Plumbing fixtures today are often equipped with technically advanced devices that simplify operation and increase comfort. These include a toilet lid with a built-in microlift. Is not it?
But due to natural wear and tear of parts and incorrect operation, the system tends to fail. Of course, you can entrust the repair of the toilet lid to plumbers, but in order to save time and money, you can do it yourself. Moreover, in practice it is quite simple to implement.
In this article we will understand the operating principle of a microlift, consider the main types of breakdowns and tell you what is needed to fix them. For clarity, the article contains photo and video materials that reflect the essence of the issue.
Content:
- General description.
- Device.
- Possible malfunctions and ways to eliminate them. Identifying the problem
- Trouble-shooting
- Bolts broke
- The support system has weakened
- The spring burst
- The bushing is broken
- The bolts and nuts are rusty
- Piston microlift lubrication
Removing the old seat
Difficulties may arise with metal seat mounts. Especially if they are made of steel. This alloy is susceptible to corrosion. To unscrew the nut, you may need citric acid or kerosene. If they do not help, then WD-40 lubricant, otherwise called liquid wrench, can deal with rust.
The second dismantling option involves the presence of a hacksaw or grinder with a corresponding disk. Using these tools, the top head of the screw is completely cut off. If the tank is attached to the toilet, then you need to lift it to a distance sufficient for sawing and saw through the sleeve itself.
Removing a seat with plastic ties is easier. Polymer materials are not subject to oxidation or deformation without mechanical stress.
The only difficulty may arise when turning the nut when the thread is broken. But then you can heat the knife blade and cut off the bolt in any area. After cooling, melted plastic can be easily removed from the smooth surface of earthenware, porcelain or ceramics.
general description
The device for smoothly lowering the seat is a practical addition to the classic lugged bushings. To understand how to repair a toilet lid microlift, you need to find out information about its structure and operation. Another difference is that the device is built into the toilet seat initially.
For the production of devices, hard plastic with a base of formaldehyde and phenol and reinforcing additives is often used. This is justified by the high demand for lightweight, inexpensive polymer seats. Less commonly, for heavy structures made of wood and metal, the microlift is made of stainless steel. Such closers must be periodically lubricated, which can sometimes be difficult.
The purpose of the device is to protect plumbing equipment from possible damage after impact from the lid or seat. In addition to this significant advantage of using a microlift, other positive aspects are noted:
- no noise when moving accessory elements;
- increasing the service life of the product due to careful handling;
- User safety is ensured by preventing the lid from spontaneously falling onto the back.
Plus, the sanitary bowl is always closed, and odors do not penetrate outside. The ease of installation and the permissibility of installing automated systems are also highlighted. But it is not recommended to install and repair compact chairs with a microlift yourself. The reason for this is the relative fragility of duroplast and ceramics. Suitability for troubleshooting may be limited by the design features of the closer.
Hinged connection
Attaching conventional structures is easy. You need to do all the steps in reverse order. Before this, you may need to assemble the purchased model. Typically, fasteners are based on plastic, metal, metal-plastic hinges.
Plastic ones are more often used in budget series. In addition to the price, they have another advantage - the absence of corrosion. Metal manufacturers use it in expensive structures. They last longer.
If the toilet lid needs to be replaced, the system can be disassembled. To do this, you do not have to remove the general mount; just remove the hinge shafts. The design depends on the manufacturer; it is better to study it according to the instructions. A locking pin at the end of the shaft is often used. You will need to tighten the pin, pulling the shaft out of the hole. There may be latches that have a lock. They must be rotated 90–180° counterclockwise. The shafts can be fixed with screws and screws.
Device
The smooth release mechanism is always considered as an integral element of the accessory as a whole. Therefore, before starting repair work, they find out the question of how to remove a toilet seat with a microlift, and not a separate part. Thus, a classic plumbing fixture consists of a seat, a lid, an elevator and a rim with a closer.
