We recently bought a jacket for my husband, but at home we discovered that the saleswoman had forgotten to remove the magnet from the clothes, which for some reason did not work at the exit. Unfortunately, we had already thrown away the receipt, so we were afraid to return to the store with the jacket so that the seller would get rid of the magnet.
We decided to try to remove it ourselves. To begin with, I went online, where I was relieved to find out that this sensor does not have paint inside. After that, the husband carefully sawed the metal rod with a hacksaw and the sensor fell off the jacket without any problems. There wasn't even a hole left in the fabric. In this article I will tell you how to remove a magnet from clothes without ruining them.
Why do we need magnets for clothes?
If the buyer has not paid for the goods, then when leaving the store with it, the installed turnstile will begin to emit loud signals. The reason for this is a magnet on clothing, which can be unnoticeably attached. However, there are cases when the seller simply forgets to remove it and the access system does not identify the item.
It is quite difficult to get rid of a magnet at home if you do not know the solution methods. Before we look at options for removing magnets from clothing, it is strongly recommended that you check the product before leaving the boutique for foreign objects.
Boomerang effect or use a magnet against the “magnet”
The next method for removing magnetic locks from clothes will be virtually identical to what is used in stores. Again, find the face of the lock and the bulge on it that we tried to pick out earlier, and apply a powerful magnet to it. The cylinder will be pulled towards the magnet and press on the spring, which will allow you to get rid of the lock. But the magnet used for these purposes must really be powerful enough, since the cylinder is relatively heavy and it is not so easy to set it in motion. Especially if you decide to use the first magnet you come across, which is a souvenir item attached to the refrigerator. But a DC electromagnet will certainly help you.
By the way, an AC electromagnet used in a compressor that supplies oxygen to the aquarium can come to the rescue. However, first you will have to “break” it a little - remove the end plate, exposing the W-shaped core. Now again determine which side of the lock the bulge is on and bring it to the core. The magnet causes the lock to vibrate, pulling and releasing the cylinder and spring. All you have to do is guess the moment when the cylinder begins to put pressure on the spring and remove the plate blocking the lock.
We hope that from the variety of ways to remove magnetic locks from clothes , you will still find the most suitable one for you. Good luck fighting the castle and be careful when purchasing goods. This will save you from having to cheat in order to remove the lock.
How do anti-theft sensors work?
There are several options for anti-theft systems in stores. They all have a different look and shape, but perform one function - block the theft of goods. At the checkout, the seller removes the magnet with a special device. More often we see anti-theft guards in a round shape, which can be a hindrance when trying on hats or sunglasses. However, there are also more practical options in the form of a flexible tag, so that the buyer can conveniently try on clothes or an accessory.
Types of magnetic tags
There are 3 types of tags common in Russia:
- Tough. This is the option we most often see in stores. Hard tags are attached to the product and can only be removed using a special key. Some entrepreneurs use models that detect if the tag has been tampered with, that is, if you try to get rid of it, a signal will be given to the seller or security guard. For the convenience of buyers, a cable is attached to the magnet so that it does not interfere with fitting.
- Flexible. The tag is a sticker with a barcode. Its essence lies in invisibility. It is usually attached to that part of the clothing that the buyer does not consider. This could be the inside of the sleeve or the elbow area. The disadvantage of such a magnet is that it cannot be hidden on all products, but if detected, it can be easily removed.
- Tags with a special form of fastening. Such anti-theft systems are less common, but they are convenient for both sellers and buyers. The ability to change the shape or fastening allows you to install them on bottles, tools, small accessories and other things where a regular magnet is difficult to attach.
Go to the store for help
So, let's start telling you how to remove magnetic locks from clothes. The easiest way is to return to the store, no matter how far it is from your home. Just don't forget to bring your purchase receipt with you. Otherwise, troubles are possible - the likelihood that the sellers remember your face is not so high, and therefore accusations of theft may fall, and it will come to calling the police. It is not a fact that every store has cameras that could record your honest purchase. And by the time your relatives bring the check, a lot of time and unpleasant minutes will pass. By the way, this is another reason to pick up checks and keep them for a certain time.
