How to choose a suitcase Repairing handles, wheels and legs

Suitcases, like any other things, have the unpleasant tendency to wear out, get damaged, and become unusable. Suitcases on wheels are most susceptible to damage, since their design includes many parts that can quickly break.

This is precisely the reason why suitcases on wheels require spare parts, which it is never a bad idea for every traveler to have with him so that he can quickly replace a part that has become unusable.

Types of components for suitcases

Breakdowns of suitcases on wheels happen quite often, even when purchasing products from well-known manufacturers. This is not affected by the design or model of the suitcase. If the zipper and clasp on the product are damaged, this is not a very big problem, but it can cause a lot of trouble on the road and make it so that the traveler will not be able to use the suitcase further.

To repair the product or replace individual parts or structures, the availability of appropriate spare parts is necessary. A rolling suitcase consists of the following main parts:

• Retractable structures.
• Wheels and wheel blocks.
• Handles.
• Legs and stands.
• Locks and cases.
• Runners.
• Lightning.

Suitcase wheel

Wheel block for suitcase

Telescope handle. d/suitcase

Suitcase handle with fasteners

Suitcase locks

Suitcase legs

Thanks to the wide range of accessories for travel bags, the owner of a rolling suitcase should know its design. This knowledge will help you correctly understand the presence of a breakdown and diagnose it, as well as repair the product yourself or replace a broken part.

How to seal a crack on a computer cover?

This problem can occur for any PC user. You can use your computer for several years without any problems, but someday it will break down.

Everything has a service life, which in some cases is very limited. But what to do with mechanical damage?

What if, after several years of confident field use, a huge crack appears on the lid of your computer, as if by accident, which threatens to put it out of working order.

The crack may be located near one of the fasteners, and may increase if a certain load is placed on it when opening and closing the lid. The service center may charge you too much for repairs. In this article you will find useful information on how to get rid of the problem wisely and without unnecessary expenses.

First, you need to buy glue. For this task, you can go to a hardware store or supermarket and go to the varnish and paint department. The glue we need, unlike the so-called “super glue,” does not leave white marks on the surface and has the ability to dissolve plastic, which will improve adhesion at joints. The glue is relatively inexpensive, costs 120 rubles.

In any store that has dishes, look at this grid. It also costs a penny.

Next, you will need to disassemble the computer, separating the display cover from it. Otherwise it just won't stick together.

If everything is really bad, then it is better to first glue the joint of the crack.

note

Next you need to prepare the grid. It is usually strong, so you will have to work a little. Using scissors, cut the mesh until it has this shape.

As mentioned above, first you need to glue the joints. You just need to do this carefully and without much fanaticism, otherwise it can ruin everything. Be careful if there is glue left on the outside of the lid; it is strongly recommended not to touch it until it dries. After all, when the glue dries, it can be cut off.

When gluing, make sure that the joints are as even as possible. To do this, you may need to bend the lid a little. At the beginning, it is better to secure it in several places with a small amount of glue. It should be noted that the glue does not dry instantly, but gives you 20 seconds to correct what did not stick correctly.

Glue the mesh completely, focusing on the edges and bends. It is better to leave it to dry overnight. Since the mesh is thin, this should not prevent you from installing the cover back on the display.

In the end it will turn out quite well, because the crack is almost invisible.

Source: https://sdelay.tv/blogs/sasha-movchanyuk/kak-zakleit-treshchinu-na-kryshke-kompyutera

What needs to be replaced

Suitcases on wheels, like other travel bags, can break and also have parts in their design that are subject to rapid wear. This occurs due to special operating conditions, exposure to loads caused by the weight of luggage, as well as driving on uneven surfaces.

With careless or prolonged use, there is a risk that some parts will fall off and get lost. However, not every part of the product can be noticed or repaired. Sometimes it makes more sense to buy a new suitcase instead of a broken one.

