Siemens dishwasher error e15 how to reset the error • E-VI.RU

Washing dishes every day is not only not the most pleasant task, it also requires a huge amount of time. This has become the reason for the increased demand for high-quality dishwashers that will effectively cope with their task and help housewives. Many people believe that if a thing is expensive, this means that it is of high quality and will work well for a long time. This is a misconception, since incorrect operation of any product can lead to malfunctions, breakdowns or even destruction.

The average person does not always know how to correct errors that occur in devices and equipment. When you don’t know what to do or what to do, it’s better to seek help from real professionals who will tell you what to do or do the repair work themselves. Expert advice can help you eliminate minor defects yourself. And in Bosch brand machines, if error e15 occurs, you can handle it alone, without additional consultation.

Possible causes and their elimination

Error E15 in a Bosch dishwasher can appear for several reasons. It could be:

malfunction of the dishwasher control unit;
“sticking” of the float of the protective system;
malfunction of the sensor signaling a leak;
clogged filter, drain hose or pipe, pump;
violation of the sealing of 1 of the pipes in the PMM housing;
malfunctions in the operation of the spray arm that washes the dishes.

In addition to the problems that have already been listed, there may be one more problem - exceeding the recommended amount of detergent. This leads to excessive foaming and ultimately to the activation of the Aquastop protection. Let's look at how you can fix the problem by repairing the dishwasher yourself.

Malfunction of the Aquastop system sensor

This is the sensor that the float presses on if there is a liquid leak. If it is faulty, it may not work at all or, on the contrary, it may signal a leak when there is no water in the pan at all. Although this problem is rare, it still happens sometimes.

The sensor is located above the float in the bottom of the PMM (see photo above). To replace it, turn the dishwasher upside down. Unscrew all the screws that secure the bottom to the body and open it slightly. Do not try to open the bottom completely, as the Aquastop system sensor is attached to it .

Replace the faulty sensor with a new one and reassemble the unit in reverse order.

Decoding error code E15

Modern dishwashers can diagnose their own systems without the help of others. When any breakdown occurs, the PMM displays a specific error code on the screen. This solution allows specialists to correct deficiencies more quickly, without wasting time on diagnostics.

So, if there is an E15 error in a Bosch dishwasher and the faucet is on fire, this means that the Aquastop protective system has tripped. In this case, the dishwasher stops working. What is this system? It informs that water has leaked into the PMM pan.

Aquastop is simple and effective in operation. The bottom of the PMM is inclined; a float is located in its lower part. As water enters the pan, the float rises. As it rises, it puts pressure on the sensor, which triggers and transmits information to the control unit (further also referred to as the ECU) about the problem.

The ECU commands the safety valve built into the inlet hose to shut off the water supply (see diagram). The drain pump (hereinafter referred to as the pump) is immediately turned on to pump water out of the dishwasher. This protection is so severe that it eliminates the possibility of flooding of housing.

READ Is it possible to wash the hood in the dishwasher?

Prevention

Preventing a breakdown is sometimes easier than fixing it:

Special products designed to effectively soften hard water will help prevent device errors.

When the filters become clogged, water does not circulate well during washing, overflow occurs in the washing tank, and an error light comes on.

If washing the filter does not produce the desired results, check the drain hose and drain for blockages.

If the Aquastop sensor malfunctions, it is best to replace it.

Due to wear on the seal, water flows through the dishwasher door onto the floor during washing, from there it flows into the pan and the error light comes on.

In a Bosch dishwasher, error e27 or e15 requires calling a technician who knows how to fix the situation.

Most problems that arise during the operation of dishwashers can be resolved by owners on their own.

How to fix error E15 in a Bosch dishwasher

The uninterrupted operation of dishwashers (hereinafter also referred to as PMM, dishwashers) of German companies is perceived by their owners as proper. But if one day error in a Bosch dishwasher, how can you fix it? This event confuses many users of this technology.

If error code E15 lights up on the screen, do not rush to call a technician. Take the instructions for the dishwasher and read it carefully. Well-known German manufacturers - Bosch, Siemens, Neff - provide an explanation of the alphanumeric compositions that appear during malfunctions. And if you can’t find the abstract, check out our article.

Error E15 on a Siemens dishwasher and its solution

We invite you to watch a video about why error E15 occurs in a dishwasher and how to correct it:

Electronics engineer with many years of experience. For a couple of years I was involved in organizing the repair of household appliances, including washing machines. Loves sport fishing, aqua tourism and travel.

