We choose the appropriate bathroom cleaning products: for all types of bathtubs, showers, tiles and other surfaces + Reviews

Home » Reviews and Ratings

Svetlana Shevtsova 10/16/2018

5473 Views

A bathroom is a room that needs careful and careful care. The room is subjected to high operating loads, quickly becomes dirty, and due to the high level of humidity, fungus or mold may appear here. Not only the font needs cleaning, but also the walls, usually covered with tiles, shower cabins, sinks, and chrome plumbing fixtures. Departments with household chemicals in today's stores are bursting with an abundance of domestic and imported products for every taste and budget. Some 30 years ago, housewives did not know a better solution than baking soda and table vinegar, but today they can choose an effective composition for any surface. Choose the smell, consistency, properties, reasonable price, as well as the direction of action of the product.

What are we going to fight?

Read also: Which laminate is better for the bathroom: types, properties, tips on selection and proper installation, 6 best manufacturers

Special cosmetics will help get rid of rust and ingrained yellow plaque.

What types of contaminants are most often found in a washroom?

• First of all, it's rust. It forms on the walls of the container if the tap water contains too much iron.
• Residue from soap and shower gels. It can be easily washed if you regularly rinse the walls of the vessel after bath procedures. If you neglect this recommendation, over time the soap will eat into the surface and make it more difficult to clean.
• Lime deposits. Appears over time, its main cause is increased water hardness.
• The longer the service life of the hot tub, the more noticeable the yellow coating may be. This is especially true for old cast iron and enamel containers. The bathtub turns yellow if there are old pipes in the bathroom
• A humid microclimate is a haven for mold and mildew. They accumulate in hard-to-reach surfaces, for example, in tile joints, along sealants, in corners, between parts. The fight against microorganisms must also be carried out because they are dangerous to health
• Stains appear as a result of careless handling of aggressive compounds, for example, hair dye, potassium permanganate, brilliant green, alcohol markers, etc.
• Pollution after repair work

Old enamel vessels give housewives particular trouble - they are usually covered with cracks in which dirt accumulates. Cleaning these areas is very difficult, and special household chemicals are often indispensable.

Criteria for choosing a cleaning product

Read also: TOP 8 Best ceiling paints: priority on reliability and durability. Review of the most popular manufacturers

Modern household chemicals are a salvation for housewives

Let's consider what qualities a reliable product should have:

1. The composition does not contain abrasive elements that, when rubbed, destroy the coating. It is advisable to lean towards gels and liquids. Or choose powders that, after contact with water, turn into a soft, homogeneous paste
2. The composition should not contain concentrated acids that corrode surfaces
3. The product must be designed to combat all types of contaminants: rust, plaque, stains, mold, odors
4. Antibacterial and antiseptic properties are important
5. Buy a product designed for your surface type (enamel, acrylic, cast iron, tile)
6. Avoid products with strong odors. Any contact with such household chemicals should occur with protective gloves.

Preparations for bath disinfection

Most all-purpose cleaning solutions contain antibacterial additives. Their action is sufficient for regular cleaning of plumbing fixtures.

Additional disinfection is carried out using low-toxic preparations that can be used for household needs.

Recommended disinfectants:

1. Famidez . Concentrate with detergent and anti-corrosion properties. Does not cause sensitization, practically odorless. Active against most bacteria, some viral agents and Candida fungus.
2. Maxi-Dez . Odorless liquid. Has bactericidal and antifungal effects. Mixes well with water and does not fix protein stains on surfaces.
3. Fan . Multifunctional biodegradable product with moderate foaming. Cleans, degreases, exhibits bactericidal and fungicidal properties. Safe for people and animals.
4. Defect . It has a cleaning, deodorizing and prolonged antimicrobial effect. Active against bacteria, fungi, viruses. Does not damage processing objects.

For disinfection, it is recommended to use products with a mild effect.

