How to clean arctic fox fur at home, how to clean an arctic fox collar and care for a fur coat

Outerwear made from arctic fox fur has a presentable appearance. A distinctive feature of this material is the long pile. To ensure that the product does not lose its beauty, it is necessary to regularly clean it. Otherwise, street dirt and dust will turn the most exquisite wardrobe item into an unattractive item. Having no idea how to wash an arctic fox collar, you should not start processing it.

The popularity of products made from arctic fox is due to the fur’s ability to provide warmth over a long period. Stains formed after prolonged wear can be easily removed at home. If traditional methods do not bring the desired effect, you will have to use the services of professionals.

To treat arctic fox fur, it is strictly forbidden to use vinegar essence and undiluted acetone. These substances can cause irreparable harm. Fur items should not be dried using a hair dryer, heating radiator or gas stove. It is best to hang them outdoors. If this is not possible, outerwear should be placed in a well-ventilated room, away from radiators. The product should not be exposed to direct sunlight.

Arctic fox fur does not “like” perfume and aromatic fragrances. The same goes for hairspray, alcohol-containing compounds and bug sprays. If these substances were sprayed near the product, the fibers will stick together. Many people have lost their fur jewelry due to automatic washing and mechanical stress. The cause of the latter may be twisting or squeezing. It would be useful for every woman who owns such outerwear to know how to properly care for arctic fox fur.

How to clean arctic fox fur at home

Fur items have always been an attribute of luxury. Therefore, over the years of their use, a large number of effective methods for removing contaminants have appeared. But before you start cleaning using folk remedies, you need to make sure that they do not harm the surface. To do this, apply the composition to a separate area of outerwear, wait a couple of minutes and rinse with water. If there are no signs of baldness or loss of shade, the product is suitable for further use.

To clean an Arctic fox collar at home, you will need to spend a lot of time and effort. But if you adhere to general recommendations and rules, the end result will exceed all expectations:

Fur should not be soaked or washed like any other clothing.
Caring for such products requires natural and high-quality ingredients, and only brushes with soft bristles are allowed for combing.
You cannot dry things on heating radiators - they must dry on their own.
When drying or cleaning, do not place fur clothing near colored items.

Cleaning options:

If an item is covered in street dust, it is easy to remove it with a small stick. For such cleaning it is necessary to use a sheet, which is moistened with water and carefully twisted. The fur needs to be laid out with the pile down, and then tapped on it with a cane. A wet cloth will quickly absorb all dirt, and the material will return to its previous appearance.
You can clean a heavily stained Arctic fox's cap with wheat bran. Place a baking sheet with bran in an oven preheated to 70°C and heat for 5 minutes. Next, the product is applied to the dirty collar, which is wiped. You can get rid of bran residues with a soft brush.
Petrol. A small amount of the substance is applied to a soft sponge and used to wipe dirty areas. You can also combine gasoline with starch in equal proportions and stir until a homogeneous paste is formed, and then rub into the fur with slow movements. The fuel will evaporate on its own, and the starch will have to be brushed out. The method is well suited for cleaning white surfaces.
Ammonia. To effectively clean fur, you can combine 500 ml of water with ammonia and any detergent. Then the solution must be applied pointwise to dirty areas and wiped with a damp sponge.

Soap solution

You can care for an arctic fox vest using a soap solution. The product effectively removes light stains and street dust that has become embedded in the pile. To use a soap solution, you need to dilute shampoo or soap shavings in 500 ml of water and beat until foamy.

Using a cotton pad, apply the foam to the fur and rinse with stroking movements. When traces of dirt are removed, the remaining product should be removed with a damp cloth. Finally, the product is thoroughly dried.

Vinegar solution

Vinegar will help you care for your Arctic fox fur coat. The product fixes the shade and maintains the texture of delicate fabrics, and is also suitable for all types of fur. To prepare the composition you will need to take 9% table vinegar and dilute it with water in a ratio of 1:3.

You need to immerse a cotton swab in the composition and begin processing. This method removes any contaminants from the fur, regardless of their nature or complexity.

Talc

The Arctic fox collar can be updated with baby talcum powder without aromatic additives. The technology refers to dry cleaning methods and is suitable for dusty clothes. The method of application is as follows:

The item needs to be laid out on the surface and sprinkled with talcum powder.
The product should be thoroughly rubbed and wait 15 minutes until it absorbs all stains and dirt.
After the specified time, the clothes should be shaken and combed with a soft pet brush.
To remove powder residues, use a vacuum cleaner with a special attachment.

If it is not possible to comb out the talc with a brush, use a comb and a hairdryer, selecting the cold blowing mode.

Soda, alcohol

The method is very popular because... It is suitable for any dirt and all types of fur. It is necessary to add alcohol and soda to the warm liquid (the proportions of the components are 1:3) and stir them thoroughly.

Next, you need to moisten the foam rubber or soft brush with the solution, and then start wiping the pile. The action is carried out in the direction of the villi from the roots to the tips. This folk remedy removes dust and simple stains well.

Special brush

You can clean arctic fox fur from yellowness with a special brush, which is sold in stores that sell fur products. The device can be a comb with rounded teeth for gently cleaning long hairs. If the pile is of medium or short length, then you will need a soft brush with small bristles. With its help you can delicately comb out dirt and dust.

A simple massage comb, which every woman has at her disposal, is also suitable for preventive treatment.

Is it washable?

You cannot clean fur clothing in a washing machine, as this process will damage the structure of the pile. You can remove stains on a collar or hat by soft washing:

How to Clean White Fur

You can update a white fur vest in different ways. Such products require especially careful handling, as they quickly become stained and turn yellow. If it is not possible to dry-clean yellowed fur, proven folk remedies will come to the rescue.

