How to remove a magnet from clothes at home: how to remove a magnetic tag from a store

Funny incidents when leaving the store

Most often, the magnet remains on the purchased product due to the fault of careless store employees. Inattention, and sometimes even negligence of workers, leads the buyer to a dead end.

There are also newly minted sales consultants who do not yet know how to remove a magnet from clothing in a store. The most common cases when it is necessary to remove the anti-theft device are:

• The client paid for the purchase, but the cashier forgot to demagnetize the clip. In this case, at the exit the person will be greeted with an alarm signal. You'll have to go back to the cashier and present your receipt.
• The purchased items were paid for, the magnetic protection was removed, but the alarm sensor still went off. In this situation, a breakdown of the security system or incorrect actions of the sales employee who was engaged in unlocking the “lock” is possible.
• The customer walked outside the store with the anti-theft clip, but the detectors did not go off. An unexpected find is discovered already within the walls of their home and they puzzle over how to disconnect it from the product.

What it is?

The magnetic detector is a plastic clip. Inside it there is a durable metal rod and balls on a spring. The built-in springs of the magnetic-acoustic sensor operate at a frequency of 60 KHz. The rod passes through the fabric and connects two cone-shaped plastic balls. The spring in the design acts as a retainer.

Manufacturers of this type of protective devices equip the design with capsules with neon paint. If you do not carefully demagnetize the magnet on your clothes, you risk losing your new item on the very first day. If you forcefully open the tag by hand, the neon paint will flood the fabric.

At first it seems that the magazine sensor has nothing to do with the magnet. But that's not true. To attach or remove a magnet from clothing, you will need a powerful device. It is located at the store checkout and is responsible for both the clutch and the release of the clip. The magnet for removing anti-theft sensors opens the sensor where the rod is located.

Capsules with paint and springs tightly press the rod, thanks to which it is securely fixed and immobilized. When the removable device touches the clip, different polarities of the magnetic field arise.

At this moment, the pressure on the rod inside the protective mechanism decreases and the “lock” opens. Now you have learned about the principle of operation of an anti-theft clip and understand how to remove a magnet from clothes in a store.

Types of protection

Magnetic protections come in different types. It can be:

• simple magnetic stickers;
• plastic Alarm sensors;
• flexible protection.

Magnetic stickers and tags

The sticker device is extremely simple. This is the most cost-effective way to protect goods in a store. The sticker consists of:

• strips of metal;
• coils;
• capacitor.

It can be pasted in places that are invisible to the buyer, or it can be on a company label.

Plastic flat, round and other Alarm sensors

They have a more complex structure. The sensors are different in shape:

1. flat;
2. cylindrical;
3. rectangular;
4. round with a convex part.

The main difference is in the system of fastening the two parts together.

• For clothes, as a rule, magnets with a needle are used.
• Sensors with a cable are used for shoes and accessories; the same protection is used on premium goods.

Flexible system

For food or unusually shaped items, a flexible system is used. It is made in the form of a long flexible cable. Regardless of their shape, the sensors do not differ from each other in design.

The magnetic protection consists of two plastic parts:

1. In the part of the clip where there is a convex part, a needle or cable, several magnetic metal balls and a spring are mounted.
2. In the second part of the protection there is a hole for attaching a needle or cable.

If you insert the fastener into the second part, the balls will make room for attaching the nail. It will not be possible to pull the protection back: the balls will be sandwiched between the cone and the connection. In order for the balls to move and release the protection, a magnet is needed. The magnet will pull the balls to the opposite side, and the parts of the protection will separate from each other.

From the description of Alarm’s features, it becomes clear that there is no magnet as such in the structure of the sensor. A magnet is needed to create different polarities of the field. This will separate the parts of the sensors from each other.

There are also magnetic clips, one part of which contains a capsule of paint. If the protection is opened carelessly, the capsule inside will burst and stain the product with indelible paint.

To avoid damage to the product, it is better to remove such protection in the store. Otherwise, the product will be irretrievably damaged.

How to remove the clip?

Shopaholics who love buying things are better off getting a special device. It will also be useful for the “lucky” ones who, with enviable consistency, encounter a hated clip on their clothes. Magnetic devices for opening the lock are:

• stationary;
• portable.

The latter are significantly less expensive than the former, but they are much more convenient to use. Taking the device with you, you will forget about the question: “How to remove a magnet from clothes in a store?”

Universal removable mechanisms know how to open the clip and bypass the security system. They can handle both domestic and foreign detectors.

