How to fold a shirt quickly: 7 easy ways

In a large family, the issue of storing things is very important, especially if the living space does not allow for closets for each member of the household. You can save space in your wardrobe by using the top and side shelves, and it is important to fold your shirt correctly so that it does not wrinkle. It is worth considering a few recommendations for storing shirts, as well as similar items of clothing with long or short sleeves and collars.

Organizing things inside the closet

How to fold a shirt with the sleeves facing up

Bonobos YouTube Channel
Place your buttoned shirt with the buttons down. Place the sleeves crosswise.

YouTube channel Bonobos

Fold the sleeves up so that the cuffs reach the collar.

YouTube channel Bonobos

Fold the left and right sides towards the middle of the shirt.

YouTube channel Bonobos

Mentally divide the shirt crosswise into three equal parts. Fold it twice along the marked lines.

YouTube channel Bonobos

All the details in this video:

Features of storing shirts

Most often, they try to hang such an office wardrobe item on hangers, but there are situations in which the item needs to be folded. There are several general rules:

You only need to fold a carefully ironed shirt. It is recommended to collect all washed items, iron them and begin the folding process only after the fabric has cooled. Cotton fabrics that are hot after ironing can become very wrinkled, so you need to wait about 30 minutes, hanging the clothes on hangers during this time.
Fasten the buttons from top to bottom, as well as on the cuffs of the product, using your hands to smooth out any wrinkles that may have formed. This will prevent the appearance of unwanted fabric deformations.
Carefully fold the shirt on the shelf on top of other items. There is no need to put heavy things on your office outfit; one stack can contain no more than 3 light wardrobe items.
A men's shirt made of expensive fabric should not only be folded neatly, but also wrapped in parchment paper. This will provide the product with protection from accidental stains during transportation.
The shirts are folded with the right side outward; they must be placed on the shelf with the jack on top of each other. It is important to support the collars; for this it is best to use special plastic holders from new things or select suitable soft objects.
Men who often go on business trips are advised to purchase a separate bag for storing their office wardrobe; these can be found in stores. You should also buy products made from special fabrics that do not wrinkle too much.

Advice! It is recommended to iron shirts starting from the collar, moving from it to the sleeves.

Delicate items are placed in special bags

Unusual ways

In addition to the usual method of folding things, there are also non-standard ways - convenient and fast, not requiring special skills.

5 ways to quickly remove unpleasant smell from carpet

Mechanical shirt folder

Not everyone can remove wardrobe items in the same way as store clerks. That's why a mechanical folder comes to the rescue. This device will fold any wardrobe item quickly and efficiently. They fold T-shirts, sweaters and even trousers. Advantages of this device:

Folds any clothes in a few seconds.
There are no dents after folding.
All items folded are the same size.

Using the folder is easy: lay the product face down on the device, first bend the sides, then fold the product in half.

This device can be bought in a store or made independently. Folding using cardboard

Assembling a blouse using cardboard is convenient for traveling. The cardboard will not wrinkle and will retain its shape. Fasten all buttons. Place the product with its back facing up, place a cardboard rectangle on top so that the paper line is in contact with the collar line. Bend the side part to the middle of the shoulder. Next, fold the sleeve. Do the same with the other side. Next, fold the bottom twice.

Rules for storing shirts

If the size of the dressing room allows, it is best to hang shirts inside the closet on hangers, with each item given a separate place. You can save space using the traditional installation method. The shirt is laid out on a flat surface with the back facing up. The sleeves are folded parallel to the rest of the item. The product is rolled up on the sides and folded in half. Wrinkles may form that need to be carefully straightened out with your hands.

How to beautifully wrap a shirt as a gift

Usually purchased products are already packaged in standard polyethylene. Such packaging can hardly be called beautiful, neat and festive. And if you wrap an expensive item in parchment, craft paper, burlap, linen or satin, you will get a very original gift for a loved one - a man.

You can pack a shirt in gift paper using the following algorithm:

Remove the product from a standard bag or polyethylene.
Roll the product using any of the listed methods, depending on the length of the sleeve.
Carefully place in a prepared gift bag or box.
Place parchment paper on top and tie the box with a satin ribbon.

