How to pack a business suit for travel

Are you going on a business trip yourself or are you bringing your husband? Then you are faced with the question: how to fold a jacket and business suit on the road so that they do not wrinkle. The peculiarity of these things is their bulkiness and many details.

A simple option is a backpack. This is a travel case that holds suits, shirts and jackets. But not all men like to carry a separate bulky bag with them, so you have to get sophisticated and use feminine tricks.

Work algorithm

The parts need to be ironed in a certain sequence.
Proceed as written below, then you will like the result of the work: Pockets. Ironing begins from the pockets, from the wrong side. They need to be turned inside out, the folds smoothed out and ironed through a damp cloth, and then carefully turned back inside out. Sleeves and shoulders. This is perhaps the most difficult moment. It is better to moisten both sleeves and shoulders and continue ironing until dry. In this case, a special stand for sleeves will be very useful. Such stands are sold complete with modern ironing boards or purchased separately. It won’t be easy to iron sleeves just on a board, but there is a way out. Use a folded towel and insert it inside your sleeve. There are also special pads for the hangers, and if there are none, adjust the towel again. Pay attention to the seams, elbow and shoulder - they must be carefully straightened and ironed. Collar, back and shelves If we ironed the previous parts from the inside out, now the jacket needs to be turned over to the front side. It is not difficult to iron the back and shelves, and after this stage the work can be considered almost finished. Collar and lapels. These details must be treated with the same attention as the sleeves. Although they are small, with a wrinkled collar or lapel the jacket immediately loses its appearance. They should be ironed from the front side through a damp cloth, just like the back with shelves

If the part is very wrinkled, tighten it with one hand and carefully apply the iron with the other. In this case, it is advisable to wet not only the material through which you are ironing, but also the part itself

It is convenient to straighten the corners with the sharp tip of the iron.

Jackets are made not only from suit fabrics; leather, wool and corduroy models are also available. Caring for them varies and is described in detail in other sections of the site.

Now let’s pay attention to the features of ironing a wool and corduroy jacket

Steam generator application

A steam generator is a convenient device for steaming any clothes. It’s very easy to tidy up your jacket with it. The steam generator is filled with water and the vertical steaming mode and the desired temperature are set. The jacket is hung on hangers. First, steam the sleeves by lifting them with your free hand. For steaming, the steam generator is kept at a distance of 10-15 cm. Then the shelves and back are steamed one by one. If the fabric is fleecy, then the steam generator is kept at a distance of 20 cm from the surface. Work should be carried out with movements in the direction of the pile. A good alternative to a steam generator is a hand-held steamer. It is comfortable to hold in your hand. The operating principle is the same as with vertical steaming.

How to fold a jacket?

By using the correct folding technique, you can avoid the appearance of small folds and creases on products. Let's consider several options that will help preserve the appearance of the product as much as possible after transportation.

Method No. 1

How to fold a jacket without wrinkles:

First of all, we turn out one of the sleeves and align the stand along the shoulder line.
The second sleeve does not need to be turned out. We insert it with the shoulder into the shoulder of the inverted sleeve, carefully leveling it along the entire length.
After this, lay the jacket on a horizontal surface and align the sides.
We correct the sleeve and lay it on top. The end result is a rectangle that has equal sides. This folding process creates a void inside the shoulder, which, when folded, creates a fold.

Method No. 2

In order not to spoil the appearance of the jacket, fold it this way:

We take the jacket by the collar part and twist only one shoulder to the wrong side.
Using the other shoulder, we insert the half of the jacket into the resulting space. If you managed to do everything correctly, then the front surfaces of the hangers should be in contact with each other. In this case, the jacket is turned inside out.
We align the halves of the product at the seams so that a rectangle is formed.
We fold the resulting structure in half.

Method No. 3

This method of folding involves not turning the jacket inside out. In this case, shallow folds form in places where there are kinks on the front side of the product. Therefore, when you travel, you cannot take your jacket out of your suitcase and immediately wear it to a special event.