Powerful magnets for removing tags will justify the money spent on their purchase. They are sold by stores that specialize in anti-protective devices.

There are many models on the market. They are distinguished by:

• type of construction;
• size;
• magnetic gain level.

The table shows the features of a neodymium magnet:

Expert opinion

Soloviev Pavel Viktorovich

Designer with many years of experience and experience.

Whether or not to buy a magnet to remove protection from clothing is up to you. If there is no urgent need, then try to remove the annoying clip yourself. There are several ways to remove a magnet from clothing at home.

Sensors with magnetic lock

Basically, such devices for protecting goods from theft have a universal lock, but there are other types that are very rare.

Types of sensors with a universal lock:

1. Standard. To remove such protection, a magnetic force of 4000 Gauss is required. You can remove it using a large neodymium magnet.
2. Reinforced. Even the most powerful device will not help here. To remove it you will need a magnetic puller. The required force is on average 8000 Gs.
3. Super block. You need a puller for 9000–11500 gauss.
4. Hardlocks are considered the most powerful and reliable sensors. Currently, only two companies produce such protection: Dural Tag and Check Point. To remove them, a force of 14,500 to 18,000 Gs is required. Due to their properties, their price is noticeably higher compared to other companies.

We remove the clip without damaging the product

Anyone can remove a magnet from clothing at home. Remember: the detector worked or did not work when you left the store. If the signal does not sound, then the detected clip contains paint. This factor significantly complicates the situation.

To remove a magnet at home, choose one of the methods below.

If you suffer for a long time, something will work out

• You will need a thick, wide elastic band or several thin ones.
• Place the elastic between the top of the tag and the fabric.
• Turn the plastic without pulling it to your side so that the elastic is completely under the clip.
• After this, rotate both parts of the tag and gradually stretch them to the sides.

Blowing from the north

• After taking out the clothing, thread the elastic between the clip and the fabric.
• Rotate the top of the clip until the elastic rests against the rod.
• Tap the top of the clip with pliers.
• Having broken the plastic, open the mechanism and carefully remove the spring with balls and the rod.

Lighter VS Tag

• Surround the clip with a towel to avoid damaging your clothing.
• Use a lighter to melt the body of the anti-theft magnet.
• Remove its contents, starting with the springs, which will relieve pressure from the rod.

"Hook" from above

• This will require long-term freezing of clothes.
• Having taken out the item, apply maximum effort and strike the clip sharply.
• To remove the lock with one blow, place the clothing on the floor and hit the tag with a hammer.

Let's start during the cutting

• Take large metal wire cutters.
• Open the top of the clip and disassemble the mechanism.
• While doing this, hold the clip on both sides and proceed carefully.

Cut into pieces

This method requires a file. It is possible to get rid of a lock on clothes if there are no dye capsules in the clip. It is necessary to saw the rod, not the body of the tag.

• Press the fabric down onto the table to avoid damaging the material.
• Place the back of the knife between the plastic and the fabric.
• Try to move the parts of the clip apart to 3 mm.
• Use a nail file or manicure file to cut the shaft.
• Be careful, especially with thin fabrics.

Demagnetize

• You will need to buy a magnet to remove protection from clothing in the form of a cube, washer or disk.
• Bring it to the clip, the springs of which will relieve pressure from the rod and open the mechanism.

Knowing how to remove a magnet from clothes at home, you can easily get rid of the blocker. Removing the tag yourself will save you from having to return to the store.

In modern boutiques, special clips are attached to all products. They provide a guarantee that the goods will not be stolen. However, sometimes sellers simply forget to remove them. If you do not want to return to the store, then use one of the options given in the article.

Why do we need magnets for clothes?

If the buyer has not paid for the goods, then when leaving the store with it, the installed turnstile will begin to emit loud signals. The reason for this is a magnet on clothing, which can be unnoticeably attached. However, there are cases when the seller simply forgets to remove it and the access system does not identify the item.

It is quite difficult to get rid of a magnet at home if you do not know the solution methods. Before we look at options for removing magnets from clothing, it is strongly recommended that you check the product before leaving the boutique for foreign objects.

How to remove a magnetic clip using an elastic band or pliers?

Moreover, there is another method that you can use. Many people advise inserting a knife or screwdriver inside and rotating it from side to side in order to increase the gap between the two parts of the clip. As a result, they will simply come off, but there is a risk of staining.

