Ways to clean a fur coat made of natural or faux fur at home - cleaning from yellowness


A fur coat made of natural fur is the ultimate dream of every fashionista, because this special thing looks expensive and presentable. Although today it can be perfectly replaced by high-quality artificial material. However, luxury clothing requires delicate care. The cost of services of modern dry cleaners in relation to fur products can be prohibitively high, and no one guarantees a successful result. Therefore, owners of such magnificence should know how to clean a fur coat at home made from natural fur. Artificial, in turn, also requires some attention.

Our article with video describes the basic cleaning methods and gives useful recommendations that will help restore your favorite clothes to their former shine, color and well-groomed appearance.

When to clean your outerwear

Even the most expensive and high-quality thing can sooner or later become wrinkled, worn out, or dirty. Decoration made from animal fur is no exception. Such a product must be looked after carefully and scrupulously, and it must be cleaned or restored in a timely manner.

Signs that it’s time to tidy up the fur include the following factors:

  • Manifestation of uneven color of the product.
  • The presence of visible particles of debris between the villi.
  • Plaque and dust contamination, as well as stains.
  • Clumped fur.
  • Loss of shine.
  • Stale smell.

Tip : hang the fur coat on a hanger and direct the air flow from the hair dryer to the lint. If they scatter easily, then cleaning is not yet required. When the fur becomes sticky and crumpled, it’s time for special care.

When Cleaning Is Required

The service life of fur products with careful use is at least 10 years.
During this time, the fur becomes dirty repeatedly. Untimely and improper cleaning can cause damage. But frequent procedures are not good for fur clothing. There is no schedule that would indicate the frequency of cleaning - everything is individual and depends on factors related to the appearance of the fur. Cleaning is required if:

  • there are spots uncharacteristic of the pile pattern;
  • the fur has turned yellow, green or lost its shine;
  • the color has lost its uniformity and smooth transitions;
  • the pile has become greasy and greasy;
  • the flesh became coarser and tougher.

How to clean dark natural fur

A quick and inexpensive way to return such a product to its original appearance is to use rye bran or crushed crackers. These products are able to adsorb contaminants well. The cleaning process is as follows:

  1. Cover the fur fibers with thick food powder.
  2. Carefully but gently rub the fur between your palms.
  3. Shake the item and remove any remaining product with a soft brush or vacuum cleaner turned on at low power.

This effective method is suitable for durable products, for example, made from wolf, goat, nutria, and raccoon fur.

They also use clean sand; it perfectly removes dust and dirt from a beaver or otter fur coat.

And soft furs, such as muskrat and fox, require more gentle treatment. In this case, small sawdust from trees of different species is ideal. However, you should not use this material from spruce or pine - it contains resins that can only damage the structure of the pile.

Removing dirt and stains

If severe stains or dirt appear on the mouton coat, they can be dealt with in the following ways:

  1. You can eliminate the problem of greasy stains with powder and shampoo. These products are combined in any suitable container and then applied to the contaminated area. After 10-15 minutes, the remaining composition should be washed off with a clean piece of cloth.
  2. Dirt stains are removed with ammonia and salt. A cotton pad is soaked in the solution, after which the stains are wiped with it.
  3. To remove dirty stains, it is allowed to use a mixture of alcohol, vinegar and water, combined in equal proportions. The product is applied to the pile using a kitchen sponge or brush, and then washed with a paper towel.
  4. Areas with heavy contamination are treated with a cotton swab soaked in gasoline. To remove unpleasant odors from the fuel mixture, you need to sprinkle the area with corn or potato starch. The composition is rubbed into the fur and then removed with a damp cloth.
  5. You can get rid of dirt with simple bran. They need to be heated in a frying pan and applied to problem areas of the fur coat. The bran particles must completely absorb contaminants. After processing, they should be shaken and the fur combed with a special brush. Sawdust can be used as an alternative for bran. They are available in pet stores and do not leave marks on the fur coat.

If you have difficult stains from chocolate or alcoholic drinks, it is better to contact a dry cleaner.

How to clean light natural fur

Cleaning white fur is quite delicate and not as easy a procedure as it seems at first glance. She has her own secrets and features.