Advice! You should not use bright colors (pink, purple) for packaging a men's shirt, as well as decorations in the form of beads, butterflies, flowers or ruffles.

A creative gift for a man should be tastefully packaged accordingly; a gift in the form of a shirt can be complemented with expensive alcohol, perfume or jewelry.

Stylish packaging options for a men's gift

How to fold a shirt in a suitcase

Storing clothes on shelves in a closet in a static state is much easier than transporting items from city to city. Those who frequently travel on business should learn some simple ways to fold office clothes into a suitcase or travel bag.

Method 1. Products made from delicate fabrics do not have to be folded using traditional methods - into squares or rectangles. Silk or cambric shirts can be simply rolled with a roller to prevent vertical and horizontal wrinkles.

Attention! Before rolling the item, you need to fasten all the buttons and straighten the resulting wrinkles. Do not roll the fabric too tightly, place the main material on the collar and put the shirt with the collar down inside the suitcase.

Method 2. You will need a sheet of thick cardboard. It can be cut from an appliance box. The rectangle should fit the width of the shirt. You need to roll using the same method as for long-sleeve products, just put the cardboard inside.

Instead of thick cardboard, you can take any thick magazine

What to do if clothes are wrinkled after transportation

It may happen that despite all your efforts and strict adherence to the rules when packing your suitcase, your shirt is still wrinkled. What to do if you don’t have the time or opportunity to iron a thing, but you need it? Restoring a decent appearance is not difficult at all.

Use the "steam" method. Turn on the hot water in the bathroom and close the door tightly. After the air temperature and humidity in the room rise, leave the shirt hanging on a hanger there for 15-20 minutes, and then wait for it to dry. Do not put the item on immediately after “steaming” the folds; wait a while, otherwise the item will wrinkle even more.

It should be noted that this method is effective in many cases, but there are exceptions. For example, some types of linen or cotton fabrics will become covered with even more folds from such exposure than were originally there. In this case, all you have to do is use an iron if your suit is wrinkled.

Useful tips

The most annoying thing is when a neatly packaged shirt after transportation still turns out to be wrinkled, and it needs to be put on urgently. You have to start ironing in a hurry, the result, of course, is not very ideal. Simple tips will help eliminate the likelihood of such an outcome to the maximum:

There is no need to turn the item inside out.
To avoid wrinkles, clothes should not be folded immediately after ironing. You need to wait 30 minutes and let the fabric cool. It is better to hang the product on hangers, be sure to fasten all the buttons.
When packing in a bag, you should put the item with the collar up in a pile or “jack”.
If you still have the factory cardboard from the packaging, you can use it to maintain the shape of the collar.
To beautifully package a shirt as a gift, you can wrap it in special soft paper. The advantage of such packaging is the preservation of its presentable appearance.
To prevent shirts from getting wrinkled in your suitcase, you should not place heavy objects on top.
It is advisable to transport wrinkled clothes in a special case, then they will definitely not lose their presentable appearance. Of course, transporting it on public transport is problematic.

If the shirt is wrinkled, it can be treated with a steam generator or ironed. If it is not possible to use these devices, it is enough to hang the product on hangers over a basin of hot water for half an hour. The creases will become less pronounced.

Use case for transportation

Do not fold immediately after ironing

When packing in a bag, you should fold shirts in a pile

How to fold things correctly using the “twisting” method

Sometimes it is much more convenient not to fold a shirt, but to roll it up. This method is often used by those who do not like or do not have the opportunity to take large bags or suitcases with them on a business trip or vacation. This method allows you to significantly save space in your luggage and fit more things into a small bag.

However, you should understand that not all clothes can be styled this way. This is acceptable for a polo shirt or silk, cambric or other delicate fabric, but you should not put a jacket in a suitcase this way.

Simple folding methods for different shirt models

If a product of any style is properly laid out and regardless of its further location, even after a long period of time it will remain neat. How to fold a shirt depends on the model. You'll have to spend the longest time fiddling with long sleeves. But it is quite possible to avoid the appearance of creases and bends in the fabric; the main thing is to take into account some nuances.