Everyone has access to independent repairs and replacement of parts that can be made or purchased:

• Retractable mechanisms.
• Stationary retractable handles.
• Wheels and wheel blocks.
• Stands and legs.
• Locks, zippers and other accessories.

Spare parts are made by different manufacturers, so they can be of different quality and have different prices.

Principle of operation

Code locking devices have a number of differences from conventional locks with keys:

• the suitcase opens with three numbers, sometimes four, without the use of additional tools;
• You can change the code information an unlimited number of times;
• the designs provide reliable protection for personal belongings, since quickly opening such a lock without attracting the attention of others is problematic.

However, the device also has a significant drawback: owners often forget the code numbers, especially after a long period of non-use of the accessory. In addition, simple combinations chosen for transcoding are easily deciphered by scammers.

Code devices, regardless of type, have similar operating principles. The locking mechanism includes a recess that is located opposite the number key. By setting a specific code on the suitcase, the owner closes the lock. Immediately after purchase, it is recommended to change the digital combination set by the manufacturer.

Before you change the code on the lock, you need to come up with your own code. It is not advisable to use the date or year of birth, because scammers can spy on your passport details, for example, in line when buying a ticket.

It is best, before changing the code on the suitcase, to come up with a date that no one knows about except the owner of the accessory.

Rules for selecting elements

Most often, choosing a similar part to replace that has become unusable is not difficult, especially in cases of purchasing a suitcase with wheels of popular models produced by well-known brands. Sometimes, for replacement, it is enough to have parts that are similar in appearance and have the necessary parameters that are suitable for performing the required functions.

But there are also situations when it is necessary to choose an alternative option when purchasing or independently producing components of a different type.

When choosing spare parts for a suitcase on wheels, you need to consider the following parameters:

• Dimensions . Many replacement components may have similar or identical parameters (zippers, wheels, legs). The main thing is to measure the dimensions correctly in order to select the appropriate parts.
• Materials . For the manufacture of components for a suitcase on wheels, plastic, rubber, metal, and fabric are used. During repairs, you can replace some materials by installing a part made of higher quality material. This applies to plastic legs - metal legs with a rubberized base will be more durable and of higher quality. But sometimes, due to the design features, it is not practical to replace one material with another, even if it is of higher quality and more durable.
• Load . A suitcase is a product that is subjected to various loads during use and transportation. Each component has strength limits and load values ​​that it can withstand without deformation or destruction. Most of the load in a suitcase with wheels falls on the bottom or moving part. It is for this reason that when choosing a product, you should especially carefully familiarize yourself with the technical characteristics of the problematic components.
• Visual component. Currently, retail chains offer users a choice of products and spare parts for them of various shapes, colors and textures. It is better to opt for parts that are more suitable for a given suitcase so that the product does not look ridiculous.
• Brands. If the user purchases a high-quality product of a popular brand manufactured by a reputable manufacturer, it is recommended that he purchase spare parts for the product manufactured by the same or an equivalent manufacturer. When replacing damaged parts with others that have worse quality and characteristics, the traveler runs the risk that the low-quality part will very quickly become unusable. It is better to choose high-quality spare parts, the parameters of which are suitable for the damaged suitcase.

How to repair a plastic bumper

You will need

• - soldering iron or glue;
• - acetone;
• - sponge;
• - emery;
• - fiberglass;
• - solder wire;
• - clamp or masking tape;
• — fittings;
• — primer for plastic;
• - dye;
• - varnish.

Instructions

Find out the composition of the plastic - its marking should be indicated on the back of the product (for example, PA - polyamide or PP - polypropylene). It is important to study the properties of this material, since the type of repair - gluing or welding - will depend on this.

Thermoplastic polymers (plexiglass, polyethylene, polypropylene and others) are easy to recycle. But you won’t be able to melt the so-called thermosets (they contain phenol-formaldehyde, epoxy and other resins and fillers). You will need special glue.