Use powders that absorb dirt and grease - starch, semolina and talc. These products should be used as follows:

  1. Lay the fur coat on a flat surface, with the stain facing the front side.
  2. Heat the adsorbent in a dry frying pan for 3 minutes.
  3. Sprinkle the contaminated area with the resulting powder.
  4. Use a soft brush or cloth to distribute the product into the lint.
  5. Using your hands, gently rub the cleanser into the fur.
  6. Remove any remaining absorbent that has absorbed dirt. To do this, shake the product well several times.
  7. Carefully comb the fur coat with a thick comb.

Advice : if it was not possible to immediately obtain the desired result, repeat all steps until the absorbent being cleaned turns white again.

Talc powder or starch (potato), diluted with purified gasoline, perfectly removes stains and dirt from light fur clothing. It is prepared in the form of a homogeneous paste without lumps, and then applied to problem areas with a sponge and allowed to dry completely. Then the product should be shaken, and the remaining mixture should be removed with a stiff brush.

To effectively clean light fur, mix 50 ml of 3% hydrogen peroxide with the same amount of water and pour the solution into a spray bottle. You need to spray the pile, let it dry completely and comb it.

Features of processing white mink fur

White or blue fur is the most difficult to clean, since this fur is subject to the most severe processing. The pile becomes bleached and dyed, making it more vulnerable to various substances.

At the same time, white fur gets dirty more often, and dirt on it is more noticeable. In addition, white pile often turns yellow from light. Because of this, the fur coat looks sloppy and worn.

  • A 1:1 mixture of hydrogen peroxide and ammonia will help remove yellowness.
  • You need to wipe your fur coat with this solution.
  • Peroxide will lighten the pile, and ammonia will enhance its effect.

To clean dirt, it is better to choose dry methods other than starch, but do it regularly. As soon as a stain appears, it should be removed immediately. It is also best to carry out preventive cleaning at the beginning, end and middle of the season.

How to remove dust and light dirt

If your fur clothing is dusty, you can quickly fix this problem by following these simple steps:

  1. Lightly wet a white cotton sheet and spread it on any flat surface - a table, bed or floor.
  2. Place the fur coat evenly on the fabric, nap side down.
  3. Using a carpet tool or rolling pin, knock out all the dust with small taps.
  4. Afterwards, hang the fur coat on a hanger or hanger, dry it a little, but avoid direct sunlight, and comb the fur.

If your favorite outerwear is slightly dirty, then a solution prepared from a mixture of the following substances will help restore it to cleanliness:

  • 2 tsp. alcohol;
  • 1 tsp. table vinegar;
  • 100 ml water.

Wipe the contaminated areas with a soft sponge or clean cloth soaked in the product. After drying, ventilate the product to remove the smell of vinegar, and comb. To prevent the fur's pile from sticking together, lightly run a steamer over it before you start working with the comb.

Please note that this solution is not recommended for use on faux fur items.

Tip : to reduce dust on your fur coat, store it in a special clothing case.

Methods and recipes for cleaning mink products

When cleaning a fur coat, it is important to remember that any careless action will lead to damage to the clothing. You cannot wash your fur coat; it will shrink and shrink in size. Mink coats can be cleaned in two ways: wet and dry. In this case, funds that are always available in the house are used.

Wet cleaning: features and recommendations

Wet cleaning a mink coat is a more effective method suitable for removing deep dirty stains. Before cleaning, the mink coat is placed on hangers in a vertical position. After cleaning the fur coat, you need to comb it with a special brush and let it dry.

When drying, do not use a hairdryer or iron!

Shampoo, gel, soap solution

Heated soapy water is one of the common methods for cleaning mink. The number of components is taken from the calculation of the volume of the fur coat. The longer and larger the fur coat, the more solution you need to clean it. Dissolve 100 ml in a bowl of warm water. shampoo, shower gel or regular laundry soap. Moisten a sponge in the solution and gently wipe the hairs of the fur coat with it, from root to tip. You can fix pieces of cotton wool on the teeth of a comb, and, dipping it in the solution, comb your fur coat.

Vinegar and hydrogen peroxide

5% vinegar cleans mink very well from dirt and restores its original shine. If you need to tidy up a white fur coat, then replace the vinegar with hydrogen peroxide.

Petrol

Aviation gasoline or lighter gasoline is used to clean the collar, as it gets dirty faster than other areas of clothing. Traces of perfume, creams, and lipstick often remain on the collar, which are very difficult to remove. Gasoline is mixed with burnt magnesia, which can be purchased at a pharmacy, to a mushy mass. Apply the paste to the contaminated area and rub against the lint. After drying, comb the fur thoroughly and wipe with 5% vinegar.