Found an error? Select it and click the buttons:

There is a washing machine “for bachelors”. Linen washed in such a unit does not need to be ironed at all! The thing is that the device does not have a drum: some things can be placed inside the container directly on hangers (for example, jackets and shirts), and much smaller things (for example, underwear and socks) can be placed on special shelves.

In the 19th century, washing ladies' toilets took a lot of time. The dress was previously ripped open, and then each part was washed and dried separately so that the fabric did not become deformed. After washing, the clothes were sewn together again.

Astronauts, while in Earth orbit, solve the problem of dirty things in an unusual way. Clothes are dropped from a spaceship and burn up in the upper atmosphere.

The first officially patented washing machine was made of wood and was a box with a frame half filled with wood balls. Laundry for washing and detergent were loaded inside and the frame was moved using a lever, which, in turn, made the balls move and grind the laundry.

Washing machines equipped with the “No Ironing” or “Easy Ironing” functions can wash clothes without actually wrinkling them. This effect is achieved due to a special approach to spinning - it is performed at low speeds, with long pauses, while a small amount of water is retained in the tank.

Siemens dishwasher. Error e 15. The faucet is on and buzzing.

For washing small items on the road or in a hotel, it is convenient to use a regular plastic bag. Socks or tights are kneaded inside a tied bag along with water and a small amount of detergent. This method allows you to pre-soak things and wash them without damaging the fabric or wasting a lot of powder and water.

There are a variety of balls that are used in the washing machine. Antistatic ones will prevent the fabric from sticking to the body after washing, balls with special loops will “comb” the lint and prevent the appearance of pills, and silicone ones with pimples will prevent fluff from matting when washing outerwear.

The expression “soap opera” (“soap”) did not arise by chance. The very first series and shows that had a female audience were broadcast on television at a time when housewives did cleaning, ironing and laundry. In addition, to attract female viewers to the screens, commercials for detergents: soaps and powders were often played on air.

History knows the fact that a kitten fell into the drum of a washing machine and, after going through a full wash cycle on the “Wool” program, got out of the unit unharmed. The only trouble for the pet was an allergy to washing powder.

Diagnosis of the error

First of all, read the technical instructions, which indicate all the possible error codes and the reasons for their occurrence.

Well-known German manufacturers - Bosch, Siemens, Neff - provide an explanation of the alphanumeric combinations that appear during malfunctions.

Carefully inspect the machine to see if there is any water leaking out. If the cause is minor faults, for example, clogged rubbish, you can fix the breakdown yourself.

Why does PMM give an error?

The E 15 icons on the display indicate that the Aquastop protection has been activated (the explanation is also indicated in the instructions). In this case, the equipment turns off and can emit a sound signal. The protection system is triggered when water overflows or leaks. You may hear the sump pump start to remove water, but the control panel will not respond.

What to do in this case? We need to find the cause of the problem. To do this you need to check:

connections of pipes and hoses, as well as their integrity;
correct connection to the water supply system;
filters and drain system for blockages;
“Aquastop” sensor for serviceability;
water level sensor.

Why else the dishwasher show a fault code? The cause could be an incorrectly selected detergent. Excess foam leads to leaks and errors.

The most common damage

Float stuck

One of the possible reasons for the appearance of error code E15 on the display is the sticking of the float located in the pan. If this is indeed the case, fixing the problem is not difficult. Disconnect the PMM from the power supply by removing the power plug from the socket. Rocking, moving from place to place (preferably so that the body vibrates) or tilting the body at an angle of 30-40° to one side will help correct the situation. True, such manipulations are not easy to do if the equipment is built into the furniture.

Be careful as a strong tilt will cause water to leak from the pan onto the floor. This method often helps restore normal system operation. Finally, you need to tilt the machine enough to completely drain the water from the pan.

Do not rush to turn on the unit immediately. It is necessary to dry the pallet, which takes about a day. You can carefully use a hairdryer, then the PMM will dry very quickly. If, when turned on again, the alphanumeric combination E15 disappears, then the problem has been resolved. Otherwise you will have to deal with more serious damage.

Excess detergent

Excess detergent can lead to excessive foaming and error code E15, so detergent must be dosed strictly.

