How to clean a matte phone case
Special products for difficult stains Eraser Soap solution Toothpaste Chlorine bleach Soda Lemon juice or vinegar Vegetable oil or petroleum jelly
How to wash a silicone case from dirt and yellowness
Liquid soap Soda Alcohol Nail polish remover Toothpaste Citric acid
A mobile phone or smartphone is an expensive purchase that you would like to use for at least 2-3 years without thinking about repairs. Therefore, we immediately buy accessories that will ensure better safety of the gadget. This applies primarily to phone cases. They not only protect the phone from dirt and scratches, but also give it individuality, because everyone chooses a case with a pattern that suits them best.
Some will buy a case with rhinestones and flowers, some prefer cartoon and movie characters, while others prefer laconic colors. But no matter what your case is made of or what is depicted on it, you need to take care of it from time to time. Cleaning should be selected depending on the nature of the contamination.
We'll tell you about effective methods that will help you wash phone cases made of matte plastic or colored or transparent silicone.
Do not miss
- Do not miss
How to remove brilliant green from your skin: 16 ways to remove it from your face, body and hair
How to remove brilliant green from a matte case?
You can even wipe off the brilliant green from the matte silicone case. Acetone-based nail polish remover can help get rid of such difficult stains. It is recommended for areas where there is no print. Nail polish remover can very easily remove strong and corrosive stains.
Interesting materials:
What can you take with you to Israel? What can you carry in luggage on a plane? What can you bring to Israel from Russia? What can you take to China in your luggage? What can you bring to Crimea? What can you take in Ryanair hand luggage? What food items can you bring on a plane to Israel? What products can be brought into the USA? What is allowed on a plane and what is not? What can you hang on the wall?
Preventative cleaning
It will not hurt to know that every week you need to carry out preventive cleaning - it will help clean a clear or colored case and get rid of simple dirt - for example, fingerprints.
- Pour warm water into a container;
- Add liquid soap or detergent - a few drops are enough;
- Stir the soapy liquid and place the item for 10 minutes;
- Rub it additionally with a soft sponge.
Ready! These manipulations will help not only clean the silicone case, but also maintain its proper condition.
Find out if you can wash sneakers in a washing machine in another article.
But what if you are faced with serious problems? Let's discuss how to clean a silicone phone case from yellowing or a panel that has darkened.
Cleansing rules
The main disadvantage of silicone pads is that they get dirty easily and quickly, and the longer the stain remains on the surface of the accessory, the more difficult it is to return the soft material to its original appearance. The situation is complicated by the fact that the protective pad cannot be cleaned with any means. When washing the cover, do not use:
- chlorine-containing solutions;
- metal jaws;
- hard brushes;
- sandpaper;
- sharp metal objects (knives, scissors).
The use of chlorine leads to irreversible damage to the accessory: the transparent case becomes cloudy from this product, and yellow stains remain on the white surface, which can no longer be removed. The use of abrasive sponges and other hard objects leads to many scratches and abrasions appearing on the product, and the surface of the protective pad is also greatly deteriorated.
The main disadvantage of silicone cases is that they get dirty easily and quickly.
Cases are cleaned only after they are removed from the phone. This will protect the gadget from water and detergents and wash the silicone product not only from the outside, but also from the side where it fits tightly to the mobile, since a lot of dust and dirt also accumulate on the inside. Probably everyone knows how to remove a case from a phone: you first need to move the upper left corner of the cover, then move to the bottom and do the same, freeing the left side of the phone and carefully pulling out the mobile phone. Remember that you need to remove the accessory very carefully so as not to leave damage to it.
Toothpaste
“The silicone case has turned yellow, how can I clean it?” – such cries for help can often be found on the Internet. If none of the other available remedies are suitable, you can use toothpaste, which you can probably find on the bathroom shelf.
- Squeeze a little paste from the tube onto selected areas;
- Rub it in with light movements (you can use a brush with soft bristles);
- Leave for 10 minutes, then rinse with tap water.
Let's discuss how to wash a silicone phone case if it starts to get dark?
Nail polish remover
This method allows you to easily wash the ballpoint pen from the silicone case - but be careful! Do not use the product on colored covers as they may become cloudy and lose their color brightness.
An important condition that allows you to clean the ink from the pen is the absence of acetone in the composition!
The method of application is as follows:
- Soak a cotton pad with nail polish remover;
- Gently rub the affected areas;
- Rinse with tap water and wipe dry with a soft cloth.
How to clean acrylic from tiles?
To successfully get rid of problem stains, clean acrylic
It is better to apply paint as quickly as possible before it dries.
... For more effective cleaning methods, you will need the following products;
- "White Spirit";
- kerosene;
- refined gasoline;
- liquid used to remove nail polish.
Interesting materials:
What are banana pants called? What are the names of edible mushrooms of the boletus variety? What are the names of specialists who work in the frontend field? What are the names of the satellites of Mercury? What are these things called that go on headphones? What are the numbers on the right side of the keyboard called? What are the names of flowers that last a long time? What are the flowers that don't fade called? What are the depressions on the Moon called? What are the decorations on crocs called?
How to remove traces of glue?
To remove glue residue from the surface, any fat will do. It can be edible or cosmetic oil, even margarine. The principle of operation is that fat dissolves the adhesive and its residues will be easily removed from the surface. You need to select an oil, apply it to the glue marks and leave for 10 minutes.
Interesting materials:
How much hair can you have in the army? How many diagonals are there on a chessboard? How many enzymes are there in total? How many goals do Messi and Ronaldo have in total? How many goals did Dzyuba score in total? How many awards does Zhukov have in total? How many questions are there in the traffic police exam? How much milk is passed off as harmful? How long does old aluminum wiring last? How many gates are there at Domodedovo?
