Double-sided tape is a tape consisting of a main part (foam or polypropylene) and an acrylic adhesive, which is applied to both sides of the base. In some cases, the base can be foil or metallized, which increases its strength. After using such fastening material, situations arise when it must be removed without damage.
When removing such a fixing material, you need to take into account the fact that this item is attached very tightly, and this makes it very difficult to remove it completely, and impossible without the use of additional means.
The methods associated with removing this type of tape directly depend on the type of plane on which it was fixed.
Removing double-sided tape using heat
Heating works well to separate the bulk of the adhesive, however, it is recommended to use this method only if the surface under the adhesive is heat-resistant. Otherwise, instead of the cleaned area, you may end up with serious damage to the object.
For the heating procedure, a regular hair dryer, which is used for styling hair, is quite suitable. First, heating and subsequent softening of the adhesive mass occurs. After which, the remaining dirt can be easily removed with a cotton cloth; to do this, you need to rub the desired area without force.
Useful recommendations for consumers!
For all necessary work, purchase specialized types of adhesive tapes from high-quality manufacturers who make products for further removal of material without the slightest problem - in this case, quality is guaranteed.
Today, well-known products have deservedly gained popularity in our market. It produces very high-quality different types of single-sided and double-sided adhesive tapes that will not leave traces of adhesive and will not spoil the appearance of expensive furniture, walls, plastic, mirror or glass coverings.
An adhesive substance made according to a secret recipe allows the consumer to peel off the tape even after a long period of time when it has been pasted. Such material can be easily removed without leaving traces of the applied adhesive from different coatings.
Removing traces with vegetable oil
Vegetable oil can easily destroy any remaining adhesive that was not removed with the main part. The method of using vegetable oil depends on the location of the area where the glue remains. If the surface was horizontal, then the oil just needs to be poured onto the required area, but if the material was pasted on a vertical plane, then a napkin previously soaked in oil should be applied to this area. The oil needs time to interact with the adhesive (approximately 15-20 minutes). After time, the remaining glue can be easily removed with a napkin. In order to remove oil stains, the contaminated area should be washed with a soapy solution, then rinsed thoroughly with clean water.
How to get rid of tape marks on different surfaces
It is recommended to use oily liquid only on objects that do not absorb liquid substances.
Features of cleaning marks depending on the type of surface
Before you begin to deal with tape residues, you should consider which method will be not only more effective, but also the safest and most gentle. It can be different for each type of surface.
Glass, mirror
Any removal method will do, except using abrasives or metal brushes , since it is not difficult to scratch the glass surface:
The heating is allowed to be low, so a hair dryer will not work here. Otherwise, the glass product will simply crack.- You can use oil, alcohol, solvents or glass cleaners.
- Baking soda, which is a weak abrasive, and a school eraser will not leave visible marks on the glass or mirror.
- Paper tape can be soaked in hot water in advance to remove the top paper layer.
You can learn more about ways to remove tape residue from glass here.
Plastic
It is even easier to damage than glass, so no brushes or scrapers . Products made from polymers should also not be heated - some types of plastic may lose their shape and warp at elevated temperatures.
Alcohol, gasoline, and kerosene will not do him much harm. Acetone can dissolve plastic, so you should stop using it.
Find out more about removing tape marks from plastic surfaces here.
Tree
When transporting furniture, adhesive tape is used quite often. After all, it is so convenient to fix doors that are trying to open. But then the torment comes. It seems that the tape is firmly stuck to the smooth surface.
How to remove from a wooden surface:
Both polished and unvarnished wood is quite capricious.
The heating method will not work here. The varnish will crack when exposed to high temperatures. In this case, there is no need to use active chemical reagents and solvents.- The ideal method for cleaning varnished surfaces from adhesive residues is vegetable or essential oil, alcohol or glass cleaner. They will not leave any marks on the surface.
- It is prohibited to use vegetable oil only on unvarnished wood - the fat will be easily absorbed into it.
- You can rub the contaminated area with purified gasoline. It is not capable of dissolving varnish and paint.
- A rubber eraser can easily handle small areas. A dry cloth will help to completely remove any remaining tape.