Select an adhesive composition and epoxy resin for this type of plastic in the building material and consult with a competent seller. Follow the manufacturer's instructions exactly. Sand the surfaces to be glued, clean them of dirt and degrease with acetone.

note

You can glue the crack directly along the seam, or pre-reinforce it with fiberglass.

Use solder wire of identical chemical composition to solder the leaky plastic part.

Sand the working parts a centimeter from the edge, since the part to be welded will have to extend into the allowance left for the strength of the seam. Collect the broken plastic into pieces and secure them with a clamp (fixing tool) or masking tape.

Start soldering thin plastic from the “face” so that an unsightly bump does not appear on the visible surface. Plastic of a denser composition can be repaired immediately from the reverse side. Run the soldering iron along the crack; apply solder and fuse it into the thickness of the softened material. On the reverse side of the work, you can use thicker wire.

Some craftsmen combine plastic with reinforcement (strengthening the structure). To do this, it is recommended to purchase a special brass or bronze mesh (about 0.2 mm in thickness). Cut the reinforcing material into strips of the required size.

Your task is to apply the amplifier to the inner surface of the chip and (heating the plastic with a soldering iron) drown it in the molten material.

plastic makeover . The glued or sealed surface must be washed, sanded with 1000 sandpaper and wiped with acetone.

plastic primer , shake it for 10 minutes and apply to the damaged part from a distance of 20 cm. If the instructions on the package have different instructions, be sure to follow the manufacturer's recommendations. Cover the plastic with 2-3 layers of primer (depending on the depth of the damage), let it dry and again go over the product with sandpaper and acetone. The final stage of repairing the plastic will be spraying a special dye. Make sure it is designed specifically for the material. Apply the required number of decorative layers; Before each new coating, let the previous one dry for 15-20 minutes. If necessary, coat the product with varnish an hour after painting. You managed to repair the plastic, but until it dries completely it must be protected from dust and other contaminants.

Source: https://www.kakprosto.ru/kak-812594-kak-otremontirovat-plastmassovyy-bamper

Retractable handle

Most often, telescopic tubes break on bags with retractable handles. In addition to them, the shank of the corners attached to these tubes breaks off.

This kind of damage is easy to fix. For this:

• The telescopic tubes and the retractable handle are disconnected. To separate them, screws are unscrewed on their sides. The most common failure is a broken shank of one corner. Finding a spare part is difficult, so repairs will require available tools. Repair is carried out as follows:

• The shank is attached to the corner together with the base of the retractable handle with a screw or a long self-tapping screw. If you do not have a suitable screw or self-tapping screw, you can find an alternative fastener - use a screw that has a head that is the most suitable in diameter. If necessary, install additional flat washers.

• To eliminate the possibility of repeated failure, experts advise doing the same with the other corner.

• Several through holes are made in the retractable handle with a diameter that matches the fastener.

• Then you need to screw the nut onto the screw, and then, using a regular soldering iron, fuse it in so that it is level with the surface of the handle. Melted plastic is formed, which is cut off with a blade or filed with a file.

• The corners should be secured to the crossbar with screws and washers.

• After this, the handle shanks are inserted into the telescopic tubes and secured with two self-tapping screws.

Certificate "Ideal Beloved"

Are you ready to give your boyfriend or spouse a real jackpot by stunning him? An excellent DIY option would be a certificate for several wishes or points. Such a gift is used not once, but as each specific desire is spent.

1. Checkbook of desires.

To create a checkbook you will need a color printer, A4 paper, a hole punch, scissors and a little creative magic. In the Microsoft Office Word document creation program, use a table to create small cards in the form of pictures, supplementing them with inscriptions. A simpler option is to simply write your wishes on a blank sheet of paper in a beautiful font without using pictures. We printed it out and cut it into even cards. A neat hole with a hole punch, secured with lacing or tape, and your checkbook of desires is ready. As your wishes are fulfilled, you can put your signatures in the book about the service used, or completely remove sheets from it.

