Fur coats look incredibly beautiful and expensive. That's why every fashionable girl has a fur coat in her wardrobe. Fur doesn't just keep you warm, it always stays on trend. We can imagine a beautiful picture of how a beloved husband gives his wife a mink coat. Therefore, if a woman becomes the happy owner of a mink, then she will need to ensure that the fur is always in good condition. Becoming the owner of a fur coat is one thing, but caring for it is quite another. Therefore, the product requires appropriate care. Many people do not know how to properly straighten the fur on a fur coat.
How to clean raccoon fur on a hood?
Method 2. Alcohol and salt
- 1 teaspoon of alcohol is mixed with 3 teaspoons of salt.
- The mixture is filled with 0.5 liters of water.
- After this, you need to moisten a cotton swab in the resulting liquid and treat the contaminated fur with it.
- Rinse off any remaining product with clean water.
- Leave the product to dry naturally.
Oct 23
2022 Interesting materials:
What does gainer do? Gainer what is it? Optimum nutrition serious mass gainer how to take? How to take gainers correctly? How to take gainers? How to replant hibiscus? How to root hibiscus? The chief accountant is the manager of what level? Glucosamine Chondroitin Ultimate Nutrition how to take? What can't you eat on a gluten-free diet?
How to smooth a mink coat with hot air
In order to iron a mink coat at home in the bathroom, you will need a wooden hanger or special hangers of the required size.
Sequencing:
- Hang the fur item on hangers and straighten it
- Turn on hot water in the bathroom, wait until the bath fills and a cloud of steam forms
- Then place the fur coat in a hot air bath
As soon as the fur begins to flatten under the influence of steam, shake the mink coat, and then take it to a well-ventilated room or to the balcony. But do not forget that it should not be exposed to direct sunlight.
You should not leave your fur coat in the bathroom for a long time, for a maximum of an hour, otherwise it will get wet from the condensation that has formed, and subsequently become deformed during drying.
If this method does not help straighten the pile, try the following method.
How to prevent creases and bruises on fur products
From time to time you need to take care of both the collar and the hood - take a comb with rare teeth and comb in the direction of the pile, and not against it.
Try to sit in your fur coat as little as possible. While you are sitting, folds form, and creases appear in the places of these folds. The fur in these places will cake more and more each time, and it will become more difficult to fluff it up.
Fur products cannot be packaged in a bag or case made of polyethylene or synthetic materials. They should not be stored rolled or crumpled.
It is recommended to store a fur coat in a special bag or case, hanging, on a hanger with wide hangers. In a spacious closet, so that the fur coat does not come into contact with the rest of the clothes.
Before putting your fur coat in the closet, place dried citrus peels in your pockets, preferably grapefruit. This will help repel moths.
Special precautions
- Avoid direct sunlight, otherwise the fur will look faded.
- Do not dry the fur coat with a hairdryer or keep it near heating devices.
- Avoid using chemicals against moths
- The fur coat cannot be washed or ironed
- Raw fur products should not be hung in closets
Things made of natural fur are an expensive item of clothing; not every lady can afford them. Experts recommend taking your fur coat to a special studio once a year. You need to take care of your fur coat carefully and not be lazy, otherwise your furry pet will look like a wet cat.
How to get rid of dust
Even in a well-closed case, a fur coat or vest can become dusty. Therefore, before storing a fur item for storage, and also before wearing it, freshen it.
Spread a damp white cotton sheet on the floor. Place the fur coat on top and beat it thoroughly, first on one side and then on the other. After that, hang it on a hanger and comb it.
If the fur is tangled and matted, spray the item with warm water from a spray bottle and let it dry. Then comb. The pile will fall into place. For the same purpose, you can carefully walk over the fur with a steamer.
In conclusion
If the fur trim of the collar on any outerwear has lost its attractiveness, any housewife can restore its former beauty. At home, it is recommended to moisten the edge of the jacket using a steamer, dry it and comb it.
If there is dirt and tangles on the fur, the material should be wiped with cotton wool soaked in alcohol. If it is necessary to wash the fur, it is recommended to use animal shampoo and a vinegar rinse solution.
Method No. 1
To straighten the fur of a fur coat that is a little caked, you need to hang it on a special hanger and place it in a well-ventilated place. It is advisable to choose a room with high air humidity, for example in the bathroom. Further actions:
- To do this, fill the bath with hot water to create as much steam as possible.
- Leave the fur coat in the bathroom for an hour. After some time, the fur should straighten out and take its original shape.
Method No. 2
If this measure does not help, use another method that will help you straighten your mink coat - use a garment steamer.
