Painting nubuck: recommendations and features of the process art-textil.ru

Any leather product loses its original appearance over time. Nubuck, one of the types of leather, requires systematic, more thorough care. The most popular product is paint for nubuck shoes. This is a convenient and relatively inexpensive way to update your favorite boots. Do-it-yourself painting does not require special skills or tools. This procedure takes no more than 10 minutes.

This is interesting: how to paint the soles.

Learning how to properly paint shoes

Contrary to all laws, over time, even the best quality and most comfortable shoes lose ground and require a complete update.
In order for it to serve you as long as possible, you should not neglect its appearance. Even small scratches can ruin everything and leave you without shoes at all, so we offer you an easy and budget-friendly solution. Full painting, which can be done at home, will help restore the original appearance of your shoes. And armed with our useful tips, this is the only way you can say goodbye to defects. We have already talked about the types of shoe materials; this fact is not unimportant when painting. There are basic painting rules for everyone, but each material requires a special approach.

No. 1. Pre-cleaning

In order for the paint to adhere perfectly, you need to thoroughly clean the surface from dust, dirt, and residues of care products. To speed up the process, you can use a cleaning product. They often come with paint, and if you don’t have a cleaner, then here’s a recipe for a homemade cleaner. Take a little liquid soap and add warm water; this soap solution will easily remove all dirt. You can add a little ammonia. Lather your shoes with a sponge or rag and rinse with plain water. After cleaning, the shoes should dry well naturally, that is, not under radiators or a hairdryer. Heaters dry out and deform shoes. When the shoes are clean and dry, we can move on to the next stage.

No. 2. What is the best way to paint?

Sometimes you go to a store, and there are thousands of dyes, and the question immediately arises: which one to choose? For our customers, we have chosen Kaps brand products: high-quality and time-tested assistants for any shoes. Also, when choosing paint in a store, you can take advantage of the advice of the seller, but sometimes listen to the advice of specialists. Paint selection criteria :

Having determined the material of your shoes, go to the appropriate department. This important factor must be taken into account.
In terms of specifics: it is better to buy specialized paint for shoes and not experiment. Most paint comes in spray, water-based, or powder form. This is what it is advisable not to skimp on paint.
You can use acrylic paint to decorate shoes. Today there is a wide range of painting products; there will definitely be plenty to choose from.

No. 3. Let's move on to painting

By following the basic rules for painting shoes at home, you can easily achieve the desired result. Painting rules :

Choosing a surface to paint. It is better to choose a small area outdoors and cover it with paper. Paint your shoes away from children.
Before painting, read the instructions for use. Do not neglect the instructions and follow the indicated points.
Depending on the type of paint, you can apply it with a brush, sponge, or brush. Usually a brush is included.
Use gloves to avoid damaging the skin of your hands.
Any paint must be applied evenly, in a thin layer. The main thing is not to rush and do everything carefully.
After dyeing, carefully review the surface of the shoe so as not to miss unpainted areas.
Remember! The paint has a very pungent odor. And if you are painting indoors, then ventilate it well.

No. 4. We consolidate the result

After painting the shoes, evaluate what you have done: if the color is uneven, it is better to go over the surface with paint again. If you hit the mark the first time, then to consolidate the work done, leave the shoes to completely absorb and dry the paint for a day.

No. 5. Painting suede shoes

We buy suede shoes because they look impressive and luxurious. But even suede shoes do not last forever and lose their properties over time, without reviving the color with dyeing. Guided by the above rules, you can safely start painting :

We buy special paint for suede. It is usually sold in spray form.
Don't forget to wear gloves. And we begin to spray the paint evenly over the surface.
Pay special attention to areas that have become shiny or worn over time. For dense painting it is better to use a brush.

No. 6. How to paint nubuck shoes?

Another popular and elite type of genuine leather is nubuck. Shoes made from this material are lightweight, but nevertheless strong and durable. To maintain quality at a level, you need to carefully care for such material. Painting nubuck is entirely similar to the process of painting suede. The only caveat is that do not spray paint close to the surface. The color may turn out unnatural or even patchy.

No. 7. Do we dye natural and synthetic leather correctly?