How to put a jacket in a bag:

Unfold the product on a horizontal plane so that the back of the jacket is at the top.
We take the jacket with one hand at the point of the middle of the shoulder and mentally find the middle line along the back surface of the product.
We wrap part of the jacket up to this line.
Align all seams on the sleeve.
We wrap the other side of the product in exactly the same way.
The third fold occurs by folding the resulting rectangle in half so that a square is formed.
We put the jacket in the bag.

Method No. 4

To fold your jacket correctly, you need to do the following:

Together with the sleeves, turn the jacket inside out. We put our hands inside in order to straighten the shoulders well. In one hand we connect the two shoulders, and with the other hand we take the product in the middle of the collar

We carefully straighten the clothes, especially paying attention to the seams that are located along the length. We straighten the fabric from both the front and back sides. Turning over the elbow, fold the upper part of the suit along a horizontal line. The result is a square convolution

This form does not take up much space and can easily fit into any bag or suitcase.

Method No. 5

How to fold a jacket to preserve its original appearance as much as possible:

We place the upper part of the suit on a table or any horizontal surface.
Fasten all the buttons.
Carefully turn the clothes over with the buttons facing down.
With one hand we hold the product in the middle of the shoulder seam, with the other hand we take it by the lower part of the jacket and wrap the side along with the sleeve onto the back of the garment.

Now let's move on to the sleeve. We bend the sleeve along the armhole line so that it is strictly parallel to the previous fold.
Using the same technology, you need to fold the upper part of the suit on the other side, and fold the second sleeve in the same way.

Fast

A great option on how to simply and correctly fold a jacket so that it doesn’t wrinkle. The main thing is not to fuss, do everything very carefully.

Progress:

Place both arms through the shoulder part. The jacket should be in front of you. Hold with your palms from the inside out.
Bring your arms together, bringing the shoulder seams together as much as possible.
Place one part of the jacket on top of the other.
Straighten the collar, lapels, align the line of the fastener.
Fold the jacket in half with the front facing up.

With this method of folding, there is no unnecessary pressure on the collar and shoulder part. Therefore, the jacket practically does not wrinkle after transportation. You can take it out, straighten the collar and put it on right away.

Putting shirts in the closet

The best way to store shirts in the closet is considered to be the “hanger” method on a hanger. It is recommended to fasten them with all the buttons. Then the front slats will be in a vertical position and will not move, and, accordingly, wrinkle.

If your apartment or hotel does not have hangers and a special compartment in the closet for them, then you need to store things on shelves. The diagram clearly shows step by step how to fold the shirt sleeves and how this process should occur. Experts advise using cardboard, which is sold along with the product. If you, like many people, threw it away, then don’t worry, as it’s not difficult to find a replacement. You can replace it with a simple rectangular piece of cardboard from a children's art kit, purchased at an office supply store.

We transport clothes correctly

If you have to spend a lot of time on the road, and then almost immediately leave the ship for the ball, then purchasing an item such as a backpack is your first necessity. Only by placing your suit in a suitcase can you be sure that it will retain its decent appearance, no matter how long the journey may be. At the same time, you can put not one, but several suits, shirts and all the necessary accessories in it.

When choosing a backpack, pay attention to how securely it holds the clothes, because its decent appearance depends on this parameter. Remember that such baggage on the plane is included in your hand luggage and does not have to be checked in. And the main rule that must be strictly observed in relation to the backpack: it should not contain anything except clothes. Foreign objects will wrinkle the suit in the same way as it would wrinkle in an ordinary suitcase.

If business trips do not happen very often, then purchasing a backpack is unnecessary. There are other ways to transport suits. In particular, they can be transported in luggage if you know how to fold them correctly. You need to remove the belt from your trousers and check your pockets to ensure there is nothing unnecessary in them. Then the trousers (pre-washed and ironed, of course) are folded in half lengthwise and then rolled into a tight roll. You need to twist starting from the cuffs. Before folding the jacket, you must fasten all the buttons and check that there is nothing foreign in the pockets. Then the jacket is turned upside down and the sleeves are laid on it along the shoulder seam. After this, take a thick terry towel and place it on top of the jacket. The jacket is then folded in half so that the towel serves as the outer layer. This “packaging” is placed at the bottom of the suitcase.