You cannot clean light fur with gasoline, otherwise it will turn yellow!

Ammonia+salt

In a glass of warm water, dilute a tablespoon of table salt until completely dissolved, add half a teaspoon of ammonia. Soak a soft cloth or gauze in the mixture and use pressure to clean the fur coat.

Alcohol or vodka

In the following way, the fur coat is cleaned from dirt and dust; in addition, after treatment with alcohol, the former shine returns. Add 5-6 drops of alcohol and 1 drop of cleaning agent to half a glass of hot water. Mix the mixture thoroughly, then use a cotton swab dipped in it to clean the fur coat in the direction of the pile.

Dry cleaning

This is a more gentle cleaning method, suitable for removing shallow dirt.

Starch

Place the fur coat on a smooth, flat surface, for example, on a table. Then sprinkle with potato starch and thoroughly rub the surface of the fur coat with it. If the starch becomes dark, repeat the procedure. After treatment, shake off the fur coat well.

Talc or tooth powder

Tooth powder, talcum powder, or regular baby powder are excellent products for cleaning mink fur at home. Clean with tooth powder in the same way as with starch.

Sawdust

The pet store sells sawdust from hardwood trees. A small amount of them needs to be mixed with regular clean gasoline. Apply the mixture to the fur, rub it with your hands, then shake it off, comb the fur and treat it with vinegar.

Semolina

Semolina is used to clean a fur coat in the same way as starch, but there is another cleaning method. Boil a tablespoon of semolina in a glass of milk. Apply the cooled porridge to the fur coat in a thin and even layer and leave for 6 hours. After this, it is good to clean the fur coat of semolina, comb it and dry it at room temperature.

Hot sand

Heat fine, well-sifted sand and then pour it onto the fur. Rub with your hands, remembering to replace dirty sand with clean sand. Repeat the procedure until the fur coat is clean.

Dry cleaning option

The method without adding any moisture involves using only starch, talcum powder, sawdust, baby powder, salt, and a soft brush or rag.

The algorithm of actions is no different from the procedure with talc or semolina - the fur should be thickly sprinkled with an absorbent substance, left for half an hour, and then shake the product well. Salt, for example, perfectly absorbs oily stains, as well as various street pollution.

Tip : dry clean your natural fur coat once a month. This will help avoid premature deterioration of the item's condition.

The use of river sand in the process of cleaning also refers to dry methods of getting rid of fur contaminants.

  1. Place the product on a flat surface. Pour heated sand onto it.
  2. Rub it thoroughly into the lint and then shake it off.
  3. Pour in the component again and shake out the fur coat again. The procedure must be repeated until the fur is clean.

Mechanical removal of dirt using a comb or wire brush is also a “dry” method. For greater effect, put a piece of cotton wool on their cloves.

Is it possible to use a washing machine?


Is it possible and how to wash a mouton fur coat?
Washing by hand or in a washing machine is the worst thing you can do with a mouton fur coat. In addition, wearing a fur coat is risky even when exposed to rain or sleet. As a result of prolonged contact with water, the natural fat present on the leather base (hide) is leveled. And this leads to the loss of fur elasticity and visual appeal.

Another important point that makes washing a mouton difficult. When moisture is absorbed, the fur becomes so heavy that it is impossible to even lift it with your hands.

Moreover, an automatic machine will not be able to cope with such a task. The result is a damaged item and equipment.

The only thing acceptable for a natural fur coat is surface wet and dry cleaning, as well as professional dry cleaning.

Wet cleaning options

These include those that use liquid products and solutions to clean products. For example, for “cosmetic” wet treatment the following composition is prepared:

  • 0.5 l warm water;
  • 1 teaspoon of ammonia;
  • drop of liquid powder.

Cleaning should be done as follows:

  1. Spread an oilcloth or an unnecessary sheet on the table. Place the fur item on it.
  2. Dampen a soft sponge in the solution and walk over the dirty pile several times.
  3. Remove any remaining product with a damp cloth or a clean cloth slightly moistened with water.
  4. Dry the product thoroughly and then comb thoroughly.

Important : natural fur should never be washed. The leather base, to which the fibers are attached, may crack when in contact with water, and the fur may subsequently crumble.

Cleaning fur with shampoo

The best solution for emergency cleaning of dirt from fur is a water solution with shampoo . You can use a special one for animals for these purposes. A regular one with a moisturizing effect will also work. To do this, you will need 2 cups of warm water, shampoo, a sponge, dry white wipes or a cloth that absorbs water well.