How to fix the problem

Rule out a system failure by rebooting the machine and clearing the error. To do this, disconnect the equipment from the network for 10-15 minutes, then connect it again. If the code is still displayed on the screen, then proceed to check.

You can find out if there was actually a leak like this:

Close the inlet valve.
Disconnect the water supply and drain.
Remove the PMM from the cabinet (if it is a built-in model).
Lay down a cloth and tilt the dishwasher forward. If water pours out of the pan, then there is a leak. If not, then there are problems with the contacts or the control module. In this case, it is better to contact a specialist.

If the problem is a leak, you need to locate the leak as soon as possible. To do this, remove the top and back panels, connect the dishwasher to water and electricity and do a test run.

Now all that remains is to observe where the water starts to drip from. Found a faulty part? Turn off the equipment again and start repairing.

How to fix the situation if a metal bin is leaking? You can try to seal the crack with cold welding. Just prepare the surface first: clean and degrease. In severe cases, you will have to buy new equipment.

If the reason is loose hose fastenings, then tighten the clamps more tightly. If the circulation unit leaks, you need to completely replace the part - how to do it. described in a separate article.

Timely cleaning of the filter is the prevention of leakage. When the filter becomes heavily clogged, excess pressure develops in the pipes, causing them to rupture. Cleaning should be carried out at least twice a month. How to do it:

open the hopper door;
pull out the lower basket;
unscrew the filter in the pan;
rinse under high pressure water.

You figured out what the E15 error code means and also learned how to fix it. If you take proper care of your dishwasher. then blockages and leaks will not be a problem.

Dishwasher filter

Timely cleaning of the filter prevents leakage. When the filter becomes heavily clogged, excess pressure is created in the pipes and they break. Cleaning should be done at least twice a month.

open the hopper door;
pull out the lower basket;
unscrew the filter in the pan;
rinse with water under pressure.

READ Standards for installing a gas meter in an apartment

Control float (safety system)

The dishwasher float switch may become stuck or seized. This results in water remaining inside the appliance between wash cycles. Depending on your dishwasher model, the float may be small, mounted in a corner, or it may have an X-shaped device located directly on the bottom of the dishwasher. A damaged float will require replacement or repair.

Testing system

Sometimes the machine control program fails, and in some cases, machine parts fail: in this case, you will need to call specialists. Typically, Bosch and Siemens devices have testing systems installed:

First of all, run the testing system on the device. The manual for the dishwasher contains the code (for example, error E15 in a Bosch dishwasher.
When the dishwasher starts the testing process, you will see that the device displays an error code on the display (it blinks), then it will become clear what is broken in the device.
Find the failure code in the manual for the machine and read what is written about it in the instructions.

Bosch, Siemens, Neff machines and a number of other dishwashing machines have individual fault codes that blink on the display: we said this above. As a rule, these are letters or numbers.

How are Neff fault codes deciphered?

The NEFF dishwasher malfunction warning system does not have a standard set of codes. Each model may have its own. Therefore, we included in the list all possible combinations of letters and numbers that may appear on the display of any PMM model of the Neff brand.

Let's consider the meaning of the codes available to the user without test (service) mode:

