"Silit Beng" for plaque and rust: reviews, pros and cons of the product

There should be order in the kitchen and bathroom. Many housewives spend time choosing a truly effective product that will help achieve the desired results. Modern manufacturers praise their products; often the advertising is so intrusive that it can be very difficult to determine how effective a particular drug will be. Comments from consumers who have already tried it will come to the rescue. We invite you to read reviews of Silit Beng for plaque and rust.

Description

The motto of the manufacturing company is the phrase “And the dirt is gone”; it is under this slogan that cleaning products for the bathroom, toilet and kitchen are produced. Among the most popular products is Silit Beng for plaque and rust, a cleaning product that the company promises will cope with the following types of stains:

rust;
limescale;
fat;
soap stains.

It is a clear liquid with a characteristic “chemical” smell. The composition of Silit Beng against plaque and rust is as follows:

oxalic acid, widely known as an effective rust remover;
surfactants;
flavorings.

The acid is contained in an amount of less than 5%; the manufacturer did not provide more precise information.

Consumer Opinion

Reviews of Silit Beng for plaque and rust are mostly positive. Consumers note that, in general, the advertising does not lie, the product really helps to clean the plumbing, even in cases where this has not been done for a long time, and the dirt has become ingrained. “Silit Beng” acts very quickly, the packaging indicates that for it to work it should be left on the surface for 1-5 minutes, in practice users wait the maximum period - all of 5 minutes. Also, the advantages of the product include economical consumption. Consumers indicate that the use of the product does not harm plumbing, provided that all rules are followed. It is very easy to use, you just need to wipe the surface with a sponge without any extra effort, which many users also liked.

Housewives who have already tried Silit Beng note that it removes soap and limescale deposits from plumbing fixtures very well and destroys rust quite well. This product will be especially useful in regions where the water quality is poor and after a short time leaves ugly marks and stains on new sinks and toilets. Users advise not to start the problem, to clean without waiting for the stain to become old, otherwise the surface will have to be treated several times to achieve a good result.

Cillit Bang Black Mold Repellent

A few years ago we changed our apartment. Partial renovations had to be done, but the bathroom was almost ready for use. We did not dismantle the tightly built-in old cast-iron bathtub, change the toilet and tiles, we only had to change the faucets, install a sink, mirror, lamp and washing machine.

Of course, I washed and disinfected everything. Large tiles in pastel colors gleamed comfortably. But I couldn't get rid of the black color in the tile joints. I used both acidic cleaners and regular bleach, but the black streaks only became thinner and paler. The coveted whiteness was far away. And it was scary - how dangerous is this mold? There are similar modifications from relatively harmless to highly toxic.

One day a friend came to visit us. He did everything at home himself and appreciated the quality of the tiles laid. But when I asked how to get rid of the blackness, he only joked that he used an angle grinder. I was even about to follow his advice, mentally imagining how I was running a circle rotating with a squeal, scattering grout crumbs around me, and underneath it the coveted white color. The thought grew and rushed around the skull - where can I get an angle grinder? Should I buy it or go ask Petrovich on the first floor? And then buy new grout? Maybe not white, but walnut?

And then I saw that my friend was laughing openly and saying that there was no way I could get rid of the black stripes and I would have to come to terms with it.

The children brought stickers with African inhabitants: they stuck them on the cabinet, on the mirror, on the tiles. The animals seemed to live in a cage.

I either didn’t think of reading the Internet or didn’t find anything useful. But one day in the supermarket I was choosing cleaning products and saw it - it protects against black mold. It immediately came complete with a sprayer. Not really believing in the effect, I bought it and waited until no one was home for at least five hours. Now I would have put on a respirator, but then I only thought of turning on the hood and pulling on my gloves, and methodically covered all the horizontals and parallels. The smell was pungent. It smells like a freshly cleaned surgical operating room, only stronger.

According to the instructions, it was necessary to wash it off after five minutes, but I was skeptical, so I left it for about twenty minutes. And when I returned, I was delighted to see that all the seams, as if by magic, had turned white, except for one small area at the very top. This little strip about ten centimeters reminded me of how terrible it once was. I wiped with a clean rag wherever we might touch, but at the top, contrary to the instructions, I left it as is. This is not a problem for tiles. But it’s better, of course, to wash it off plastic, rubber, and wood; it’s a very aggressive product.

I ventilated for half a day in a draft and with the hood on. When the soya family gathered in the evening, there was very little smell left. But everyone was pleasantly surprised by the changes.

Several years have passed already. Black stripes appeared in one very damp corner, and the rest of the bathroom still had white seams. I decided not to wait for distribution and yesterday I bought a familiar product again. I'll have to use just a little bit, but it has a shelf life of two years and won't go to waste. If black mold has come to you, now you know how to fight it. The main thing is not to start simultaneously washing the toilet and sink with chlorine-containing products, otherwise yellow-green poisonous chlorine of high toxicity may be released.

Advantages

In reviews of “Silit Beng” against plaque and rust, consumers indicate the following advantages of the product:

Easy to use bottle. Thanks to the trigger sprayer, you can use the drug easily and economically.
Product versatility. It can be used on almost any surface.
It really cleanses most contaminants and even copes with old neglected cases.
Can be used to clean tiles, glass, plastic and porcelain.
Fast speed of impact. It is enough to apply the product for 5 minutes, then rinse with a simple sponge.
Buying the product is easy: it is available in most stores and hypermarkets.

All this has made the product a popular means of giving plumbing fixtures a mirror shine and reliably removing dirt.