You can restore the whiteness of fur using wheat flour. It needs to be heated in a dry frying pan and then applied to problem areas. The flour will quickly absorb all the dirt and have a brightening effect.

The collar also cleans well with pet shampoo. The product is diluted in water in equal proportions and applied to the surface of the fur coat. After this, the product is wiped with a damp cloth and dried in clean air.

Hydrogen peroxide

To restore the snow-white shade of your favorite fur coat or vest, you can use a proven folk method - treatment with hydrogen peroxide. Before leaving, it is necessary to carry out a superficial cleaning of the surface to remove dirt.

The product is created by adding 1 tsp to water (200 ml). peroxide. The components are combined, after which they are applied to a cotton swab and problem areas on clothing.

To improve cleaning efficiency, the fur coat can be hung in indirect sunlight. In this case, the effect of peroxide will be enhanced.

Blue

Blue can be used for all silver shades of fur products. To remove yellowness, it is enough to dilute a small amount of the product in water so that the consistency becomes slightly blue.

Then a sponge is immersed in the solution, and the process of cleaning the product from contaminants begins. After processing, the fur is placed to dry and combed.

Gentle wash

Rain or wet snow will inevitably wet the pile, which is undesirable in itself, plus it will require a long drying time.
Dust constantly accumulates, turning collars, hats and fur coats into a dust collector - and this also kills whiteness.
Areas of fur that are exposed to cosmetics (cream, powder, perfume) or sweat from human skin will quickly turn yellow.

White collars look especially charming. They highlight the beauty of the face, but get dirty very quickly. In addition, white fur tends to turn yellow over time if not stored correctly.

How to clean your collar

An arctic fox collar looks elegant on any product, however, due to constant contact with the neck and face, it can become dirty and lose its attractive appearance.

To carry out a comprehensive cleaning of such an item, you can use any of the methods listed, but since the collar is small, it can be knocked out and wrapped in a damp cloth.

To remove foundation or lipstick stains, use alcohol or stain removers.

Recommendations

To slow down the aging of a product made from arctic fox fur, cleaning it at home should be carried out according to certain rules and following recommendations, such as:

do not expose fur to prolonged exposure to moisture and regular washing;
use only products based on natural and safe ingredients for cleaning;
Do not dry products on heating devices or heat sources;
make sure that during the cleaning process the fur does not come into contact with dyed items that are prone to shedding;
Being a rather capricious fur, the Arctic fox does not tolerate the influence of perfumes and hairsprays on it - they subject the pile to gluing, which leads to its drying out and deformation.

Professional products from the store

If folk remedies do not give positive results, you need to use professional store-bought formulations:

FURASOL;
NETBRIL-O concentrated;
SHINE-FINISH /TCHB / TCCB / PARVA-CHEMIE etc.

Among store-bought products, there are deep- and superficial-effect cleaners, preparations for restoring the fluffy structure, wet wipes and deep-acting foams. Similar products also have a disinfecting and antiseptic effect. At the same time, it does not contain aggressive chemical additives or harmful substances. Whole sets of fur clothing care products are available for sale, and the method of using them is simple and is indicated in the instructions.

When is the best time to go to dry cleaning?

There are cases in which home remedies do not help and you cannot do without the help of specialists. This includes situations where a person spills something on the pile.

You should contact a dry cleaner if the fur is contaminated with vegetable oil, food products, drinks and machine oils. Even seemingly harmless substances can leave difficult-to-remove stains on the lining of the product. It is almost impossible to remove stains left by perfume from the lining.

You cannot do without dry cleaning in cases where traces of foundation and cream powder remain on the collar. It is better to take products made from Arctic fox to dry cleaners that specialize specifically in fur clothing.

The correct choice of dry cleaning service, which will select the optimal temperature of perchlorethylene, will allow you to dry clean your fur coat up to 6 times.

The article has been verified by the editors

Precautionary measures

Before cleaning fur clothing, you should familiarize yourself with the precautions that will protect the product from losing its presentable and beautiful appearance. Do not forget that natural fur is not machine washable, so you need to care for it only using the methods listed above. Interaction with a small amount of moisture will not harm the fur surface, but excessive wetting will lead to the fact that the fur coat or vest will be completely damaged. If the material is wet, do not use a hair dryer or other similar equipment for drying.

Many problems with fur items occur due to improper storage. So, if the item was hung in an open room with high humidity, it will be seriously damaged.

Regardless of the method used, you should not rub the fur with vigorous movements, as this may damage it. And if the villi are long, they can be processed exclusively in the direction of growth.

In most cases, it is mentioned that they are cleaned with gasoline, ammonia, semolina, flour, wheat bran and starch. However, such products are not always suitable for fur surfaces, and their incorrect application can lead to unpleasant consequences.

Often, after choosing the wrong composition, the owner of a fur coat or vest is forced to comb it out for a long time, which disrupts the fleecy structure, making the fibers hard and beautiful. As a result of such care, the material becomes dull and begins to smell unpleasant.

What ways can damage the product?

According to professional craftsmen with extensive experience, the use of pure acetone and vinegar essence for cleaning is prohibited. The products can irreparably damage fur coats, collars and hats.
Do not use heating radiators, other heating appliances, gas stoves, ovens or hair dryers for drying. The best way is to dry the fur in the fresh air, not under direct UV rays, otherwise there is a danger that the fur will completely lose its appearance.
The Arctic fox has capricious fur that does not tolerate various fragrances and perfumes. It is not recommended to spray substances that glue pile and deform materials near arctic fox products. These products include hairspray, substances containing alcohol and insect repellent sprays.
You can easily ruin an arctic fox hat or fur coat if you wash it in a washing machine; hand washing is also undesirable. A prerequisite for hand washing fur is a maximum temperature of 35 degrees. The product should not be wrung out or twisted.