With long sleeve

In the process of performing all manipulations, close attention should be paid to the cuffs, they are the ones that wrinkle most often. First, the clothes should be placed on a hard, flat surface - a table will do just fine. The back should be up. The item will need to be leveled, smoothing out the wrinkles. Both halves should be located symmetrically to each other, then there will be no problems. There are several methods for folding long sleeve shirts. The most popular involves the following actions:

Visually divide the back into 3 zones. The borders of the sides should be in the center of the shoulder. At this point, bend the side part. Carefully smooth out the fabric.
Holding the product by the shoulder area, fold the sleeve along the folded side part, that is, lay it parallel.
Perform similar manipulations on the second side - the sleeves will be parallel to each other, forming a rectangle.
Fold the bottom in approximately 10 cm.
Then wrap it again so that the lower part is near the collar.
Turn the shirt right side out. The result is a product neatly folded into a square.

The second method, which explains how to fold a men's shirt, is more complicated, but the execution scheme is similar:

The back should be roughly divided into 3 parts.
Bend the side back and smooth out all the folds with your palm.
Straighten the sleeve, the angle between it and the back should be 90˚. Then visually divide it into 3 parts. Roll up, starting from the armpits, 3 times. The sleeve parts should be stacked on top of each other, with the cuff on top.
Do the same with the second sleeve.
As in the first method, alternately fold the bottom 2 times.

To prevent the products from becoming wrinkled, you should not make excessive efforts to straighten the folds several times - this way, on the contrary, all the lines will be clearly visible.

Another folding method consists of the following steps:

Place the product with its back facing up and level it out.
Fold the right sleeve back. The side of the product must be smooth.
Holding the sleeve at the top, lay it parallel to the edge.
Do the same with the left sleeve.
Fold the shirt in half.

Success largely depends on the ability to correctly estimate distance by eye. If difficulties arise, it is better to take a measuring tape.

Method No. 1

Method No. 2

Method No. 3

Short-sleeve

The process is a little easier and faster, especially when compared with the schemes already discussed, since there is no need to think about the condition of the cuffs. A short-sleeved shirt is correctly folded like this:

Place on a hard surface and straighten out all its elements.
Fold the bottom 10 cm, approximately this is the part that is tucked into the pants.
Visually divide the back lengthwise into 3 zones. Fold in the left side along with the sleeve.
Repeat all steps for the right side. In this case, the edge of the sleeve on the left side will also turn up. It is important to ensure that the lines remain straight and without creases.
Fold the right side sleeve parallel to the edge of the product.
Fold the shirt in half. The folded item immediately fits into the suitcase.

Once you figure out how to carefully fold shirts using this method, you will be able to use similar algorithms without any problems. According to the second method, you need to start with the sides and sleeves, without touching the lower area. After you get a rectangle, you need to fold the shirt in three.

The third method is also easy. Even a beginner can understand how to fold shirts correctly:

Straighten the product.
Fold the left sleeve so that the edge of the shirt is even. Visually draw a line along the product (start near the collar). Fold in the left side.
Do the same with the right sleeve, and then with the side part.
Fold the product in half.

There are also other, more complex methods of folding a shirt so that it does not wrinkle in a bag, which ensure that the product looks flawless even after being transported in a cramped suitcase.

Method No. 1

Method No. 2

Method No. 3

Features of transportation in a suitcase

For travel, shirts are folded in a similar way. But in this case, it is important to pack the shirt correctly in a suitcase, bag or backpack. Before collecting things, they are ironed and the fabric is allowed to cool. Clothes are folded. (To secure shirts, it is good to use collar and cuff holders). And then they put it in the bag in layers according to the following scheme:

bottom layer - here are the least wrinkled items and items folded with a roller (T-shirts, T-shirts, underwear);
middle layer - followed by clothes made of thick (trouser, suit) fabric;
the top layer is the place for shirts, which should be laid with the collars facing up, and covered with a soft scarf or light scarf on top.