Flaws

Reviews of the product “Silit Beng” against plaque and rust help to identify a number of shortcomings of the product:

Quite a high price. In stores, the average cost of a 450 ml bottle ranges from 250 to 300 rubles.
It is necessary to work with gloves. If this is not done, there is a risk of not only damaging the manicure, but also irritating the skin of your hands, since the composition contains oxalic acid.
Due to the acid content, it has a sharp, unpleasant odor.
The product cannot be used on brass, copper, marble surfaces, or galvanized metal.

At the same time, some users in reviews of Silit Beng for plaque and rust indicate that the drug turned out to be completely useless and did not fulfill its purpose. However, such negative characteristics are rare. As a rule, the product solves the tasks assigned to it: it not only cleans the surface, but also gives it a beautiful mirror shine.

How to use

Many people who want to make their plumbing fixtures shiny quickly and without unnecessary problems use Silit Beng to remove plaque and rust. Photos of this product are presented above. On each package, the manufacturer indicated information on how the composition should be used, so there will be no problems. First, you need to wipe the contaminated surface with a slightly damp sponge, then apply the product (this is quite easy to do thanks to a special trigger sprayer). Now all you have to do is wait 5 minutes and wipe the surface with a damp sponge.

Description and recommendations for use

Each product from the Cillit Bang line has its own purpose and requires compliance with certain instructions.

How to clean polyurethane foam from clothes and various hard surfaces? We have the answer!
Read about what you can use to clean silver at home and how to do it at this address.

Cillit Bang against plaque and rust

Eliminates limescale and rusty marks without leaving streaks behind. Apply the composition directly to the stained area or with a sponge. Wipe the surface and rinse with clean water after 2-5 minutes.

READ ALSO: Effective means for removing and preventing the appearance of scale in a washing machine, features of their use

Anti-plaque + Shine

Helps cope with soap stains, rust, and plaque within a few seconds. Used for ceramics, stainless steel, chrome surfaces. Do not apply to marble, brass, copper, aluminum, rubber, wood. The bottle has a trigger sprayer, which allows you to save product consumption during application.

Instructions for use:

turn the sprayer to the “on” position;
try the product on an inconspicuous area;
apply to dirty surfaces;
do not use for more than 5 minutes;
rinse with water.

A bottle will cost an average of 300 rubles.

Active bath foam

Innovation for quick cleaning of surfaces. Thanks to the sprayer, you can perfectly cover contaminated areas with just one application. The foam penetrates and dissolves dirt, leaving behind a radiant shine. Ideally cleans shower stalls, ceramic tiles, acrylic bathtubs, chrome and steel surfaces.

Black mold remedy

The Cillit Bang formula with chlorine helps to effectively destroy fungi and mold. A special sprayer provides wide coverage of affected surfaces, penetrating into hard-to-reach places.

Hold the bottle vertically at a distance of 10-15 cm from the surface. Spray Silit Beng against black mold and leave for 15 minutes. Wipe the surface with a clean sponge and rinse with water. The product must not be used simultaneously with other substances containing chlorine and its derivatives. Also not recommended for use on surfaces sensitive to acids.

Sillit Beng anti-fat

Copes with old traces of grease on dishes and kitchen surfaces, and oil stains. This product can also be used to remove dirt from surfaces made of natural stone and marble. Do not use the composition on wooden surfaces, and do not apply it to hot objects. You need to let them cool.

Turn the sprayer to the ON position. Test the effect of the product on an inconspicuous area. Apply the required amount to contaminated areas. Keep the bottle vertically at a distance of 20 cm. Leave for the composition to take effect and dissolve the fat for no more than half an hour. Wipe with water. Avoid getting Cillit Bang in your eyes. If accidentally swallowed, seek immediate medical attention. The price of a 750 ml bottle is about 300 rubles.

Restrictions

It is very important not to leave “Silit Beng” against plaque and rust, reviews of which we are currently reviewing, for more than 5 minutes, otherwise the substances contained in the composition may damage the surface. The manufacturer advises first of all to try the drug on an inconspicuous area, and only then use it on visible places.

So, reviews of “Silit Beng” for plaque and rust make it possible to make sure that the advertising does not lie, the drug really does everything that the manufacturer promises and effectively combats the identified problems. Despite the identified shortcomings, we can conclude that the product is highly effective.

How are stains removed?

How does Silit Beng work against plaque and rust? Reviews say that the product removes lime very effectively, eating into its structure from the inside. At the same time, it is converted into a soluble form. Buyers note the fact that Silit Beng has one small drawback - it does not contain abrasives. However, this problem can be easily eliminated by using a stiff bristled sponge or adding baking soda to the stain.

As mentioned above, the product can perfectly break down soft carbon deposits. The detergent components included in Silit Beng help loosen the structure of the stain and make cleaning easier. That is, the longer the product is in contact with the dirt, the easier it will be to wipe it off. The absence of abrasives requires high-quality mechanical cleaning, which depends on the choice of sponge. It's best to stick with a hard-coated sponge, unless you're afraid of scratches, of course.

For hard carbon deposits, the product does not pose any danger. The drug is not introduced into its structure during the cleaning process, even if you soak the stain for a long time.

Silit Beng also removes rust. True, “fresh” is best. Old rust will have to be soaked and rubbed harder when cleaning. The most important thing is that the product does not scratch the surface when applied. And this distinguishes it favorably from all kinds of liquid and powder abrasive cleaning products.