Useful tips

Before folding a jacket with trousers, it is better to familiarize yourself with the following rules:

Before placing the suit, you should steam it thoroughly in a dry cleaner or yourself, if you have the skills and a special tool.
It is necessary to remove all objects from the pockets so that their shape is not imprinted on the product.
It is not recommended to fasten product parts with clothespins or clips; dents will remain on the fabric.
It is better to use a special bag to pack the jacket and trousers, leaving a small amount of air in it, which will become a layer between the suit and other things.
To further protect the product, packaging materials can be used. Things are placed on a piece of paper or polyethylene and rolled up with them. In this case, the material is secured with tape at all stages.
It is better to practice folding items of clothing beforehand, since it is not a fact that you will get a neat fold the first time.
It is necessary to ensure that the folds, if possible, go straight along the seams.
If, upon removal from the suitcase, wrinkles were found on the items and you had to use hot steam to remove them, then you need to let the items dry well on a hanger before putting them on.
To keep the number of folds and irregularities to a minimum, it is better to pack things in a bag or suitcase made of hard material.
Tough, bulky shoes are placed near the sides of the suitcase so as not to wrinkle the suit.

The main place in the suitcase is reserved for storing the jacket and trousers; casual clothes, underwear, socks and other things are placed in the free space.

Using the rules for packing a jacket and trousers, you can transport a suit in a suitcase and still maintain its impeccable appearance. Ironed edges, lapels, pockets, vents on a jacket and creases on trousers will remain in perfect condition if the items are folded carefully and neatly.

What is it for

Properly storing jeans and other wardrobe items is necessary not only to free up additional space and restore order. There are equally compelling reasons:

The time spent on ironing is compensated by compactly folded pants.
An open closet evokes positive emotions in both sexes when beautifully arranged stacks are revealed to the eye.
The time spent searching for the right pair of jeans is reduced.

A person is able to discover more than one positive aspect for himself by learning how to fold jeans correctly.

Preparing for ironing

Before ironing your jacket, make sure it is clean enough.

Important! If there are any stains or dirt on the fabric, after heat treatment they will go deep into the fibers. It will be difficult to remove them. If there is no serious contamination, still clean the product with a clothes brush

This will help remove dust and hair. Then lay out the clothes on the ironing board. Every time you refold it, carefully straighten out the folds on the lining and on the front side.

If there is no serious contamination, still clean the product with a clothes brush. This will help remove dust and hair. Then lay out the clothes on the ironing board. Every time you refold it, carefully straighten out the folds on the lining and on the front side.

In order to properly iron the suit material, you will need a damp cloth. It will act as a protective pad between the surface of the clothing and the iron. Linen is best suited, but cotton can also be used. The simplest option is gauze, which needs to be folded in several layers and moistened during ironing. It is better to take settled water and pour it into a cup. If you can pour it directly into the iron, then it is more convenient to moisturize the fabric with its help.

Classic models usually begin to shine if you iron them directly on the surface. If the jacket has already begun to shine, wet it and iron it through a dry cloth.

When you turn on the iron, immediately set the temperature setting. A guide to the choice of heating is the label on the reverse side of the product.

For items made from natural wool, the temperature should not exceed 165°C.

What to do if clothes are wrinkled after transportation

It may happen that despite all your efforts and strict adherence to the rules when packing your suitcase, your shirt is still wrinkled. What to do if you don’t have the time or opportunity to iron a thing, but you need it? Restoring a decent appearance is not difficult at all.

Use the "steam" method. Turn on the hot water in the bathroom and close the door tightly. After the air temperature and humidity in the room rise, leave the shirt hanging on a hanger there for 15-20 minutes, and then wait for it to dry. Do not put the item on immediately after “steaming” the folds; wait a while, otherwise the item will wrinkle even more.