Regarding the design solution, closers can be of 2 types. The common elements remain the hinge and the bushing, which are responsible for the rotational movement. Models from inexpensive series have rods with springs. And more expensive mechanisms consist of a piston and cylinder. The package also includes response clamps that are attached to the toilet.
There are 2 door closers installed. Each is separately responsible for controlling the lid and seat. As a rule, the first one fails earlier, since it is activated more often.
Water flows until it overflows
Water constantly flows from the tank. Most likely, the bolt holding the shelf and toilet together has rusted or cracked.
You should once again make sure that the leak occurs to the overflow level. Carry out a thorough inspection of the fittings and, if necessary, replace several bolts or the entire set of fittings.
The solution involves a complete disassembly of the tank. So, you need:
- Shut off the water supply.
- Empty the tank reservoir.
- Shut off the water supply.
- Unscrew the bolts holding the toilet together with the shelf.
- Rusty bolts should be cut off.
- Tilt the tank back, remove the shelf and place it on a flat surface.
In addition to the valve and float, all parts must be disassembled using keys and pliers. Replace the bolts with new ones during reassembly. Rubber gaskets should also be replaced or revived using sealant.
Secure the tank with the shelf with plastic bolts. Roll the cuff towards the toilet and carefully place it on the shelf. If necessary, tighten the shelf with thick copper wire or a clamp, as it can also leak, losing elasticity over time.
Possible malfunctions and ways to eliminate them
The nature of all malfunctions is either natural or violent. This means that the mechanisms have a limited service life, or the user violates the rules for using the product. Most often, breakdowns occur due to the latter.
Identifying the problem
The simplest problem that any user can deal with is damage to the seat or cover. Then it will be enough to use adhesive or acetone in the case of Duroplast, fix the product in the desired position and wait the required time. In other cases, before disassembling the lid microlift, you need to make sure that the action is appropriate. This need not be done if the malfunction lies in the loosening of the nuts. Then you only need to tighten the fasteners and continue to operate the structure with the same intensity.
The third option regarding malfunctions involves failure of the elevator mechanism. This could be a broken bolt, joint, rod, spring, cylinder or piston. Less often, defects are associated with excess or lack of lubricant composition. The first can be seen, and the second can be heard, as a characteristic creaking or intermittent movement will appear.
More often than not, the spring breaks. The manufacturer selects the element in accordance with the weight of the cover and seat. It should shrink naturally without outside pressure.
How to distinguish a faulty spring from a broken bushing without disassembling the mechanism?
To do this, just use pliers to rotate the rod. If it turns with little resistance, then the spiral part is fine.
Causes of breakdowns
In most cases, soft-close toilet seats do not require repair. The cover is made of duroplast - a material of increased strength, resistant to mechanical damage and dynamic loads. The closer is a non-removable structure, so repairing the toilet lid microlift with your own hands is impossible in principle: there is no access to the internal mechanisms.
This is not considered a design flaw of the microlift. All internal elements are made of high-quality materials designed for long service life. Manufacturers fill the internal space with silicone to reduce friction and increase the working life of parts.
Preventive measures do not exclude physical wear of the mechanism, but the actual service life of the closer usually exceeds the period declared by the manufacturer. Therefore, the main cause of breakdown is careless operation of the product. For example, a person out of habit tries to forcefully close the lid. This should not be done: the spring is designed to gradually lower, and such rough interference with the planned work disables the mechanism.
The breakdown can be determined by the knocking sound that appears when the lid is lowered. This indicates that the degree of compression of the spring has changed and the microlift at least needs adjustment.
Closer
If the breakdown is internal, no way, because the microlift is a monolithic structure. A cracked rod or burst spring becomes critical damage that requires replacing the seat completely.
Service center specialists can restore the operation of the door closer system, but in some cases the cost of repairs may exceed the price of the device, so it will be easier to buy a new product.