Check options:

1. Night of love
2. Breakfast in bed
3. 10 compliments
4. A culinary masterpiece just for me
5. Belly dance/striptease
6. A day off without household chores
7. Beer with friends

1. Gift certificate with points.

A simple and at the same time effective way to create a certificate. There is no need to cut anything out; you can put the entire list on one A4 or even A5 sheet. Come up with 10-12 wishes, assign any number of points to each. Print out your handmade gift and insert or paste it into a romantic card. As you spend points, simply cross off your fulfilled wish from the list.

1. Certificate for 3 wishes.

If the two previous methods are designed for at least 10 wishes, then this option is more compact, but no less presentable. Not every girl can endlessly fulfill desires, even pleasant ones. And a limited number - only three - is much easier to complete. And they will be used faster. Such a surprise will undoubtedly please both your loved one and you. The method of its manufacture is generally no different from the previous one. Just decorate the certificate with a frame and a nice font, put it in an envelope and give it to your loved one.

You can give a gift certificate that is not related to the fulfillment of wishes. Design it in the form of a postcard, where the “filling” will be the top 10 reasons for your lover’s adoration, etc. Such a gift will be unforgettable. touching and romantic. The truth that the best gift is one made with your own hands will never lose its relevance.

Wheels

Wheels in trolley bags and suitcases are the most vulnerable and most often broken element, since they are the ones who are forced to withstand the main load. Careless or prolonged use leads to the fact that some elements fall off and are lost, and it is not always possible to quickly find a full replacement for them.

If this happens, it is necessary to strengthen the tubular axle to which the wheels are attached. You can strengthen it using a metal rod inserted into a hollow tube.

However, this method can only be used when the entire wheels can withstand the load placed on them, and it is impossible to fully replace the lost structural elements.

To securely fasten the remaining parts to the axle, you must use nuts. First, a thread is applied to the metal rod, which can be applied independently using a die that is installed in the holder.

After threading the two ends of the rod, it is inserted inside the tubular axle, then the wheels are attached to the axle using nuts and washers. For greater reliability, the structure is secured to the ends of the axle with locknuts.

Broken suitcase wheel unit

Unscrew the stand and cut out two metal plates

Drill holes in the plates for the stand and solder the nut

We fasten all the parts with a 50x50 screw

We put a washer on the screw and screw on 4 nuts so that the wheel does not move out

Screw the wheel block to the suitcase

We put on the wheel, lubricate it with oil and tighten the lock nut with a washer to fix it.

Do-it-yourself laptop cover repair for 126 rubles

So, the story is painfully banal, the laptop slipped off the sofa and fell, while the lid in the hinge area broke so that the screen stopped locking in the desired position, tried to fall, and in order to close the lid or open it with one working hinge, it was necessary to resort to very scrupulous , dangerous rituals, which did not add comfort during work.

Using a laptop with a broken case has become simply dangerous ; at any moment there was a high probability that the cable would break, the matrix or the remaining loop would break and the device could be thrown in the trash, because... Repairing it at a cost would be close to buying a new one.

The first thing I did was start looking for a new cover for my Sony Vaio laptop, to replace the broken one, and although the model is quite common, I couldn’t find a good offer in my city, or even in the region, for reasonable money, either in the services repairs, not on Avito.

After which it was decided to try to restore the existing cover while I was looking for a replacement, because the laptop is used quite actively at home for work and I wanted to avoid more serious damage.

Since the decision to repair the hull in the loop area is temporary, it was planned to spend a minimal amount on its implementation.

Then I went to the nearest “French supermarket with a bird” and bought the following:

— Epoxy universal glue EDP – 106 rubles

— Super glue “Second” — 12 rubles

— White construction bag – made of polypropylene fiber – 8 rubles

By the way, you could still save money by choosing a smaller volume of epoxy glue and the cheapest superglue, and even bring the bag from the garage.