Shoes made from natural and synthetic leather are easier to paint. The paint applies more smoothly to the skin, and the process is simpler. Typically, leather dye is sold in liquid or cream form.

Let's start painting:

Pour the paint from the bottle into a non-metallic container and stir thoroughly until smooth.
The main thing is not to rush and apply the paint evenly. Look into every joint and seam.
Leather shoes are painted in one dense layer, so carefully and carefully treat the surfaces without streaks.
For the most effective result, you can repeat the painting after a couple of hours.
When the paint is completely dry, apply a fixing agent, it can be: oil, cream or spray.

Painting sneakers made of leather and leatherette

Products made from such materials are easy to paint because their surface is smooth, the paint is distributed evenly, and as a result everything looks very neat. What paint to paint your sneakers is up to everyone to decide for themselves. Leather dye is sold in cream or liquid form. To obtain an ideal result, it is recommended to pour the dye into a separate container, which will allow the composition to be mixed evenly. The main condition is that the coloring agent must be applied in one step to avoid streaks. After drying, if necessary, the procedure can be repeated.

Many people are interested in how to paint white sneakers.

Instructions for painting suede and nubuck products

By purchasing a set of paints for suede, nubuck and aniline leather TM Kolorstar, you can easily paint any clothes, shoes and other products at home:

Prepare the surface for painting! Preparation before painting suede and nubuck items is very important!! The only reason why the paint may not adhere, or may adhere and then peel off, is contamination (intermediary) that interferes with adhesion, that is, adhesion. Such intermediaries can be fats (creams, cream paints) and silicone-containing impregnations or care products. Fats are most often found on shoes; they can be removed with ordinary laundry soap and a stiff brush. Silicone can be removed from the material with anti-silicone. Silicone is most often found on auto leather, furniture leather, and shoes.

1) Cleaning. The product is cleaned using a special cleaner that comes in the package. We take a regular suede brush and remove dry particles and dirt, if any. Then we begin cleansing, apply to a sponge, lather and wipe the surface. Dry with a hairdryer.

2) Application. Spray or apply to dry, painted product. Let it dry on its own. Complete drying - 24 hours. Use a hair dryer for quick drying.

3) Painting. Painting should be carried out in a well-ventilated area or outdoors. Before painting, shake the bottle of paint well to ensure uniform distribution of the coloring pigment because if you stand for a long time without moving, the coloring pigment can settle down. First try to do a test painting on an inconspicuous area of the material. The number of layers applied depends on the original color of the surface. The interval between application of layers is 1 hour (depending on the ambient temperature). Paint at a temperature not lower than +15 degrees C. Painting can be done in different ways, depending on the size and texture of the product: with a brush, sponge, airbrush, spray gun. Apply the first layer and let it dry on its own. When applying one layer of paint, the surface is considered renewed, and two or more layers are considered normally painted. The interval between application of layers should not be less than 15-20 minutes. You can apply up to 4 layers of paint depending on the color intensity. The paint should dry naturally. Apply paint to a surface that is similar in color!

4) Consolidation. In order for the paint to be evenly distributed and fixed, you need to treat the surface with a special fixative. After it, the paint does not fade, does not give streaks, and does not wear off during daily household cleaning and bad weather. It also doubles the properties of the paint itself, especially wear resistance and water-repellent effect!!

We advise and help in choosing the right shade, and also work with specific color samples where it is really difficult to choose the right tone!

Working with samples and creating a color that is not in the catalog is an additional service, as it requires a lot of time, skill, patience and additional materials. Matching the color of the sample is 80-90% good and 90-100% excellent. The cost of the service is 250 UAH for each sample, but if it is still not possible to make the desired shade (this happens extremely rarely), we return half the cost of the service.

Wet cleaning

This cleaning method is carried out using special products that are designed to remove various stains.
In stores you can find shampoos, foams and other products aimed at cleaning nubuck fabric. When using these substances, you should follow the instructions in the instructions.