Magnetic puller

Removal options:

• Many people note that they were able to remove the clip by rotating it. To do this, you need to pull the item together with one part of the clip with one hand, and pull the other one towards you, grabbing it with your fingers. At the same time, rotate from side to side and move in the opposite direction. Thus, as a result of rotation, the rod will slide over the balls that are inside. Sooner or later you will be able to free yourself from them. This will open the clip. This is one of the simplest options that does not require the use of magnets, screwdrivers or pliers.
• Of course, all these methods require special tools, as well as some skills. The fact is that not everyone has such tools in their arsenal, so the best option is to contact the seller to remove the clips. This option is suitable if you did not steal this item, but purchased it. In this case, you just need to return to the store with the receipt, show the seller that you purchased the product, and ask to remove the magnetic clip.
• The best option is to use powerful magnets. One of them is a hard drive magnet. It is quite powerful, works well and practically opens all the magnetic clasps that are used to tag clothes.
• There is another good option - using rubber bands. It is best to use rubber bands that are used to secure banknotes or pills in a store. She is also called Hungarian. To do this, try to insert an elastic band between the two parts of the clip. This will create a certain pressure, you can slightly separate the two parts of the clip so that a void forms inside. Next, you can insert your nails between the two clips and rotate them from side to side. After this, insert another elastic band. This way you will have several elastic bands between the clips, which will increase the space between them. Thus, by adding rubber bands, you can increase the distance between the parts of the magnetic lock and disconnect it.

Broken clip
There are many ways to get rid of a magnet on clothes. The best option is to contact the supermarket with a request to remove the clip from your clothing, providing a receipt for the purchase.

How do anti-theft sensors work?

There are several options for anti-theft systems in stores. They all have a different look and shape, but perform one function - block the theft of goods.

At the checkout, the seller removes the magnet with a special device. More often we see anti-theft guards in a round shape, which can be a hindrance when trying on hats or sunglasses.

However, there are also more practical options in the form of a flexible tag, so that the buyer can conveniently try on clothes or an accessory.

Types of protection sensors

There are several most common types of these devices:

1. Systems with an anti-theft electromagnet. In such a sensor, the emitter and receiver are fixed on different parts. As a result, a powerful electromagnetic field is formed, the frequency of which ranges from 10 Hz to 20 kHz. To deactivate such protection, the tag must be rubbed against a magnetic surface.
2. Acoustomagnetic systems. In such devices, the magnetostrictive strip is not fixed and can freely oscillate mechanically. When such a tag is placed in a special “anti-theft” frame installed at the exit, it will begin to create vibrations when leaving the store. Magnetic tag removers are used for deactivation.
3. Protection systems using radio frequencies. Such devices consist of an inductor, a capacitor and an oscillating circuit. It is to these that the protective frames installed at the exit react. A strong magnetic field of about 8.2 MHz is required for deactivation.
4. RFID tags. This is a special type of sensor. Such devices are used not only for protection, but also in transport travel cards and hotel key cards. You cannot deactivate an RFID tag; you can only change the information in it, which is what cashiers do after the sale.
5. Hard sensors. Such devices may have a magnetic or mechanical lock.

Types of magnetic tags

There are 3 types of tags common in Russia:

1. Tough. This is the option we most often see in stores. Hard tags are attached to the product and can only be removed using a special key. Some entrepreneurs use models that detect if the tag has been tampered with, that is, if you try to get rid of it, a signal will be given to the seller or security guard. For the convenience of buyers, a cable is attached to the magnet so that it does not interfere with fitting.
2. Flexible. The tag is a sticker with a barcode. Its essence lies in invisibility. It is usually attached to that part of the clothing that the buyer does not consider. This could be the inside of the sleeve or the elbow area. The disadvantage of such a magnet is that it cannot be hidden on all products, but if detected, it can be easily removed.
3. Tags with a special form of fastening. Such anti-theft systems are less common, but they are convenient for both sellers and buyers. The ability to change the shape or fastening allows you to install them on bottles, tools, small accessories and other things where a regular magnet is difficult to attach.

How to remove a magnet from clothes at home

All options for self-removal of the detector vary in complexity and practicality. If, when leaving the store, the turnstile did not work, then most likely there are capsules with paint in the magnet, which will complicate the removal procedure. Let's consider methods for solving the problem.

Thin hair elastic

The elastic band should be thin. We thread it between the top of the detector and the clothing so that it is tightly tied around the mount. Then we take the magnet from both sides and begin to scroll, pulling in different directions. During the process of removing the detector, the elastic band will protect your clothing from tearing.

