How to smooth a mink coat at home

Mink products are very practical to wear, but unforeseen troubles happen that can harm their appearance. To prevent this from happening, you need to know some tricks for caring for such clothes. Let's talk about how to smooth out a mink coat if your favorite fur beauty is wrinkled.

How to iron a fur coat?

Is it possible to iron fur with an iron?

You cannot straighten a natural mink coat with an iron along the outside. This will dry out the villi and cause irreparable harm to the quality of the fur. The caked product is smoothed along the wrong side from the center to the sides. A thin cotton rag is used between the iron and the lining.

You cannot put pressure on the device, the steam is turned off, the ironing temperature is low and set to o. Movements are smooth and careful. The direction of movement is along the pile.

Before ironing, test the iron on an inconspicuous area of the coat. If the fur does not look “chewed” or wrinkled after ironing, the result is satisfactory, then you can begin to straighten the entire surface of the fur coat.

Why did the fur coat become hard?

The flesh is the other side of the skin. If it gets wet through, it will become very stiff and inelastic. When crumpled or rolled, the inner core may crack. Then a fur coat

will lose all its presentation.

Interesting materials:

Where is the best place to stay in Crimea? Where is the best place to relax in Turkey in early October? Where is it better to relax in Adler or Sochi? Where is the best place to relax in Crimea in March? Where is the best place to plant tulips in the fall? Where is the best place to place heating radiators? Where is the best place to plant sakura? Where is the best place to place tulips? Where is the best place for video calling? Where is the best place to dig for scrap metal?

Using a steamer

Bruised fur is restored from exposure to steam. The steaming procedure is carried out according to the following algorithm:

Select a hanger by size.
The item must be clean. The presence of dirty stains is removed with a soft brush so that it does not stick.
Fill the steamer with clean filtered water.
Test the device by releasing a stream of steam to the side. A uniform string should fall on the fur coat without splashing.
To prepare, hold the equipment at a distance of 20-25 cm from the item, direction along the pile. This will prevent the fur from burning. Duration 3-5 minutes.
The main procedure is carried out from a distance of 15 cm and lasts 20 minutes. Process the entire coat from the collar, hood and sleeves to the front and back.
Shake your favorite and place on hangers to dry.

While drying, do not turn on heaters, hair dryers, or radiators nearby.

How to tidy up faux fur?

More and more fashionistas prefer to buy faux fur outerwear. Manufacturers have learned to make good quality fur coats and hats from such fur that sometimes you can’t even distinguish it from natural fur. And the price for such products is low. In addition, faux fur is durable, strong and wear-resistant. This fur is easy to care for, does not require maintenance of cleanliness, any special operating rules and is not at all afraid of moths. Today you can buy faux fur in stores that specialize in selling sewing accessories.

If you already have items made from faux fur in your wardrobe and you need to put them in order, then first you need to read the manufacturer’s recommendations, which are always indicated on the label. If a product has a pattern applied to it, it is better to dry-clean it. At home, faux fur can be cleaned in a washing machine or by hand. So, it is advisable to wash fur in a machine if there is heavy contamination. For such purposes, it is advisable to use a machine with vertical loading. You need to use a delicate mode. And of course you can’t wash the product at a very high water temperature if you don’t want to be left without a fur coat (photo 1).

You can also wash the product by hand. To do this, soak it in warm water. Add soapy water or mild detergent. Then wait thirty minutes and brush it with a soft brush in the direction of the nap. After this, the fur is washed with warm water and then cold. You can add a couple of tablespoons of vinegar to cold water. Then the fur coat will shine after washing (photo 2).

Labels can add originality to outerwear. Some stores that specialize in selling sewing accessories offer the service of making labels for clothing. Use this service and your clothes will be beautiful and original.

Remember, you cannot dry fur items in a centrifuge or automatic machine. After washing, the products are either placed on towels or hung on a room dryer. In this case, the product does not twist. It needs to be wrapped in a towel and easily wrung out. You should also not place fur on heating devices, such as a radiator. Otherwise the fur will become deformed. Also remember that during drying such a fur coat should lie flat. You need to comb the fur carefully, in the right direction (photo 3).

If a greasy stain appears on the fur, it can be removed with purified gasoline. Take a handkerchief and dip its edges into the liquid. Then you need to treat the stain with a scarf. Repeat the procedure 3-4 times. After this, the area of contamination is wiped with a damp cloth. You can also mix gasoline with potato flour. You should get a thick paste. Apply the mixture to the stain. When the gasoline has evaporated, apply heated starch to the stain. If the item is made of white fur and has turned yellow over time, then do not rush to get rid of it. Take hydrogen peroxide (one tablespoon) and dilute it in a liter of water. Wash your fur in this solution. It is advisable to treat the fur with a brush. After cleaning, the product must be dried (photo 4).

