How to straighten faux fur on a hood?

Nothing spoils a fur coat more than folds and creases. Crumpled fur hats and vests look no less deplorable. But don’t rush to get upset! Right now you will learn how to steam a fur coat, no matter how fantastic it may sound at first glance. Do not iron! Namely, steaming. It is absolutely forbidden to iron fur, even if you really want to. And steam is harmless to fur. The leather fabric will absorb moisture and straighten right before your eyes.

Is it possible to steam a fur coat made from a mouton?

Of all the types of fur, Mouton was the most unlucky. It cannot be ironed, and steaming is strictly prohibited. And why? Because mouton is straightened sheep fur. And the sheep, as you know, is lush and curly. What happens to straightened hair in humid weather? That's right - they begin to curl again. The same thing will happen with a mouton fur coat (or hat) after steaming. Therefore, here you have to choose: either you will wear a mouton fur coat, or a curly one.

What to do with the mouton?

There is only one way to smooth out wrinkles on a mouton fur coat - hang it on hangers and comb it against the direction of the pile. You can take a special comb or any other, the mouton is not picky. By the way, the same method can help other types of fur if the thought of steaming makes you feel bad.

Professional secret

More than anything else, any fur loves frost. The frost makes it look prettier and smoother. Frost for fur is like a spa for a woman. Therefore, one way to remove wrinkles from a fur coat is to simply walk in it in cold weather. But this doesn’t mean that you have to walk until you’re blue in the face at -30.

How to steam fur

The choice of technology that can be used to do this is now huge, choose any:

· Banal iron with vertical steam function

Steamer

Steam brush

Steam generator

How to steam fur

The procedure is as follows:

1. Hang your fur coat on comfortable wide hangers that fit it in size.

2. Check for dirt. If there is any, remove it, otherwise the dirt, after steaming, will eat into the fur even more.

3. Fill the iron (or any other steamer) with clean filtered water. And the fur coat will thank you, and so will the technology.

4. Before you start steaming, wait until a uniform stream of steam comes out of the steamer. Drops and splashes are of no use to a fur coat! Minimum - the fur coat will be surprised and get wet, maximum - the fur will deteriorate.

5. Start steaming at a distance of approximately 20 cm and preferably in the direction of the pile. Do a little magic in this mode, let the fur warm up and prepare for the main part of your performance. This is all for his benefit, otherwise you can burn the skin tissue. And wearing a fur coat with a burn will definitely not make you any more beautiful. Therefore, do not rush things, 20 cm and no, no!

6. Has your fur coat warmed up? Now you can bring the steamer closer. About 15 cm is your goal.

7. And the final touch. After steaming, shake the fur coat and hang it on wide hangers, away from other things. Let it dry and straighten out completely. Thus, we bring the matter to an end and consolidate the result.

While the fur coat is drying and recovering, there should under no circumstances be any heating or heating devices near it. And, God forbid, hang it on the radiator to dry. You can’t even make fun of socks like that.

The whole process takes on average 15-20 minutes.

If you are not satisfied with the result, repeat the procedure again.

Steaming sequence

Traditionally, the sequence is as follows: first, small parts are steamed (collar, sleeves, hood), then everything else.

What to do if you decide to steam your fur coat, but the creases won’t straighten out

This happens if the creases are very strong. You can help your fur coat with a comb. Steam and comb it at the same time. If you comb against the direction of the pile, the fur coat will become fuller; in the direction, the pile will even out.

Important!

Don't over-wet the fur! If you overdid it with the steamer, then finally calm down and drink coffee. Let the fur coat rest and dry.

That's all! As you can see, steaming a fur coat is a simple matter of minutes. But, in order to save yourself these 20 minutes and never resort to steaming again, do not store your fur coat in the closet, where, in order to get this fur coat, you have to rest your feet and pull it with all your might. Fur loves space and air. And the SPA, of course. Don't forget about the frosts!

More and more fashionistas prefer to buy faux fur outerwear. Manufacturers have learned to make good quality fur coats and hats from such fur that sometimes you can’t even distinguish it from natural fur. And the price for such products is low. In addition, faux fur is durable, strong and wear-resistant. This fur is easy to care for, does not require maintenance of cleanliness, any special operating rules and is not at all afraid of moths. Today you can buy faux fur in stores that specialize in selling sewing accessories.