Replacing fasteners
The mounting bolts are usually made of a soft material (brass alloy or plastic), so they can burst if moved carelessly. The problem is quite common
You can replace the bolts yourself. The work is performed in the following sequence:
- The water is turned off and the drain tank is removed - this action is not necessary, but this will simplify access to the fastening system.
- The lid is removed - the nuts located at the bottom of the toilet are unscrewed, and the bolts are pulled out of the grooves.
- The installation is carried out - damaged bolts are replaced with new ones, the system is assembled in the reverse order.
It is necessary to take into account the fragility of ceramics, so fasteners are installed only through plastic or rubberized washers, tightening is carried out without excessive force.
Lifting supports
The structure is fixed with metal supports. To do this, you need to remove the protective caps installed on each rack. On most models, special holes for a hex key are provided for such operations. After this, the seat and the lid rise up.
The fasteners inside the system rotate freely, so they are twisted forward or backward, aligning the lid with the toilet tank. When the adjustment is completed, the caps are returned to their places and carefully tightened.
Other faults
Considering the features of the microlift, not all faults can be repaired. For example, when the lid is forced down, the spring often breaks or is pulled out. The non-demountable design will not allow you to replace this element. The situation with the stock looks similar. If you are lucky, you can choose a mechanism with a working piston and then the closer will last for some time. However, you shouldn’t count on such luck, so if the piston is damaged, you have to replace the cover completely.
A separate situation is when the lid itself breaks. The causes of such damage are usually a strong impact or a point load on the surface, for example, when a person stands on the cover with his feet. The advisability of carrying out independent repairs is determined by the nature of the damage.
If the lid has split into several fragments, there is no point in trying to restore it. It will not be possible to assemble the product well, and a hastily glued surface will disrupt the overall design of the bathroom. In situations where a crack appears on the lid, the visual defect can be corrected with liquid nails. The adhesive composition is applied to the surface, the edges are joined together and fixed for several minutes.
Trouble-shooting
In what cases is repair impossible a priori? Plastic elements that are subjected to one or another load cannot be restored. Non-removable devices are only acceptable for complete replacement. Some components are difficult to find on sale in accordance with specific technical characteristics and physical parameters. A non-standard approach (and not always possible) may be to reconstruct the part using a 3D printer. The material is ABS plastic and is easy to sand.
Bolts broke
If the bolts are broken, you can handle the replacement yourself. To do this, you need to use the instructions for installing a toilet seat with a microlift. First, dismantling is carried out in the reverse order, replacing the old parts with the same new ones. Then installation is carried out in accordance with the algorithm of actions specified in the passport.
The support system has weakened
When the problem is a loose fastener, its position is adjusted and tightened. How to remove the microlift from the toilet in this case?
The method is selected based on the design solution:
- press the latches and lift the product;
- press the buttons located on the inside of the hinges;
- remove the protective caps from the legs where the hexagon socket is provided, turn the fasteners a little and remove the toilet seat.
Another option could be a single accessory and support system. Then you just need to unscrew the nuts. The gaskets may need to be replaced.
The supporting elements in the holes on the sanitary bowl move freely. Therefore, their position must be corrected by moving the parts. Then they are tightened with a tool (wrench or adjustable wrench, pliers) or by hand.
The spring burst
If the spring fails, then it can only be replaced. Then the microlift will have to be completely disassembled and reassembled. The process can be complicated by two points:
- the mechanism cannot be reconstructed due to the integrity of the structure;
- it is necessary to find a part in strict accordance with the faulty one in terms of size and stability relative to the load.
Work with a closer may also be limited by the monolithic nature of its execution. If disassembly is allowed, then repairs, as a rule, can only be carried out in a service center. This can be explained by the fact that they have special machines with tools and experience. In this situation, it is easier to replace the parts yourself
.
The bushing is broken
It is no longer possible to repair a mechanism with a faulty bushing. But there is a solution to restoring the toilet seat's usability. True, this does not apply to a smooth descent, since the equipment will work by analogy with the classic one.