E01, E05 - in both cases the problem is in the control module. You will need the help of a technician to further diagnose the device.
E1 - lack of heating due to a problem with the sensors or electronics. It is also possible that there is a short circuit or an open circuit in the heating element circuit.
E02, E04 - the water does not heat up due to an electronics failure. If error E02 occurs, the heater relay on the control board is most likely broken.
E2 - the temperature sensor (NTC) is broken. In most cases, the part must be replaced.
E03 - additional drying is faulty. Reasons: the heating element relay has broken (responsible for its operation), a contact in the circuit has come loose, or the wire itself has broken.
E3 - problem with water intake: the PMM tank takes longer to fill than the set time. This happens when there is insufficient pressure in the water supply or the supply tap is turned off. The pipes, inlet valve may be clogged, or the chamber door may not be closed tightly. More serious problems, such as a breakdown of the intake solenoid valve, pressure switch or controller, should be repaired by a specialist.
E4 - failure of the flow sensor (switch), which is responsible for the distribution of water in the sprinklers. It may not work properly either due to blockage or if the circuit is broken.
E5 - excess water level in the chamber. This happens when the drain system is clogged or damaged. The pressure switch or inlet valve may also be faulty.
E06 - failure of the camera door position sensor. The start of the wash is blocked because there is no signal that the door is closed. The cause may be a broken door lock, which is easy to fix yourself. If the sensor is broken, it will have to be replaced.
E6, E28 - malfunction of the aquasensor, which checks the quality of the water when rinsing. The control module or the sensor itself may be faulty. The latter needs to be replaced.
E07 - drain does not work. The reason is improper loading of dishes, which may block the hole for the outflow of liquid.
E08, E8 - low water level in the chamber. The heating element will not turn on because the circulation pump does not have enough water. The reason must be sought in the incorrect installation of the latter or a violation of the installation of the drain hose.
E09, E9 - malfunction of the heating element. Perhaps the wire has broken or the contact in the heating element circuit has come loose. If it burns out, the part will have to be replaced.
E10 - drying does not start due to a malfunction of the heating element or fan.
E11 - the temperature sensor is broken. In this case, it either does not work at all or shows incorrect data. It is necessary to check the circuit and inspect the contacts. If the thermistor is broken, it is replaced.
E12 - poor drying or insufficient heating. Most likely, the heating element is overgrown with a layer of scale and this prevents it from functioning correctly.
E13 - indicates the flow of too hot water (over 75 °C) due to a breakdown of the temperature sensor.
E14 - water flow sensor error. The reasons are standard: the circuit has broken, the contacts have come loose, or the part itself has broken.
E15 - the Aquastop leak protection system has activated. It is necessary to find the location of the leak: check the hoses, housing and other components of the PMM for damage. If the drain pump itself is leaking, a new part is installed.

The error may appear after the control module has been replaced. Try rebooting your device. (How to restart the PMM, read after the list of errors.)

E16 - leaking valves or sensors. It is necessary to inspect the PMM components for leaks. Damaged parts are best replaced.
E17 - flood error (associated with strong pressure or overflow). It is necessary to check the pressure in the water supply and reduce it. The pressure switch or fill valve may be broken.
E18 - low water level in the tank. Most likely, the inlet valve has broken, but the error may also indicate the problems described in codes E3 and E14.
E19 - means internal error. You need to contact the service center.
E20, E21 - the circulation pump is not functioning or is blocked. The malfunction is associated either with an open circuit in the pump motor, or with a breakdown of the tachogenerator or capacitor. Then they will need to be replaced.
E22, E24, E25 - problems with drainage. The filter (or drain hose) may be defective or clogged. It is necessary to exclude incorrect connection of the latter, as well as failure of the drain pump.
E23 - the drain pump is broken. You can check the pump blades for foreign objects that may be blocking the pump's operation. If the part itself is broken, then either repair or replacement will be required.
E26 - water flow sensor error. It is necessary to check the circuit for breaks, contacts, and the part itself.
E27, E29, E30 - indicate a failure in the power supply. E27 indicates low voltage, E30 indicates high voltage, E29 indicates its absence. What to do? First, call an electrician to check the wiring and further repairs. If the problem cannot be resolved, then you need to contact the service center.

If any other alphanumeric combination appears on the screen (which is not in the list), then a technical malfunction has occurred. You can try to correct the situation by rebooting the device.

To restart the PMM, you should:

disconnect equipment from the power supply;
wait a while (at least 10 minutes);
try to start the device again.

If reinstalling the PMM was unsuccessful, you need to contact a service center for repairing household appliances.

We figured out what this or that code means. But sometimes a signal that the dishwasher is not operating properly is accompanied by lights on or flashing on the control panel. Let's look at their meaning below.

The display flashes. This indicates that the cell door is not closed tightly.
The “Tap” indicator came on. It notifies you that water is not flowing into the chamber. Possible reasons are described in code E18.
The wash indicator lights up. It signals that the car needs to be washed.
Synchronized flashing of all indicators on the panel indicates a failure in the software or control board. In such cases, the manufacturer in the instructions for the device recommends restarting the equipment. If rebooting does not help, then calling a technician will be the best solution.

Read below to see what other problems arise when the dishwasher is running.

For what reasons does a Bosch dishwasher give an error?

How does the problem manifest itself? The machine stops working, the display shows code E 15 or the “faucet” icon lights up. This means that the water leakage protection or “Aquastop” has been activated. To understand the cause of the problem, let's look at the features of the protection.