It should be noted that this method is effective in many cases, but there are exceptions. For example, some types of linen or cotton fabrics will become covered with even more folds from such exposure than were originally there. In this case, all you have to do is use an iron if your suit is wrinkled.

How to transport business suits?

So as not to look at negotiations or a meeting with a client as if you didn’t take off this suit from your high school graduation.

As a rule, when you need to go on a business trip or make a business trip, you can easily get by with hand luggage. But not a single ordinary small suitcase, which you definitely have, will keep your suit in its original perfect appearance. And even if you get off the ship straight to the meeting, this should not serve as an excuse for why you appear in a crumpled and shabby state. So we’ll tell you how to transport suits so that they are your strength and not a reason to be embarrassed.

How to fold a jacket into a suitcase

Everyone who has ever gone on a business trip for important business negotiations faces the problem of how to put a jacket in a suitcase. At such meetings, a formal suit is a must. It is clear that it includes such an important detail as a jacket.

In fact, a jacket is a rather difficult item of clothing to transport. It has significant dimensions, various small parts, the material wrinkles very easily, and is sometimes very difficult to fold. However, despite such difficulties, it can be packaged in several ways, each of which does not imply anything complicated. We will tell you how to cope with difficulties and deliver your jacket to its destination safe and sound.

Recommendations before packing

Before you start packing your jacket into your suitcase, be sure to check that there is nothing unnecessary left in your pockets. Besides:

It needs to be petted.
To protect it from dirt, you can lay it on a large sheet of wrapping paper and then wrap the jacket or use plastic wrap.
The packaging can be easily secured with adhesive tape.
Special vacuum bags can replace paper and film, from which the air is pumped out after packaging.
To prevent things inside the suitcase from shifting when shaking, fill the free space with small items of clothing - panties, socks or T-shirts.
A hard-shell suitcase will always keep your suit in its best condition.

It would be a good idea to further practice the chosen method in order to spend less time on it, which is already not enough when preparing for a trip. You can save time by making a list of things you will need on a business trip in advance.

How to fold a jacket neatly

You need to fold your jacket for storage or travel so that it remains unwrinkled and takes up little space in your bag. If you follow all the recommendations, the item will retain its original appearance.

How to fold a jacket without wrinkles

You can fold it compactly in a simple way:

Take the item by the collar and turn one shoulder inside out.

Before storing your jacket, be sure to clean it and iron it with steam. This allows you to smooth out the wrinkles well. If there is no heavy contamination, then you don’t have to send the item to the dry cleaner.

This method is also suitable for folding a jacket into a suitcase or travel bag. The video shows the process in more detail.

How to fold a jacket for a gift

There are times when a woman wants to present her man with an expensive and practical jacket or suit for a holiday. Simply bringing it on a hanger will not be entirely appropriate; the item needs to be beautifully folded and packaged.

You can do this just like in a store without turning the product inside out. A little trick will help you lay it out beautifully:

Place the item on a flat, hard surface with its back facing you.

Now you can pack it in a transparent gift bag and tie it with ribbon. However, it is worth noting that you will have to iron the item before putting it on.

How to put a suit in a suitcase

There are different ways to compactly fold a men's suit for a short business trip into a suitcase. But the most beloved among the strong half of humanity remains this one:

Turn one sleeve inside out and align the collar. Insert the second sleeve into the first without turning it inside out.

Many men can confirm that folding a suit or jacket into a bag in this way is very convenient. The item retains its appearance and does not wrinkle. However, the product is first ironed well. This can be done in the classic way, but through a thin natural iron, so as not to spoil the fabric.

How to neatly fold a suit into a backpack

To fold the suit for a long journey, it is convenient to roll it up or roll it up. The jacket is treated as described above, and the trousers are folded in half, aligning the arrows. Next, they put them on top of the jacket, and roll everything up.

The compact package fits well even in a small backpack. And what’s remarkable is that there is no need to iron the suit before putting it on.