The materials you will need are the following:
:
- a pair of bolts up to 40 mm long and counter extended nuts of M8 grade;
- two screws with a diameter of M6;
- a piece of polypropylene pipe measuring 20 mm.
The tube will serve as a replacement for the microlift bushing. You must first install a nut in it. This can be done like this:
- heat the edge of the workpiece with a hair dryer;
- insert the nut so that it does not protrude beyond the edges of the part;
- place the pipe under cold water so that when compressed, it securely fixes the metal part inside the cavity.
The location of the screws is revealed by applying the seat to the plumbing fixtures. In the intended location, holes with a diameter of M6 are drilled on the hinges. And on the cover, using the same algorithm, they create an installation opening for M8 bolts. After assembling the entire structure, you can start using the system.
The bolts and nuts are rusty
How to unscrew metal bolts and nuts that are covered with rust? There are only 2 solutions to this problem
. For the first option, you will need an active agent whose action helps destroy rust. The most famous product is called liquid wrench (WD-40). It is applied to the parts, left for some time and tried to unscrew the nut again.
If nothing has changed for the better, then you will have to take a hacksaw. It is more convenient to saw off the bolt when the toilet is offset relative to the drain. To do this, it is disconnected from the sewer, the remaining water is drained and moved to a freer place. In the case of plastic analogues, you can use a knife. In this case, the cutting blade is preheated.
With a radical approach, earthenware should be protected from contact with metal blades. You can use cardboard or rags for this. Then scratches do not form on the glossy coating, leading to contamination, destruction or biological damage.
Piston microlift lubrication
Regarding the lubricating gel composition, it should be enough for proper operation. If there is a lot of working mass, the risk of clogging increases; if there is little, work becomes difficult, creaking appears, parts wear out, and as a result the mechanism becomes faulty. The third option involves hardening and delamination of the mass, which must be completely replaced.
For microlifts, it is permissible to use silicone-based damper lubricant. The viscosity should be above 100,000 units. The mass is filled into the built-in capsule. Other technical oils cannot be used.
To replace the gel composition, you will need to gain access to the internal space of the closer. How to remove a microlift without the help of specialists? The process looks like this: each block with a closer is removed one by one, the piston is squeezed out of the cylinders by unscrewing the screw with a hex key. Inside the case there is access to the capsule. Assembly is carried out in reverse order.
Replacing the seat cover
Having decided to replace a broken structure, you must first take correct measurements of the plumbing.
To remove the microlift cover, you will need to prepare the following tools:
- pliers;
- rags/cardboard;
- hacksaw/knife;
- socket wrench;
- silicone (oil, grease), treat dried elements.
Dismantling begins by lowering the cover and then unscrewing the pins. To avoid damage to the plumbing, it is recommended to cover it on top with cardboard or rags.
The next step is to unscrew the clamp and bolts using pliers. If, due to the long service life, the fastening points are covered with plaque, the bolts have grown together with the body or are clogged, you can use a hacksaw instead of pliers or use a knife after heating the blade on fire. The remaining hot plastic on the surface of the toilet bowl can be easily cleaned off after hardening.
The new cover must be installed in the same sequence as during initial installation:
- insert rubber inserts (2 pcs) into the cover, ensuring a soft fit of the device to the seat;
- insert into the mounting holes;
- screw the fasteners, and additionally use rubberized seals;
- secure the cover with metal or plastic bolts;
- adjust the device;
- check how firmly the structure is secured.
Installing an accessory with a microlift
Installing a working toilet seat yourself is acceptable. Knowing the instructions, it will be easier to figure out how to remove the toilet lid with a microlift for the purpose of washing plumbing equipment, repairing structural elements or replacing them. The algorithm of actions is as follows:
- Determining the suitability of an accessory for a faience appliance. If there are discrepancies in size, then using such a system will be uncomfortable. You will need to return and purchase a new product with physical parameters adjusted.