The use of compounds containing active chlorine, phenols, volatile aldehydes, and aggressive acid compounds should be avoided. They damage the bathtub coating and are unsafe for health.

Caring for an enamel bath

Read also: Latex paint or acrylic: what is the difference and which one is better to choose for different types of work (Photo & Video) + Reviews

Enamel bath

The main rule is that it must be regular and timely. Stains can become deeply embedded in such a surface in just a few days, so it is important to remove them immediately. Choose cosmetics designed to clean enamel.

It is allowed to use powder or paste-like substances. It is advisable to apply them to the walls with generous foam and wait a quarter of an hour. Then rub the enamel well and rinse with water.

Caring for an enamel bath

Carefully read the composition of the drug - there should not be any aggressive acids that can corrode the sensitive coating. Do not use metal brushes or sponges.

The best manufacturing companies

Today, companies offer a wide range of cleaning products for bathroom care. Liquids and powders, regardless of manufacturer, are mostly of excellent quality. Product options differ not only in manufacturer and composition, but also in purpose.

There are options intended for home use, and there are professional ones that cost an order of magnitude higher. It is not necessary to use them at home; you can choose more affordable products.

The most common and recognized brands include Frosch, Comet, Cif, Cilit Bang, Bass and Oricont. All of the listed brands have proven themselves excellent in the production of cleaning ingredients for baths.

Cleaning acrylic bathtubs

Read also: The best antiseptics for wood: how to choose a protective impregnation against fungus (Photo & Video) + Reviews 2018

Corner acrylic font

Such a font requires careful care, especially if the acrylic thickness is less than 1 mm. It is forbidden to pour hot boiling water, alcohol, formaldehyde here; it is forbidden to use metal scrapers or various solvents. To ensure that the bathtub pleases its owners with its pristine glossy shine for a long time, clean it with special gels designed for acrylic surfaces.

Cleaning the shower stall

Read also: How to choose an electric heated floor: comfort and reliability of autonomous heating

Care involves high-quality cleaning of glass walls and doors, metal parts, as well as acrylic or plastic containers.

A clean shower stall shines and looks like new.

There are special complex cosmetics on sale that can be used to wash all of the listed surfaces. Be careful, never wash the inside of the shower stall with the doors closed, as you can inhale harmful fumes from household chemicals.

How to clean tiles in bathrooms

Read also: How to choose the right pillow for a comfortable sleep: 17 best fillings made from natural and synthetic raw materials + Reviews

Tile does not require complex maintenance

The tile is very easy to clean due to its smooth structure. Don’t let the walls get dirty; wash them at least once a month. By the way, if you run out of the special product, a regular soap solution will do.

The nuances of cleaning a bowl with hydromassage

Hydromassage systems (jacuzzi) require regular cleaning.

You can remove dirt and unpleasant odors using gentle household cleaners for acrylic bathtubs. It is better to use products with reduced foaming.

In this case, you must adhere to the recommendations specified in the operating instructions for the sanitary ware.

General rules:

1. Fill the tank with hot water.
2. Add the required amount of cleaning solution. In models with a built-in disinfection system, liquid is poured into the corresponding compartment.
3. Run the system for 10-15 minutes.
4. Drain the water and wash off any dirt stains.
5. Take cold water. Turn on the installation for 10 minutes.
6. Drain the water and rinse the surface.

Treatment should be carried out every 2-3 weeks. If the system has been inactive for a long time, the procedure time increases to 1 hour.

To clean the injectors, remove stubborn dirt and provide high-quality disinfection, you will need the help of special tools.

Popular brands:

• Glutoclean (Germany);
• HG (Netherlands);
• Mellerud (Germany);
• Cascade Complete (USA);
• Glutoclean (Germany);
• Bagi (Israel).