How to fold a suit into a bag

Before storing the suit in a bag, it must be folded correctly. There is a small instruction on how to do this compactly:

Fold the jacket in half at the center of the back. Place one shoulder over the other. It turns out that the first side of the product is inside out. Pull both sleeves to the wrong side and roll them over the back.

How to fold a jacket compactly

Folding a jacket so that it takes up little space and doesn’t get wrinkled requires a lot of effort. This can be done in a simple and accessible way:

Turn the sides of the product inside out so that the sleeves remain inside.

How to fold a jacket for travel

There is another simple way to put a jacket for a business trip in a travel bag or suitcase. To do this, proceed according to the instructions:

Turn the sides inside out.

This method allows you to store the jacket in your bag for several days. After which you need to take it out and hang it on a hanger. Over time, the item will return to its original appearance.

How to fold a jacket beautifully

You can roll up the thing beautifully and compactly as follows:

Place on a hard surface with your back facing you. Spread the sleeves to the sides.

However, before packing it in this way, it is cleaned of any dirt, pockets are emptied, and ironed.

How to pack a jacket

The jacket should be packed flat for long-term storage. It, together with the hanger, is placed in a special bag or case, which is fastened along its entire length. After this, the bottom edge of the cover is folded to the top. The result is a compact package that can be placed in a box.

"Rectangle"

It is recommended to fold this way if the jacket has to be transported in a hard suitcase. The folded trousers should be placed inside the clothes, and the rectangle itself should be placed between the layers of the rest of the clothes.

Sequencing:

Unbutton the jacket, straightening the collar.
Turn one shoulder part inside out and carefully smooth out the sleeve.
Place the other shoulder part into the first without turning it inside out. Align the seams, straighten the folds on the sleeve.
Connect and align the shelves along the long edge.
Fold the product in half.

The jacket folded into an envelope will remain placed in a case (package) or immediately packed into a suitcase.

Folding methods

There are several common options for packing a jacket in a suitcase to preserve its appearance. If everything is done correctly, upon arrival at your destination you will be able to take it out of your suitcase ready to wear.

Roll

In this case, the jacket is folded into a small neat roll, which is placed at the bottom of the suitcase. The method is quite difficult, but when you take it out of your suitcase, you can immediately put it on. If you travel frequently, you simply must master it to perfection. This method will also work for any other clothing. This installation is performed in the following order:

one sleeve is turned inside out, the collar should be straightened;
the second sleeve is inserted inside the first, so that both elements are the same length. Check that the seams on the sides of the sleeves are parallel;
the jacket is aligned along the edges on a table or other flat surface to obtain the correct rectangular shape;
the sleeves are rolled up towards the middle; it is recommended to place rolled up socks, a T-shirt or just a wad of paper inside. This will help avoid shoulder jams;
The resulting rectangle is tightly rolled into a roll. It is advisable to place it down and against the wall of the suitcase so that it is pressed against other things on the road.

Rectangle

Another way to prevent your jacket from getting wrinkled on the go is to fold it into a rectangle. In this form, it will also take up very little space in your suitcase. Rolling it up this way will be faster and easier. This method is good for folding wool products. Procedure:

the jacket is turned inside out;
the shoulders are straightened so that the inserts in them do not interfere with folding it;
The jacket is taken by the shoulders and the middle of the collar, folded vertically and aligned along the side seams. The result should be a rectangle;
at the final stage it is folded in half again. It is advisable to put some things under the suitcase and press it with something heavy on top.

Fast

Folding a jacket in this way is very easy, but it has its drawback - “creases” may appear on the fabric. It will also not be possible to use it if the material of the product is too thick. If “creases” could not be avoided, after removal you need to iron or steam the jacket. Thus, this method is suitable for those who do not need a suit immediately after arriving at their destination. If it is made of materials that wrinkle easily, you should put a rectangular piece of cardboard or a thick magazine inside. The jacket is folded in the following order:

lays out on a flat horizontal surface with its back facing up;
the shoulders together with the sleeve are alternately folded over the back so that the edge of the hem lies along the seam in the middle;
the sleeves are aligned parallel to each other, the folds are straightened and smoothed out;
The jacket folds in half. In this case, you can put suit trousers or other items of clothing inside. This will make the inevitable creases on the fold less noticeable. To prevent it from unfolding, you need to put a few things on top of it.