Sometimes a situation may arise that there is no special product at hand, and the shoes need to be cleaned. In this case, you can use the means at hand:

Ammonia. This substance allows you to cope with white spots that form due to reagents getting on your shoes. Most often, salt stains occur in the spring, when people begin to actively use sidewalk sprinkles. For cleaning, ammonia is diluted with water in a ratio of 1:4. A sponge is moistened in the resulting solution and the contaminated areas are gently rubbed with it. After cleaning the shoes, let them dry and keep them over steam to straighten the pile. After the procedure, you can apply the appropriate paint and impregnation. Fresh stains can be easily removed with a simple damp cloth. The main thing is not to press too hard so that the material does not get wet;
Vinegar. Vinegar works well on salt and dirt stains. You will need 1 teaspoon of product and 1 liter of cool water. Everything is mixed, and a cotton pad is soaked in the solution. The dirty area is thoroughly cleaned. After this, the shoes are dried and the pile is combed;
Salt. This product allows you to remove greasy stains. Pollution is awakened with a pinch of salt. Using a sponge, lightly rub the product into the stain. The salt should be changed several times during the cleaning process. After processing, all residues are removed with a damp cloth, and the product is left to dry completely. If nubuck shoes are white, you can use chalk or talc;
Stale bread. Simple stains can be easily removed with a crust of bread. The crust acts as a brush. Therefore, the bread should be dry and stale;
Solvents. Stains left by vegetable oil can be removed with organic solvents. These include: gasoline, alcohol, kerosene, turpentine and ammonia. The selected substance is tested on a small area of fabric to check its interaction with the material. For cleaning, a weakly concentrated solution is prepared. A cotton swab is moistened in the selected solution. Use gentle circular movements to treat the stain. The product is left on the dirt for a while and then removed with a damp cloth;
Coffee grounds. This method is only suitable for dark products. Coffee grounds are rubbed into the contaminated area and left for about five minutes. Using a sponge, dirt is removed. All residues are wiped off with a damp cloth. This method not only gets rid of stains, but can also paint worn areas.

Is it possible and how to paint nubuck shoes?

Nubuck is capricious and requires constant care, and this should be done as soon as you buy the shoes. The first thing they do is apply (aerosol spray) a special product, and then every evening they apply a coating of a substance with water-repellent properties - then they will be much easier to clean. Apply the substances only after the shoes are thoroughly dry. It’s better not to wear it in the rain; you can’t dry it near heating devices - it will warp and deprive it of softness.

If you haven’t looked after them properly, whether abrasions have appeared, then the question becomes urgent - how to paint nubuck shoes, which can be solved in different ways:

application of paint. Apply according to the attached instructions, having previously cleaned the surface of dried dirt and dust. The greasy film is removed with a special eraser (rubber), then allowed to dry and a coloring agent is applied, after which a layer of protective agent is applied;

application of impregnation. In general, it should be used every time after cleaning, because impregnation allows you to maintain the elastic softness and pleasant velvety feel of your shoes. When using an aerosol can, you should remember that if the spray is close to the surface, the shade will be saturated and will stand out as unnatural.

What else should you pay attention to when painting? It is necessary to select (especially carefully) the color shade, otherwise the tonality of the coating will become uneven.

When and why should you paint your shoes?

For such a demanding material as nubuck, you need to start caring for it even before wearing it. Before going outside, shoes must be treated with a water-repellent spray. In certain cases, to consolidate the result, impregnation is repeated. The decision to resort to painting nubuck shoes is made when:

abrasions appear;
the surface of the skin is damaged;
shoes are scratched;
faded color.

You will also need paint if you intend to completely or partially change the color.

Choosing a paint product

The paint is selected taking into account the material of the shoe and the purpose of use (full painting, touch-up). It is worth mentioning right away that painting shoes will not completely hide all defects. Rough nubuck material requires special care. To process it, special paints are used to penetrate evenly into the pile. Periodically, nubuck boots need to be tinted to eliminate unevenly colored areas.

This is interesting: painting leatherette. Paint for suede shoes can be divided into 2 types:

For complete coloring. Designed for professional painting. It is mainly used when the owner decides to completely change the existing color. The basis of these paints is alcohol, which promotes deep penetration of pigments into nubuck. After the procedure, the pile does not lose its velvety quality, does not deform, or roll down.
Light colors. They are used to refresh color or tone. They are produced in the form of liquid creams, poured into tubes, cans or bottles. Effectively copes with small spots, retouching which preserves a uniform color for a long time. Such paints have a gentle effect on the structure of the pile, are resistant to environmental influences, and do not wear out with constant wear.