Cleaning is carried out in several stages:

  • Dilute the solution in one cup - a couple of drops of shampoo and stir until foam forms;
  • take foam on a sponge and thoroughly clean the stained area;
  • remove foam from the sponge in clean water and remove the soap solution from the fur.

Before leaving the fur coat to dry, you need to blot the moisture from the fur with a napkin so that it dries faster and the inside does not have time to get wet.

How to clean a natural fur coat from yellowness

Yellowing is an unpleasant defect that catches the eye, especially on light-colored fur products. It usually occurs from exposure to direct sunlight or heat. It is impossible to completely get rid of the defect, but there are several ways to make it less noticeable.

  • Dilute 3 tsp in 0.5 liters of slightly heated water. regular salt and 1 tsp. ammonia. After soaking a rag or sponge in the solution, apply it evenly to the pile. Afterwards, dry and comb the fur.
  • Use hydrogen peroxide (3%). You will need a tablespoon of the drug, diluted in a glass of water at room temperature. Further, the algorithm is the same as in the paragraph above.
  • You can spray the pile with a solution of water, alcohol and vinegar in equal proportions. Then blot the surface with a dry cloth.
  • Fur is also treated with a mixture of starch and soap solution. The mixture is rubbed into the pile with your hands, allowed to dry, and then cleaned off with a brush. The item needs to be shaken and dried.

Advice : before using any cleanser, you should check what its effect will be by treating a small, inconspicuous area of ​​the product.

Removing stains

There are situations when the lining for a fur coat is very dirty. To find out how to get rid of a stubborn stain, you need to identify the cause of its occurrence.

Cleaning the fur lining

To remove grease stains from lining fabric, use dishwashing detergent. A few drops of the product should be diluted in warm water. The resulting solution is applied to the contaminated areas of the fabric using a sponge. After a few minutes, you need to rinse the lining.

To get rid of stains left by cosmetic products, you need to take 150 ml of water and add 5 ml of ammonia and dishwashing detergent to it. The resulting solution is applied to the stains. After 10 minutes, the fabric can be rinsed.

Photo of the lining of a mink coat

Anyone can replace and clean the fur lining manually. The most difficult thing in this process is steaming the lining fabric without damaging the fur. The process of washing the lining does not cause any problems and takes a minimum of time. By following the rules of washing and drying lining fabric, you can increase the service life of the entire fur product.

How to restore shine

If a natural fur coat or its collar has lost its luster, shine, or stopped shimmering, then you can restore its former presentable appearance with the help of some home remedies.

The solutions used are different, but the method of processing the product is approximately the same.

The following substances are effective:

  • Lemon juice, glycerin solution. Both ingredients, or separately, are applied to the fur with a sponge. Then remove with a dry cloth.
  • Acetic or alcohol solutions in equal proportions with water.
  • Composition: 1 liter of hot water, 100 g of fish oil (or pork) and 10 g of soap. After cooling the composition to room temperature, add 10-12 drops of ammonia. The mixture is applied to the fur without rinsing.
  • An excellent result of restoring shine is achieved by the above-described method of treating the product with gasoline combined with starch.
  • Walnut. The kernels are crushed and placed in a gauze bag, which is passed along the pile of the fur coat. The fur begins to shine again.

Important : all the described products, except glycerin, should be applied only to the pile, avoiding their contact with the flesh.

Features of cleaning at home

The method depends on the type of fur, as it can be natural or artificial. The color of the fur coat is also taken into account: light or dark. Incorrectly selected cleaning products will damage the product.

Natural fur

The material is capricious, which a person should remember when starting cleaning.

Mink

A person’s main concern in this matter is how to maintain the shine of a mink coat. Fat is responsible for this, which is washed out over time. The problem is solved as follows. For 1 liter of boiling water, take 10 g of liquid soap and 100 g of fish oil.

Arctic fox

To clean the product, ammonia mixed with 500 ml of warm water and 1.5 tbsp is suitable. l. salt. A cotton wool is moistened in the solution and used to process the product.

Rabbit

Fur coat care is as follows:

  1. The lint is combed out with a soft comb.
  2. Hydrogen peroxide is applied in the direction of the hairs.
  3. Remains of peroxide are removed with a soft cloth.