In some cases, the pump does not turn off and runs continuously, even if the dishwasher is turned off. Therefore, it is better to “cut off” the equipment from the network, otherwise the pump or switch may burn out.

What could cause the water leak:

Incorrect operation of the leakage sensor.
There is a blockage in the drainage tract (filter, pump, hose, pipe).
Poor sealing of the pipe.
Problems with the water spray (rocker arm).

Important! The formation of a large amount of foam can also cause the float switch to trip. Use detergent in doses, strictly according to the instructions.

Self-correction of the error (when the tap is lit on the screen)

It is possible that the leakage system has worked incorrectly and needs to be reset. To do this, press the main start button and hold it in this position for 20 seconds. The system will reboot and start working. You can unplug the machine for half an hour to reset all settings and reboot the control unit.

Resetting the settings is the first thing you need to do. It is quite possible that after rebooting the PMM, its functionality will be restored.

On a Bosch machine

If you are not confident in your abilities and technical knowledge, do not try to fix the breakdown yourself. The AquaStop system and the associated E15 error can lead to more serious consequences. For example, to burnout of sensors or a working plateau.

When the leakage protection system is triggered, the drain pump is always turned on. It pumps out any remaining water in the dishwasher to prevent further flooding.

Such a leak requires a qualified inspection of the equipment, professional analysis of all parts and knowledge of the nuances of your model.

If, after restarting, error E15 appears again, check the reset algorithm in the instructions supplied with the PMM.

How to fix the situation

All Bosch dishwashers, including Bosch Silence Plus models, are equipped with Aquastop protection. First of all, you need to eliminate a failure in the system. This happens if the control module gives an incorrect command and error E15 is displayed on the display.

A factory reset needs to be performed. To do this, proceed sequentially:

unplug the machine;
wait 10-15 minutes;
connect again.

If to reset the code and it appears on the display again, then we will move on to other measures.

It is necessary to prevent the float sensor from sticking and remove water from the pan. To do this, shake the equipment a little so that the float returns to its previous position. Then unplug the machine and tilt it at a 45 degree angle. Drain excess water into a nearby container. You can dry the PMM by leaving the door open overnight.

What to do if your manipulations did not work? You'll have to start disassembling the dishwasher. By following our instructions, you can handle simple repairs yourself.

Removing the blockage

As we wrote above, the car may show code E15 due to a clogged tract. It’s easy to fix the problem yourself. Most often, the drain filter becomes clogged due to the ingress of pieces of food, glass fragments, and debris.

Important! Before starting work, disconnect the PMM from the network and turn off the water supply. Wear gloves when cleaning the filter. There may be fragments of broken dishes.

Open the door.
Remove all baskets from the hopper.
The filter is located at the bottom of the Bosch dishwasher.
Take it out, remove dirt and rinse with running water.

To check the drain hose and pump, you will have to turn the PMM on its “back”, allowing access to the bottom:

Remove the screws around the perimeter that hold the bottom cover in place.
Do not remove it completely, because the float sensor is attached to the other side.
With the lid slightly open, unscrew the screw holding the sensor (you can replace it if it breaks).
Set the lid aside.
You have gained access to the “insides” of the technology.
Disconnect the hose from the pump using pliers.
Check it for blockages and damage. Clean under running water or install a new part.
To remove the pump and check for blockages, disconnect the connectors leading to it.
Remove the screw on the side.
Turn the pump and remove it.
Inspect the impeller, check the gasket for damage and wear.

If the pump breaks, it cannot be repaired. It is immediately replaced with the original part.

Installation is carried out in reverse order.

Changing the sprinkler

Over time, some components of the Bosch dishwasher may become unusable. Replacing the sprinklers is easy - one of them is located under the ceiling of the bunker, the other below.

remove the dish basket;
unscrew the lower spray arm;
to replace the fastener, grab it and unscrew it from the bottom;
screw in the new fasteners and install the new sprinkler.
press the stops and remove the upper basket;
a rocker arm is attached to its lower part;
pull the part and remove it from its seat;

A common problem with sprinklers is a worn seal, resulting in a leak.

We have described the main reasons for the breakdown of the Bosch PMM, in which error E 15 appears. But that’s not all. The appearance of a fault code can be influenced by:

Worn pipes and seals that leak over time.
Damaged door seals, hoses, gaskets, clamps.
Breakdowns in the housing, bunker.

