Washing machine door won't open

Receive one of the most read articles by email once a day. Join us on Facebook and VKontakte.

As long as the washing machine is in washing mode, its door will be locked. This option is provided by manufacturers of washing equipment intentionally and is necessary in order to avoid various unpleasant accidents with spilling a large amount of water on the floor and subsequent failure of the entire drum of the washing machine. The hatch unlocks automatically when the selected washing program ends. Of course, there are situations when the wash is completed, but the hatch remains blocked for one reason or another.

It is important to understand that when the machine ends a washing program, it does not end the program. First, the device goes into diagnostic mode, which takes 3-5 minutes. Only after its completion the “automatic machine” gives the corresponding sound signal, and with it a command to open the door. The door may not open automatically due to a power outage, water not draining from the drum, a broken locking device, or a broken handle. It is best to call a professional in such a situation, but there are some things you can do yourself.

Open by de-energizing

Sometimes the machine malfunctions and you can open the door by simply turning off the power. We disconnect the unit from electricity, and then turn it on again. It is recommended to wait 1-2 minutes between removing and putting the plug back into the socket. If this does not help right away, then you can also try again turning on some “fast” mode, for example, spin. Most likely, upon completion, the door will open.

Mechanical breakdowns

When these actions are unsuccessful, it is not normal failures that should be diagnosed, but mechanical damage. The locking mechanism or handle is probably worn out and needs to be completely replaced.

It happens that children hang on an open hatch and begin to swing. Such entertainment causes the loading door hinges to bend. The element stops closing or opening normally, and the mechanical latch often jams.

In this case, it is recommended to change the hinges or the lock itself. To change the locking mechanism, you have to remove the top panel of the washing machine, find the locking element, and open the latch. The lock mechanism will immediately unlock. After the hatch allows penetration into the drum, the blocker is changed.

With loops the situation is somewhat more complicated. If you do not have the necessary skills, then it is recommended to invite a specialist to perform such work, who will promptly correct the breakdown.

Open with cord

This method should only be used in situations where it is known for sure that the door will not open due to a broken handle. To save the laundry you will need a cord or rope with a diameter that will exceed the diameter of the loading hatch.

The rope is placed in the gap between the side of the machine and the lid. If necessary, you need to use a screwdriver to push the rope deeper into the gap. This should be done along the entire diameter. Afterwards, you need to firmly but gently pull the ends towards you. The door should open.

5th method. Installing a new battery

This method of opening car doors without keys is used when the battery is low or there is no power in the car, which makes it impossible to open the car door using the central locking. Also in cases where the locks do not work or are frozen.

So how to open a jammed front door lock? You need to get to the hood lock cable, which most often goes from the hood lock to the left fender, and then into the car interior. Then we hook the cable with a wire near the left headlight or radiator and pull it with a sharp movement. It is necessary to place the battery near the car in advance. Then we connect the battery and use the key to open the car.

Emergency opening

Most modern washing machines have a special cable for emergency opening of the hatch (yes, the creators have provided for this possibility). As a rule, it is located somewhere in the area of the bottom panel and is painted in a bright color. All you need to do is get to the cable and pull it.

Important: if there is water left in the drum, you should place some container under the hatch in advance!

Did you like the article? Then support us, click

Home » BEKO

Does your BEKO washing machine door not open after washing? Why and what to do? Contact our company. We will find the reason! We will repair your washing machine at home and fix the problem. We work seven days a week in Moscow and the Moscow region.

Free visit of a technician to your home + diagnostics (for repairs)

If your BEKO washing machine does not open, then you should immediately seek help from a qualified technician. It is worth noting that only he can give the correct answer as to why the washing machine behaves this way.

Top loading washing machine

Unpleasant moments also happen with such models. Most often the drum is locked in them. This happens when cranking is done open. In order for the machine to start working again, you must:

move the washing machine away from the wall,
disconnect all connected communications,
on the back wall, determine the installation location of the heating element, disconnect and remove it,
spin the drum by hand.

The hatch in a top-loading washing machine opens in almost the same way as in models with a front door. They turn off the machine, then try to start one of the programs again.