In the latter case, act carefully so that the lining does not deteriorate.

Silver fox

Alcohol works well for this purpose. The surface of the product is treated with medical alcohol. First they move against the pile, then in the direction of growth.

Raccoon

Mechanical combing is the best cleaning method to avoid damaging the fur. Cotton wool is placed on a comb with metal teeth. The fur is moistened with water from a spray bottle and processed with a comb.

Mezdra

The leather base of a fur product becomes rougher over time. If this happens, special methods will help correct the situation. Dissolve 1 egg yolk and 1 tsp in 1 liter of warm water. Vaseline. The latter can be replaced with glycerin if desired.

The resulting mixture is applied to the underside of the fur. After this, the flesh is kneaded with smooth movements. Once the remaining product has been removed from the leather, the fur coat is sent to dry.

Tsigeykovy

Starch and liquid washing powder are mixed in equal parts. After obtaining the slurry, the composition is applied to the fur. The pulp should be thoroughly rubbed into the fur, as this will improve the result. After the mass has dried, it is combed out with a brush.

Astrakhan

Starch, vinegar, ammonia and peroxide are suitable for cleaning the product.

Artificial

To clean the products, feel free to use a washing machine. But the mode selected is delicate - 600 rpm and 40 degrees. Spinning is excluded. Faux fur coats can be washed with gentle detergents.

White fur items

In the first case, potato starch or semolina is used. The dry mixture is applied to the surface of the product, and the person performs actions reminiscent of hand washing. After the substance is ground with dirty particles, the fur coat is shaken until the powder is completely removed.

Hydrogen peroxide becomes an essential part of cleaning when it comes to white items. 1 tsp dissolves in 200 ml of warm water. peroxide. 5 drops of ammonia solution are added to the liquid, after which everything is mixed.

Using a sprayer, the solution is applied to the surface of the product. After the manipulations have been completed, the fur coat is taken out into the open air. It is advisable that it be in direct sunlight for at least 8 hours.

How to clean artificial material

Thanks to new manufacturing technologies, modern faux fur coats are difficult to distinguish from natural ones. However, it must be remembered that caring for this product must be just as careful, thorough and timely.

To completely clean this fur item, stock up on a basin, warm water, a sponge, a rag, powder or liquid soap, and a clean, dry towel. Follow this instruction:

  1. Dilute the detergent in water (about one tablespoon per liter), whisk until a thick foam forms. Apply it with a sponge to the surface of the fur.
  2. Lightly rub the dirty areas.
  3. Remove any remaining foam with a damp cloth. Afterwards, transfer the item to a terry towel and keep it there until completely dry.
  4. Finally, use a soft brush to comb the pile from top to bottom.

Faux fur clothes can even be washed in a machine, but on a delicate cycle and without using a spin cycle. The item should be dried in the fresh air by hanging it on a hanger.

An effective cleaning solution is also a mixture of alcohol and water, taken in equal quantities (250 ml each) and a teaspoon of glycerin. The composition is applied with a cloth and removed with a dry washcloth.

Is it possible to wash a fur coat?

It is quite easy to remove a stain or other small dirt from a fur coat, but if the fur coat is more than one year old or heavily soiled, the question arises: Is it possible to wash the fur coat? Of course, it is possible, but such a procedure must be done correctly, otherwise you can ruin its appearance and render it unusable.

  • Natural fur can be washed, but only by hand using liquid powder or shampoo in a large container of water, at a temperature of no more than 30 degrees.
  • Faux fur can be washed in a washing machine using the delicate cycle. To rinse, be sure to add conditioner or a weak vinegar solution.


Washing faux fur in the washing machine

  • After hand washing natural fur, the fur coat should be hung by its hangers over the bathtub. Once the water has drained, you can hang it on a rope. It is not recommended to remove the fur coat from its hanger, otherwise it may lose its shape.
  • You need to twist the fur coat in the washing machine at low speed. Then take it out of the washing machine and hang it on a hanger.
  • As the fur coat dries, you need to shake the fur and comb it with a brush or wide-toothed comb. Otherwise, the fur may dry out and become brittle. If, after the fur coat has dried, the fur looks sloppy, you can lightly moisten it with damp water and vinegar diluted in even parts and comb it according to the growth of the fur hairs.
  • After complete drying, it is recommended to moisten the lining of the fur coat with an antistatic agent. This will help prevent static electricity and dust particles from being attracted to the fur.