How to make a picture on a case?
Using a sublimation printer, you print the image you want to see on your case
.
Then, using a flat heat press, transfer the image onto the insert that comes with the case. After transfer, insert the finished insert into the case
.
Below you can see what your new case
.
Interesting materials:
How to check the verticality of walls? How to arrange 2 paintings on the wall? How to display photos on a wall without frames? How to calculate the number of panels per wall? How to calculate the volume m3 of a wall? How to calculate wall decoration? How to calculate tiles for a bathroom wall? How to calculate the thickness of aerated block walls? How to widen a doorway in a concrete wall? How to widen an opening in a plasterboard wall?
Is it possible to clean a silicone phone case?
Cleaning a silicone transparent surface of any color is not difficult and can be done periodically using available products. It is important to know what and how to clean your phone case.
It is not possible to wipe off the case without damaging it using all means.
The simplest way is to use a soap solution, which is evenly distributed over the surface with a soft sponge. You can also immerse the product in a soapy solution, then rinse in cool water and wipe dry.
There are transparent silicone cases that have a long service life.
There are other safe ways to restore a case.
From yellowness
Yellowing is the bane of transparent and white accessories. Oxidative processes that occur when interacting with natural oxygen lead to color changes. Using the gadget with sweaty hands also contributes to the appearance of yellowness.
The protective phone accessory must be used correctly.
You can get rid of yellowness if you know how to clean a silicone case in several simple ways, for example, daily cleaning the surface with wet wipes or washing in a soapy solution.
When choosing a light-colored case, don’t be too lazy to get napkins.
But if the accessory has been used for a long time, it may turn yellow “from time to time.” Then you will have to say goodbye to it and replace it with a new one.
The case has darkened
The product may not only turn yellow, but also darken. This process is caused by particles of dust and dirt “clogging” into the porous structure of the accessory.
Silicone easily absorbs paintable materials and dirt.
Simple operations with it will help restore freshness and purity.
- If the contamination is small, it can be cleaned with an eraser to remove dark spots.
- Can be washed with a soft washcloth and a soapy solution of any detergent.
- For more effective results, use laundry soap.
If the silicone surface darkens, you can use purified gasoline or lemon acid for care.
A soapy solution will help clean the case.
However, these are quite aggressive substances, so they must be handled and used with extreme caution and followed the rules and recommendations:
- For a safe procedure, you should use rubber gloves;
- when working, you need to make room so that nothing interferes with its implementation;
- remove food products;
- Do not trust cleaning to children.
Clean the silicone case carefully.
This cleaning method is most effective for complex stains and old stains.
Ink marks
For office workers, students and schoolchildren, you can often see traces of a ballpoint pen or felt-tip pen on silicone cases. They give the product a sloppy appearance, so many owners often change the protective coating without bothering to clean it.
There are many products that will help you wash your case.
However, getting rid of ink stains is not difficult:
- remove them using alcohol-containing liquids;
- use dishwashing detergent;
- clean with an eraser;
- use a solution of laundry soap in water.
There are many products that can help get rid of dirt on covers.
Traces of glue
Today you can find different types of glue on the market: stationery, PVA, carpentry, latex and others. Adhesive contamination is not so common, but freeing the gadget covers from glue residues is not so easy, but it is possible; will help in this matter:
- alcohol or acetone;
- various oils;
- vinegar;
- baking soda;
- exposure to hot air or cold.
Oils will help to cope with contamination of the case.
What not to use
In the manufacture of protective “clothing” for smartphones, predominantly the classic type of silicone is used. Durable and flexible material requires a delicate approach when it comes to contact with chemicals. When cleaning you should avoid:
- sponges made of wire;
- brushes with stiff bristles;
- sharp metal devices;
- solvents;
- gasoline, kerosene;
- chlorine bleaches and abrasive powders.
All this can harm the silicone, causing cracks, scratches and other deformations where dirt will accumulate. Chemical liquids contribute to the formation of bald spots or holes in the material, making the cover unsuitable for further use. It is easy to tear a damaged bumper while putting it on the gadget.
How to care for a matte silicone case
Among the silicone cases, which are widely available in a glossy version, fashionable matte overlays stand out as a separate group. In terms of their protective qualities, they are in no way inferior to transparent ones, they are soft and practical, and look impressive. But “matte” is their only difference from their glossy counterparts.
To make your phone look neat in a case, you should give preference to matte designs.
They effectively protect devices, but, like glossy ones, they turn yellow, darken, and become dirty. Cleaning methods and care rules are identical.
Alcohol
Alcohol will help clean marker strokes - there are two common options for using a universal liquid.
If there are small spots left:
- Moisten a cotton swab or cotton swab with alcohol;
- Rub selected areas;
- Dry the product.
If the affected area is large enough:
- Mix alcohol with water in a 1:1 ratio;
- Soak the cover in the solution for ten minutes;
- Remove it and rub the stains with a soft sponge;
- Rinse under water and dry.
Please note that this method will help clean a white or transparent case; colored items may be damaged. And it’s even better to know the washing symbols on clothing labels - they’re all here.
How to bleach a white case
Transparent or white silicone smartphone covers can be bleached. Depending on the degree of contamination, various substances are used, the acquisition and use of which is not difficult, including:
- toothpaste, without dyes and “hard” additives;
- alcohol-containing liquids;
- soda solution.
Restoring white color and transparency is possible with lemon juice. To check whether the silicone case will be damaged by using cleaning agents
Toothpaste whitens silicone cases.
substances, you need to conduct a kind of test on a small area of the product, which will show the possibility of their use.
The use of chlorine-containing preparations, as well as acetone, gasoline, and substances with added abrasives is undesirable.
