How to make a cap from a newspaper - 19 original ways + tips

Home House and cottage Do it yourself

A newspaper cap is a cute and practical headdress that protects from the sun's rays. The biggest advantage of such a hat is that it can be made in a few minutes anywhere. To do this, you don’t need scissors, glue, or threads—it’s enough to know how to properly roll an ordinary newspaper. It is believed that it is correct to wear a classic cap slightly tilted to one side. Often this does not work out, since it is not always possible to choose the correct size of this headdress. There are no such problems with a paper cap; its main purpose is protection from the sun. In addition, a paper cap can be made very original. It is believed that a classic cap is a small cap, flattened on the left and right. But now a cap can be called an ordinary sun hat from a newspaper. All you have to do is use your imagination and from a sheet of newspaper you will get a cap in the style of a cowboy hat or cap with a visor. After all, modern designers on high fashion catwalks have been experimenting with this model of cap for a long time, why don’t we try to make something special out of the classic version of a military headdress?

So, to make a cap we need a spread of a regular newspaper. Some models of caps use a ruler, pencil and paper clips, but this is not at all necessary. We will be putting together the following cap options:

Classic cap
Pioneer cap
Budenovka pilot's cap
Square cap
Cap with visor
Aviation pilot
Rain helmet
Ordinary cap
Medical cap
Chef cap
Nurse cap
Cap
African cap
Square cap
Cowboy hat
Cap-Chinese cap
Elegant cap
Simple cap
Santa cap

Classic newspaper cap

A classic version of a neat cap, worn slightly to the side.

To make a cap, it is better to take a square from a newspaper with a side equal to the volume of the head plus 1.5-2 cm.

Fold the newspaper in half.
We bend each of the resulting rectangles in half to the center.
Then we fold part of the paper from the edge of the newspaper to the resulting fold line again.
We bend the upper corners into a triangle into the center of the model. We lift up the bent part of the newspaper from the edge.
Turn it over to the other side and bend it left and right along the fold lines. The result was a square with folds.
The bottom edge needs to be folded over the folds, then straightened.
Decorate as you wish with stickers.

Cardboard hat

A material such as cardboard will ensure the strength of the product. In addition, it will retain its shape for a long time. Let's look at an example of how you can make a hat out of cardboard with your own hands according to a drawing.

There are several models of hats made from this durable material. Let's look at a detailed diagram of how to make a hat - a cylinder out of cardboard, which will be a pleasant gift for a child.

Before starting work, take measurements from the head using a soft wire and transfer it to cardboard. This will become a template for the future design.

We draw narrow fields around the resulting circle. Moreover, we fix the marks on both circles in order to align them correctly. Next, cut out cardboard samples.

After this, on a smaller circle we make a rectangle out of cardboard and form a circle out of it. We fasten the parts with glue. It is advisable to maintain a perpendicular line between the folds and the cut line so that the structure holds its shape firmly.

Let's start working on the top part. Glue the resulting small circle on top of the cylinder using glue

It's time for decoration. Here you can show your imagination and decorate the structure with flowers or bright ribbons. For lovers of extravagant models, you can decorate your headdress with berries or plastic fruits.

Pioneer cap

A cap of a slightly modified shape that can be worn not only on the side, but also in the middle of the head.

Fold the newspaper spread in half and fold it over to mark the center line.
We bend the corners of the center line towards the center of the model.
We bend one layer from the bottom up and up again.
Turn it over. We bend one side on the side about halfway, then the other too. We bend the bottom edge of the model along the bottom edge of the rim.
We unfold the cap and bend the small corners from below to the intended line.
We fold the paper up again, then up again.
We turn the model over. We first bend the large corner down and then hide it.

Hat with brim

It won't be that difficult to make a hat with a brim. Moreover, the detailed diagram will become clear to school-age children.

Let's describe the entire algorithm for creating a hat.

Take any newspaper and make a square piece out of it. Bend this sheet in half, and then in half again so that the bends are outlined;
Then unfold the paper so that you are left with a double rectangle. Tuck the hidden corners inward, but do not connect the folds along the edges;
Open the last folds from the inside and press a little along the entire workpiece. Turn the workpiece with the wrong side up, following the fold lines, bend the edges towards you, and then fold the “sides” here on all sides;
Straighten the hat, press it down a little and you can wear it for an evening walk.