- Ensuring a tight seal between the seat and the lid. On the inside of the latter there are small recesses for this purpose. They contain soft rubber seals. In addition, these 2 inserts perform a compensatory task regarding vibrations.
- Fastening the seat. For this purpose, there are 2 small holes in the plumbing equipment. Fasteners with clamps in the form of bolts or rubberized elements with clamps are inserted into them.
- Seat height adjustment. This is done using a special bowl. Such an event is aimed at eliminating distortion and loose abutment of structural parts. Then the risk of breakdowns will be reduced.
- Final fixation of products. When the balancing has been carried out and all the spacers have been placed, proceed to the final tightening of the nuts on the underside of the support base on the toilet. In the case of polymers, it is important not to use excessive force. This can cause the threads to strip or the bolt to burst. Then you will have to replace the fastener with a new one. If we are talking about metal, then overdoing it is rare, but it provokes a split in the ceramic unit.
There are removable models. For this purpose, special hinges with a functional rod are provided. It has grooves for fixing the toilet seat, and on the microlift of the product there is a button that loosens the grip on the fastening.
Innovations in plumbing: we disassemble and repair a microlift
A modern modification of a regular toilet lid, called a microlift, has its own characteristics, which are easy to appreciate as soon as you start using them. The main purpose of such a design is to smoothly raise and lower the lid, completely eliminating the possibility of sharp impacts on the sanitary ware from which the toilet bowl is made. This will prevent its preliminary damage, which can significantly reduce costs from the family budget.
Design Features and Benefits
The principle of operation of a toilet with a lid that has a built-in microlift is akin to a conventional door closer, which is already so familiar to most modern people. The microlift is usually already pre-installed in the lid, so it is unlikely to be purchased separately. The microlift is made from durable plastic or its analogue, a material called duroplast. It is entirely a polymer, although in appearance it can be confused with metal or even ceramics, and in properties it is closer to it.
This mechanism implies a rigid fixation to the toilet, but the designers did not forget about air shock absorption. The lid must have compartments with shock-absorbing silicone.
- Polymer toilet seat and lid.
- A special rod that secures the lid to the toilet bowl.
- A metal or duraplast spring that regulates and balances the weight of the entire structure.
- Microlift, that is, a hinge mechanism, which ensures a smooth change of lid positions.
You need to know that in more expensive designs, instead of rods and springs, specially designed pistons and cylinders in which they run can be used. Such models are generally considered non-separable; they operate on the basis of pneumatics or hydraulics, and can only be replaced, not repaired.
Simply remove the lid of a toilet with a microlift
Contrary to expectations, almost all toilet lids are equipped with ordinary, standard fasteners, which makes them easy to remove from their place and replace. The design can be incredibly complex and even equipped with electronics, but the fastening elements remain traditional.
- Lift the toilet lid as if you are going to use it. That is, the lid must be raised, while the toilet seat remains in place.
- On the left and right below the rim of the bowl there are special fasteners, which can be plastic, metal or also duroplate. Unscrew the fastening nuts first from one side and then from the other.
- Gently pull the toilet seat towards you so that the pins come out of the holes and remove the lid.
As you can see, removing a toilet lid with a microlift is not at all difficult, at least no more difficult than a regular one, so even a complete novice in plumbing can handle it. In a similar way, but in reverse order, you can easily install a new toilet lid, both with and without a closer.
Types of accessories with microlift
All products are classified based on their intended purpose. These can be universal products, children's or for users with disabilities. Here's what the features of each option look like:
- Classic seats with a cover are installed by most owners. They differ from simple ones only in the fact that they are equipped with a microlift. This type of product is suitable for almost all modern toilets.
- There are several extras for children. It can be not only color, pattern and compactness. Such accessories have an anatomical shape and are equipped with a backrest, safety ledges, handles, steps or stands. Another design is represented by a combined version of a universal and reduced design with two seats and a common lid.