Cleaning products are divided into:

cream. Such cream paints, along with decorative ones, also perform a protective function. Contains water-repellent ingredients. These substances create a film on the surface of nubuck that protects it from moisture;
sprays. They consist of a special composition, which contains components that provide lasting color and help restore the structure of nubuck. The spray improves the color shade of shoes;
liquid based dyes. Used for all types of leather and textiles. The liquid texture ensures penetration deep into the material, which allows you to fully restore color.

General recommendations for choosing paint are as follows:

before painting nubuck shoes, you need the paint to be as similar in color as the shoes or a little darker;
thin, light shoe material is best treated with aerosol products, and the pile is treated with cream paint;
If you need to apply a pattern to your shoes, it is better to use acrylic paints. They are waterproof and stain resistant.

Water-repellent impregnations can be applied to products of any color and type. They keep nubuck soft, flexible, and protect it from getting wet. In the rainy season, such impregnations are most relevant.

Painting stages

After selecting the right paint, you can start updating your favorite shoes at home. Before you paint the nubuck, you need to prepare everything. The first step is to thoroughly clean the shoe surface. Dust must be completely removed with a dry brush. Serious dirt can be removed using a cleaner. It is diluted in a small amount of warm water, and the contaminated part of the shoe is wiped with a cloth soaked in the solution. A double-sided brush with a rubber coating on one side and a fleecy coating on the other will also help in this matter. When dirt is removed with a damp sponge, this is done some time before painting, since the material must dry thoroughly. Do not use any devices such as a hair dryer, battery or dryer. It is highly undesirable to skimp on paint products, and also not to use paint that is not intended for nubuck. The next stage is the actual coloring. The first step is to study the instructions for using the dye. There will be information on how to dilute it and how much liquid to use. After this, you should prepare a place, it’s good if it’s in the fresh air, if indoors, then you need to make sure it’s well ventilated. It is advisable to cover the work area with paper or cellophane, this will prevent the formation of stains. Hands are protected with gloves. The product is applied to the surface of the skin by spraying (if it is a spray) or with a special brush in the case of liquid paint or cream. The spray is applied from a distance of 30-35 centimeters from the nubuck. To preserve the natural color of the soles and shoe accessories, they are covered with paper or tape. Do not apply excessive amounts of dye in one session. This can cause drips and uneven shades. When painting with a brush, it is important to take your time. After drying, you need to carefully inspect the painted areas so as not to miss small details, recesses and corners. When painting is finished, the surface should be dried naturally (15-20 minutes), if necessary, impregnation can be applied on top. For color saturation, the procedure can be repeated.

This is interesting: dyeing clothes.

Eliminating excess dye

Water-based colored pigments can be easily wiped off with a damp sponge. If the substance has a different base, its residues should be easily removed with ordinary plastic (for example, a bank card). At the end, the treated areas are wiped with a dry cloth. Dye in oil is more difficult to wipe off. In this case, you will need baby oil. The cotton wool is moistened with it and the required area is wiped. Afterwards, wipe the area with a dry cloth until the desired result is obtained. When applying baby oil, do not rub it vigorously into the shoe surface. After all actions, boots or shoes are washed with a solution of soapy water to completely remove any remaining paint and oil. You can complete the cleaning with conditioner.

How to paint soles and heels: instructions, list of products

Restoring the soles and painting the heels is best done before you paint the leather or suede on the shoes.

Instructions:

Take sandpaper with a small grain size and wipe the sole, as well as the heels
It is necessary to remove deep scratches, as well as old paint from the heel
Purchase a special shoe paint directly to paint the soles and heels
Special acrylic paint for shoes is suitable
Using a brush, carefully apply paint to the heel and sole.
After drying, you can begin painting leather or suede.