To avoid damaging the fur you want to straighten with hot steam when using this device, follow the instructions that came with this tool. By the way, sellers in fur salons use a clothing steamer when they hang out fur coats after storage in warehouses.
Before you steam caked fur, comb it with a special comb against the direction of the pile. Do this smoothly, without exerting force, so as not to break the fibers. It is not recommended to replace the steamer with a regular iron, since you risk scorching areas of the fur, and the scorch will stand out brightly against the background of the entire fur fabric.
If you iron the inside of a fur coat in order to straighten its fur, you risk drying out the inside and it will become dry and hard. This will lead to the singed area becoming puffy and the appearance of the fur coat will be irrevocably damaged. And this is at best! In the worst case, the flesh will crack and a hole will appear in this place, as if from a cut. But that's not what you wanted, is it?
The same applies to a hair dryer. It is highly not recommended to use it to dry a fur coat that has been wet by rain or sleet. You need to dry your fur coat naturally, away from heating devices, but not with a hair dryer, iron or radiator.
On a note
: before steaming the caked fur of a fur coat, experts recommend treating it with a special solution made from water and alcohol. It is used to remove dirt after winter and restore the natural shine of fur.
Method No. 3
You can also straighten the caked fur of a fur coat if you take it out into the cold for several hours. This way you will not only straighten the fur, but also destroy the pest larvae living in it.
– skin beetles and moths, on which even a small sub-zero temperature has a detrimental effect. To do this, lightly knock out the inside of the fur coat by tapping on the lining.
On a note:
Avoid exposing the fur to direct sunlight. This can cause the fur in these areas to fade and in relation to other parts of the fur coat, it will look lighter and faded.
Also, yellowness appears on light fur from ultraviolet radiation. The most suitable colors for this are blue, white and some pastel fur tones.
How to remove stains from fur
Stains on fur clothing can have different natures and origins. For example, natural suede bags readily give off the color of fur when worn on the shoulder. You can get dirty with sauce when you eat on the run, or make a blot with a stationery pen.
You can remove stains from dark fur using gasoline (white fur will turn yellow). Refined gasoline with a high octane number. Sometimes it is applied in its pure form, but more often it is mixed with starch or washing powder without enzymes to the consistency of sour cream. A couple of minutes after application, the mixture should be removed with a sponge soaked in clean water, and the product should be dried and combed.
Stains from light fur can be removed using acetone or alcohol, also by mixing liquids with starch or baking soda.
The stronger the dye and the older the stain, the more difficult it is to deal with it at home. If the above methods do not work, do not experiment: take the fur coat to.
We store it correctly
To avoid having to think about how to fluff up the fur trim on your jacket when the cold weather sets in, it is important to follow the rules for storing outerwear. Jackets and fur coats cannot be stored folded. These clothes are hung on hangers and stored in the closet.
Under no circumstances do we use a polyethylene cover. It is best to buy for a fur coat:
- paper or
- fabric cover.
It is important to prevent direct sunlight from hitting the fur trim. Under the influence of the sun, artificial and natural fur can fade, lose its shine and attractiveness.
How to restore shine to fur
To make your fur coat or collar sparkle again in the sun, treat it with a solution of lemon juice or table vinegar (not essence!).
Dilute lemon juice or table vinegar in water in a 1:1 ratio. Using a sponge or soft natural cloth, treat the fur. It is important that the sponge or rag is wrung out well. The pile should not be wetted, but rather wiped.
When the product dries, comb it. The effectiveness of this product is especially noticeable on mink.
Another way to restore shine to fur is to use walnuts. Grind the kernels, wrap them in gauze and rub the fur. The released nut oil will refresh the appearance of the product.
In most cases, the measures described - knocking it out and returning the shine - are enough to make a fur coat, hat or vest look like new. But more serious problems can arise with natural fur. It may turn yellow, become greasy, or become stained.
How to get rid of yellowness
Over time, light fur, as well as fur with white hair at the tips (silver fox, chinchilla and others) acquires a yellow tint. The product immediately loses its presentability.
There are several ways to clean fur from yellowness.
- Dissolve 1 tablespoon of table salt and ½ tablespoon of ammonia in a glass of warm water. Apply the solution using a well-wrung out soft cloth. Dry and comb.
- Dissolve 1 tablespoon of hydrogen peroxide in a glass of warm water. Apply the solution to the product, let dry, and comb.
- Dissolve 1 tablespoon of pet shampoo in a glass of warm water. Beat the foam and apply it to the pile using a sponge. After 5 minutes, remove the foam with a sponge or cloth soaked in clean water. Dry and comb.
Products with short pile can be wiped both with and against the wool. On long fur, cleaning agents are applied according to its growth, after which the pile can be ruffled.