"Like a shirt"

When folding a jacket this way, it may also wrinkle a little and will require ironing or time to loosen. In this form, it should be laid on top of other things so as not to crush the collar. We collapse it step by step:

the jacket is buttoned and laid out with the back up, the sleeves should be straightened;
the edges of the jacket are wrapped towards the middle of the back, you should be guided by the seam;
the sleeves are laid flush with the resulting edge so as to form a rectangle;
it flips over and folds in half.

Portfolios

It is most convenient to transport a suit in a suitcase. It is created specifically for delicate transportation; things in it do not wrinkle and retain their shape. Depending on the size and model, it can correctly transfer one or more suits, as well as shirts, ties, and belts. It is enough to carefully place them in the appropriate compartments, and upon arrival, hang them on hangers and allow them to smooth out a little under the influence of the fabric’s own weight.

Using portpads has other advantages:

But it is important to know one subtlety, how to change suits on an airplane. It is not permissible to carry foreign objects (food, drinks, cosmetics) in a suitcase that can wrinkle or stain things.

To properly transport your business wardrobe, you need to purchase a good quality briefcase. Samsonite products have proven themselves to be excellent.

The most significant drawback of cheap models is the soft side walls. Such accessories do not protect things from external influences and are no more effective than thick plastic bags. It’s almost impossible not to wrinkle your suit on the road wearing them.

An equally important criterion is a representative appearance; partners who come to negotiations are often greeted. And a cheap accessory in your hands will make an unfavorable impression. It is better to choose leather backpacks; they provide maximum protection from rain and unpleasant odors. But there are also decent models made of leatherette and textiles with water-repellent impregnation. You also need to pay attention to the capacity of different models. For many, it is important how many suits you can take with you without getting wrinkled: one or several.

Face-out folding

In this case, you should not turn the jacket inside out, but this method is not suitable for everyone, since folding the suit in this way will not allow you to immediately put it on upon arrival at your destination and go to a business meeting. And all because with this folding option, creases and folds may form on the front side of the product. But if you have the opportunity and time to iron or steam your jacket, you can easily use this method:

Place the jacket face down on a flat, flat surface. Mentally draw a line down the center, starting from the neckline and ending with the bottom edge of the product. Then grab the corner of your shoulder with one hand and hold the bottom of your jacket with the other. After this, fold this part of the product right side onto the back. Try to keep the side edge of the garment aligned with the center line on the back. Carefully place the folded sleeve on top

It is important that its borders do not protrude beyond the figurative central line. Extend the sleeve over its entire length and check that the seams are even. Do the same with the other side of the jacket.

Place the folded second sleeve on top of the first. It turned out that the product was folded in three. Once again, walk your hand along the entire length of the clothing and smooth out any possible waves, folds and creases. The final step is to fold the suit in half so that the product has a square appearance. To avoid severe kinks and folds, place any other folded clothing inside the jacket before folding. For example, it could be suit pants or a pair of T-shirts. Now you can put your jacket in your bag. To prevent the item from unfolding, place several dense items on top of it.

How to fold pants and skirts correctly

Fold the trouser legs one on top of the other, but be careful: if they are jeans, you can fold them vertically along the seams, but suit trousers are a different matter, they need to be folded along the arrows.
Now fold them in half. If we are talking about jeans, then if you want, you can first fold the top part, and then fold it in half again, or roll them into a tight roller entirely.
If they are suit trousers and the suitcase is long enough, you can leave them like that (in the shape of a rectangle) or fold them in half (receiving a square) and, if you like, in thirds.
Fold the skirt in half and then roll it up. You can start either from the waistband or from the hem - the fold will still remain in the center. Hopefully it will straighten out when you hang things up when you arrive. If possible, choose skirts made from fabrics that do not wrinkle as soon as you put them on and take up very little space when folded.