- Highly specialized models are equipped with handrails that can be adjusted in width, height and tilt. This approach makes it easier for older people and people with disabilities to use plumbing equipment.
There are also seats designed for travel use. This way tourists can safely visit any toilet room. Comparatively less popular designs are designed for pets.
Installation work
Removing the old cover
So, a new seat has been purchased, before installing it, you need to remove the old one. This operation does not require a large amount of time.
The only thing that might come in handy are some tools:
- Socket wrench;
- Pliers;
- Hacksaw.
Instructions for removing the cover are as follows:
- Regardless of the type of construction, the seat is fixed with two nuts . Before using the tools, you may try to unscrew them by hand.
- If the nuts do not “give”, use a socket wrench.
- In some cases, the bolts will be able to turn . To prevent this, pinch them with pliers.
- If it is not known why the fasteners could not be unscrewed, the bolts must be cut off with a hacksaw . But, before taking drastic measures, you can lubricate the thread with silicone or oil and try to unscrew it again.
Rules for choosing equipment with a microlift
The choice of a toilet seat with a microlift is based on the parameters of the toilet, the structural features of the devices and the materials from which the component elements are made. The Aquasan store offers products from reliable manufacturers for sale, including a tank with similar functionality to the lid. You can place an order for goods at any convenient time of the day.
Here's what to consider before making a purchasing decision:
- compliance of the accessory with the dimensions of the seating part of the sanitary bowl and the location of the holes for support fasteners;
- use of high quality materials and warranty period of service;
- comfortable use and a design solution that is relevant for the interior.
Another selection criterion is based on hygiene standards. As a rule, they limit the service life of the toilet seat to 6-9 months. You can use stone, earthenware and duroplast longer. But wood is inferior in strength and resistance to moisture. Cracks cannot be restored and are a risk zone for biological damage.
Here is a short overview of the characteristics of popular materials
:
- Plastic is cheap, lightweight, but remains cold, turns yellow, and has low strength.
- Duroplast is comparatively harder and retains its shape and color for 15 years. But it is more expensive and hardly heats up in a warm room.
- Metal is rarely used for installation on earthenware units, but it is durable and practically not damaged during operation. The truth is heavy and must be protected from corrosion.
There are plywood models with soft lining. This chair is comfortable to use. The basis can be fiberboard or chipboard for cheap models, but natural solid wood lasts longer. Materials are subject to mandatory treatment with antiseptics and water-repellent agents.
Upholstery and filling are characterized by poor resistance to moisture, mechanical stress and a relatively short service life. The PVC coating peels off relatively quickly at the ends of the lid or seat and cracks. Due to the violation of the tightness of the finish, a favorable environment for the development of bacteria appears.
Plumbing equipment cannot be returned as it belongs to the group of hygiene products. Therefore, before paying, it is necessary to check the product visually and to ensure that the microlift is working correctly. The component elements should be free of unnecessary inclusions, nicks, irregularities, chips and thread failures.
The presence of sealing gaskets and liners must be monitored. They are needed so as not to damage the ceramic toilet. Such parts are installed in the places of fastening elements, on the underside of the seat and cover.
What is stained glass?
Stained glass is a separate type of monumental and decorative art, which is interesting in itself, and in combination with other interior elements it gains even greater expressiveness and harmony. What he really is? Stained glass refers to paintings, patterns, drawings and ornaments made of glass or on glass. As a rule, they are installed in large windows, doorways, niches that divide the space in the room, as well as on lanterns and even lamps.
Currently, its definition is expanded, and now stained glass is any decorative glass filling of door and window openings, lanterns, vaults, lampshades, domes and ceilings, as well as individual glass products that are intended to decorate a particular room.
Stained glass is made in the form of ornamental compositions. They can be made of colored or transparent glass with painting on individual parts or on the entire plane. In addition, stained glass windows can be made from individual colored parts of a wide variety of shapes. In this case, they are reinforced with special lead tape.