Sometimes, to put the product in order, you need to buy roll glue. It is very easy to find it on sale. Starch will help get rid of yellow stains on a fur product. It needs to be rubbed into the pile and rubbed. Remove residues with a brush. To ensure that your product always looks good, follow some rules. Hang your fur coat in the closet on hangers. At the same time, the closet should be clean and dry. Before the start of the season, use a bamboo cane to remove dust from the fur coat. To do this, the product must be placed on a sheet (photo 5).

Moisturizing fur

A moisturizing procedure will help straighten your crumpled mink:

Hang the product on hangers.
Fill the bathtub with hot water.
The fur coat itself cannot be wet.
Leave for 1-2 hours in a room with moist hot air.
Take the hanger out into a spacious room to let it hang and dry.
Comb the pile, pointing it in the right direction.

The mouton outfit must not be moistened or steamed. This procedure will damage the product irrevocably. Mouton is straightened sheep fur, and when the humidity is high it curls. And takes on an unpresentable appearance.

How to hem a fur coat correctly?

Shortening a fur coat with your own hands is very simple. You don't need any special skills to cope with this task. If you are worried that you might ruin your fur coat, contact the studio.

How to hem a fur coat at home?

Using pins, make a fitting and make marks in the right places. Pre-fasten the product with all buttons. Measure the distance between the edge of the fur coat and the fold of the new length.
Open the lining. Measure an equal distance from the edge, draw a bottom line using chalk. Draw an allowance line at a distance of 3-4 cm. Cut it with a sharp knife. Move in small jerks, from left to right. Do not cut the fur with scissors - the edge will be sloppy. In addition, this will lead to shedding of a large amount of fur.
Fold the seam allowance with a special needle for fur and leather. Sew across the edge, following the chalk mark. Place the product on the table and start working, moving towards the right side. As soon as there is approximately 10 cm left, fasten the product with all the hooks, and fold the floors together. If necessary, adjust the allowance and finish processing.
Cut the lining and pin it to the center of the seam allowance, leaving a little space. Try it on, which will help you understand whether the lining protrudes beyond the edges of the fur coat.
Sew on the lining. Place the product on the table, place the bottom in the crook of your palm, push the fur away with a needle, and hold it with your fingers. Moving from right to left, grab 0.8 cm of fur and lining and sew them together. Do not tighten the thread too much so as not to damage the product.
Gently straighten the fur that has gotten inside with a needle. The seam made should not be visible.

The process of shortening a fur coat is simple, but it requires care and perseverance. However, there is a nice bonus here - you will save money, which you can use to buy a beautiful accessory or decoration for your favorite fur coat.

Fur coats

White mink coat: where to buy and how much does it cost?
Many women want to buy a white mink coat. This outfit is definitely impressive...
Where to buy a lynx fur coat?
Reviews and prices Lynx fur is a rare and very expensive material. It has a special color. Most appreciated...
Choosing a cross-cut fur coat with a hood
Any woman dreams of a beautiful and luxurious mink fur coat. However, choosing it is not so easy, because...
Where to buy a stylish fur coat at an attractive price?
This season, leading fur designers have released quite controversial…

Fashion

Is it possible to wear UGG boots and a fur coat?
Fur products on all female representatives should look luxurious and emphasize the tall…
What to wear with a nutria fur coat and what does it look like?
If you want to purchase a unique, warm and original fur coat, then stop your choice…
What to wear with a beaver coat and what does it look like?
Beaver fur was first processed during the reign of the first princes of Kievan Rus. Since then he...
Belt (belt) for a fur coat.
What should it be like? A fur coat in our area is not only an indicator of wealth and status, but also an undisputed leader...

Care

How to sew a vest from an old fur coat with your own hands?
A vest made of natural fur is a beautiful and stylish wardrobe item. Many people dream about it...
How to update an old fur coat and give it a new look?
Has your favorite fur coat lost its former appearance? Don't worry - she can be revived. Eat…
Why does a fur coat fray and tear?
The fur on a fur coat can fray and tear for various reasons. Villi may begin to fall out immediately after...
What to do if a seam on a fur coat comes apart?
A torn fur coat is always an unpleasant surprise for its owner. However, this defect can...

Smoothing with a brush

A high-quality brush is a mandatory attribute for the owner of fur models made from mink, arctic fox, fox, mouton, and nutria.

The mink accessory is made from:

metal;
wood;
plastics.

The coat is treated with similar brushes, visually transforming the condition of the fur and making it smooth, shiny, and fluffy. The main parameter for choosing an accessory is softness.

Step-by-step instruction:

Use a damp, colorless foam sponge to dampen the outfit.
Brush it with a soft brush.
Leave in a ventilated area.

How to remove creases

Creases and splits are bald spots that appear in places where the product is folded (hood, sleeves, collar).

