Any thing gets dirty sooner or later, it doesn’t matter whether it’s a dress or a mink coat. It is quite easy to deal with dirt on a dress, but to clean a mink at home, you will have to put in more effort and ingenuity. Of course, you can always just take your fur coat to the dry cleaner, but there is a high probability that the product will be damaged there, and the cost of such a service is not cheap. Therefore, in most cases, fur cleaning can be done at home using simple products. The most important thing is accuracy and strict adherence to the instructions, because any fur product requires careful handling.
What product is available for cleaning mink fur?
Nowadays, fur cleaner can be purchased at any household chemical store. These are basically sprays that are very convenient to apply to the fur. After this, the product is applied and left for a few minutes to absorb. Next, the fur is combed out. These products mainly contain essential oils and animal fats. They restore shine and make products beautiful.
Review of fur cleaning products:
- INSAF. One of the most popular remedies. It prevents the appearance of tangles and the undercoat becoming tangled. Quickly copes with grease and fat.
- LIVAL LICKER KONZ. Allows you to quickly put your fur coat in order. There are substances with a tinting effect. Contains plant essential oils that add shine.
- FUR FRESH SALAMANDER. A popular product that can be used to restore shine to a product and get rid of tangles. Tints the pile.
- TERRE DE SOMMIERES POWDER. This substance is best used for targeted cleaning. This is a powder that will help get rid of stains. It is rubbed into the fur and then shaken off.
- ULTRA FINISH MILK. The substance is intended for cleaning fur products of any color. Returns shine and prevents fibers from sticking together.
What product is available for cleaning mink fur?
Wet methods for removing yellowness
In addition to dry methods of combating yellowing of fur, there are wet methods. They involve the use of products prepared on the basis of active liquid ingredients. After such cleaning, the fur product should be dried or cleaned of the applied product with a damp sponge moistened with running water.
It is necessary to dry the product only naturally, by hanging it on hangers or on stands. Drying near radiators, other heat sources or ironing should be completely avoided, as such exposure can damage the fur.
Hydrogen peroxide and ammonia
You can quickly and effectively remove yellowness from white mink fur using a mixture of hydrogen peroxide and ammonia. To prepare the product, you need to make a solution of 1 teaspoon of a 3% solution of hydrogen peroxide and 1 glass of water. Add 3-5 drops of ammonia to the resulting liquid, mix everything thoroughly.
Apply the bleach liquid to the fur carefully, using cotton balls. After processing, the product is combed and dried in the fresh air. You can hang the product on the balcony; if it is glazed, the window should be opened slightly.
Soap solution
There are several ways to clean white fur from yellow plaque using soap solutions. Each of them has its own characteristics.
- You can use pet shampoo as a cleaning agent. These products contain a blue pigment that completely neutralizes the yellow tint. The basin is filled with warm water, and a small amount of pet shampoo is dissolved in it. To enhance the effect, you can add 2 tablespoons of hydrogen peroxide to the solution. The fur product must be carefully treated with a sponge soaked in the prepared product. The sponge should be guided in the direction of the pile. After the procedure, the fur is washed with a damp cloth and dried.
- If the yellow tint is unsaturated, you can deal with it using regular liquid soap. The detergent should be white or clear. Add 3 drops of liquid soap to a bowl of water and thoroughly foam the water. A clean sponge is soaked in a soapy solution and wrung out. The pile is wiped several times with a damp sponge, combed and dried.
Liquid soap can be replaced with shampoo or shower gel, which does not contain a coloring pigment.
Blue
In this way, not only natural fur, but also artificial fur can be cleaned. This product must be used very carefully, as its excess can lead to the appearance of a purple tint on the pile.
A small amount of blue is dissolved in a basin so that the liquid acquires a pale blue tint. The resulting composition is poured into a spray bottle. The product is sprayed in an even layer over the entire fur product. The applied solution does not require rinsing. After processing, the fur is dried and then carefully combed.
Alcohol and salt
To prepare the bleaching liquid, dissolve 1 teaspoon of fine salt in a glass of warm water. Add 1 teaspoon of ammonia to the saline solution, mix everything and use it for cleansing.
- The sponge is moistened in an alcohol solution, and then the entire yellowed surface is treated with it.
- The product is dried in the fresh air so that the smell of ammonia completely disappears.
- The procedure is completed by combing the lint.
When removing a weak yellow tint, you can avoid using ammonia by treating the pile with a saline solution.