Useful tips

You can use ribbon or an elastic band when rolling the jacket into a roll shape. In this case, the packaged item will not unwind.
It is better not to place a folded jacket at the bottom of a bag. Things on top can ruin its shape. Then all efforts to maintain a neat appearance of the jacket will be in vain.
You can compactly fit a suit into a suitcase by rolling the jacket and trousers together into a cylinder shape.

The best option when transporting suits and business clothes is to use covers and travel hangers. However, the tips described above will definitely simplify your life and save you from unnecessary hassle during your vacation or business trip. If the clothes could not be prevented from getting wrinkled, and there is no iron nearby, you can hang them in the steamy bathroom. The steam from the hot water will soften the fabric and remove small wrinkles.

How to transport a suit

A careless appearance, even slightly wrinkled clothes, will make an unfavorable impression and may negatively affect the results of negotiations. Therefore, it is important to know how to transfer a suit without wrinkles, regardless of how much time you have to spend on the road or what type of transport you use.

You should not wear clothes on the road. After a flight or a trip on a train or in a car, it will look stale, which is unacceptable. Leading manufacturers of business clothing and travel accessories offer a fairly wide range of products for transporting suits:

What to use in a particular case depends on the purpose of the trip, the type of transport, and how often the suit needs to be transported. If you are buying expensive clothes, it is not advisable to skimp on accessories that will help maintain its presentable appearance.

Features of storing jackets

A men's suit costs a lot of money, so you want it to last longer. To do this, you need to properly care for it.

The jacket should be stored in a spacious closet, on a hanger. But the usual one won't do. The best option is a wooden one in a case. It is allowed to use plastic hangers, but they will not withstand heavy sets.

To protect the suit from pests, the item is stored in a case. It is also used for transporting wardrobes. For everyday use, a synthetic case is suitable, but for long-term storage it is packaged in a bag made of natural fabric. It will protect the item from mold and pests.

If there is no dressing room, you need to store it in a closet. But it is regularly ventilated so that there is free access of air and moths do not appear.

Important! It spoils products made from natural fabric, so pest control products are used.

What's the best way to store pants?

The ideal option for storing trousers is, of course, on hangers, and in the following way:

The trouser legs are clamped with two horizontal strips (for classic trousers) or clothespins (for trousers made of thick fabric) on both sides at the very bottom. It turns out that the trousers hang full length downwards with their pockets, which requires a sufficient height of the closet. The good thing about this method is that it virtually eliminates the risk of the trouser fold shifting.

The classic “flip” option is also not bad, but long-term storage may leave creases in the knee area. Hangers with a horizontal bar, wide and upholstered with soft foam, can minimize the appearance of creases. The trousers are thrown over the soft shelf of the hanger and wait for the owner without loss of appearance:

Useful tips

If your shirt is still a little wrinkled in your suitcase or bag, there is one simple method to correct the situation. You need to hang it on a hanger in the bathroom and open the hot tap, preferably in the shower. When the bathroom is filled with steam, turn off the water and hang the hanger in the thick of the steam. The item should remain in such a steam room for no more than 5-10 minutes. After this, you need to hang it on a hook in a dry room. It will look great, as if it had been ironed.

This method cannot be used in only one case - if the shirt is linen. Although this is a natural fabric, steam can cause it to decrease in size and shrink.

Some tricks

After the trip, you need to immediately take things out of your suitcase and hang them on hangers or at least on a chair. There is no point in keeping the fabric rolled up longer than necessary .
A compact folding hanger does not take up much space in your suitcase and will always come in handy.
A travel iron can be a useful accessory, but if you can't steam your suit, you can hang it in the bathroom and run a hot shower. The resulting steam will do everything itself in a couple of hours. Then you just need to dry things in a ventilated area.