Cleaning the bathroom with folk remedies

Read also: 12 Best upholstery options for a sofa: review of rating materials, selection criteria when purchasing + Reviews

Baking soda and table vinegar are the best helpers for cleaning bathrooms

We offer a list of effective bathroom cleaning compositions that can be prepared at home:

1. Ammonia, lemon juice, and table salt mixed with table vinegar are great for rust.
2. A mixture of soda ash and baking soda, added in equal proportions, removes plaque.
3. Mix alcohol and hydrogen peroxide in a 1:2 ratio. This composition effectively removes rust
4. Limescale can be cleaned with baking soda or vinegar. Citric acid also works great - dissolve 100 g of the substance in 0.5 liters of water
5. Activated carbon crushed in white will protect you from mold. Apply the mixture along the seams and wait 10 minutes, then rinse with warm running water.

Make sure that the chosen folk recipe is suitable for your bath. Some components can have an aggressive effect on sensitive modern coatings.

VIDEO: Snow-white bath in 5 minutes with a miracle remedy

We choose the appropriate bathroom cleaning products: for all types of bathtubs, showers, tiles and other surfaces + Reviews

VIDEO: How to permanently get rid of fungus in the bathroom

We choose the appropriate bathroom cleaning products: for all types of bathtubs, showers, tiles and other surfaces + Reviews

Main causes and types of enamel contamination

Enamel is a powder that is applied to the inner surface of a cast iron bathtub using an electrostatic method and subsequent “baking” in a special heat chamber.

And although cast iron itself lasts from 25 to 50 years without problems, the enameled coating is much more sensitive to all sorts of external factors. That is why it needs careful and proper care.

Enamel is especially susceptible to several types of contamination:

1. Rust.
2. Limescale.
3. Fat deposits.

The reason for the appearance of unsightly brown stains on white enamel is often iron salts that constantly fall onto the surface from old pipes. Sometimes the problem lies in a faulty leaking faucet, a metal chain for attaching the outlet cover that oxidizes when exposed to water.

The enamel used in old cast iron bathtubs usually contains zirconium elements. They increase the strength, elasticity and heat resistance of the material, but are not able to resist rust. Over time, microcracks and scratches inevitably appear on such bowls, through which corrosion acts directly on the metal

In the manufacture of new baths, improved surface treatment techniques are used, involving the use of titanium salts. These components make the coating structure smoother, which significantly reduces the likelihood of cracking.

Limescale usually appears due to poor water quality, which depends on the region, the sources and treatment technologies used, and the condition of local water supplies.

Various impurities, chlorine, metals, mineral salts contained in the liquid increase its hardness and are deposited on the surface in the form of a whitish coating.

Fatty deposits are the consequences of particles of skin, sweat, and dirt settling on the walls of the bathtub, which are washed off by a person while taking a bath. Layering on top of each other, they form a persistent, difficult-to-remove coating of fat.

All types of pollution require a special approach. To remove and clean certain of them, it is necessary to use special compounds that can be purchased in the store or prepared independently from available home remedies.

TOP 10 Best products

Read also: How to choose a good adhesive for non-woven vinyl wallpaper: tips, brand ratings and gluing process technology + Reviews

The display case with household chemicals includes dozens of brands

Choosing a product for cleaning the bathroom can take a lot of time. Not every woman likes to study instructions and colorful labels on bottles and vials. Most often, we buy a familiar product without delving into the huge assortment.

We offer an overview of the most popular formulations, reviews of which indicate their quality and high efficiency.

Table: general description

Let's study drugs from different price segments:

1 Cillit Bang is a powerful compound that is suitable for all types of surfaces. It sprays quickly, does not require soaking, and penetrates deeply into plumbing fixtures, cleaning even old dirt. Among the disadvantages, users note an unpleasant, pungent aroma and the need to work in protective gloves.

Cillit Bang – Active foam

2 Frosch is a product with a safe, natural composition, so gloves are not required for cleaning. The main active ingredient is grape acid. The product perfectly removes lime deposits, dirt, traces of soap solutions, and it also smells pleasant.