Vinegar with lemon juice
This product effectively removes yellow stains on the pile. It should be used spot-on, avoiding processing the entire fur product. To prepare the product, you need to mix 1 teaspoon of vinegar and the juice of a quarter of a lemon.
A cotton swab is moistened in the prepared liquid, and then all stains that appear are wiped with it. The yellowness is gently rubbed with a brush with soft bristles, and then the fur is dried.
Any described method will quickly and effectively eliminate the yellow tint on a product made from mink fur. These products should be used very carefully, avoiding strong mechanical impact on the pile or its excessive wetting with prepared liquids. Otherwise, the fur may lose the attractiveness of its structure and lose its shine. If, during the cleaning process, the housewife did not calculate the amount of product needed, and the fur product has lost its attractive appearance, you can restore the shine of the pile by wiping it with a 10% glycerin solution.
How to clean a mink coat after winter with alcohol or champagne vodka?
This product is more suitable for cleaning dark fur items. The procedure is quite simple. It is necessary to mix vinegar, vodka and water in equal quantities. After this, a towel or soft brush is soaked in liquid and applied to the product in the direction of hair growth. Next, the product is dried and combed again. This allows you to remove excess fat and add shine to the product.
How to clean a mink coat after winter with alcohol and vodka?
Cleaning a mink coat with talcum powder to prevent vomiting
Talc is an excellent fur cleaner. Its action is based on adsorption abilities. This substance is ideal for removing grease and adding shine.
Instructions:
- Remove vomit with a damp cloth
- Lay the product on the floor and sprinkle dirty and greasy areas with talcum powder
- Rub the powder clockwise, shake off the talc little by little
- After this, add a new portion and rub again
- Rinse out the talc and shake the product well.
Cleaning a mink coat with talcum powder
Cleaning a mink coat with ammonia from milk
There are two ways to clean products with ammonia:
- Alcohol and ammonia. Substances are mixed in equal quantities. The resulting liquid is moistened with a sponge and applied to the fur. Next, the product is dried and combed.
- Ammonia, salt and water. It is necessary to add 40 ml of ammonia and 20 g of salt to 500 ml of water. After this, the mixture is shaken and applied to the fur. After this, the product is dried and combed.
Cleaning a mink coat with ammonia
In what cases should you take a product to dry cleaning?
The most common places for fur coats to become dirty are: sleeves, area around pockets, hem, collar. In these places, the fur deteriorates and takes on a greasy appearance from frequent friction. The above methods of cleaning the product, with the correct dosage of cleaning agents, can eliminate dirt, refresh, fluff the undercoat and give shine to the pile. If cleaning at home is unsuccessful, you should not experiment with mink; the best solution would be to take the coat to a trusted dry cleaner.
The mink coat must be cleaned at the end of the winter season before putting it in the closet. It is necessary to comb the pile thoroughly so that if it gets wet, starch, talc or flour does not stick together in the undercoat. You need to store your coat vertically, straightened out, in a cover, in a dark place, putting a few naphthalene tablets in your pockets to make the fur unattractive to moths. A mink coat will thank its owner for careful care and timely cleaning, keeping her warm during the long frosty winter.
The article has been verified by the editors
Cleaning a mink coat with hair shampoo
This is one of the simplest and most affordable options.
Instructions:
- Add a spoonful of shampoo to warm water and whisk until foam forms.
- Apply a little foam to the sponge and rub into the fur in a circular motion.
- Hang the product on a hanger and wipe with a damp cloth
- Let dry and brush the product with a brush
Cleaning a mink coat with hair shampoo
What is strictly forbidden to do
Cleaning a mink coat, in order to avoid damage to an expensive mink product, must be done using the correct specific methods.
The following actions, which are recommended to be familiar with, will most likely render the fur coat unusable, namely:
- You cannot wash a fur product, this will cause the fur to lose its appearance, and the skin may become rough and dry out;
- After any wet cleaning, you should not dry the fur with a hairdryer or use heaters or a fan for this. When an item gets wet (rain, snow), it will be quite enough to hang it on a hanger or hanger and leave it like that until it dries;
- The use of an iron is also excluded. With its help, it will not be possible to straighten creases or bruises due to improper storage. Here it would also be appropriate to hang it on a hanger or hanger and after a certain time it will straighten out and have its original appearance. We also recommend reading our article on how to smooth fur on a fur coat, read here.
Cleaning a mink coat with gasoline vinegar
The product is suitable for cleaning dark and light fur.