The main reasons for the malfunction

Experts advise all people to use the following tips and recommendations:

» If there is no water in the drum and the BEKO washing machine does not open, then you should wait a certain time. This may mean that the washing machine has not completed a full wash cycle.
“If the door still does not open, then experts recommend disconnecting the equipment directly from the electrical network. On average, about thirty minutes is enough, but provided that the equipment is disconnected from the power supply.
» The main reason for the hatch blocking is a malfunction in the control board area.

The main reasons for such a malfunction will definitely be explained and installed by a highly qualified technician. Today, such a service can be ordered at any specialized service center, because this is how you can count on high-quality equipment repairs. Experts under no circumstances recommend that a person use physical force to open washing equipment if the BEKO washing machine does not open. Thus, the internal parts of the door or hatch can be damaged, so you will have to spend money on purchasing new parts.

The technician will definitely find out the cause and eliminate it as soon as possible. A large number of clients have already been able to appreciate all the advantages and benefits of such a repair. Craftsmen who work in highly specialized service centers provide all their clients with a guarantee of high-quality work.

Washing machines lock the door during washing to prevent water leakage. At the end of the work, a signal is heard - the process is completed, the door can be opened. If this does not happen, the machine mechanism is damaged. In this case, you can figure out the problem yourself; a consistent search of the causes will reveal the correct one.

Emergency "opening"

It often happens that a Siemens machine stops working while executing a program and “freezes” with a drum full of water. Then the door will not open, the “brain” will block the lock to ensure the tightness of the system. First of all, restart the washer. Turn off the equipment, reactivate it and set the “Drain” mode. Wait until the machine finishes the program and try to open the door again.

Check the drain hose to see if it is clogged. When this is really the case, clean the corrugation. Then reconnect the “sleeve” and run the spin or drain option again. Sometimes a Siemens washing machine does not respond to requests at all - it does not allow you to start the mode for draining water. Then you will have to empty the tank manually by unscrewing the waste filter plug. You should proceed like this:

prepare a large container;
cover the floor around the washing machine with dry rags;
tilt the machine slightly back, place a basin under the body, at the location of the filter;
open the technical hatch, find the “trash can” plug;
grab the cover and unscrew the element;
Collect any water that comes out of the machine.

After this, you can try to open the door. To open a Siemens washing machine, you will need a thin rope and a small knife. You need to do the following:

attach the rope to the washer door, in the area of the locking device;
use the tip of a knife to push the lace inside;
grab both ends of the rope and pull it tight;
slightly move the lace up and down until you hear the characteristic click of the lock “activating”;
open the hatch.

If the door does not open using a rope, you can try another, more sophisticated method. Turn off the power to the washer and unscrew a couple of screws on the top panel of the case. Remove the cover, slightly tilt the machine back and try to reach the locking device with your hand through the hole between the tank and the front wall. Once you find the “tab”, slide it. The lock will work and the machine will open.

Causes

The first thing you should not do if the washing machine does not open after washing is to use physical force. In this case, the hatch will be damaged, and the door is unlikely to yield to efforts. Before contacting a technician, you should exclude obvious factors that influence why the hatch is jammed.

Water in tank

The main purpose of the locking mechanism is to protect against water pouring out of the washing machine drum. That is why the hatch is securely closed at all stages of washing. If the drainage system does not work well, water will remain in the tank. In this case, it is necessary to lure the pump (pump), this problem may arise due to a blockage or an initial defect. Pump wear is affected by water hardness, powder quality and washing frequency.

Sometimes water may not drain due to a breakdown of the pressure switch - the water level sensor. The machine believes that the tank is empty, the drain does not occur - the door remains locked. New washing machine models have a separate “water drain” function. This problem is especially common in Samsung models.

Timed out

The machine immediately signals the end of the wash, but the door may remain closed for some time. A few minutes after washing are allotted to complete all processes correctly. After 2-3 minutes, the door will unlock automatically. Of course, on some models the hatch opens immediately after the signal, but it won’t hurt to wait at least 30-40 seconds.

If you urgently need to stop work, but there is no need to remove or put in laundry, you can simply click on “Pause”. This will pause the operation; you will not have to open the door with physical force. Then, by clicking on the same button, you can resume the process.

Lack of light

An annoying situation familiar to many: there were only a few minutes left before the wash was completed when the electricity went out. It will not be possible to open the washing machine door until it is resumed - the locking mechanism is broken. If the light is expected soon, it is better to just wait.