If the store is too far from your home and you don’t want to return to it at all, then there is another option, how to remove magnetic locks from clothes . It will also require the involvement of third parties. Go with the purchased product to the store closest to your home and ask the sales consultants to solve the problem. Fortunately, systems that remove the lock from a magnetic lock are now installed in almost all stores, especially large ones. Again, don’t forget to take your receipt with you. This will protect you from unfounded suspicions and unnecessary troubles.
How to remove a magnet from clothes at home
All options for self-removal of the detector vary in complexity and practicality. If, when leaving the store, the turnstile did not work, then most likely there are capsules with paint in the magnet, which will complicate the removal procedure. Let's consider methods for solving the problem.
Thin hair elastic
The elastic band should be thin. We thread it between the top of the detector and the clothing so that it is tightly tied around the mount. Then we take the magnet from both sides and begin to scroll, pulling in different directions. During the process of removing the detector, the elastic band will protect your clothing from tearing.
Rubber band and regular pliers
This method is relevant for devices with paint. We wrap a rubber band around the metal rod located between the magnet and the clothing. Then, using pliers, carefully break off the convex part. We pull out the capsules with paint from there, and turn both parts of the magnet with our hands.
Tongs and lighter or candle
If the magnet has a recess in the upper part, this means that it contains paint capsules. They will stain your clothes if you try to remove them by force. Use a lighter or candle to melt the notch. As soon as it becomes soft, tear it off and, using tongs, carefully remove the capsules with the spring. As soon as you pull it out, the magnet will delaminate itself.
Hammer
Pack the clothing with the detector in a plastic bag and place it in the freezer. After 2-3 hours, take it out and hit the top of the magnet with a hammer. The method is complex and ineffective, since you need to use enough force, and there is a risk of damaging the goods. It also cannot be used on capsule tags.
Wire cutters
We tear off the convex part using wire cutters. This must be done carefully so as not to damage the capsules. After the inside of the detector has opened, we take out the contents, including the spring. We disconnect the magnet, moving both parts apart.
Knife
This method prevents the opening of sensors with capsules. We place most of the magnet end-to-end, then attach the knife to the middle along the form and press with all our might. After a cutout appears on the tag, we saw the structure along it. To avoid damaging your clothing, cover it with a cloth. Instead of a knife, you can also use a nail file or hacksaw.
Using a magnet
In specialized stores you can purchase a neodymium magnet with a powerful field. A square or rectangular object works more effectively. The more powerful it is, the easier it is to remove the detector from clothing.
Hit the floor
The use of this method is only relevant for tags without ink capsules. We take the clothing by the edge farthest from the detector and hit it on the hard floor. You need to hit so that the top of the tag gets hit. Once you hit the right spot, the magnet will disintegrate.
How to remove a magnet from clothes with an intercom
The intercom has a powerful magnet, which will serve us to remove the tag. Place the inside of the detector against the intercom and hold it tightly with your hand. Pull the upper part towards you and the magnet will disintegrate. A similar process occurs in stores, only with the use of a special tool.
What should you not do?
When removing a magnet at home, you need to follow safety precautions, as you can not only damage the product, but also injure yourself. In particular, this applies to the use of a screwdriver, knife, wire cutters and hammer.
To avoid damaging the detector itself, use only a special tool or buy a neodymium magnet. Alternatively, use the intercom method. All other options involve damage to the item. Also, do not forget that some devices will contain paint capsules that must be removed very carefully, otherwise you will stain yourself and the product. Use the option of burning plastic only outdoors or in a ventilated area.
It is impossible to remove a magnet without the use of special equipment, however, the above methods will help you get rid of anti-theft devices using available means available in every home.
Scams in G**noMobil
I decided to take a taxi home after work yesterday, since it was cold and the time was 11:00 p.m. I called a taxi as usual, the application told me that the driver would arrive in 6 minutes. Then the circus began, literally a couple of minutes later a notification came that the car had arrived, but it was not nearby. I decided to call the driver and simultaneously wrote in the chat
The driver dropped calls, and answered the chat only when he himself canceled my order.
As a result, I was debited for the entire trip and did not get it back. I went to technical support for justice, but apparently they also don’t care about clients.
Competent Roman asked to wait, well, ok.
As a result, I paid money only for freezing for 20 minutes while waiting for the driver. You can downvote, but at least I wanted to speak out and listen to who else has encountered the impudence of a taxi service.