If you already have items made from faux fur in your wardrobe and you need to put them in order, then first you need to read the manufacturer’s recommendations, which are always indicated on the label. If a product has a pattern applied to it, it is better to dry-clean it. At home, faux fur can be cleaned in a washing machine or by hand. So, it is advisable to wash fur in a machine if there is heavy contamination. For such purposes, it is advisable to use a machine with vertical loading. You need to use a delicate mode. And of course you can’t wash the product at a very high water temperature if you don’t want to be left without a fur coat (photo 1).

You can also wash the product by hand. To do this, soak it in warm water. Add soapy water or mild detergent. Then wait thirty minutes and brush it with a soft brush in the direction of the nap. After this, the fur is washed with warm water and then cold. You can add a couple of tablespoons of vinegar to cold water. Then the fur coat will shine after washing (photo 2).

Labels can add originality to outerwear. Some stores that specialize in selling sewing accessories offer the service of making clothing labels. Use this service and your clothes will be beautiful and original.

Remember, you cannot dry fur items in a centrifuge or automatic machine. After washing, the products are either placed on towels or hung on a room dryer. In this case, the product does not twist. It needs to be wrapped in a towel and easily wrung out. You should also not place fur on heating devices, such as a radiator. Otherwise the fur will become deformed. Also remember that during drying such a fur coat should lie flat. You need to comb the fur carefully, in the right direction (photo 3).

If a greasy stain appears on the fur, it can be removed with purified gasoline. Take a handkerchief and dip its edges into the liquid. Then you need to treat the stain with a scarf. Repeat the procedure 3-4 times. After this, the area of contamination is wiped with a damp cloth. You can also mix gasoline with potato flour. You should get a thick paste. Apply the mixture to the stain. When the gasoline has evaporated, apply heated starch to the stain. If the item is made of white fur and has turned yellow over time, then do not rush to get rid of it. Take hydrogen peroxide (one tablespoon) and dilute it in a liter of water. Wash your fur in this solution. It is advisable to treat the fur with a brush. After cleaning, the product must be dried (photo 4).

Sometimes, to put the product in order, you need to buy roll glue. It is very easy to find it on sale. Starch will help get rid of yellow stains on a fur product. It needs to be rubbed into the pile and rubbed. Remove residues with a brush. To ensure that your product always looks good, follow some rules. Hang your fur coat in the closet on hangers. At the same time, the closet should be clean and dry. Before the start of the season, use a bamboo cane to remove dust from the fur coat. To do this, the product must be placed on a sheet (photo 5).

Today, faux fur is in quite high demand and even successfully competes with natural fur. Faux fur is inexpensive, yet it boasts good wear resistance, strength and durability. The favorite items of clothing of many women - fur coats - are made from faux fur; hats, soft toys, bedspreads, etc. are also made from it.

It is quite easy to care for, however, like any fabric of our clothing, it also requires compliance with certain rules of operation and maintenance of cleanliness. This material is not afraid of moths, it is resistant to frost and, do not forget, that you do not have to kill animals to produce it.

If you are the owner of a faux fur item, you should understand the care features so that your item retains its qualities for as long as possible and pleases you with its excellent appearance. We will talk about the nuances of cleaning and caring for a faux fur coat. Of course, you can also apply all our tips to other products made from this material.

How to quickly straighten fur?

The best ways to fluff up your fur

After long-term storage, take your fur coat out into the air and let it air for several days.
Natural fur
can be fluffed even at sub-zero temperatures. Take the fur coat out onto the balcony for a few hours. ...
You can also fluff it with a comb, combing in the direction of the pile.

Interesting materials:

What does the word harem mean in Russian? What does the word Harvard mean? What does the word howitzer mean? What does the word Geriatric mean? What does the word Gucci mean? What does the word government mean? What does the word cemetery mean? What does the word fist mean? What does the word peace mean in the novel War and Peace? What does the word mole mean in Russian?

Smoothing fur after long-term storage

If the item was stored neatly - hanging, in free space, it will not have to be ironed. When it has been crumpled and folded, creases form and the pile looks untidy.

To smooth out heavily wrinkled fur, follow the instructions:

Straighten the item in your hands and hang it on a hanger.
When there are no creases, after combing the item will again look neat.
If severe creases form, place the item in the bathroom, turn on the hot water and close the door. It is necessary to achieve steam accumulation. Leave the item for 10 minutes, then dry and comb.

You can perform the same procedure by hanging the fur over a pan of boiling water. If you have a steamer, you need to steam the back surface of the product, and comb the pile and fluff it up.