Features of unlocking by machine of other brands

Samsung. If this machine does not open the hatch after five minutes, it must be turned off and wait about a third of an hour. At this time, the set program is completely reset, and the locking mechanism can open automatically. When the wash is completed and there is water in the drum, it is recommended to activate the spin process. Water that does not drain is a sign of a problem with the pump or hose responsible for draining. You will have to use the emergency option - there is a hose near the drain filter, which is used in case of accidents. As soon as the water recedes, the lock will open. Note that the manufacturer has provided a special cable that allows you to force the door to open.
Samsung Eco Bubble. This machine is childproof, and any user who has not thoroughly studied the instructions may accidentally activate it. In this case, at the end of the washing process, the hatch will not open; a lock and a smile will appear on the screen. In this case, you will have to press two buttons located on each edge of the drawn human figure.

Ariston Hotpoint. The manufacturer clarifies that a similar situation with the hatch occurs after an emergency power outage. To fix the problem, you will have to drain the water, working in manual mode, open the hatch by pulling the emergency cable. All options are located below, near the drain filter. There are several other options to open the hatch on this model. Having selected the Baby or “low ironing” mode, after the process is completed, the washing machine rotates the drum at a slow pace. You will have to press the start/pause key, or activate the “easy ironing” function. Having determined the “silk” mode, the washing unit will finish working without pouring out the water. To perform this action, press the start button. These features are provided by the manufacturer and represent the distinctive features of the washing machine.

It should be noted that each washing machine has a special cable designed for unforeseen situations. As a rule, it is located below, near the drain filter, and is colored reddish or orange.

It must be pulled carefully, without strong jerks, so that the loading hatch is forcibly unlocked

How to unlock

If you need to open the washing machine immediately, even if it’s an emergency, you can use one of the known methods. Manufacturers indicate them in the instructions - the procedure depends on the specific model. However, there are several basic techniques for unlocking a lock.

Before you begin repairing your washing machine yourself, you should familiarize yourself with the following recommendations:

Before any manipulations with a locked door, you need to unplug the machine from the outlet.
Make sure there is no water in the drum. If necessary, drain it through the filter.
If the indicator shows the presence of water in the tank, and the wash is completed, you need to click on “Drain water”.
If an unfamiliar code appears on the indicator, you need to find the instructions and look at its designation.
If the board or any control element is burnt out, you do not need to figure it out yourself. Only an experienced technician will be able to get the device working.
If the pump works even in the absence of water, you just need to unplug the washing machine and call a technician.

The lock is not removed at the end of the program

Automatic door locking while the program is running is a protective measure programmed into the “brain” of the washing machine. The automatic machine will never open immediately after washing; be sure to wait a few minutes after the end of the process . This is a safety standard applied by all manufacturers.

A failure may occur due to a disruption in the execution of the program due to voltage fluctuations in the electrical network or a blackout, even for a few seconds. In this situation, it will be enough to turn off the machine, wait half an hour and turn the machine on again. In 30 minutes, the user settings will be reset and the door will unlock automatically. However, this method can only be used if there is no water in the tank. If the machine is full, you will have to choose a different course of action.

How to avoid the problem

Often the cause of a broken door lock is careless handling of the washing machine. You need to choose the right operating modes, correctly calculate the weight of the laundry and use high-quality powder. Before turning it on for the first time, be sure to read the instructions and start the washing machine only according to it.

The washing machine door locking after finishing washing is a common problem. The reasons for it are varied, from a jammed latch to burnt electronics. Self-repair and diagnostics are only permissible in case of mechanical problems. In this case, you can try different methods by first studying the instructions for a specific model.

Prevention measures

In order to avoid problems with the door, you must adhere to preventive measures:

Do not allow items of clothing from the drum to fall into the lock when closing the door.
The drum should not be filled to capacity. In this case, increased load will be placed on all elements of the washing machine. In addition, the likelihood of laundry getting caught in the lock increases.
The washing machine should be used in conditions without voltage surges. If the voltage in the network is not stable, it is necessary to connect the equipment through a stabilizer.
If the hatch handle does not work perfectly and does not press the lock mechanism properly, the washing machine needs repairs before it completely jams.

