Why doesn't the washing machine spin out the clothes and drain the water?

When household appliances break down, it is always frustrating, especially when it comes to the washing machine. Most often, the situation is this: the machine has finished washing, and the owner is preparing to take out and hang up the slightly damp laundry, but in the end he finds things floating in soapy water.

To understand why the washing machine does not spin the clothes and does not drain the water, you should first figure out whether the equipment or improper operation is to blame. “Service Center 21st Century” has prepared a list of reasons why this malfunction occurs.

What should I check when my washing machine won't drain or spin?

The lack of water drainage does not always indicate a breakdown of some component or element of the system. In many cases, the washing machine does not spin or drain due to domestic reasons, which any owner can fix on their own:

1. The washing mode is incorrectly selected - if a program is set that does not include draining and spinning, the equipment will not perform this action.
2. The drain hose is kinked or crushed - water will not be able to flow out through the bend in the pipe.
3. The sewer hose is clogged - if you do not remove the garbage from the pockets before washing, the pipe will become clogged, water will not be able to flow out of the machine, you will first have to disassemble the structure and clean the pipes to remove the clog in the hose.
4. The spin cancel function is turned on - do not forget to turn off this button, otherwise the wash cycle will not be completed and you will have to turn on the washer again.
5. “0” is selected on the speed regulator - on all modern units it is possible to adjust the number of revolutions; at 0, the drum does not rotate, and accordingly, the machine will not squeeze out or drain the water.

Note! To identify the reason for stopping the process with visible water in the drum, it is often enough to look at the equipment display. On almost all devices, an error code is displayed on the screen, which will tell you where to look for a machine malfunction.

Incorrect use of programs

Most often, the spin function can be disabled due to inattention. The situation is as follows: a program was turned on, which included spinning, but when the laundry was completely washed, it turned out to be wet.

The reason for this may be that the spin was deactivated before the wash started.

Also, very often many people use programs designed, for example, for gentle washing of silk or woolen items. They do not provide for spinning clothes so that the clothes are not damaged.

To solve this problem, just carefully study the instructions for the washing machine. And next time, choose the right program or turn on the spin cycle.

Reasons why the washing machine stopped spinning and draining water

If the problem is not with an incorrect mode or a clogged sewer, there are no other visible reasons for the malfunction of the drain hose, you need to look deeper. It is necessary to unplug the machine, remove the laundry from the tank, drain the water through the drain filter (located on the bottom front side) and conduct a thorough inspection.

Often the washing machine stops spinning and draining water for a number of technical reasons:

• the drain filter is clogged with hair, threads, small objects - just unscrew the element and clean the drain filter under the tap;
• clogged pipe or hose - a clogged drain pipe or the hose itself connecting the washing machine to the sewer prevents water from being removed, you should disconnect the hose and clean it or the pipe with the filter;
• the drum is dirty - dirt in the drum prevents soapy water from coming out; soft sponges and cleaning agents without abrasives are used to clean the surface.

Healthy! Some problems with the operation of equipment, such as a clogged drain filter or pipe, can be corrected in the machine yourself by disconnecting the hose and clearing the filter of debris. But in case of serious damage, it is better to avoid repairing the washing machine on your own and call a specialist.

What you can do yourself

Some manipulations to restore the functionality of the drainage system can be done independently. Some of them will not require virtually any investment, while others cannot be implemented without purchasing additional parts.

Drain the water

The first step is to drain the water from the inside of the machine. Even if the system is clogged, it will not be superfluous to additionally start the draining process. You may have to wait a while because the items may not function as usual.

Open the hatch and take out the laundry

Now you can open the hatch and remove the laundry without the risk of large amounts of water leaking out. A malfunction of the spin and drain system will cause the laundry to remain wet. It needs to be squeezed out and hung to dry.

Clean the drum

The next step is to clean the drum from dirt. They can prevent the normal drainage of water. For cleaning, you can use various sponges, hoes and detergents. However, you should not apply aggressive mixtures to the inside of the drum, as they can compromise the integrity of the material and lead to even greater problems.

Check the drain filter

One of the main elements of the washing machine drainage system is the filter. It protects pipelines from mechanical contaminants that can clog the lines and prevent the normal passage of liquid. The drain filter is often located at the front of the unit behind a special plug. It is necessary to remove the component and carefully inspect for the presence of large contaminants. It is necessary to inspect the central part of the filter especially carefully, since this is where rubber residues from the seals can accumulate. If necessary, the filter can be washed under running water.

Replace the pump

Replacing the pump seems to be a radical solution to the issue, which is taken only after achieving full confidence in its malfunction. The pump must be selected according to the appropriate parameters and preferably original. The use of third-party pumps can lead to inconsistencies in output indicators and unstable operation of the entire system.

In some car models, access to the pump is quite easy by unscrewing the back cover. But sometimes replacement can only be carried out after complete disassembly of the device, which is best left to a specialist.

Clear a clogged hose or pipe

A clogged hose or pipe can be eliminated by simply flushing all components of the drain system. There are no special skills or tools required. The most important thing is to put all the gaskets in place when reassembling. Otherwise, immediately after connecting the device to the water supply, significant leaks will be observed.

The most common breakdowns

Failures that lead to machine malfunction can be divided into those that arise due to non-violations of operating conditions (power outages, surges in water pressure) and due to wear and tear.

Pump failure

Due to increased loads and load surges, the water pump fails. It will need to be replaced.

Failure of the control module or programmer

The control module is responsible for turning on and off all functions and washing modes of the machine; if it breaks down, the pump motor does not receive a signal about the need to drain.