Budenovka pilot's cap

A functional cap model that is very convenient for sun protection.

Fold the newspaper spread in half, then fold it in half on the other side to mark the center fold line.
We unfold and along this line we bend the corners on one side and the other.
We bend the rim from below, turn it over to the other side and also bend the rim.
We bend the corners at the bottom to the opposite side. This results in an isosceles triangle.
We unfold the model along the side fold line so that the cut shape takes the form of a square.
We bend the corners from the bottom towards the center of the model. The pilot is ready.

How to weave from newspaper tubes. For beginners

Weaving from newspaper tubes or, as they also say, weaving from paper wicker is becoming increasingly popular among handicraft lovers. Thanks to this simple technique, you can decorate your interior, create accessories and delight your loved ones and friends with gifts. You can start getting acquainted with newspaper weaving by creating a hat with your own hands. By weaving a shape from prepared tubes, you will not only have an interesting time, but also make an original accessory.

Materials:
- newspaper or paper tubes
- glue
- clothespins
- cardboard circle
- blank template.

How to make a hat from newspaper tubes

If you have already tried to weave a hat from tubes and it didn’t work out, don’t worry. Perhaps you forgot to use a template, because only experienced craftsmen with a lot of practice can afford to do without blanks.

Materials for making a hat from newspaper tubes

At the beginning of weaving practice, it is not necessary to purchase a template; it can be replaced with a bowl of the desired size. Cardboard will be needed to create the fields. A circle of the required size is cut out of it.

The tubes are rolled from newsprint or wide cash register tape. The method of twisting from cash register tape is the same as from newspaper sheets.

If it doesn’t work right away, try securing the parts not only with clothespins, but with masking tape and glue or tape.

Beginner hat makers should choose an easy weaving option, without complex transitions and patterns.

This will help you focus on the weaving process and master the main features of this craft.

Adsense

We connect eight tubes in pairs and place them crosswise on a circle of cardboard. For convenience, we secure them with clothespins.

The work continues with a new tube with sequential weaving in a circle, until the desired size of the bottom of the cap. In this case, the paired tubes must be separated and intertwined separately.

You need to prepare enough tubes for the base of the hat so that the brim of the hat is denser.

Having given the hat the desired shape, proceed to creating the brim. For this you will again need a cardboard circle. The blank is placed on it exactly in the center, attaching the paper tubes of the base to the cardboard circle with clothespins at regular intervals.

At the same time, decide for yourself whether to pull out the blank bowl or not; it all depends on how convenient it is for you to work with newspaper tubes and how well you have mastered this technique. To maintain uniform weaving in a circle, you will have to remove the clothespin, no matter what it interferes with the weaving, and fasten it again. The job will be much easier once you gain a little experience.

After weaving the brim of the desired size, the working tube is cut off, hidden on the inside of the cap and secured with glue. To be on the safe side, you can also apply glue along the edges of the hat.

It is better to paint over the newspaper font when the product is ready. To do this, the hat is coated with white acrylic paint with PVA, and then tinted with any color or stain. If desired, it can be decorated with flowers and ribbons.

That's all. Your newspaper tube hat is ready! Admire, wear, decorate your interior or give to your loved ones! After you have mastered the basics of newspaper weaving, try making more complex products from newspaper tubes.

Square cap

An unusual version of the cap, which fits tightly to the head and has a visor.

Fold the newspaper in half and then into a quarter to locate the center line.
Open it up and make a triangular roof.
First fold the rectangular strips into 2 halves, then bend them.
Turn the model over and bend the edges from the sides towards the center of the model.
Let's fold regular triangles in both corners.
We bend the triangular roof and tuck it in.
Open the model and align it to form a square.
Rotating, bend the corners, open.
We turn 4 corners. The result is a hat in the shape of a box.

Stewardess headdress

A distinctive feature of this accessory is its deep fit. In addition, such products are made in blue or light blue. When making a flight attendant's hat from paper, you will need a rectangular piece of paper. Its width should be slightly larger than the length of the future cap. This is due to the fact that the side parts will bend by a quarter.