Important points before dry or wet cleaning

Before you clean or wash your faux fur, here are some things to consider:

care instructions on the product label;
hand washing at home is possible if the base of the clothing is synthetic;
After rinsing, do not wring out too much, use the most gentle detergents;
water temperature when washing is not higher than 40 degrees;
if there are inserts made of other materials on fur clothing, for example, leather, leatherette, suede or others, it is better to have the item dry-cleaned, or familiarize yourself with the conditions for cleaning inserted materials;
take into account that the fabric base is sometimes prone to shrinkage after washing;
pre-treat a small area on the wrong side to check the reaction of the material;
Drying after treatment should occur naturally, preferably in a sunny room, but not in direct sunlight. Acceleration of the drying process by various thermal devices is not recommended;
During drying, the pile must be laid in the correct direction, since in which position it dries, the way it will wear.

How to process manually?

Items with long synthetic pile are recommended to be washed by hand.

The procedure is as follows:

Clean the fur from dust.
Fill a basin with cool water and dilute the detergent in it until completely dissolved.
Soak the fur for 30 minutes. If there is contamination, rub it gently with a brush. The movements should be directed from the lining along the direction of the pile, as if combing it.
Change the water and rinse the product.
Fill the basin with water again and add fabric softener.
It would be good if it contained an antistatic agent. These can be products such as: Lenore for children, Synergetic, Ligva Soft, etc. Their average cost is 150-200 rubles per 1 liter.
Rinse the fur in the prepared solution. This procedure will give it softness and shine, and will get rid of static electricity.

After washing, the product is not wrung out or twisted. The water should drain from it on its own.

If light fur has acquired a yellow or grayish tint, it is recommended to treat it with hydrogen peroxide. Perform the procedure as follows:

How to return a fur coat to its original appearance?

Remove yellowness Water with peroxide (1 spoon per liter) will help protect white fur products from yellowing and loss of silkiness. A solution of water and alcohol or water and vinegar, mixed in equal parts, will return the pile to its former appearance.

Interesting materials:

Is it possible to change the years for calculating maternity benefits? Is it possible to take chondroprotectors for prevention? Is it possible to take metformin for prevention? Is it possible to dilute hair dye with water? Is it possible to return the state fee if the claim is left without consideration? Is it possible to call a doctor at home if the child does not have a temperature? Is it possible to put dishwashing gel in the dishwasher? Is it possible to freeze cabbage for borscht? Is it possible to freeze apples for the winter for compote? Is it possible to exercise when you are sick?

cleaning faux fur at home

The product should be hung on hangers and evenly sprinkled with semolina (sawdust). Then use a coarse long-haired brush to comb the dirt back out.
Pour a weak solution of detergent into a spray bottle, gently wet the fur coat and comb it out, then let it dry.
Lay out the fur coat on a white sheet and beat it out with a rolling pin. Then repeat the brushing procedure.
Apply the lemon water solution with a sponge, then comb with a wide-toothed comb.
Mix potato starch with detergent.
Use a rag soaked in gasoline.

Process Features

The next question that will puzzle the owner of synthetic outerwear is how to wash a faux fur coat. Fur outfits are tidied up both manually and in an automatic machine. The main thing to remember is some features of the products:

Washing in hot water will distort the fabric. The pile will become disheveled and lose its original shine.
Drying should be done away from heating appliances; warm air makes the pile brittle.
There is no need to repeatedly wash outerwear; it is better to partially clean it.
Washing powders are harmful to fluffy beauty - unnatural skins deteriorate from frequent exposure to foam detergents.
You cannot rub the material when washing - bald spots will appear.

If you are going to put your clothes in order yourself, remember that washing fur in regular powder is not permissible. Products for woolen materials will be more suitable. Suitable powders for delicate fabrics. It happens that you don’t have washing powder on hand, but you need to wash your fur coat urgently. How to wash artificial pile without special products? Instead of special liquid gel, use shampoo. Liquid soap is a good substitute for washing powder.

Material advantages

The main advantage of faux fur is the fact that no animals were harmed in its production. By choosing such material, you save lives, because many fur-bearing animals are on the verge of extinction. Also, faux fur is more durable, wear-resistant and practical. Caring for it is not difficult. Faux fur is not afraid of moths and other pests. It is frost-resistant and available for purchase at a reasonable price.

How to wear fur items without them losing their shape

There are no secrets to wearing fake fur. The main thing is to handle the item carefully and carefully and store it correctly. Be careful not to let rain or wet snow get on your item.