Disadvantages include a weak antibacterial effect and low effectiveness against stubborn stains.

Frosch – environmentally friendly cleaner

3 CIF Ultra White - products of this brand are characterized by a very gentle effect even on sensitive surfaces. Foams well, goes on slowly, smells nice. Doesn't cope well with mold and old stains.

CIF Cream Ultra White

4 Comet gel is an antiseptic for cleaning any plumbing fixtures. Its main advantage is its long shelf life - after washing, an invisible antibacterial film remains on the surface, which lasts for 3-5 days. The gel copes well with rust, plaque, dirt, fungus, and mold.

Suitable for washing tiles, ceramics, enamel, you can add the product to the water for washing the floor. Cannot be used for cleaning acrylic containers due to acid content. Wear gloves and do not apply the product to colored textiles.

Comet is a product with double action: cleansing and disinfection

5 Bugs Acrylan - a product for the care of sensitive surfaces. You can wash your plumbing fixtures immediately after spraying the spray. Effective against heavy dirt. Disadvantages include high price and unpleasant odor.

Bagi Akrilan - a preparation based on citric acid

6 Sanox gel acts quickly and efficiently - it removes even hopeless lime deposits and rusty streaks on the walls of the vessel. It is not advisable to use it for acrylic and enamel bathtubs, but if you apply it and rinse off immediately, the risk is minimal. Wear gloves and use the product no more than once every 10 days.

Sanox Gel

7 Unicum spray is a highly effective product that gently cleans plastic and acrylic. It easily removes grease, dirt, deposits, rust, and mold. Disinfects the coating well.

Unicum Spray

8 Domestos is a universal preparation for different types of coatings. Removes bacteria, mold, quickly cleans, whitens. It is used very economically.

Domestos

9 Toilet duck is a gel that can be used to clean bathtubs, toilets, and sinks. Apply the product to the surface and wait 10 minutes. After treatment, the sanitary ware sparkles white, smells fresh, and becomes perfectly clean.

Toilet duckling

10 Pemolux Soda Effect - powder based on baking soda at a low price. To clean the coating, apply the composition to a sponge and rub vigorously in contaminated areas. Be careful with sensitive surfaces.

Pemolux

Conclusion

There is no universal preparation that is suitable for any bath and will appeal to all housewives. Choose a product whose properties will help bring your plumbing fixtures into a “ceremonial” appearance. Don’t skimp on the cleanliness of the bathroom and the health of your loved ones - even if a bottle costs more than a pack of soda, but you will be one hundred percent sure that the bathroom is in perfect order.

Tips for choosing an effective composition

Bathroom cleaning products must cope not only with layers of dirt and soap deposits, but also with traces of limescale, rust, mold, and unpleasant odors.

It is important that they work quickly, do not leave streaks, do not shorten the life of the bathtub, and are safe for health.

Experts recommend refraining from using powder products, giving preference to liquids, sprays, pastes, and gels. These types of chemicals clean the surface being treated well without leaving scratches or erasing the enamel.

Each release form has its own characteristics:

1. Solutions are affordable, effective, but quickly consumed;
2. Due to their thick consistency, gels are more convenient and economical, easy to apply and evenly distributed;
3. Sprays provide quick application and economical consumption of liquid, allowing you to clean hard-to-reach places;
4. Pastes and creams are easy to use, provide gentle cleaning, are less effective at removing stubborn dirt, and are more expensive.

It is not recommended to use bathtub cleaning powders.

The best bath cleaner should:

• suitable for processing this type of surface (enamel, acrylic, marble, etc.);
• do not contain abrasive components, strong acids, caustic alkalis;
• do not have a pungent odor, do not cause allergic reactions;
• exhibit disinfectant properties;
• have an acceptable cost.

Most products are universal and can be used for washing bathtubs, trays, shower cabins, sinks and toilets, as well as chrome parts and tiles.