Malfunction of the water level sensor (pressostat)

The level sensor transmits a signal to the control module about a high water level and gives the command to turn on the drain. If there is a breakdown, the signal is not transmitted and the washing cycle does not complete, the pressure switch needs to be replaced.

Failure of the tachometer, drive belt

This element controls the spin cycle; if it breaks down, the washing machine does not spin or drain the water, or it operates at high speeds with significant vibrations.

Wiring problems

All signals are transmitted to the control body via wires; if they are damaged, the signal does not reach.

Engine malfunctions

Problems lead to the inability to control the spinning, rinsing, and draining processes.

In such cases, it is necessary to call a repairman; only a specialist will be able to identify the problem that is hidden deeply, repair or replace faulty parts.

Repair features

Washing machines from different manufacturers have some specific features that appear during repairs. Taking these features into account will allow you to restore the equipment as quickly as possible and without any difficulties.

Indesit

Most Indesit washing machines for the Russian market are assembled in Russia. This is a budget equipment that can experience a variety of breakdowns from time to time. Most often, malfunctions are related to electronics, and in machines with front-loading laundry, the bearings wear out very quickly.

Zanussi

One of the most common problems for all Zanussi devices is drum jamming. This component is extremely sensitive to dirt and even the smallest mechanical inclusions. In addition, the design is clearly not designed to work with hard, salt-rich water. Filtration systems quickly fail, and heating elements often simply burn out during intensive use. Experts attribute frequent breakdowns of the heating element to the poor choice of material for the tubular part, which is typical for all product lines of the manufacturer. Repairs here are quite simple even without special skills.

Ardo

The weakest point of Ardo washing machines is considered to be electronics. Even with relatively gentle operation, key elements burn quite often. Moreover, repairs can be so expensive that it is more logical to just buy a new device. Fortunately, the cost of cars of this brand is low. It is worth noting that problems with electronics occur in all washing machines, but here they are most pronounced.

LG

Among all LG washing machines, the most popular are direct drive devices. In this case, the rotating drum is directly connected to the motor shaft without any belt drives. This allowed us to minimize wear of parts and significantly extend the service life of the unit.

Breakdown most often occurs in the drainage system, which has a specific design. Even with minimal contamination, the drain mechanism does not start, which leads to an error. Repair in this case comes down to complete cleaning of the entire drain system.

Also, owners of LG equipment may encounter a malfunction of the water intake sensor. Insufficient sealing of this unit leads to water ingress and subsequent freezing. Thus, the system cannot receive a signal to fill with water, which leads to the tank overflowing and the drain system turning on. As a result: constant self-draining with constant recruitment.

Samsung

Samsung branded machines boast reliability and durability. However, even here there is a possibility of failure of the heating elements. But this problem can almost always be solved by replacing the heating element yourself at home.

During operation, machines vibrate a lot, which can lead to loose connections and wear of some components. It is especially common to find a torn belt, which can be replaced at home. However, it is recommended to use only products for your car model.

The inconvenient location of the filter does not allow it to be cleaned frequently, which can lead to contamination of the drain system. The way out of this situation seems to be to dismantle the structure and thoroughly wash away all contaminants. You should also not neglect timely replacement of the filter, even if this procedure is difficult to carry out.

Eyelid

Most of the breakdowns in Veko washing machines are associated with contamination of the drain paths or problems with the electronic module. In the first case, it is enough to simply carry out a thorough cleaning. The second type of malfunction may require repair or complete replacement of the control unit. Replacement is most preferable if there is no desire to understand the intricacies of electronics or seek help from a specialist.

Sometimes there is also a breakdown of temperature sensors, resulting in the impossibility of heating water. This is where a repair specialist can best help.

Ariston

Ariston company produces reliable washing machines. Malfunctions most often arise due to specific operating modes. Too hard water, insufficient care and infrequent filter changes can lead to failure of the device.

Sometimes during operation they may begin to hum and vibrate. This problem is best identified and corrected at the very beginning. Otherwise, there is a high risk of aggravation, with further wear of key elements.

It is worth noting that most of the elements are represented by non-demountable structures, the breakdown of which cannot be eliminated without the help of specialists.

Wise use of the washing machine's capabilities will allow you to enjoy its performance for a long time. However, from time to time some problems may still arise, the presence of which will prevent you from washing things comfortably. Lack of drainage seems to be a fairly common problem, which can very often be solved independently at home.

Weaknesses of washing machines of popular brands

Taking into account the features of equipment of various brands, it will be easier to determine why the washing machine stopped draining and spinning.

Failure of the control board

If the previous steps failed to identify the fault, this may indicate a breakdown of the washing machine control unit. This can happen for a number of reasons:

• Voltage drop, lightning strike.
• The control module tracks are poorly soldered.
• Water getting on board.
• Incorrect actions of the device owner, etc.

You should absolutely not try to repair the control unit yourself. This is a very complex process, during which you can permanently damage your LG washing equipment. To diagnose the board and fix the problem, it is recommended to contact a professional.

Spin does not work

Having loaded things into the unit, housewives in most cases do not monitor the operation of the device, but rather go about their personal affairs. Once the process is complete, the user simply removes items from the drum and hangs them out to dry. It is at this moment that you can detect insufficient spin or its complete absence. How can you tell if the device has not squeezed out excess water?

According to two eloquent signs:

• Items removed from the drum will be very wet.
• There will be water left in the drum of the unit.

After making sure that the Indesit washing machine does not spin, you need to find out the cause of this malfunction.