Some housewives recommend another way to put a shirt in a suitcase so as not to wrinkle: additionally roll the items into rolls. In this case, the collars should be on top. In a bag, it is better to separate the layers from each other with cardboard, or you can use magazines or books that you plan to take with you.

When you need to look brand new upon arrival

If you often go on business trips, be sure to purchase a special bag for transporting shirts (sport bag). This device practically guarantees that upon arriving at your destination, you can immediately put on the ironed product and go to a business meeting in it.

The most convenient way to transport shirts is in a special bag - a briefcase

A bag for transporting shirts can be found on sale in specialized stores, or ordered online.

A few tips to make folding a long-sleeved shirt easier

Before folding a shirt, it is useful to know a few simple and effective tricks:

Do not fold a textile item immediately after ironing it. The shirt should be hung on hangers and, fastened with the top button, the fabric should be allowed to cool. Otherwise, the product will be wrinkled. Let the shirt hang for half an hour;
if you have to iron several shirts , then first you should iron them all, and only after that start folding. This way the process will go faster;
To prevent a folded shirt from becoming skewed , you need to observe parallel lines and avoid narrowing downward;
When folding, cardboard is placed inside the shirt , as is done in industrial packaging. To do this, cut out a rectangle of the appropriate size from cardboard and place it on the back of the shirt before laying it. Thanks to the liner, the product will retain its correct shape longer.
Before putting them in your luggage, expensive shortbreads should be carefully wrapped in thin, soft paper. The paper will protect the fabric from dirt;
for frequent trips it is better to purchase a backpack . It is a specialized bag in which you can transport suits and shirts.

For those who were familiar with geometry at school, learning to fold shirts is easy, because this process requires the mental ability to divide a plane into several parts.

Several life hacks for folding

To avoid wrinkles on your shirt, you can use one of three folding options:

using a special mechanical device;
by preserving the substrate;
rolling the thing into a roll.

There is fabric that wrinkles a lot, the last method is not suitable. You need to use other options for how to fold a shirt. If you put shirts in a closet, they should be placed in an even stack, and the collars on the items should be in a “jack”. Then the shirt will be perfectly ironed at any time.

Special mechanical device

Recently, mechanical means for folding any items have become especially popular: shirts, T-shirts, trousers, sweaters. Using the device has a number of advantages:

time is saved significantly;
there are no wrinkles on clothes;
things in a stack are the same size.

To fold the product, you need to place it face down on the device and bend it to the middle of the side. After this, you need to fold the item in half.

Preserving the substrate

Using a cardboard backing, you can easily pack the shirt as a gift. You can even give such a thing without a box, wrapping the shirt in a beautiful fabric.

Folding is done on a sheet of cardboard, the width of which is equal to the width of the product, and the length is equal to a third of the length. After choosing a suitable sheet, you need to fold it in half and crease the middle well. The cardboard is located on the back. The top of the sheet should be near the collar. Then you can choose any of the folding options considered.

Other

If you need to take a lot of things on the road, you can use the roll-up option. It will help you arrange products and generally get ready quickly. The process includes three stages:

Place the product face down.
Fold the right sleeve up to the shoulder so that the edge is vertical. Do the same with the left sleeve.
Roll the item starting from the bottom.

Important. Do not press too hard on the folds, otherwise creases may appear. The folded shirt is placed with the collar facing up.

It is impossible to look presentable in wrinkled clothes. The person immediately seems sloppy. If for a number of reasons it is not possible to iron the shirt and immediately hang it on hangers, you can choose one of the ways to fold the shirt to keep it in perfect shape.

Rate this post

Special insert

Most people traveling around the world take with them things they need in another city or country. Now many devices have been invented to help tourists and frequently traveling workers. One of them is shown in this photo. This is a special case for people who care about how to fold their shirt without wrinkles.

It has a dense base and Velcro-fastened sides. There are options with a zipper fastener. The size corresponds to the folded products (according to the diagram presented above). Men's or women's shirts are laid out and buttoned in the compartment. After this, you can put the device on top of your things in your suitcase.