Read more about how to clean tape and its residues from furniture in this article.
Laminate
Even a coating with a high wear resistance class can be damaged by an overly sharp blade. Scratching a regular laminated panel with a knife is even easier. Therefore, no knives .
Treating the surface with a solvent to avoid removing the polymer coating is also prohibited.
The ideal option for laminate is vegetable oil. You need to spread a napkin soaked in it on the floor for literally 30 minutes, and then wipe off the remaining tape with a dry cloth. The final stage is removing the grease stain.
Since laminate does not tolerate large amounts of water, this is done with a slightly damp cloth,
Painted or wallpapered walls
Removing tape from such a surface is most problematic. It will be removed along with paper, acrylic or water-based emulsion. It is especially difficult to remove it from non-uniform, uneven surfaces.
First, the glue is softened with an iron: it should be warm, but not hot . Iron the problem area through gauze or a thin napkin. The softened tape will come off easily.
Chemical liquids as a way to destroy glue residues
The best liquids to remove the effects of gluing fixing material are gasoline and paint thinners. The liquid must be applied to a napkin, then the glue stain must be treated. When exposed to chemicals, the glue dissolves and the stain is removed without problems. However, it is important to remember that this method cannot be used to process surfaces that could be seriously damaged when exposed to reagents. Another disadvantage is the strong chemical smell. It will be present in the room for a long time; it is impossible to completely wash it at one time.
“Mom, I crumbled a little here”: how to clean the keyboard from small dirt
Another liquid that can help remove tape marks is nail polish remover. The condition for its use is the complete absence of acetone in the composition.
Paraffin-based lighter fluid can also help remove contaminants, but it only works on certain types of glue.
Tile
Removing adhesive from tiles is very simple: take a smooth surface cleaner and follow the standard instructions. Windshield wipers, vinegar, eraser, and melamine sponge are suitable. The tiles can be gently wiped with soda slurry: the powder has cleaning properties and is a mild abrasive.
Double-sided tape marks can become a big problem if they are not addressed immediately. Choose the appropriate method and act immediately: let all household items remain perfectly clean.
Removing tape using table vinegar
Ordinary table vinegar can easily remove double-sided tape. A good result is achieved due to the fact that vinegar, which is an aggressive agent. When applied to the desired area, it softens both the adhesive layer and the base itself. After treatment with table vinegar has been carried out, the area should be wiped with a dry cloth to completely remove any remaining contaminant. Using vinegar, it is good to carry out the removal process from materials such as glass, tiles, metal, plastic, as well as mirrors and ceramics. And the smell of vinegar, despite its harshness, dissipates quite quickly, since vinegar vapor is a volatile substance.
A few more tips
A number of simple recommendations will help you clean surfaces from double-sided tape without harming them:
- To remove adhesive tape from paper, it is better to use a hairdryer, and from fabric - medical alcohol;
- To avoid harming plastic surfaces when cleaning them from adhesive tape, using vegetable oil or alcohol for these purposes will help;
- You can clean any hard surface from adhesive tape using masking tape, which is pressed against the adhesive tape and then removed from the surface along with it.
Removing traces of tape using baking soda
To use baking soda for this purpose, you should first prepare a paste of baking soda and hot water. The resulting mass is carefully applied to the desired area, after which the marks are easily and quickly removed with a sponge. The final stage of cleaning is to rinse off the cleaning composition with clean water. Baking soda is widely used for cleaning on materials such as plastic and tiles. It is important during the cleaning procedure with soda not to rub too hard to avoid minor scratches and other damage.