Instructions:
- Apply vinegar to the swab and wipe the product in the direction of lint growth.
- Hang on a hanger and let dry
- After this, the cotton wool is soaked in glycerin and the entire pile is also wiped
- Hang the product on the balcony and let it air out
- Comb with a comb
Cleaning a mink coat with vinegar
Effective methods for cleaning a mink yourself
At home, you can quickly and efficiently use many methods to clean mink fur yourself. But, in any case, you should act very carefully and carefully, because the skins of these animals are capricious things and will not tolerate careless treatment.
- The most common, but no less effective, method of cleaning animal skins is semolina. This method is suitable if the fur coat is dusty from being worn for a long time, or is “tired” from hanging in the closet. We lay out the fur coat on a hard, flat surface, and sprinkle the most contaminated places with dry semolina (usually the dirtiest places are the sleeves, collar and pocket area). Then, with light movements, we imitate normal washing for 30-40 seconds. Shake the product and comb it out using a special brush.
- Cleaning with starch occurs in the same way as cleaning with semolina. The color of the starch will tell you how dirty the fur was. It is worth repeating the cleaning with starch until the shaken off powder remains white - this will serve as proof that there is no more dirt and dust left.
- Hot sand cleaning is also a gentle method of cleaning mink products. To do this, you need to take fine washed sand and heat it in a dry frying pan. Carefully lay out the mink fur product on a flat surface and sprinkle the most contaminated areas with hot sand. Wait until the sand cools down and carefully brush it out with a soft brush. If the sand is not completely combed out, lift the product and shake vigorously several times.
- Another way to renew mink fur at home is to treat it with a brush dipped in gasoline. Gently, pressing lightly, comb in the direction of hair growth. Cleaning with gasoline is dangerous; it should only be done away from fire, in a well-ventilated area. After treatment, be sure to take the product out into the fresh air for several hours to thoroughly ventilate. But, if your fur coat is made of light material, this method will not work, since gasoline gives a yellowish tint.
- Cleaning mink fur with vinegar is also common. A 5% solution of table vinegar is prepared, then a cotton pad is soaked in it, and the product is processed in the direction of growth. The dirt will remain on the disc, and the fur will sparkle with new colors.
- If you need to clean light fur, then instead of vinegar from the previous recipe, use hydrogen peroxide, also 5%. After each treatment, change the disc, and after wetting, be sure to wring it out - if it gets on the skin, the solution can ruin it and cause the formation of bald spots.
- Also, mink fur can be cleaned using ordinary ammonia. To prepare a solution of the required concentration, you need to take 4 tablespoons of water and one tablespoon of alcohol and mix well. Then you can moisten a cotton swab and process according to hair growth. Dry in the open air, never on a radiator or heater.
- To clean serious stains, prepare sawdust from deciduous wood, mix with a small amount of pure gasoline and apply the slurry. After some time, carefully comb out with a soft brush.
- You can also clean mink fur using regular hair shampoo. We dilute it in water, whipping up a thick foam, and then apply this foam using a sponge. Let sit for a few minutes, comb thoroughly and dry.
5 ways to quickly remove unpleasant smell from carpet
How and with what to clean a dark mink coat?
The main task of caring for a mink coat is to give it shine. To do this, you can use a mixture of lard, water and ammonia.
Instructions:
- Dissolve 100 g of rendered pork fat in a liter of boiling water.
- Add 2 ml of ammonia and shake the mixture
- Pour it into a spray bottle and shake the bottle several times
- Apply the solution to the entire fur coat and hang the product on the balcony
- Let the product dry and comb it
How and with what to clean a dark mink coat?
Eliminating odors from fur
It is better to initially try to ensure that the mink is not saturated with unpleasant odors. But sometimes a person accidentally ends up in a smoky room, rides in a car filled with the smell of gasoline, or finds himself in the company of a heavily perfumed lady.
In addition, any cosmetics for daily use have their own perfume characteristics. Lotion, makeup products, lipstick, foundation leave their own flavor options. The fur coat absorbs them quickly and for a long time. Smoke, coffee, tobacco contribute to the overall gamut. Over time, the fur begins to emit unpleasant odors.
A good method to troubleshoot the problem is:
- potato starch;
- semolina;
- medical alcohol;
- flour;
- ammonia;
- vinegar, etc.
Cleaning a mink fur coat from odors in a more gentle way is done by freezing the lint on the balcony in the winter or placing it in the freezer of the refrigerator in other seasons.