Paint heels
List of products for painting heels and soles:

Paint for heels and soles Saphir Tani
Paint for heels and welts of shoes KAPS Contour Wax
Wax stick for soles, welts and heels Tarrago Filling Wax
Dye for welts, soles and heels TARRAGO Edge Dressing

Painting

Caring for dyed shoes

Before storing a dyed nubuck product, it is better to place it in a fabric bag and put it in a box.
In winter, after returning from the street, boots must be cleaned of reagents every time. They have a detrimental effect on this material.
It is recommended to systematically use moisture-repellent agents. After application, you need to wait until it is absorbed.
During the warm season, nubuck should be wiped off dust as often as possible with a damp cloth.
To remove dust and dried dirt, it is recommended to use a steam generator. After the procedure, the top is wiped with a cotton pad.
Under no circumstances should you dry nubuck on a radiator. Everything should dry naturally or at room temperature. Crumpled newspapers will help absorb excess moisture inside the product.

Preparing shoes

Sneakers should be thoroughly washed to remove dust, remove dirt, and remove any remaining shoe polish and wax. Then you need to degrease the entire surface or individual areas to be restored. Special cleaners will help you cope with these procedures efficiently and quickly, but you can also use improvised materials. For example, a solution of laundry soap with the addition of ammonia will replace a store-bought product. Shoes should be dried well naturally, avoiding electric heating devices.

Features of painting nubuck shoes

Painting yourself has several advantages. Such actions will not only help update your appearance, but also significantly save personal finances. Modern specialized companies provide a range of similar services. The disadvantage of this treatment is the high cost of the procedure. Therefore, doing it yourself will help you save money.

When preparing before carrying out the process, there are several nuances to consider. An important step is the correct selection of paint, or, more precisely, its shade. The surface of the product itself should also be prepared: thoroughly cleaned of dirt and degreased. For full results, it is necessary to follow all actions in strict sequence. If the procedure is carried out correctly, the final result will be of high quality.

Painting the sole

The sole of any shoe is most susceptible to damage. In sneakers, this is usually the most solid and high-quality part; only over time, the design can suffer significantly. But there are no problems here either, you just need to know how to paint the sole of your sneakers. Just like the upper part, it is possible to restore it completely (or some fragments). The paint is sold in stores in various colors. Numerous owners of sports shoes use automotive aerosol paints to paint the soles. The painting process and preparation is similar to the upper part of the shoe.

Maybe someone has their own recipe, but this article discusses the best options for how to paint sneakers.

How to paint nubuck

An important point in dyeing shoes yourself is the correct selection of the composition. For work, it is recommended to choose paint designed specifically for this material. Manufacturers offer a wide range, among which it is sometimes difficult to make the right choice.

In order to provide nubuck shoes with additional protection, you should use a product such as an activator liquid. It will be useful not only in updating the color. This composition helps create a water-repellent layer that protects products from aggressive moisture. This will allow you to use the shoes in wet weather.

Reference! When purchasing, you should pay special attention to the presence of this impregnation, since it is not present in every composition.

The color palette is of particular importance. To update and maintain the natural shade, you should select a product in accordance with the original tone of the shoe itself.

How to paint nubuck shoes

First of all, shoes or boots should be prepared for painting. To do this, the surface is thoroughly cleaned of visible and stubborn dirt, dust and stains.

Advice! A special double-sided brush with a rubber and soft fleecy coating will help with cleaning.

Recommendations:

After cleaning, shoes should be dried naturally. It is important to avoid exposure to heating devices, as they have a negative effect on the material.
It is advisable to carry out all work in the fresh air, as the paint has a strong odor.
To avoid the appearance of streaks and stains, the floor covering is covered with newspapers or paper.
The composition is applied in accordance with the attached instructions.
In case of significant damage, application of several layers is recommended. For a high-quality result, each layer must dry thoroughly.

Attention! When performing the procedure at home, you should open the windows to provide fresh air. For additional protection, a respirator is useful.

To remove paint stains from the surface of the sole or heel, a clean flannel rag is suitable. After completing the procedure, the shoes must be dried naturally for several hours.

Nubuck shoes are particularly attractive and charming. Long-term use and aggressive environmental influences cause significant damage to the material, which causes the loss of its natural shade. Several methods will help you paint and renew your products yourself.

Cute DIY patchwork quilt

What are reinforced threads?