Children painted the walls with wax crayons: a life hack on how to clean wallpaper with a hairdryer
Universal methods
- You can use a knife to remove the adhesive tape from each surface. However, you need to act extremely carefully so as not to scratch the product. Using a blade, carefully pry the tape and pull;
- Masking tape is a versatile cleaning method. Place the tape on top of the tape and quickly tear it off. The tape will also come off along with the tape. Among other things, you can use classic tape, which is also attached over the old tape and peeled off together;
- Place a rubber disk attachment on a drill or screwdriver and carefully remove the tape at low speeds;
- White spirit, kerosene, acetone, gasoline or thinner can effectively wash away both the adhesive tape and the sticky residue left behind. Soak a cloth in the mixture and wipe the desired area, then wipe off the tape. This is a good option for removing tape from plastic;
- Take a construction or home hair dryer and thoroughly heat the required surface around the edges. Then carefully pry the adhesive tape with a plastic spatula or scraper and remove. To quickly remove remaining adhesive, heat the surface again, apply acrylic adhesive solvent, and wash the area with a sponge. This method is not suitable for glass!
Ethyl or ammonia
It is recommended to apply ethyl alcohol to a cotton-gauze swab or cotton pad. Then you need to scrub the area until all the dirt is gone. An important condition in this case is the timely replacement of dirty swabs with clean ones, since the speed of the cleaning process depends on this. Ethyl alcohol affects the adhesive tape base at the molecular level, destroying its structure.
In addition to ethyl alcohol, you can also use ammonia. It acts similarly to ethyl alcohol. The difference is a sharp, unique smell that dissipates fairly quickly.
According to experts, fresh marks left after removing double-sided tape are easier to remove than old stains. The older the stain, the more it is absorbed into the underlying material, and accordingly, the more difficult it will be to remove it without leaving a residue. In addition, adhering dust and other small particles significantly complicate the cleaning process and restoring the original condition of the affected area. For old marks, heating procedures are well suited if the characteristics of the material on which the tape was fixed allow this.
How to clean household appliances from tape
When we buy a refrigerator, microwave oven or vacuum cleaner, we receive a lot of stickers on the surface as a “bonus”. How can I remove the adhesive tape from these items? To remove them, use the following compounds:
- ethanol;
- window cleaners;
- nail polish remover;
- acetone;
- vinegar.
As you can see, the listed substances are aggressive. For this reason, it is necessary to first test them on an inconspicuous area of the coating, and then begin to remove the tape.
Types and scope of application
Today on the world market there are universal brands designed for different types of work. The only difference between the adhesive tapes is the base.
Foam based
- Scope of application: construction and repair work.
- Use: fixing parts and products of complex shapes, with holes and uneven bases.
- Characteristics: canvas thickness from 0.5 mm, foam texture due to its compressibility provides reliable and high-quality fixation even with rough edges.
Fabric based
- Scope of application: repair and finishing processes.
- Use: for installation of floor and wall materials, for example gluing linoleum and installing lightweight panels.
- Characteristics: made of cotton or synthetic textiles, lightweight and flexible in operation, excellent contact with any coating.
Polypropylene based
- Scope of application: advertising and signs, packaging products, printing.
- Usage: gluing paper, working with posters, photographs, gluing paintings, etc.
- Characteristics: weak, easy to tear, weak adhesion.
A high-strength installation building product is also available that can withstand heavy weight. This Velcro allows you to attach heavy mirrors, wall shelves, hangers and other rather large and massive accessories to the walls.
Professional products
These compositions are produced as aerosols, special pencils or liquids.
Universal products will help remove stubborn stains and dirt:
- Kiehl Tablefit is in good standing.
- Con.
- Taygeta S-405 is distinguished by its operational impact.
- For allergy sufferers, Super CMF-240 is suitable.
- Strengthened cleaning agents “Profoam 2000” and “Formula X-5”.
From all of the above, in order to know exactly how to peel double-sided tape from a surface, you should clearly know the material from which the surface of the product or structure is made. Accordingly, select one of the above removal methods.
Causes of pollution
- The mirror was glued with double-sided tape to some surface, for example, to a cabinet door. Subsequently, we separated the mirror from the cabinet, but traces of tape and glue remained.
- Perhaps you were doing renovations and sealed the mirror with paint glue so that the wall paint would not stain the mirror surface.
- Having bought a mirror in a store, they brought it to you sealed with packaging tape.
- There was a sticker on the mirror, its structure reminiscent of stationery or construction tape.
- Some smart guy stuck a note on his favorite mirror or attached a paper drawing as a keepsake with strong stationery tape.