Preventive measures
To prevent malfunctions from occurring, you must follow the rules for using the mechanism. The first thing to remember is that you cannot put additional pressure on the lid or seat. It should work at a slow pace initially.
Every 2-3 months it is necessary to monitor the position of the toilet seat. If deviations occur, adjustments are made. To do this, you need to loosen the supporting fasteners, align them and fix the structure again.
Cleanliness must be maintained. Blockages provoke corrosion of parts, interference with movement, and as a result, failure of individual elements or equipment in general. In addition, pollution becomes a comfortable place for the development of bacteria and the appearance of an unpleasant odor.
Accessories
What does this device consist of? It has pistons, a rod, cylinders and a spring. All parts are interconnected with each other, and if one of them breaks, it is not always possible to replace it. This can only be done by qualified specialists, and only a few.
Most often, the seat fastenings break. This means that before purchasing you should pay attention to this part, namely, what material it is made of.
It is advisable to choose metal parts, because plastic in this matter is a short-lived material.
Universal mounts for toilet seats in the Leroy Merlin catalog
The toilet seat (toilet) is an important element that ensures comfort and ease of use of the toilet. As a rule, the seat comes complete with the toilet, but if necessary, the user can always separately buy a toilet seat and fastenings for its installation, which presents absolutely no difficulties. If it is necessary to replace broken fasteners, you can easily dismantle them and install new ones - thanks to the universal design of the fastenings, you can easily select the required set. The main difference between toilet seat mounts is the material used.
Features of types of toilet seat mounts depending on the material of manufacture
Fastening elements for a toilet seat are of the following types:
- plastic: the most budget option. Plastic is not afraid of moisture, that is, it is absolutely not susceptible to the formation of corrosion and oxides. That is why such a mount will always be easy to replace - it will easily unscrew;
- brass: as a rule, to protect against oxidation, a brass part is coated with a layer of chromium, so the product has a white color (metallic). Brass fasteners are characterized by increased strength and durability. The price of such a set of toilet seat mounts will be higher than that of plastic;
- stainless steel: characterized by good strength and durability, however, rust can still appear on such a surface due to accidental contact with abrasive substances during the cleaning process of the toilet, low quality “stainless steel” (insufficient chromium content), which will cause difficulties when dismantling becomes necessary. The solution to this problem is plastic inserts.
In the Leroy Merlin online catalog you can choose and buy universal toilet seat mounts in various configurations, made of plastic, brass, and stainless steel. We offer the best prices and reliable quality. Detailed photos and descriptions will give you a complete idea of the parts that are included in this or that kit.
Leroy Merlin offers a wide selection of goods at low prices for residents of Moscow, as well as the cities of the Moscow region: Balashikha, Podolsk, Khimki, Korolev, Mytishchi, Lyubertsy, Krasnogorsk, Elektrostal, Kolomna, Odintsovo, Domodedovo, Serpukhov, Shchelkovo, Orekhovo-Zuevo, Ramenskoye , Dolgoprudny, Zhukovsky, Pushkino, Reutov, Sergiev Posad, Voskresensk, Lobnya, Klin, Ivanteevka, Dubna, Yegoryevsk, Chekhov, Dmitrov, Vidnoye, Stupino, Pavlovsky Posad, Naro-Fominsk, Fryazino, Lytkarino, Dzerzhinsky and Solnechnogorsk. You can order the necessary goods online with delivery to all these cities or visit one of our retail stores in Moscow and Moscow Region.
Features of the mechanism
Despite the fact that the cost of plumbing products with a microclimate is slightly higher compared to conventional ones, they have a number of positive qualities, among which the following can be noted:
- Closing and lifting the lid is silent.
- Extends the life of the plumbing fixture, as it prevents the appearance of microcracks on its surface due to constant impacts. Accordingly, the service life of the plastic structure itself increases, since plastic is a rather fragile material, also prone to cracking.