When you happen to get caught in heavy rain while wearing them, proceed as follows:

Upon returning home, remove the item and shake it well so that drops of water fall from the pile.
Hang the item on a hanger, the back of a chair or a clothes dryer.
Comb with light movements.
Dry naturally.

You cannot place the item on radiators, heaters, or use a hair dryer.

Take into account body parameters and lifestyle when choosing and wearing fur comfortably:

Items are purchased strictly by size. When it presses, it tightens around the buttons, it will become deformed and lose its appearance;
Do not carry bags and backpacks on your shoulder, this will protect the lint from abrasion and falling out;
In a fur coat made of artificial fur, attention is paid to the sleeves. Constant friction against the car's steering wheel and armrests provokes premature wear and tear. The sleeves become ugly.

Otherwise, proper care of the item outside of use guarantees a long service life.

What to do if chewing gum is stuck to the pile of a fur coat?

There is no need to try to scrape out the chewing gum, you will only pull out the villi, after which a bald spot will form on the fur coat, and the product will be completely ruined. Take ice from the refrigerator and put it in a plastic bag, then apply the ice to the gum for a while. Wait for it to harden when exposed to cold. You can easily remove hard chewing gum piece by piece without much difficulty. Remove any residue using a fine-toothed plastic comb.

How to properly store fur items after ironing

To make a faux fur item last longer, you need to store it according to the following rules:

Do not roll it up or put it crumpled in a cramped closet. Such material does not tolerate constraint and is easily deformed;
Carefully hang on hangers in the closet, leaving free space around;
Place moth repellent in a closet where it is permanently stored. This pest can easily ruin any item. The cabinet must be regularly ventilated and moths must not be allowed to breed;
Store items in clothing cases, do not use bags or plastic.

As an insect repellent, put dry citrus slices, scented soap in the cupboard, or buy repellents in tablets and plates.

If you store eco-fur carefully, it does not need ironing. Otherwise, you will have to spend time bringing it back to its original form. Often it is enough to lightly brush the surface and it will return to its original state. In advanced cases, you will need to steam and clean it. If this item is not properly cared for, it is not always possible to return it to its original condition. When severe contamination appears, it is better to contact a dry cleaner.

Cleaning white products and combating yellowness

White faux fur requires special care, as it gets dirty much faster than dark fur and, in addition, can lose its whiteness. To restore the original appearance of clothes with white fur and get rid of yellowness, there are several simple and effective ways.

Hydrogen peroxide

A hydrogen peroxide solution will help renew white faux fur. To prepare it, you need to dilute 1 tbsp. l. peroxide in 0.5 liters of water. After thoroughly shaking the mixture, you should treat the fur surface and hang the product to dry in a sunny place. After drying, it is recommended to comb the pile with a comb.

Soda and alcohol

Cleaning with baking soda
Alcohol can be used when cleaning white faux fur. First you need to prepare a solution consisting of 1 glass of warm water, 1 tbsp. l. tea soda and 1 tsp. alcohol Use a soft brush dipped in the solution to brush the fur, moving in the direction of the pile. Then, as after any cleaning, the product must be dried and the lint combed.

Read also: How to properly cook meat for soup

Semolina or starch

You can remove dirt and yellow spots from white fur using semolina or potato starch. To do this, the clothes must be laid out on a flat surface and thoroughly sprinkled with semolina or starch, then rub the powder into the fibers with a cloth napkin.

To free the fabric from the grain, the product must be vacuumed or beaten with a stick.

Technology to help

When asked whether faux fur can be washed in a washing machine, most manufacturers answer positively. The process should start with getting to know each other. Let's get acquainted with the manufacturer's wishes and test the fleecy fabric itself for possible flaws. The rule is - the shorter the comb, the better it tolerates machine washing.

When choosing a program for synthetic beauty, we opt for delicate washing. Liquid products must be used. Undissolved lumps of powder will ruin the paint. Before you see a fur coat in the washing machine, you should beat it well and clean it from adhering dirt. Next, turn the coat inside out. It's good if you have a calico bag. It is better to place outerwear in it and send it to the drum in a bag. This way the long pile will receive less damage.