Rubber band and regular pliers

This method is relevant for devices with paint. We wrap a rubber band around the metal rod located between the magnet and the clothing. Then, using pliers, carefully break off the convex part. We pull out the capsules with paint from there, and turn both parts of the magnet with our hands.

Tongs and lighter or candle

If the magnet has a recess in the upper part, this means that it contains paint capsules. They will stain your clothes if you try to remove them by force.

Use a lighter or candle to melt the notch. As soon as it becomes soft, tear it off and, using tongs, carefully remove the capsules with the spring.

As soon as you pull it out, the magnet will delaminate itself.

Hammer

Pack the clothing with the detector in a plastic bag and place it in the freezer. After 2-3 hours, take it out and hit the top of the magnet with a hammer. The method is complex and ineffective, since you need to use enough force, and there is a risk of damaging the goods. It also cannot be used on capsule tags.

Wire cutters

We tear off the convex part using wire cutters. This must be done carefully so as not to damage the capsules. After the inside of the detector has opened, we take out the contents, including the spring. We disconnect the magnet, moving both parts apart.

This method prevents the opening of sensors with capsules. We place most of the magnet end-to-end, then attach the knife to the middle along the form and press with all our might. After a cutout appears on the tag, we saw the structure along it. To avoid damaging your clothing, cover it with a cloth. Instead of a knife, you can also use a nail file or hacksaw.

Using a magnet

In specialized stores you can purchase a neodymium magnet with a powerful field. A square or rectangular object works more effectively. The more powerful it is, the easier it is to remove the detector from clothing.

Hit the floor

The use of this method is only relevant for tags without ink capsules. We take the clothing by the edge farthest from the detector and hit it on the hard floor. You need to hit so that the top of the tag gets hit. Once you hit the right spot, the magnet will disintegrate.

How to remove a magnet from clothes with an intercom

The intercom has a powerful magnet, which will serve us to remove the tag. Place the inside of the detector against the intercom and hold it tightly with your hand. Pull the upper part towards you and the magnet will disintegrate. A similar process occurs in stores, only with the use of a special tool.

What should you not do?

When removing a magnet at home, you need to follow safety precautions, as you can not only damage the product, but also injure yourself. In particular, this applies to the use of a screwdriver, knife, wire cutters and hammer.

To avoid damaging the detector itself, use only a special tool or buy a neodymium magnet. Alternatively, use the intercom method.

All other options involve damage to the item. Also, do not forget that some devices will contain paint capsules that must be removed very carefully, otherwise you will stain yourself and the product.

Use the option of burning plastic only outdoors or in a ventilated area.

Expert opinion

Soloviev Pavel Viktorovich

Designer with many years of experience and experience.

It is impossible to remove a magnet without the use of special equipment, however, the above methods will help you get rid of anti-theft devices using available means available in every home.

Almost every store puts an anti-theft magnet on every item, which prevents the item from being taken out without paying. Sometimes it happens that the cashier, in a hurry, forgets to remove this magnet.

Or several magnets are attached to an item at once, and one of them is forgotten to be removed. Having only learned about this at home, people are wondering what to do next.

After reading this article, you will learn how to remove an anti-theft magnet from clothing or items.

1. Actions to take when detecting a magnet on clothing
2. Details
3. How to remove a magnet from an item after purchase
4. Removing a magnet from clothing without damaging it
5. How to remove a magnet from clothing using a lighter or screwdriver

Safety precautions when removing at home

When removing the magnetic sensor yourself, it is worth remembering the following precautions:

1. The sensors must be removed with extreme caution so as not to damage the product.
2. You should not try to tear off the protection.
3. Capsules with dye can ruin the item forever.
4. You can only set fire to the protection in a well-ventilated area or outdoors.

Despite the various ways to remove a clip at home, it is better to use a magnet installed in a store. This way the product will definitely remain safe and sound. Removing magnetic protection at home should be done with extreme caution. And in the future, it is better to once again ask the seller to check whether all the protective clips have been removed.

Actions to take when detecting a magnet on clothing

It is better not to throw away the receipt immediately after purchasing the clothes, as you may still need it. If you find a magnet, it is best to return to the store, remembering to take your receipt with you, and ask the cashier to remove the anti-theft magnets for clothing. The seller must make sure that the item was purchased and quickly remove the magnet with a special device.