- Easy to install, making it easy to install the seat yourself. Moreover, if necessary, the lid can be easily removed, for example, to wash.
- More expensive models can work automatically, that is, they raise the lid when a person appears, and also close it if no one is in the room.
The best manufacturers
Recommended manufacturers of seats equipped with microlifts:
- Ifo Orsa (Sweden). The soft closing device itself is made of high quality Duroplast. White color. The seat is hard. The design is suitable for Kolo Primo and Keramag Flow toilets;
- Gustavsberg Nordic. The mount is made of high quality metal. The seat is hard. It is clearly fixed on the bowl. The model type doesn't matter. Suitable series - Nordic Duo / Nordic 2300 series / Nordic 2200. The set includes 4 pillows that act as supports for the bowl;
- Suntek Consul. Designed for both toilet and bidet. Seat material – duroplast (hard plastic). Fastener material – metal alloy. Model - any;
- Roca Mateo. The color of the product is silver, the material is metal. Suitable for mounting on any device.
Judging by the reviews, the quality of Roca's products is worse than that of other manufacturers. Seat seats often fail, and leaks are observed against the background of liquid leakage from the microlift. The main advantage of this manufacturer's products is their low price. But, given its unreliability, much more money is spent on repairing or replacing the structure.
The average cost of the system on the Aquasan company website is 1500-2200 rubles. You can also find seats with more advanced microlifts on sale, the price of which ranges from 3,000 to 6,500 rubles. More detailed information can be found on the website akvasan-shop.ru.
Process:
1. Find the nuts securing the seat and lid to the toilet. 2. Unscrew the nuts and slide their rubber washers so that you can adjust the opening angle of the lid. 3. Tighten the nuts and check the adjustment. 4. If the lid still does not open, try adjusting again; perhaps you just chose the wrong angle. 5. How to install a toilet - read our article.
When purchasing a toilet seat, a person, as a rule, does not think about fixing the lid. This is not surprising, because they consist only of a threaded pin and a nut, sometimes there are also gaskets, and the distance between the bushings corresponds to that on plumbing equipment. It is not difficult to understand the instructions and install the toilet seat.
Repair
Toilet seats also have to be replaced and repaired.
Problems under the shelf
If a seat with a separate shelf is replaced, a leak may occur during the work. Possible reasons:
The solution to these problems is to completely replace the rubber element. But sometimes one wire is enough. It is used to tighten the cuff in places of sealed contact with areas of plumbing equipment. An alternative is silicone sealant. But both options don't help for long.
Broken plastic elements
Under the influence of a point load (impact, falling objects) and weight exceeding the limits, the seats easily crack, deform or break. If you can’t replace the seat, you can bring the toilet seat into a condition suitable for temporary use. There are only two ways: gluing and fusion .
Many plastic products tend to dissolve when exposed to acetone. The liquid must be applied to the damaged area to be fixed. You can use the product after the material has completely dried. Dichloroethane works in a similar way. But you need to be careful with it, as it is toxic.
Superglue and quick-setting gel often contain cyanoacrylate. This substance has high adhesion to polymers. Therefore, with the help of such compositions it is also possible to carry out repairs by gluing.
If there are no chemicals or liquids at hand, then chips and cracks can be subjected to heat treatment. When heated, the edges of the plastic begin to melt. Just press it down and let it cool. And after that, the seams are sanded with an abrasive material with a fine grain fraction.
Broken toilet ears and shelf
The lack of additional support elements and incorrect installation of the tank lead to incorrect distribution of the load on an individual shelf. As a result, the ceramics may burst, that is, the ears break. You can make repairs using epoxy glue:
After installing the lid and tank on the toilet, it is recommended to provide the structure with additional supports. For example, you can place a beam under a shelf or lay it between a wall and a water container. If this is not done, then next time the scale of the breakdown may be larger and you will have to completely replace the equipment.