The condition of the fur coat before and after washing - the result is obvious

How to properly care for a fur coat

Since a fur coat is not only an addition to your look, but also an element of style and taste, it should always look impeccable. Please be aware that there are multiple factors that can cause damage to this product, including:

  • Wearing clothes in snow or rain, as a result, the fur sticks together, becomes unkempt and scanty.
  • Inaccurate use of cosmetics or perfumes. Foundation, powder or lipstick can leave marks, for example on your collar. Apply any perfume or eau de toilette to clothes under a fur coat, otherwise the alcohol base will corrode the color of the product.
  • Friction with bags, briefcases, clutches, belts, and jewelry is also harmful to fur. This leads to thinning of the fur fibers. In addition, some colored haberdashery items may fade and leave stains on a light-colored item.
  • If a fur coat has not been aired or worn for a long time, and has been lying in the closet for several months, it can become an excellent “treat” for moths.

Compliance with the rules of wearing and storage will significantly extend the life of your favorite item.

Care according to species

The first thing you need to remember is the expiration date of the products. Furs from animals of different types are stored each in their own way, and for different amounts of time. For example, a rabbit will last no more than 5 years, but you can show off in an arctic fox fur coat for 7-8 years. The most durable are the beaver and the otter. They are worn until the age of 20.

For better preservation of any type of natural product, the following measures must be strictly observed.

  1. The item should be kept in a dark, dry place, it is best to first put on a clothing cover.
  2. It is also recommended to put a proven moth repellent there for the safety of the fur.
  3. To avoid damaging the fibers and wrinkles of your fur coat, hang it on a hanger. At the same time, do not squeeze it with other things - the product should hang freely.
  4. Before storing fur clothing in a closet for a long time, dry it in the open air, but keep it away from direct sunlight.

Arctic fox

  1. Before each trip outside, comb the fur from top to bottom with a stiff brush.
  2. After wet cleaning, dry the fur at room temperature by hanging it on a hanger. Never use a hair dryer or radiator for this.
  3. When fighting moths, try not to use sprays and mothballs. The smell is pungent and is strongly absorbed into the fur, making it extremely difficult to remove. It is recommended to purchase tablets or sachets.
  4. If you don’t know how to clean arctic fox fur and remove dirt at home, then it’s better to trust the professionals and have the product dry-cleaned.

Mink

  1. The collar of a mink coat requires special attention. Therefore, do not use lipstick or foundation to avoid staining the fur, otherwise it will be almost impossible to remove such stains. It is best to wear a scarf or scarf underneath.
  2. Mink should never be dried in the sun; it will fade and deteriorate irrevocably.
  3. The owner of a fur coat must take into account the delicacy of the product. Do not stand in lines to avoid rubbing against fur, do not sit on dirty benches and chairs. You should not carry bags or briefcases.

Rabbit, goat, nutria and wolf

  1. Such products are lighter in weight. This is due to the fact that they have a thin layer of flesh - skin. Therefore, furs from these animals cannot be worn in the snowy or rainy seasons.
  2. For this outerwear, dry clean only. Use starch or corn crumbs. Rub the composition into the fibers, then shake thoroughly.
  3. Be sure to store your fur coat in a case with a small amount of moth repellent added to it, otherwise in winter you will find a thing that has been eaten by insects.

Otter, beaver and mole

The fur of these animals is considered not only the strongest and most durable, but also the most frost-resistant.

  1. Due to the many positive characteristics and long-lasting wear, natural otter and beaver products are very expensive, but you pay a pretty penny for high quality and durability.
  2. If you wet the fur, then it is unpretentious in drying. It is enough to place the product near the battery, hanging it, for example, on a chair. Then comb the fibers.
  3. Over time, things made from beaver or mole may become salty. Use a solution of alcohol and warm water in a ratio of 1:10 to wipe the fur, then dry and comb the same way.

What should you not do when cleaning your fur coat?

Cleaning a fur coat at home can either improve the condition of the fur, remove dirt, give it its original shine, or ruin its appearance. It is very important to properly clean your fur coat and not use dubious products. Let's consider several options that cannot be used when cleaning or storing fur coats:

After cleaning your fur coat, you should not dry it over a fire, radiators, or use a hairdryer. It should dry on its own, hung in a warm room by its hangers. As it dries, you need to shake it and comb it with a wide-toothed brush.


A fur coat made of faux or natural fur should be dried on hangers, this will help avoid deformation of the fur coat.

