiber cloth. It does not leave excess moisture on the surface of the laminate, which harms it, even if you wash it with powder. There will be no divorces.

Classic wooden mop

What are the disadvantages of this type of home tool? The fact is that it is not as maneuverable as modern types of mops. It can be difficult to clean under a closet or low sofa or bedside table. The rag can only be wrung out by hand, which many housewives have become tired of after years of wet cleaning. Because. Many people prefer rags with a spin cycle.

With sponge

In the supermarket you will immediately notice it, it is blue. Sold immediately with the roller installed. Over time, it can be replaced with another. There are soft and harder sponges. The sponge easily absorbs water. You quickly wring it out and rinse it under running water.

If you have a cat or dog in your apartment, this sponge is just for you. During shedding, she will easily collect animal hair. But it will leave soapy stains on the floor. In addition, such a mop cannot be inserted into a hard-to-reach place in the room.

Those who have used it say that the water in the sponge is not fully wrung out and it needs to be rinsed with plenty of running water. Before using, you need to soak it for 20 minutes and it will become soft. Those who claim that you need to leave it, for example, in water overnight, are mistaken. Especially in hot weather, there are a lot of germs and cleaning the floors will be questionable.

How to make a wooden mop

How to make a wooden mop with your own hands

Washing the floor with a mop is not only more convenient than crawling with a rag, but it is also much healthier - your back does not get tired or hurt. Of course, in the 21st century, many people resort to using electronic scrubbing devices, but a regular mop is no worse, and sometimes even more effective. Thanks to such a simple tool, you can make cleaning better and less labor-intensive. The most primitive mop can be made with your own hands without any problems, but how to make a mop is worth considering in more detail.

The market is flooded with cleaning tools. The following types of mops are popular now:

rag;
with sponge attachment;
butterflies;
with microfiber;
rope;
flat;
steam.

It is important to know! At home, the easiest way is to make a rag wooden mop or a rope mop.

Cutting

You must cut out two pieces in the shape of the letter H - one from cotton, the other from a terry towel. Try to work carefully so that the parts match completely.

A broken nail is no problem: tips for treating nails at home

Only on a soft spot: Russian Domostroy forbade punishing children in any other way

From athletes to Hollywood stars: men Naomi Campbell

How to make a wooden mop

Wooden mops are very simple in their design (they consist of two parts) and functionality. Place a rag on the base and you can get to work. This mop is used mainly for tiles or linoleum. Despite the fact that its cost is quite low, sometimes it is simply more convenient if you make a mop yourself.

You will need to prepare the following tools in advance:

a handle (handle) from any unnecessary garden tools;
a board 4 cm wide, 2–3 cm thick and about 30–40 cm long;
sandpaper;
pencil or chalk for drawing;
roulette;
drill with drill bit;
nails;
hammer.

If you rely on the standard dimensions of wooden mops, then the handle size is 1.2 m, and the working base is 25 cm. Of course, if you make it yourself, the dimensions can vary based on your own preferences (it may be more comfortable with a longer base or due to your height with a larger handle).

When everything is prepared, you can get down to business. First of all, you will need to deal with the part on which the rag will be hung. Mark the center and, using a drill with a petal drill, drill a hole into which the handle will fit (accordingly, the diameter of the handle is equal to the diameter of the hole). Next, you need to take sandpaper and carefully sand the entire base.

Attention! The cutting most often does not require any work. But it may happen that its original length is longer than necessary, in which case it will need to be sawed off.

Once both parts are prepared, you can begin assembling the mop. The handle is inserted into the hole and then several nails are driven in at the joint to hold the structure in place. The mop is ready for use.

How to make a rope mop

Externally, a rope mop looks like a huge brush. The advantage of such a tool is the ability to reach all hard-to-reach places. Now this type is one of the most popular and in demand. Their price in stores is an order of magnitude higher than that of wooden ones. That’s why it makes sense to get confused and try to implement one yourself using improvised means. The design is not complicated enough - you will need to attach a bunch of ropes to the handle. The ropes themselves are made of cotton material.

There are two ways to make such a mop.

First

This option is more complex and requires certain skills in working with metal. Three parts need to be made:

disc with slots;
clip;
clamping bracket.

Next, you will need to take a cotton rope (or any other cotton knitwear) and cut it into strips 40 to 60 cm long. The more ropes you get, the better; the mop should be as thick as possible. Then a disk is useful on which this bundle is put and pressed with a metal bracket. This cleaning base is attached to a wooden handle.

Oval bucket with two compartments

All these kits differ from each other in the presence or absence of an automatic rinsing . For example, my mother’s kit does not have this function, and in order to rinse the mop, you need to lower it into the free part of the bucket and swirl it thoroughly in the water. But some models with a manual rotation mechanism are additionally equipped with an automatic rinsing function. It is implemented in the form of a special stand at the bottom of the bucket, on which the mop is placed and quickly washed by lightly pressing the handle, causing it to rapidly rotate in the water.

Source

DIY mop attachment - 5 tips and ideas

Share on social media networks:

How to make a wooden mop

What materials are needed to make a mop?

Tags

How to make a wooden mop with your own hands

How to make a mop with your own hands?

Folding bucket with two compartments

Wooden mop for cleaning floors

Build process

Rope mop

Option 1

Option 2

Nozzles

Wooden

With sponge

How to make a wooden mop

How to make a wooden mop with your own hands

Cutting

How to make a wooden mop

How to make a rope mop

First

Oval bucket with two compartments