The fight against them comes down to four methods:

Give the fur coat time. Place the fur coat on hangers and allow it to relax under its weight in a wide, ventilated room away from direct sunlight.
Dry cleaning. Do not clean the product with chemicals at home. Only professionals can help reduce creases.
Combing with a brush or damp sponge. Use a clean pet comb to comb the fur, moving the tool in different directions at the split site. Use a damp foam sponge to rub against the grain and then along the pile.
Steaming. The method deals with creases if they have a small area.

These instructions will help remove local defects. If the model is severely wrinkled along its entire length, then you need to contact the dry cleaner.

Two ways to smooth a fur coat

Steaming is a traditional method of ironing clothes without an iron. Before straightening the fur on your fur coat using hot steam, fill the bath with boiling water. Then carefully hang the product over the bathtub. It is important that the hem hangs at some distance from the water! After this, the product is hung in a dark room with good ventilation and left to dry at room temperature;
Take a damp sponge and run over the pile several times. Wet the fur thoroughly and then comb it with a wire comb or wide-toothed brush against the grain, and finally smooth the surface with your hands. As a result, the pile is smoothed out. After completing the procedures, shake the product and hang it to dry in a dark and well-ventilated room. When the fur coat is dry, beat out the clothes from the wrong side. This method is suitable if the fibers are slightly wrinkled after prolonged storage.

How to iron a mink hat

Hats need to be restored and straightened after the summer season. You can restore the original appearance of a mink hat using a steam generator:

exposure to steam for 15-20 seconds;
Shake the product forcefully so that the fibers lie flat;
hang for 30-40 minutes to let the pile dry.

A fluffy hat takes longer to process. If there is little fur on the headdress, a small exposure to steam is enough to return the product to its original appearance.

Steaming the cap with moist hot air from a kettle will give a good result. The lid of the boiled kettle is opened and the product is held over boiling water for 1-2 minutes. At the end, shake vigorously and leave for half an hour.

Experts recommend

Often fashionistas and fashionistas are faced with the problem of storing mink coats in the summer. If you do not follow the basic recommendations of experts in this matter and neglect simple rules, at the beginning of winter a fur coat with a hood will not look beautiful. It may wrinkle and completely stop holding its shape.

This is far from a disaster, because there are at least two ways to return your beauty to its original appearance.

Fur care after ironing

After ironing, the fur is dry and requires care and proper use. Fur models are stored on a hanger with wide shoulders in a natural cotton or linen case. Storage in cellophane and next to synthetic items is unacceptable. Exposure to direct sunlight will cause the fur to yellow. The ideal place for storage is a refrigerator with a set temperature and humidity.

If the coat is stored at home, ensure the following conditions:

You cannot put it in a box or on a closet shelf, the pile will bend, creases and folds will appear;
Before packing in a case, the fur coat is checked for dirt and stains, the lock on the case is closed with care so as not to pinch the sleeve or hood;
linen bags with dried citrus peels are placed in the pockets to protect against moths;
once every 30-40 days, the fur pet is taken out, shaken, ventilated in a spacious room or outside;
prevent the ingress of moisture and water droplets;
After going outside, the fur coat is dried naturally from wet snow and rain, after smoothing the fibers with a sponge or brush.

Take proper care of your fur item and it will last a long time.

Storage conditions

Fur clothing can be stored in special refrigerators under the supervision of specialists. They look after the thing, clean, restore, comb and protect it from the malicious pest of fur - moths;
You can create ideal conditions for storing your fur coat at home. To do this, you just need to find a dark and cool place for it so that the pile does not fade and the core does not lose its elasticity;
A mink coat should be stored in a fabric case, hanging it on wide hangers;
Place any pest control product in the pockets of your fur product;
Also, there should be a substance in the cabinet that can eliminate moisture;
Before putting your favorite fur coat in the closet, carefully inspect it and clean it of dust and dirt;
When going out in a mink coat, do not hang the bag over your shoulder: it will rub the bald spots on the fur;
Do not attach various accessories to expensive fur, which can tear the mink skins;
Be sure to wear a shawl or scarf under your collar. In this way, you can protect the mink from contamination;
Do not allow any cosmetics to come into contact with the fur; they may damage the fur;
Periodically you need to clean the fur coat from dirt using a special brush.

As a result of weather conditions, any owner of a beautiful mink coat may accidentally find herself in the rain. In this case, experts advise leaving this expensive item to professionals rather than experimenting with mink at home.

It is better to take the fur coat to a specialized dry cleaner, which can restore the fur product to its proper form and return it to its former beauty and shine. There are already many similar establishments in big cities. Professionals with special education work there. In addition, they have accumulated significant experience in restoring fur clothing after similar consequences. Employees of these enterprises are able to choose the right method for restoring your fur coat.