The following master class will help you do this:

The rectangular sheet is folded into two equal parts, but always in length.
The upper edges bend toward the middle by about a third.
The bottom edge is initially bent in half, and then folded up so that the corners of the resulting model protrude slightly to the sides.
The future cap is turned over, and both sides are turned up approximately a quarter.
After this, the element located below is bent twice by approximately a third.
The top of a classic hat is folded inward.

At this stage, the flight attendant's paper accessory is ready. Additionally, it is recommended to paint it in a suitable color.

Cap with visor

Fold the newspaper in half, then fold the other side in half to mark the center fold line.
We unfold and along this line we bend the corners on one side and the other.
We bend the rim from below, then turn it over to the other side and crimp the corners of the rim.
On the left and right we fold the model to the center fold line.
We fold the strip of paper from the bottom to the middle, bending it in half.
Then we bend the corners of the rim towards the center of the model and tuck it into the middle.
We turn the model over. We fold the largest upper corner towards the center of the model and tuck it under the rim.
We unfold the model, pressing it a little in the center. The cap is almost ready, all that remains is to bend the corners at the top and hide them under the paper.

High cap

The first thing that comes to mind when looking at this model is a Halloween witch hat. Although a pointed cap would also be suitable for a wizard. The headdress folds up easily and quickly, in just a few steps.

Step by step description:

We bend the original square in half from bottom to top.
Fold the left side along the dotted line.
Then the right one.
We bend the protruding bottom flap.
On top of it is the second one.
We open the product from the inside and round it into a cone.

Ordinary cap

In order for the product to turn out neat, it is better to make fold lines along special pencil marks.

First, we outline the fold lines so that the work turns out neat. We fold the rectangular spread of the newspaper along a larger diagonal to mark the fold line, first on one side, then on the other. Then fold the newspaper in half to mark the center fold line.
Now let's get to work. Fold the newspaper diagonally to form an isosceles triangle.
Now we fold the corners up along the intended fold line so that we get a square.
Fold the corners in half again, then in half again to mark the fold line.
Then we fold the corner along the intended fold line so that the edge sticks out outside the model.
We do the same on the arc side. The result was a square with the edges of paper sticking out on both sides.
Now we take the opposite corner and fold one layer to the center of the square, leaving about another 1 cm of layer for the rim.
We turn up the rim.
Turn the model over to the other side. Fold it in half corner-to-corner.
We unfold the model and hide the bottom corner inside the cap.

Tips for working with paper

To make your creative work satisfying, you should heed a few tips:

you need to start creative work only in a good mood;
You should be responsible when choosing a place for creativity: nothing should interfere, there should be enough space and light;
When working with paper, you need to keep your hands clean so as not to leave marks on the product. If you have to deal with glue or paints, it is better to immediately prepare wet and dry wipes;
you need to remember that scissors are a sharp tool, you should not leave children with them unattended;
Before folding life-size origami, you should practice on a “draft” - an unnecessary sheet of paper;
For a homemade hat to look good, all lines and folds must be neat and symmetrical.

Following these guidelines will help you have fun and enjoy paper crafting.

DIY Harry Potter hat

DIY turnip costume for girls and boys

Medical cap

A round-shaped hat that can be used as an element of a fancy dress costume.

We cut the newspaper spread into two parts so that we get two identical rectangles. Let's put them together.
Fold the larger side of the folded together rectangles about 1.5 cm along the edge of the newspaper.
We do the same on the opposite side. The length of the fold should be approximately equal to the length of the paperclip.
Now we pull one sheet out of the other, but not all the way. And at the end we fasten them together with paper clips on both sides.
We roll the model in a circle and insert one sheet into the other from the opposite edge. Secure with paper clips.

Small elegant top hat for girls

The following instructions from megamaster.info will tell you how to make a paper hat that will decorate any holiday outfit. It is attached to the hairstyle using hairpins or a hoop. This accessory can be used not only by children, but also by adult girls. Such mini cylinders can be a good solution for photo shoots.

Prepare before work:

thick cardboard;
PVA;
glue stick and gun;
ruler;
corrugated paper;
paper for working using the quilling method;
braid;
scissors.

Before manufacturing, as in the previous version of the cylinder, we need to decide on the dimensions. There is no need to measure the circumference of the child’s head; the work can be done “by eye”. For those who are engaged in such creativity for the first time, we recommend using standard sizes; we will indicate them during the work.