If you don’t have the receipt or you can’t get to the store in the near future, there’s no need to be upset - you can remove the tag yourself.

REFERENCE! Before removing the store magnet, you need to figure out what type of tag is on a particular item.

Small and inexpensive items usually have tags in the form of stickers that can be peeled off without much effort; they are not even removed in stores.

There may also be a radio tag on the item; it is usually small and can also be easily removed at home. After this, the purchased item will not be damaged in any way.

But if a magnetic-acoustic device is installed on a newly purchased piece of clothing, then difficulties may arise with removal. The magnets are much larger and stronger; you will need foreign objects to remove them.

You need to be careful with such clips, as there may be a capsule with paint that will ruin your clothes.

What to do if the protection has not been removed, how to demagnetize it in a simple way?

It is optimal to return to the store with a receipt for the goods and ask the seller to remove the clip.
To do this, you will need a receipt as confirmation that the item was not stolen. The seller will remove the magazine magnet and will continue to be attentive to checking the safety sensors. But what if returning to the shopping center is not possible? If the store where the purchase was made is not nearby, you can try to contact any other store with the receipt. Practice shows that sellers are willing to accommodate and remove protection. In case of failure, the magnet will have to be removed at home.

Having a receipt will protect the buyer from unnecessary questions from the seller.

Details

How to remove a magnet from an item after purchase

If you can’t get to the store, you need to try the following:

1. Remove the magnetic tag from the item using a knife and a strong magnetic device. The knife must be inserted under the upper clip, and a magnetic device must be placed on top. Although such a device is very strong, the tag will be removed very quickly in this way. In this case, the upper part can easily be demagnetized, and the lower part can be removed without difficulty.
2. You can remove a magnet from clothes yourself using frost. You need to put the purchased item in the freezer for an hour. When the magnet freezes, you need to pull the elastic band under the top clip. Now you need to turn the clip in different directions until the elastic rests completely. Now you can easily split the magnet with a hammer or other object.
3. Using a wire cutter, you can disassemble the top clip and remove all the insides. This method is quite difficult and requires care and caution. It is easier to do this with someone together, one should disassemble the clip, and the other should hold the clips so that they cannot connect again.
4. You may need a file to remove the magnet from clothing. You need to cut the tag rod into 2 parts. This method is quite dangerous because some tags contain paint that is quite difficult to wash off.

REFERENCE! The described methods work quite well, but are not very safe for the item itself, since the fabric can be accidentally wiped or cut in this way. Such magnets are attached quite tightly, so the girl may not succeed.

Removing a magnet from clothing without damaging it

There are several more options for this:

1. The best way to remove a magnet is to buy a magnet to remove clips from things. A magnet for removing anti-theft clips can be bought in an online store for about two thousand rubles. In this case, you need to be careful, because not all types of tags are demagnetized with one device.
2. If you cannot go to the store where you bought the item, you can go to any nearest one and ask to remove the magnet there, because everywhere there are such removal devices. The store employee has the right to refuse you. If someone you know works in a clothing store, you can ask him to remove your tag.

REFERENCE! If this is possible in their store, then your friend will easily do it.

1. There is an option to demagnetize the tag using a door intercom. Often the keys on intercoms are quite powerful and can cope with the problem. One side of the clip must be brought to the key on the intercom. The tag will be removed if it is quite strong.
2. The protection can be removed using rubber bands. You need to push the elastic under the top clip until it stops. After this, you need to turn the clips in different directions. This will take quite a lot of effort and time, but the clips will move away from each other and they can be removed.

How to remove a magnet from clothing using a lighter or screwdriver

1. You can melt the clip with a lighter. After this, it will be possible to remove the spring from inside the magnet. Now the lighter is no longer needed. You need to disassemble the magnet, first remove the spring that creates pressure, then remove the paint container, if any. Now you can pick up the magnet with any narrow object and pull it out, you can also do this with a screwdriver.
2. For this method, you also need a screwdriver; you need to pry the magnet from below, and then press hard on the handle and try to lift the magnet up. The other side of the tag should be held from below. Here it takes a lot of effort to lift one side of the magnet. You need to do this sharply and quickly.

REFERENCE! If there is protection on the shoes, I remove them using the same methods. The easiest way is to use a magnet, in which case the purchase will definitely remain intact.

Expert opinion

Soloviev Pavel Viktorovich

Designer with many years of experience and experience.