When removing greasy deposits and stains, the color of natural fur is also important.
What to do if the membrane is torn
The causes of damage to the flesh include poor-quality dressing of the skin and old age of the fur. Damage to the underside of the model is a consequence of improper care. To cope with the problem, simply sew up the fur. For this purpose, it is recommended to choose a furrier's stitch. To do this you should do the following:
- Fold the flesh. In this case, the pile should be directed inward.
- Sew from right to left. This stitch resembles a regular overlock stitch. The key difference is that the needle is stuck into the same area twice. As a result, the connection area from the inside becomes almost flat.
- After the darning is completed, the fur coat should be unrolled and the seam smoothed with a moistened thimble.
By following these simple steps, you will be able to make the fixation area as invisible as possible. If suturing the mesh fails and it continues to tear, the material will need to be strengthened. To do this, it is recommended to stick a thin strip of leather or textile onto the damaged surface. It is not recommended to use superglue for this purpose as it will crack in the area of the tear.
A good option would be to use a casein solution. This substance is sold in almost all hardware stores and has an affordable price.
To glue a fur coat made of rabbit, nutria or mink, you can use Moment glue. A piece of soft and thin tissue must be applied to the affected area. Thanks to this, it will be possible to make the seam much more reliable.
How to seal a hole in a seam
If a certain element breaks in the seam area, you can repair the product yourself. To do this, it is recommended to do the following:
- Add the affected items.
- Place gauze or similar cloth on top.
- Secure all elements with pins.
- Fasten all the parts together using Moment glue. Another solution that is designed for gluing leather or suede is also suitable for this purpose.
If the procedure is performed correctly, it will be possible to restore the seam. Thanks to this, it will serve for a long period of time.
Bringing back the attractiveness of fur
So, if, after being removed from the closet or due to exposure to rain or snow, the fur on the jacket has lost its original appearance, it is necessary to dry the product. There is no need to use open heat for drying. The ideal option is to hang a fur coat made from an arctic fox, mink or rabbit on a hanger away from heating appliances. After drying, the fur should be combed without much effort.
Combing fur
To fluff up the fur on the hood, you can use steaming. However, it is important not to over-moisten the dressing. It’s great if you have a special steamer or an iron with a steaming function at home. To restore and fluff up rabbit fur, the steam flow should be kept at a distance of 50-60 cm from the fur surface.
Fluffing with an iron
To preserve the beauty of natural arctic fox, mink or rabbit fur, it is important to remember that this material is sensitive to high temperatures. This means that a fur coat made from natural fibers is dried at room temperature. Under no circumstances should the product be placed on a heating radiator.
How to smooth fur with a brush
Also, at home, your fur product can be tidied up using a special fur brush.
To begin, take a colorless foam sponge, moisten it with water, and then moisten the crushed fur. But it should not be wet, but only slightly moistened.
Then comb it with a fur brush in the direction of the pile. After completing this simple procedure, the fur product must be dried.
This procedure can be carried out at least every week.
How to fluff the fur of a fur coat?
Fluff
, laying the product out on a horizontal plane so that
the fur coat
is with the fur facing out. After moistening a clean sponge in water and squeezing it out, move along the hair growth line, as in the video. The slightly moistened pile is combed with gentle movements, the fur coat is vigorously shaken and hung out for further drying.
Interesting materials:
What does it mean to backup a folder? Why is an hCG injection given? Why is histology done? Why is paraffin given to children? What is paraffin made for? Why is an hCG injection given before a puncture? Why are Kombilipen injections given? Why are dental veneers done? Why do squats? Why do you need to screed the floor?
Installing a patch on a large hole
Fur clothing often tears on the sleeve or back. To deal with a large hole, it is worth installing a patch. To begin with, it is recommended to tear off the lining and remove the insulation. Then you should cut out the patch and place it on the affected area.
After which it is sewn to the area of the tear. To do this, it is recommended to use threads that match the color of the fur. The patch may be sewn with a marking stitch. After completing the repair, it is recommended to tap the damaged area with a wooden hammer. This will help make the fur noticeably smoother.
If the sleeve is damaged, it is recommended to open the side seam. It is then recommended to rip the lining apart. If the damage has smooth edges, it is permissible to make repairs yourself. In other cases, it is recommended to contact a specialist.
If a tear appears under the armpit, you should insert a piece of fur into the damaged area and sew it well. Such a fragment can be bought in a workshop or cut from another product. If the hole is small, you can use soft glue. In this case, rubber solution is perfect. The easiest way to repair products is from astrakhan fur. This fur has a fibrous texture. Thanks to this, it is possible to obtain an invisible seam.