  • It is strictly forbidden to iron any fur coat.
  • There is no need to comb the fur unnecessarily.
  • It is forbidden to clean fur with washing powder, which contains enzymes. Such powder can ruin the fur. It is better to use liquid powder.
  • You should not clean your fur coat at home with dubious means.
  • It is forbidden to store a fur coat in a plastic bag or rolled up.
  • Fur coats should be cleaned at the end of the season, just before they are put away in the closet.
  • It is recommended to take your fur coat out of the closet once a month and air it.
  • Use special lavender-based moth repellents that can protect your item.
  • Direct sunlight and temperatures above 25 degrees are considered harmful to a fur coat.
  • Proper storage and cleaning of a fur coat will help increase the wear life of the fur coat and reduce the amount of dirt.


Proper cleaning and storage of a fur coat will help increase the wear life.
Cleaning a fur coat is quite a difficult task. Before doing it yourself, try cleaning a barely noticeable area of ​​the fur coat. If you like the result, then you can clean other areas. If you have doubts about whether you can handle cleaning your favorite fur coat, it is better to take it to the dry cleaner. However, if you still decide to carry out the cleaning procedure yourself, we suggest watching the video instruction “How to clean a fur coat at home.”

How to store

Pay special attention to fur items before storing them in the closet. Inspect the clothing and inspect for stains, dirt, and yellowing. If any defects are found, correct them. Next, ventilate the item well during the day. Remember to avoid direct sun exposure.

Stock up on a durable cover for clothes and moth repellents - they will help your “darling” wait until the next season. Immediately before packing your fur coat, wipe it with glycerin. This will preserve the shine and elasticity of the fur for several months. Warm up the product and rub it in your hands, run your palms over the entire surface in the direction of the pile. Now the luxurious item will be preserved for a long time and will wait for the next “release”.

Important : a fur coat should not be stored in a plastic bag, nor should other clothing be placed on top. You should avoid touching things that may shed.

By using homemade or “folk” products for cleaning and caring for natural or faux fur items, as well as following recommendations for their proper storage, you will not only extend the life of your luxury clothing, but also save significant money on professional dry cleaning services. However, in complex or advanced cases, it is better to contact specialists to restore a fur coat damaged by stains or dirt.

In what cases is it better to contact a dry cleaner?

At home, it is difficult to organize proper cleaning of natural pile, especially if there is visible damage, greasy areas or stains on it. In this case, it is better to take the product to dry cleaning, where specialists will carry out high-quality treatment in one of the following ways:

  1. Dry (classic) cleaning. Along with the fur coat, wood chip components and gentle chemical reagents are loaded into the drum, penetrating deep into the material and cleaning it from various contaminants.
  2. Dry cleaning. Aggressive treatment using cleaning agents that restore the cleanliness, freshness and appearance of fur products.

Professional dry cleaning will help restore shine, restore color and water-repellent properties, and protect against moths.

What is the difference between light cleaning and deep cleaning?

The choice of intensity of the proposed cleaning depends on the degree of contamination of the fur.

Easy cleaning is used when the product is only slightly dusty and does not have a greasy sheen, yellowness, or unpleasant aroma.

To carry out the procedure it is enough:

  1. Wet the cotton cloth with plain water.
  2. Spread the material on a flat horizontal surface.
  3. Place fur on top, for example, a fur coat, pile side down.
  4. Knock the thing out with a clapper.
  5. Shake and dry.

The settling of rare dust particles and sand is not a reason for deep cleaning. It is carried out only when the clothes have lost their neat appearance and the fur has become greasy.

Cleaning is carried out in the following sequence:

  1. Gentle removal of dust using the knocking method.
  2. Removal of local contamination.
  3. Combing out dirt using a comb.
  4. Treat the surface with the selected cleaning agent.
  5. Repeated combing.
  6. If necessary, knocking out (indicated for dry cleaning) or drying (for wet cleaning).

For both light and deep cleaning, combing is recommended to maintain the correct direction of the pile.

Precautionary measures

  1. Any option for cleaning faux fur should be first tested on an inconspicuous area to determine its reaction to the cleaning ingredients.
  2. The use of industrial rust powders and other aggressive substances is strictly prohibited.
  3. During cleaning procedures, make sure that all products in vials, containers, and jars are closed and kept away from the fur coat.

Share this information with your friends and don't forget to join us on social networks.

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]