If the dishwasher stops working but does not display an error code, then test it. This will help determine the cause of the breakdown.

Take the instructions for the equipment.
Read what key combination launches the autotest.
After activation, the self-diagnosis system will detect a problem and display a code on the display.
Find the decryption and start troubleshooting.

Having gained access to the internal parts of the machine, check all connections, clamps, and pipes. Most often, the problem can be fixed with your own hands, without resorting to the help of service centers. We recommend following the instructions when using the equipment and not exceeding the recommended amount of detergents. Then the PMM will work long and stably.

READ Error e 10 in the washing machine

How to find the cause of the error?

It is clear that on a Siemens dishwasher, an error with this code, in most cases, appears due to a leak. But still, you should finally make sure of this, because it happens that the sensor or, even worse, the control module fails, and all the electrics, along with the electronics, begin to fail. Let's do the following.

Let's unplug the dishwasher.
Let's turn off the water.
Let's disconnect the sewer and water supply lines.
Let's take the dishwasher out of the niche in which it was installed.
Place a cloth on the floor and tilt the dishwasher. If water flows from the pan onto the rag, then it really is a leak; if the pan is dry, you need to look for a problem in the electrics or even electronics.

If a leak occurs, there is a high chance of repairing the machine yourself, but if the electrics and electronics are faulty, it is better to contact a specialist. So, we figured out that the Siemens dishwasher really was leaking. So you need to find the place where this leak formed. It sounds simpler, but in reality this is the most difficult stage of repair, which in some cases takes a very long time, especially if the repair is done by a non-professional.

To quickly find the location of the leak, the dishwasher should be partially disassembled. We remove the lid and the back wall so that the gap between the washing hopper and the tray can be seen as best as possible. Next, we connect the machine to water, sewerage and an outlet, and then run a test wash.

Be careful! It is unsafe to start a partially disassembled dishwasher. Try not to touch conductive elements.

While the dishwasher is running, your task, while lying down, is to monitor the clearance between the tray and the washing hopper. As soon as water starts dripping into the pan, your task is to localize the location of the leak and remember it well. After this, you will need to turn off the machine again and, after removing the pan, accurately determine the location of the leak and the part that has become weak.

Clogged drain system

Error E15 in a Bosch dishwasher may appear if:

the filter is clogged with grease and food waste;
the drain hose or pipe is clogged or depressurized;
there is a blockage in the sewer.

Failure to clean the filter element in a timely manner is one of the common reasons that leads to the appearance of fault code E15. Restore the filter to functionality as follows:

unplug the dishwasher;
remove the lower basket for dishes from the chamber;
unscrew the cap located next to the lower spray impeller;
remove the filter element from the niche;
wash the filter using any household detergent to remove grease deposits;
Reinstall the cleaned filter.

So, the filter is cleaned. If, after removing the water from the pan and restarting, the E15 fault code still appears, you need to check whether the drain pipe is leaking.

To do this, you will have to disassemble the Bosch PMM in this order:

Disconnect the unit from the power supply by removing the power plug from the socket.
Remove the filter that was previously cleaned from the niche.
Remove the left and right housing covers by unscrewing them with a screwdriver.
Turn the PMM over so that the bottom is at the top.
Remove the front panel by unscrewing the bolts on the left and right sides of the case. To do this, you may need a screwdriver with a torx bit.
The metal strip that will open after removing the panel must also be removed. To do this, unscrew the screws that secure it to the body.
Unscrew and remove the bolts located in the back wall of the dishwasher.
Disconnect the rubber clamps holding the pump to the bottom of the PMM.
Remove the two plugs on the sides of the case; they should be made of plastic.
Disconnect the door holder from the body.
Remove the lower part of the housing, first removing the rope from the spring.
Disconnect the drain hose from the pump and check its integrity. Clean under strong water jet. Replace if necessary. The same must be done with the pipe, removing the mounting clamps.
Reassemble in reverse order.

If you have doubts about your ability to independently cope with the disassembly and assembly of the PMM, call a specialist. He will quickly find the cause and eliminate the damage.

What does it mean?

If error E15 is displayed during the washing program, this can only mean one thing - the dishwasher has taken in too much water, and the sensor that monitors this has tripped. The fact is that a modern Siemens is equipped with a leakage protection system, which urgently turns off the machine if such a leak occurs. In this case, the dishwasher not only turns off, it also notifies the user about a malfunction and it does this using a code system, in this case issuing code E15.