Thorough shaking and airing outside is also effective in getting rid of unpleasant odors.
A good remedy is to put special absorbents into pockets.
How and with what to clean a white mink coat?
One of the best ways to clean white fur coats is hydrogen peroxide or sawdust with gasoline.
Instructions:
- Pour purified gasoline over the sawdust and squeeze it out
- Lay the fur coat on the table and sprinkle it with wet sawdust
- Leave until the sawdust is completely dry, shake off the product
- Carefully remove any remaining cleaning product with a brush.
How and with what to clean a white mink coat?
Rules for removing various stains from fur and lining
It often happens that a thrifty housewife manages to preserve the appearance of her fur coat, but the lining of the product wears out and looks unattractive. Fabric restoration can be done in the following way: tear off the lining material and wash it in a washing machine at temperatures up to 40 degrees for silk and polyester.
- Is it possible to clean a mouton fur coat yourself at home?
- Rules for washing coats made of different materials
If there are concerns that it will not be possible to sew the lining in place efficiently and accurately, there is another way. To do this you need:
- make a soap solution/dilute shampoo in water;
- with a sponge, carefully so as not to wet the inside - the back side of the animal’s skin, treat dirt on the hem with foam;
- Wash off the foam with a clean damp cloth, avoiding the formation of streaks;
- Dry the lining at room temperature.
To prevent contamination of the lower part of the lining, it is worth sewing another layer of fabric onto this part. It should be steamed and washed.
Sometimes it is necessary to remove stains from vomit, fatty or sweet foods, and blood from a fur coat. The first step is to remove dirt with a damp towel without wetting the animal’s skin. You shouldn’t delay dealing with stains; old stains are more difficult to remove. Next, the fur should dry on hangers at room temperature away from heat sources. After this, apply talc or semolina to the affected area of the fur coat and rub the product into the pile in a circular motion for several minutes. The substances, due to their abrasive properties, will collect the remains of vomit and blood and eliminate the unpleasant odor. The undercoat is cleaned with a brush and the product is ventilated.
After removing vomit from the fur with a damp towel, ammonia and vinegar are used to completely clean the product in the manner described above. Foam from hair shampoo will cope with the unpleasant odor; for this, the fur is carefully treated with a sponge.
After the fur coat has been soaked in champagne or wine, the product must be dried and combed. If a fur coat requires more thorough cleaning, it is recommended to use ammonia, sawdust with gasoline, or vinegar.
How to clean or wash the lining of a mink coat to remove dirt?
If there is little dirt, then the product is dried, and then the dry dirt is cleaned with a brush.
There are two options for cleaning the lining:
- Rip off the lining. After this, the lining is machine washed on a delicate cycle. After drying, the fabric is ironed and sewn back onto the fur coat.
- No steaming. In this case, there is no need to steam the lining. Prepare a soap solution and apply it to the lining. Try not to let the inner layer of the fur coat become wet. After this, rinse everything off with a damp cloth and pat dry with a clean, white towel. Hang on hangers and let dry.
How to clean or wash the lining of a mink coat?
How to care for mink fur
A mink coat can retain its attractiveness for about 10 years or more if the following care rules are followed:
- Natural mink fur does not react well to moisture. It is better to wear a fur coat on dry, frosty days, and wear a down jacket during rain or snowfall.
- If the fur coat does get wet, it must be dried immediately; you cannot put the wet item in the closet. Clothes are hung on hangers and left in a warm room until completely dry.
- A mink coat should only dry naturally, even if it takes a long time. The product should not be dried with a hairdryer or hung near a radiator or a switched on stove.
- You need to store your mink coat in a special breathable case in a spacious closet. Outerwear should not be in close contact with other things.
If a fur coat gets wet, you need to comb it, wait until it dries completely and only then put it in the closet.
Attention! During the warm period, the fur coat needs to be taken out from time to time to brush and ventilate, this will avoid yellowing and the appearance of an unpleasant odor.
What should you not do with a mink coat when cleaning?
There are many rules for caring for a mink coat.
What not to do:
- Wash a fur coat by completely immersing it in water
- Dry near radiators or fireplaces
- Use an iron or hair dryer to dry
- Light fur coats should not be cleaned with tea leaves
- Dark fur should not be cleaned with hydrogen peroxide.
What should you not do with a mink coat when cleaning?
As you can see, cleaning a fur coat made from natural fur is quite simple. All it takes is a little time and patience.