And now the instructions on how to make a miniature paper hat:

Small elegant cylinder (Step 1)

Take a ruler and pencil. Draw a strip on the cardboard with a width of nine centimeters and a length of forty-two centimeters.
On the resulting strip we draw small stripes on the bottom and top. From the edge, each line drawn should be from one to two centimeters. Using the resulting strips, we cut out the cloves. They will help us glue all the resulting components together.
We fold the strip and secure it. Use glue. We recommend using a stapler, this way the work will be stronger. We cut off the resulting excess part during the folding process. (Step 2)
Make two circles. It is very important that they are level and match the required size. The first diameter should be twenty centimeters. It will be used as the brim of the hat. The size of the second circle should be twelve centimeters - this is the top of the product.
We take a cylinder that has already had its teeth and the largest circle cut out. We glue the blanks. Start from either side. After this you can glue the bottom of the hat.

Externally, the cylinder may seem ready. It needs to be decorated. We use corrugated paper and quilling techniques. After practice, you can indulge in fantasy.

So:

(Step 3)

We cut out a circle from paper, it should be smaller than the base, and apply it to the cap. We wrap the excess part inside and secure it with core glue. We decorate the top of the mini cylinder with braid;
We make flowers. Use paper that matches the color of the hat. Use a special stick to twist the strips. Form flowers. Use the same principle to make the leaves. Glue the resulting products to the cylinder.
To prevent the finished accessory from falling off your head, attach it to a hoop, you can use an elastic band or braid.

This is just an example of work, you can make the product any way you want, with larger or smaller margins and decorated as you wish

Cap - nurse's hat

A cap model for people with imagination. Can be used as an element of a fancy dress costume.

Fold the newspaper in half, then straighten it and fold it in half again on the opposite side to mark the fold lines.
We bend about 1.5 cm along the edge on one side and bend it.
Fold the model in half to mark the fold line.
Then we fold the model from the smaller side towards the center to the inflection line. We do the same on the opposite side.
When folded, it becomes a rectangle. Now we fold one of the corners so that its vertex is outside the model.
We do the same on the other side.
Fold the vacated rectangle towards the center. We unfold the model.

How to decorate

Paper hats made from whatman paper or cardboard are subject to decoration, namely painting. This material does not become covered with waves after contact with water. For this purpose it is better to use gouache or acrylic paints. It is possible to color paper not only after making the headdress, but also before work.

To decorate military caps, they often use a red star made independently from colored paper, which is glued to the product. You can decorate your headdress with a flag. St. George's ribbon is often used to decorate caps on Victory Day.

Themed paper hats are decorated to match the costume. For these purposes, you can use the following additional details:

sparkles;
buttons;
ribbons;
beads

You can glue an applique in the form of a red cross made of colored paper onto a medical cap. You can also draw it using felt-tip pens, paints or gel pens.

Cap-shaped cap

A cap with a visor that covers your head well.

We fold the corners of the newspaper, smoothing the folds well so that the cap holds tighter.
We wrap the strip from the bottom twice towards the center. The result is a headband.
Take the sharp edge at the top and place the corner under the rim.
Turn the model over and fold the newspaper on the sides to the center fold.
Fold the strip from the bottom in half towards the center. Then we fold the corners towards the center and hide them under the rim.
We unfold the cap and tuck the corners at the top under the rim.

Square cap made from newspaper

A cap that completely covers your head from the sun.

Bend the corner of the newspaper to the opposite side.
Bend the strip of paper upward at a folded angle.
We straighten the newspaper.
We bend the opposite corner in the same way.
Straighten and turn over the newspaper. We bend the rectangular strip on the opposite side.
We place the opposite edge on the folded strip so that we get an “envelope”.
We unfold the newspaper. The fold lines that intersect in the center should be clearly visible.
Using your finger, bend the center of the intersection of the fold lines upward and fold the sides of the newspaper together in pairs. You will get an isosceles triangle with a free rectangular strip of paper at the bottom.
Fold the triangle in half so that equal angles overlap each other. When we unfold the triangle, we can see the center of its base.
We turn equal angles on both sides towards the center of the base slightly with a grip.
We turn the model over. We fold the strip of paper at the bottom of the model by about 1 cm.
We bend the sides on the left and right to the center of the model, while the corners from below need to be tucked into one another.
Bend the top corner of the model to the center.
Then you need to take a layer of paper at the top angle and unfold the model. The result was a cap with a visor.