You can remove the clips yourself, but this requires care, effort and patience. If you do something wrong, the clothes will be ruined. In this case, only resentment for the money spent will remain.

We are ready to help you with any questions!

• What is a magnetic tag?
• Types of tags
• First group
• Second group
• Third group
• Fourth group
• How does a magnetic plastic tag work?
• What does an RF tag look like?
• How to remove a tag in a store?
• How to remove anti-theft at home without special tools?
• Method No. 1
• Method No. 2
• Method No. 3
• Method No. 4
• Method No. 5
• Method No. 6
• Method No. 7

Today it is impossible to imagine a boutique that does not have a cash register, a terminal for cashless payments and video surveillance. Also, any store that respects the value of its goods uses a number of methods to protect it from theft and damage.

But a more popular, practical and convenient means is a magnetic tag, more precisely, a plastic-magnetic one. In this article you will learn about how to remove a magnetic tag from clothes at home, how it works, about its varieties, and who can help you remove a magnet from clothes in a store.

What is a magnetic tag?

Surely, during any fitting of clothes, you paid attention to the large black or white clip. This is a magnetic tag.

In addition to the name we are familiar with, it also has several implications: just a magnet, a tag, a beeper, since it gives a signal. Also, a magnetic tag is often called an alarm (from English.

- alarm), adjacent to the military signal. Popularly this is an anti-theft sensor and “anti-theft”.

Hence its purpose - it is attached to an item in order to prevent theft and damage to clothing in a store.

How to properly place the sensor on clothing

The anti-theft system should not interfere with customer service. Striking a balance between the use of anti-theft sensors and quality customer service is important. The speed and efficiency of the trading process depends on this.

The first step is to properly place security tags on your clothing. Sensors should not be located where they would prevent the customer from comfortably trying on the product. A large device such as a convex or grooved “shell” should be placed outside. The flat and smooth side is on the reverse side. When the buyer puts on a piece of clothing, he will be able to easily put his hand through the sleeve without catching the device.

Another aspect to consider is the placement of the sensors in relation to the seams. If the device is attached to the seam of a shirt, the thief will cut it and remove the device. Repairing a small hole in this area is easy. Placing the sensor a few centimeters to the left or right of the seam does not pose a problem, but increases safety.

There is no need to use the same size sensor on a T-shirt as on a winter coat. It is bulky and conspicuous to the buyer. It is better to use smaller, discreet anti-theft devices. A large device is suitable for outerwear. In this case, the obviousness of the fact that the goods are protected is appropriate.

Managers of clothing stores are recommended to introduce a system of internal rules that specify where the protective sensor is placed in the product. For example, on the lower left pant leg, the right sleeve of a coat, and so on. This will make it easier for cashiers to navigate when serving the customer. If the seller has to search the entire perimeter of the garment for the sensor, his productivity will be low. It’s even worse if the cashier misses the device and causes inconvenience to the buyer in the form of subsequent proceedings.

Types of tags

Despite the large number of names and variants of beepers, but paying attention to the principle of operation, they can be divided into several groups.

First group

This includes small devices that are triggered by radar gates that are located at the exit door. In appearance, these are plates that are tuned to the frequency of the touch antenna (8 MHz). And their name is radio tags.

Second group

These are small plastic stickers that work even when cut. Such stickers are attached to small-sized products.

Third group

These include magnetic-acoustic anti-theft sensors. They are a plastic clip with a sharp metal rod. The peculiarity of these tags is that with physical pressure, both sides can close even more tightly. They also have a built-in capsule with neon dye, which can ruin the clothes if stolen.

Fourth group

This includes all electromagnetic sensors.

Radio frequency and acoustomagnetic sensors are most popular and used in the trade sector. They are practical, reliable and provide good protection against theft.

Now we can reveal the secret of why a magnetic tag, as it is often called, is not actually one. Information about how the beeper mechanism itself works will help us find out about this. Let's consider the internal contents of the used tag.

What does an RF tag look like?

In addition to the device of the tag, you can talk about the so-called “bottle sensor”. Among RF beepers, it is widely used in retail industry.

Its demand is explained by its adequate cost, ease of use, and it can be purchased without problems. The bottle tag is distinguished by its stylish appearance: two clips, one of which has a bulge that resembles a bottle.

In addition, it has a different type of fastening - an adjustable cable that connects the sensor and the product.

Having understood the types and operation of tag mechanisms, you can move on to the part of the article that talks about how to remove a magnet from clothes in a store and at home yourself.