You cannot wring out knitwear - the material will deform. To wash a fur coat in a washing machine without spoiling it, follow the following algorithm:

clean the fur coat from adhering dirt and knock it out,
turn it wrong side out,
if possible, put it in a cotton bag,
put it in the car,
pour in liquid detergent or detergent for delicate fabrics,
run the machine in soak mode for a quarter of an hour,
switch the machine to gentle rinse mode,
drain the water from the machine,
without squeezing, take out the fur coat,
place on hangers over a basin or bathtub and let flow around,
place in a dark but well-ventilated room.

To the question of whether it is possible to wash faux fur in a machine, it remains to add that at the time of washing, the joy of fur is alone in the machine. Other things cannot be placed together with the fluffy fabric. Well-dried fur should be combed with a brush.

Are there any disadvantages?

In the production of faux fur, acrylic polymers are used, which contain petroleum products, so the material cannot be called environmentally friendly. It is inferior to natural ones in terms of thermal insulation properties. In addition, the pile is a little rough and may begin to fall out over time.

An increasing number of designers and world stars prefer synthetic fiber, setting an example for others and saving the lives of animals. The variety of fur products is impressive: hats, vests, fur coats, coats, bags and toys, furniture and carpets. And we can talk about the palette of all kinds of shades, patterns and textures for a very long time. Like natural fur, faux fur requires proper care and respect.

What to do to keep your fur always fluffy

You can achieve beautiful looking fur using the following techniques:

Comb the pile periodically. You can’t pull it too hard, crush it, or tear it. This is done with smooth movements with a metal comb or brush along the pile;
Proper storage. After wearing, the item should be immediately hung on hangers or laid out without creases.

You can fluff up heavy pile by treating it with the following composition:

1 tsp. glycerin;
0.3 l. water;
0.3 l. ethyl alcohol.

Treat the lint with a cotton pad or gauze soaked in the composition. Dry and comb well. As a result of using the product, fluffiness and lightness will remain for a long time if stored carefully.

How to properly dry a product

To prevent the fur from being high with “icicles” or with “creases” after washing, it must be fluffed. Do not go too deep into the material, so as not to snag and damage the base. Superficial movements will be enough to smooth and straighten the pile on the collar or straighten the faux fur on the hood. The best one for this purpose is one that can be purchased at any pet store.

Comb gently and carefully

Dry the product away from heating devices, do not use a hair dryer so as not to damage the fiber.
Hang your outerwear on hangers in a well-ventilated area . It will take longer to dry in the bathroom, because there is a lot of moisture there.
Never dry Eco-fur in the dryer. High temperature is death for synthetics . 99% of the time, after this it will only be possible to use it in handicrafts in parts or give it to children as toys, because the pile will deteriorate, stick together, and the base will shrink.

⚠️ To the direct question - is it possible to iron Eco-fur, I will answer directly - no! Faux fur is afraid of high temperatures from any source. If the pile has become wrinkled, wet it (preferably with a spray) and comb it, it will “sag” and smooth out.

Removing greasy stains

You can get rid of greasy stains on faux fur using gasoline. It copes well with this kind of pollution.

Take a cloth and soak its edge in purified gasoline, squeeze it out so that the gasoline does not drip, and then treat the stain. Remember, so that the stains do not rub and their area does not increase, you need to move from the edges of the stain to the center, and not vice versa. The procedure can be repeated several times until the stain disappears. Afterwards, wipe the stained area with a damp cloth and dry the product. It is advisable to do this in the shade on the balcony so that the smell of gasoline disappears faster.
There is another practical method for cleaning faux fur from greasy stains. You need to mix refined gasoline and potato flour to form a thick paste. Then the resulting mass is applied to the stain and left until the gasoline evaporates completely. After this, you need to shake the fur and clean it from any remaining flour. To do this, apply heated starch to the stain and rub thoroughly. The flour will be easily removed from the fur along with the starch.

Invalid methods

Many thematic Internet resources offer a combination of gasoline and starch as one of the methods for cleaning products made from artificial fur, which is strange even as a combination.

The use of this combination to remove dirt and stains is extremely doubtful, but the pungent odor will be quite difficult to remove for a long time. Also, the use of gasoline may cause the pile to turn yellow.

Another method that should cause caution involves the use of lemon juice.

This ingredient in faux fur cleaning can simply change the original color of the product.

Coniferous sawdust is also recommended by unscrupulous advisers; they contain resin from coniferous trees, which, once it has appeared and remains on things, may not be removed.

It is also unacceptable to use cleaning agents such as acetic acid and acetone on fur, however, to add shine, a weak solution of vinegar is acceptable.