How to fold a jacket: methods and rules so as not to wrinkle, useful tips

It is customary to store outerwear on trempels, wrapped in a special fabric or wearing a cover for the summer season. But it is not always possible to place all the things in the dressing room; for some there is simply no room

Therefore, it is important to learn how to quickly fold a jacket. This skill will also be required if a person goes on a business trip where he takes a jacket, but he does not want to start ironing from scratch

Basic ways to style a jacket

There are different ways to fold a jacket. However, some of them require preliminary turning inside out, others do not.

The most popular method is to roll it; after this, the clothes always retain their original ironed appearance. There is less chance that outerwear folded into a rectangle will remain in order. But this method takes a minimum of time.

If the likelihood that something could spill is minimal, then you can fold the jacket without turning it inside out.

Roller

Rolling a jacket into a cylinder requires special care and skill. The algorithm is quite simple:

iron the jacket thoroughly;
turn one sleeve inside out;
move your shoulder along the required line;
Insert the second sleeve into the first along the entire length, and of course there is no need to turn it inside out;
place outerwear on a flat and large table;
align the edges of the product;
fold straight up, along the sides;
be sure to ensure that the bend is along the seam itself and does not extend beyond it;
place something bulky on the shoulder recess that you won’t mind if it gets wrinkled (for example, a T-shirt for sleeping, a few warm socks);
roll slowly into a roll or cylinder.

When folding, be careful. Creases may form. To prevent this from happening, it is necessary to straighten sections of the fabric if this is foreseen.

Most often, the cylinder laying method is used when you need to place a jacket in a closet for storage.

If you plan to take things on a trip, it is better to roll them in a different way - this way they will take up less space.

Without eversion

The folding without turning option does not always show the best results. It is possible that creases may form on the outer back of the product. Therefore, it would be a good idea to take a special fabric steamer with you in your luggage. However, it needs to be turned inside out, which significantly speeds up the procedure. Required:

fold the jacket on a flat surface with the outside down;
straighten it over its surface so that no kinks form;
bend the outer part of the product towards the back (to do this, you need to visually divide one of the parts of the item into two parts);
carry out identical manipulations for the second side;
fold in half.

Inside this jacket you can immediately put trousers, previously ironed and correctly folded.

How to fold a suit correctly

Essentially, the jacket folds in one of the last two ways. The trousers are placed inside it. So that there are no creases on them, the arrows do not have to be smoothed back, you need to learn how to fold them correctly:

take the trousers by the waist line;
pull them out lengthwise (to do this you will need to raise your hands);
fold the trousers strictly along the arrows, to do this you need to hold them with one hand and grab the folds on both legs with the other;
connect the arrows;
straighten your trouser legs to avoid creases;
fold onto a flat surface and level again;
fold three or even four times - depending on the length and width.

It is important to consider that the bottom of the trouser leg should be inside the folded product. And the belt should only be on the outside

If you change the order of distribution, the hem may become very wrinkled.

Types of trousers and ways to fold them

Each type of trouser uses its own methods.

Jeans

Before you put your denim item on the shelf for storage, you need to perform a number of actions:

Be sure to remove the belt and empty the pockets;
check for dirty areas (if there are dirty spots, the jeans need to be cleaned before styling);
shake the product vigorously, after which you need to pull the edges of the trouser legs;
jeans are laid out on the floor or table;
fold the pants in half, connecting the legs;
smooth out all creases;
connect the bottom of the trouser leg with the belt;
the resulting rectangle is folded in half again.

Pants without creases

The trousers will take a little work. Fold them along the seams, which are located on the side:

the product is laid out on a horizontal surface;
bend in half through the zipper, grabbing the product in the crotch area;
To prevent bending throughout the entire fabric, it is better to keep the trousers on a special hanger, which has a crossbar with foam rubber.

Delicate trousers

Trousers made of cotton or linen wrinkle quickly, so it is not advisable to fold such items several times. At the bend site, creases form that will be difficult to smooth out.

If you need to take clothes with you in a suitcase, then when folding it, it is recommended to put plastic film under the fold. The film softens the kinks and makes them not too noticeable.