Decor options

There are many ways to decorate such a headdress. It is important that the design of the product and its color scheme do not fall out of the general style of clothing, but complement it.

You can decorate such a hat with lace or braid, corrugated paper or fabric.

The product can be complemented with paper flowers, a buckle or a brooch.

To prevent the headdress from moving off the head, it can be glued to an elastic band or hairband.

Cap - cowboy hat

An original headdress that has a concave brim and looks like a cowboy hat. We will need two complex square sheets of 50 by 50 cm. The larger the squares, the larger the finished product will be.

Fold the newspaper in half. Then fold it in half again on the other side.
Unfold the newspaper and use a ruler to mark 4 cm to the left and right of the center fold line.
We bend the corners so that 4 cm to the left and right of the fold line from the fold line remain free.
Next, you need to move your hand inside the folded corner of the newspaper and bend it along the bisector.
Let's do the same on the opposite side.
Turn the model over and bend the corners along the fold line.
We turn the model over. Fold the bottom corners of one layer of newspaper toward the center.
We turn the model over again and bend the corners from the bottom to the center on this side.
Now we fold the side strip to the center by about 2 cm and bend it again.
We turn the model over and do the same on the opposite side.
Let's open the model. The result was a cap.
We bend the corners on both sides and straighten them.

It is important to press very hard when folding the paper so that the model holds its shape well.

What paper can you use to make a hat?

The paper is selected depending on the type of hat. Most often, a headdress, such as a painter's hat or a children's panama hat, is made from a magazine or newspaper. For doctor's caps, thicker paper is suitable - whatman paper in A1-A4 format, for caps - a single-color (green or blue) sheet. It is recommended to make a pirate or cowboy hat for children's scenes from cardboard, and a cap from thick wrapping paper.

When choosing a material, keep in mind that sheets that are too soft or thin cannot be used. They will not hold their shape and will tear quickly.

Cap - Chinese cap

We make a square sheet of newspaper. Fold the sheet in half and unfold it.

Then fold it in half on the opposite side.
Bend the edge of the paper about 2 cm.
We turn the model over and bend it on both sides to the center bend line.
Then we bend the corners from the top layer of paper diagonally across the rectangles so that they look beyond the edges of the model.
Bend a strip of paper from the bottom towards the center.
We straighten the cap and press down the upper part.

How to make a paper hat without glue: diagrams and description

In addition to the classical methods, there are more complex schemes for assembling a paper headdress with and without glue. Without an adhesive, a children's or adult skullcap, a light wide-brimmed newspaper hat, or a samurai helmet for a child can be quickly made using the origami technique.

Paper skullcap

You can create a skullcap with your own hands from hard paper or printing sheet, which is folded in 2 layers for greater density. It is made according to a pattern similar to folding a cocked hat, only in the case of a hat the outer corners are folded completely, and in a skullcap the upper corners are turned away at a short distance from the middle. The workpiece is trapezoidal in shape.

If you need a headdress made of cardboard in an oriental style, the headbands are decorated with a beautiful pattern. You can paint it yourself with artistic paints or paste it over or trim it with ribbons with colored embroidery.

When the side triangular protrusions are pulled out, the product turns into a jester's cap. If you pull out another protrusion and straighten all 3 corners, the skullcap becomes an academic cap.

Paper hat with brim

A paper hat with a brim made from a magazine or newspaper sheet is suitable for giving and relaxing. It can be made in a cowboy style. To make a hat from a newspaper, you need to follow these steps:

A newspaper sheet is folded in half.
The resulting rectangular figure is bent in the center and unbent. This is the middle of the hat.
The upper corners are turned inward towards the center.
The lower part is bent towards the turned corners.
The product is turned and operated in a similar way.
One more lapel is made on both sides. The workpiece looks like a rectangle at the bottom and a triangle at the top.
The product is stretched in the center. It turns out to be a square.
Opposite corners are wrapped diagonally.
In the formed triangle, pull the central points and unfold the model. A new square has formed.
The upper corners are stretched. At the final stage, the corners are not fully stretched, otherwise the hat will turn into a ship with large sides.