Blocking and its removal

Let's take a closer look at the unlocking features on various models:

On Indesit brand devices (in most cases, WISL 82 models), the flickering light of the lock indicates that the wash mode without spin is turned on. Some owners accidentally select this option and mistake this signal for a malfunction. To eliminate the problem, you should disable the “spin exclusion” by pressing the appropriate menu button.

If you cannot unlock the door of the Indesit WIU 80 machine, this indicates a serious malfunction. In this case, you need to call a repairman.
The Indesit WISL 103 device, which has problems with the electrical module of the hatch or the water temperature sensor, indicates this with a lock indicator and an error code KEY3 or KEY4. To troubleshoot the problem, contact a workshop.
Indesit WIUN 102 devices indicate with a “block” indicator that the water supply valve is broken or that there is a dilemma with the pressure switch and control board. Only a master will be able to unlock a device that has become “depressed.”
Bosch devices, model LOGIXX 8 SENSITIVE, have a manual mode for emergency opening of the hatch. To unlock, remove the bottom panel of the device and very firmly pull the cable located behind it.
You can disable the lock on the Bosch unit model WAS 20443 by holding down the “stop/pause” button located on the right side of the panel.
You can unlock the lock on the Bosch MAX 5 washing machine by installing it on the program with which the wash was started. Then, after waiting until the lock indicator lights up continuously, you need to press and hold the “delayed start” button for 5 seconds.
On Samsung SENSOR COMPACT f015j machines, a breakdown of the electrical unit or wear of the hatch lock manifests itself as a “door” error indication and a stop during the washing process. After a few minutes of standstill, the device can continue operation, but this situation will repeat until the lock is replaced or the wiring fault is eliminated. You should call a specialist.
In the Samsung DIAMOND washing machine, the door does not open if the drain pump is not working properly. To gain access to the laundry, you will have to drain the water manually and wait a couple of minutes, then hold down the “start/start” button for a long time.
Tips on how to unblock an Ariston washing machine, not counting the general techniques listed, indicate the need to inspect the drain filter. The machine, like the Bosch, will not open if the water is not completely drained due to a blockage.

READ Washing machine indesit bwsb 50851 errors

The lights on the washing machine are flashing

The activation of the door lock only and the flashing of the indication without launching any program on the Indesit, Bosch, Ariston, Samsung or Siemens washing machine indicates a hardware error. The device requires qualified diagnostics.

If an attempt to remove the door lock using simple methods is unsuccessful, you should proceed to manual unlocking if the car is not under warranty, since such an intervention may cost the owner refusal of warranty service and free repair of the equipment.

Recommendations from professionals

There is no natural way to open the door when the locking mechanism is broken, because the door is automatically locked. Here it will take a lot of time and effort to perform a natural opening using additional devices. Most often, this method is used for front-loading machines, where the latch moves to the side when activated.

To avoid causing damage to the laundry washing unit, it is recommended to call a professional. It will perform the following manipulations:

take a strong cord or thread,
inserts them into the space of the door and body,
the thread clings to the hook of the locking device,
Now all that remains is to carefully pull the thread.

All actions must be carried out as carefully as possible; with their help, the lock will come out of the grooves and the loading door will unlock.

There is a more universal way to open the machine door, but to do it you will have to remove the top panel by unscrewing a couple of bolts.

The machine tilts back a little, which causes the drum to tilt and gives access to the locking mechanism. Use a finger or a screwdriver to press the hook. It will unlock. Now you can take things out. But here it is necessary to remember one feature. Further operation of the machine is prohibited; a specialist should be called to fix the problem.

Door locked due to power outage

If the washing machine door does not open after there was a power surge in the house or the lights were turned off completely, then do not be upset. This situation happens quite often, and manufacturers have provided the ability to protect you in the event of a power outage.

Imagine that your lights were turned off, you didn’t notice it and thought that the washing machine had simply finished the program. The consequences of opening the hatch in such a situation can be quite unpleasant and dangerous: water will pour out on you, or when the power is supplied, a new wash cycle will begin, and at this time you are unloading the laundry.

In order for the door to open, you need to restart some program after the power supply is restored : you can simply start a spin cycle or drain the water.

After this procedure, the hatch will be unlocked.