Siemens dishwashers , any error code, including E15, is accompanied by an unpleasant, but loud and clear sound signal.

Service area

Service is constantly expanding the geography of its activities. The company offers on-site repair services for washing machines, dryers, dishwashers, refrigerators, ovens and electric stoves in Moscow, the Moscow region, New Moscow, Odintsovo, Elektrostal, Troitsk, Domodedovo, Dmitrov.

After our technicians, your household appliances will delight their owners with impeccable performance for a long time to come. Contact us and we will do our best to restore your unit as quickly as possible. The client is satisfied - “Stir-Repair” is calm.

Source

Error E15 for a Siemens dishwasher

How to fix a Siemens dishwasher if error E15 appears on its display? Everything will depend on the nature of the breakdown that caused this error, but we can assure you in advance that in 85% of cases this code can be successfully removed with your own hands without the involvement of a specialist. So you have a good chance of fixing the machine yourself, especially after reading this article. We, in turn, will try to provide you with all kinds of informational assistance and support.

How to fix it?

Some users do the following when a small leak occurs. They simply drain the water from the pan and start the dishwasher again. If the leak is not severe, then this measure helps for 1 wash cycle. Then, in order to start the washer again, you have to drain the water again and so on ad infinitum, until a sensible thought comes to mind - to try to repair the machine.

From our point of view, this option cannot be called acceptable. In such a situation, you need to look for a leak and fix it either by replacing the part (which is best), or using improvised means like cold welding or sealant. If a leak has formed at the junction of the pipe with a plastic part, you can try to tighten the clamp more tightly, having previously lubricated the junction with sealant.

If you find damage to the body of the washing hopper, it is better to repair it by cold welding. Moreover, the damaged area should first be dried with a hairdryer, degreased, and only then covered with an even and not too thick layer of cold welding. If the circulation pump housing bursts, the part should be completely replaced. It is impossible to repair a burst housing using improvised means.

In some cases, a garbage filter can cause a leak. If it becomes very clogged, this will lead to excess pressure in the system, which in turn will either rupture the pipe or do something similar. Therefore, timely replacement and cleaning of the dishwasher filter is a vital procedure that can partially protect your “home assistant” from malfunctions. Don't neglect her.

Siemens dishwasher and what to do if this error stopped the “home assistant” from working. We have identified a list of breakdowns that this code provokes, and figured out how to find and fix them. We wish you a successful renovation!

Recommendations from experts

Often error E15 in a Bosch dishwasher does not occur due to its breakdown. There are a number of secondary reasons that experts recommend paying attention to:

Flooding from the sewer and leaking communications can cause error E15. This is due to water getting into the pan. For example, a dishwasher is connected with a hose to the sink siphon. When it becomes clogged, water from the sink does not go down the drain, but is directed through the drain pipe into the machine.
Error E15 will appear if you add concentrate for manual dishwashing instead of the recommended products. Violent foaming occurs, which not only fills the entire pan, but also floods the electronics. In the latter case, it is impossible to correct error E15 yourself. The car is sent for repairs to replace the electronics.
Error E15 can also occur when using recommended products, but of poor quality. They similarly cause strong foaming.

When you manage to correct error E15 yourself, you still need to remove the remaining water from the pan of the car. If liquid is present, Aquastop will prevent the dishwasher from starting.

This is interesting: Bosch dishwasher error codes and their meaning

What do the indicators on a Bosch dishwasher mean?

What do the indicators on the Bosch panel mean? The brush (1) indicates the washing phase. End (2) — end of the sink. The tap (3) is on - water is supplied to the system.

Sources:

https://cosmo-frost.ru/posudomoechnye-mashiny/kody-oshibok/oshibka-e15-v-posudomoechnoj-mashine-siemens/ https://myosu.ru/dom/oshibka-e15-posudomoechnaya-mashina-siemens- posudomojka-simens-oshibka-e15-chto-delat.html https://cosmo-frost.ru/posudomoechnye-mashiny/kody-oshibok/oshibka-e15-posudomoechnoj-mashiny-bosh/ https://mashmaster.ru/oshibka -posudomoechnoj-mashiny-e15-u-posudomojki-simens/ https://sdt-taganrog.ru/posudomoyka-simens-oshibka-e15-kak-sbrosit/