Paper samurai helmet

Without glue and scissors, you can make a samurai helmet from just one piece of paper for a children's party.

Instructions for assembling a paper helmet:

Take a square sheet of paper.
Fold it first along one diagonal, then along the second.
Close the sharp corners in the resulting triangular figure.
The bottom edges of the top layer are folded upward.
Bend the resulting folds symmetrically on both sides.
The lower part of the top strip is folded slightly below the line of the future bottom.
The bottom layer is folded onto the bent corner.
Turn the product over and make a fold along the bottom line.

Elegant cap

Fold a rectangular newspaper sheet in half lengthwise to mark the center fold line of the larger side.
Then unfold and fold in half widthwise.
We fold the corners on both sides towards the center and iron them with our hands.
We bend the rectangular strip from below towards the center of the model 2 times.
We turn the model over and do the same on the reverse side.
Turn the model over and bend the corners to the center bend line.
We straighten the corners and bend them in the other direction - up along the resulting fold lines.
When folded, bend them towards the center of the model and tuck the edges under the rim.

Selecting a model and size

Before starting work, you should decide on the size of the paper sheet. For children, it is preferable to make a cap from the traditional A4 format. For teenagers, as well as for adults, it is more appropriate to use a newspaper spread. It is softer and will be the best option for a homemade cap. In addition, this material is the most affordable. The following types of caps can be made from paper:

traditional;
pioneer;
medical;
budenovka;
toque;
with a visor.

If you use a rectangular paper sheet, you will get a pointed cap. To make a model with a flat top, it is recommended to prepare a square-shaped canvas.

Budenovka

Medical

Pionerskaya

Povarskaya

With visor

Simple cap

The easiest way to make a cap from a newspaper in a hurry.

We make a square from a newspaper sheet and fold it in half.
We bend the corners of the model, grabbing approximately 1/3 of the length of the side on both sides. 1/3 of the side of the square in the middle remains free.
Bend a strip of paper at the bottom of the sheet towards the center by about 2 cm.
Turn the model over and bend the corners to the center by about 3 cm.
Then we bend a strip of paper from the bottom of the model towards the center along with the folded corners.

LiveInternetLiveInternet

Santa cap

A variant of a paper hat for a New Year's masquerade. This hat can be rolled up from newspaper very quickly and will bring real fun to the children.

Mark the inflection lines. We fold a square sheet of newspaper diagonally.
Using a ruler and pencil, mark 1/3 of the side of the square. You can roll the paper into a tube and smooth it a little. When we unfold it, two stripes will be visible - the 1/3 marks.
From the side of the mark, bend the corner of the square diagonally to the mark. We bend the opposite corner towards the center. Fold both corners into an envelope.
Unfold the paper. An isosceles triangle is visible at the top, indicated by inflection lines. You need to attach each side of the triangle to the base.
We fold the opposite corner with the top to the base and fold the strip twice from the bottom.
We fold the opposite corner to the base of the triangle and smooth it.
From the point where the folds intersect, bend the model so that one of the edges protrudes approximately 1.5 cm from the edge.
We bend the opposite side in the same way.
We bend the paper protruding beyond the edges of the model back and straighten it.

Thus, from a simple newspaper that is always at hand, you can make a huge number of interesting caps that will protect you in sunny weather.

Paper Samurai Helmet

Let's first decide on the purpose of our future paper hat, and then immediately start making it. For example, a samurai helmet is perfect for children to play in the game. It folds up surprisingly simply. Our step-by-step instructions will help make your child happy with a new gaming attribute in 2 minutes. Let's get started?

Prepare a sheet of paper in the shape of a regular square (see Fig. 1). Fold the piece of paper diagonally, and turn the resulting triangle into a square, bending the sharp corners towards the top;
Bend the lower corners of the “front” side to the opposite corner, and then bend the upper corners outward again, forming “ears” protruding beyond the boundaries of the blank;
The Japanese paper hat is almost ready. Bend the lower corner of the upper plane upward, slightly overlapping it over the bends of the workpiece, fold the bottom again, fixing the shape;
Turn the hat over to fold up the “extra” corner on the back side, unfold the product - you have learned how to make a paper hat with your own hands for your fidgety shogun.

By the way, you can also make a paper shuriken star for a complete set.

Newspaper cap - step-by-step instructions for making original caps with examples