We may not know about it from the first moment, but if you notice that the Xiaomi Mi Band causes skin irritation , itching or damaged in one way or another, the truth is that we must take into account one series of aspects. Although they are designed to be used both day and night without removing them at any time, the sensitivity of everyone's skin can lead to these problems that we just mentioned.
While in most cases the main cause of this irritation is chemical or caused by our sweat, the truth is that there are other factors to consider, such as cleaning or even the material of the activity tracker strap we are wearing. currently using. And the fact is that as much as we have fallen in love with the smart bracelet, our health and safety are much more important. Therefore, we will provide you with a series of services that you will find useful so that you can continue to use it.
Cleaning a silicone strap from an apple watch in 5 steps
Step 1. First, wet a clean melamine sponge in cold running water.
Step 2. After this, squeeze out all the excess liquid from it as carefully as possible, so as not to tear it.
The most incredible way to get my hair back!
This is just a DISASTER ! And after all, my hair did not start falling out in one day, but systematically - day after day I watched how the hair left my head: while combing, washing, even while sleeping. (read more…)
Step 3: Be sure to remove the silicone band from your Apple Watch to clean it.
Step 4. With a little effort, remove all dirt from the silicone strap with swiping movements - do not rub it over the surface, but rather wipe it off.
Step 5. Rinse the silicone strap in cold running water and wipe dry with dry wipes or a towel.
Melamine sponges easily absorb dirt, which is very difficult to wash out. It is better to use a new one than to rub the dirt over the surface with the old one.
Do you like guys with long hair?
Not really
These jaws are very flimsy and you can easily tear them on the metal strap buckle. Yes, they cost pennies, but it’s better to be careful.
How to boil white fabrics correctly?
Digestion or boiling in modern conditions is not as popular as it was before, but the method is still effective and is worth taking note of.
To boil at home you need:
Advice! When boiling, you should close the container with a lid, this minimizes the risk of boiling water splashing to the sides.
Faux leather
Preventive measures
Cleaning
Faux leather straps are wiped with a soft sponge or cotton swab soaked in a warm solution of detergent for synthetic fabrics, trying to avoid excessive wetting of both sides of the strap and its internal contents. Residues of detergent and excess moisture are removed first with a slightly dampened and then dry soft cotton cloth. Dry the straps in a straightened state at room temperature.
Naturally, it is useless to soften and treat artificial leather with oils; in this case, it is better to wipe it with silicone glitter to make it look a little “fresher.”
Leather strap care
Leather straps will last you much longer if you follow these simple rules:
- Do not tighten the strap on your wrist too much - leave a small gap about the thickness of your little finger. If the product is tightened tightly, then with constant contact with the skin it will begin to intensively absorb sweat. This will also prevent stretching and deformation of the skin. Finally, when fastening, you won't have to bend the leather strap too much to secure the clasp on one of the last holes.
- Do not wear your watch on a leather strap all the time. Try to take off your watch while you sleep - this will allow the strap to maintain its shape and ventilate the smell of sweat.
- Avoid interaction of the leather strap with aggressive substances and chemicals. Washing dishes, finishing work using paint and varnish products - in these cases you should definitely remove your watch.
- Avoid exposure to moisture. All professional diving watches are produced with silicone and similar straps for a reason. Moisture has a detrimental effect on natural leather. Swimming in a pond, taking a bath or visiting a sauna while wearing a wristwatch is not the best solution, even with a declared water resistance of 100 m.
As for moisturizing and polishing an artificial leather strap, these are completely useless activities, and most often dangerous for the material.
You may simply damage the top layer of the product, and then there will be no way to return it to its original appearance.
If you have a leather Apple Watch band
The Apple Watch Sport Band is made from fluoroelastomer, which is particularly durable and sweat-resistant. Feel free to clean your Apple Watch fluoroelastomer band with warm water and mild soap to remove stubborn stains.
Expert opinion
Ksenia Diyanova, expert on beauty, purity, harmony
Ask me any questions, I will be happy to answer!
The soap is washed off with a damp cloth, then wiped with a cotton napkin or cloth and left until completely dry. In order for a textile strap to last as long as possible, it is enough to follow the same recommendations that we described earlier for leather straps. Faux leather Ask me all your questions, I will be happy to answer!
Apple watch silicone strap: how and how to clean it better
- Soda and water solution for skin;
- A solution of water, liquid soap and ammonia for leather and silicone;
- Protein and milk solution for white and fair skin;
- Polish with powder, baby powder or crushed gold chalk;
- Soda and vinegar solution for silver and steel;
- Dishwashing detergents for fabrics;
- Toothpaste or laundry soap solution for plastic and rubber.
The plastic and rubber strap can be washed with laundry soap. Grate half a piece on a coarse grater and pour a glass of warm water. Stir and wait until the mixture forms a porridge.
How to clean wristwatches at home: effective methods and remedies
- Pour water (1:1.5) into the tooth powder, mix thoroughly and apply to the surface. They begin to wipe off the slurry with damp foam rubber, without waiting for it to harden. Wash and blot with a dry cloth.
- The cotton wool is moistened with nail polish remover (the composition does not include acetone). Wipe the pad with light circular movements, then wash it. If contamination remains, the operation is repeated.
- The moistened case is sprinkled with citric acid, lightly rubbed with a soft brush and washed off.
Make a bath with soap shavings or liquid soap. The gadget pad is immersed in foam for 25 - 35 minutes. Then the flannel is rubbed gently on both sides. The soap is washed off.
ONYX BOOX Kon-Tiki 2 e-book review
One of the most technically advanced Onyx Boox models of 2022: high-resolution touch screen, Android 10, powerful processor, 3 GB of RAM - everything you need for comfortable work...
Yes, starting from the very first generation, it was possible to buy a replacement strap that had a different design, and thereby protect yourself from loss, for example, by using a metal strap with a reliable capsule fastening.
However, this option was not suitable for everyone, since there are many people who are more than completely satisfied with the standard strap, both in materials and appearance.
But given the actual irrelevance of previous generations, the problem of the capsule falling out of the strap has exhausted itself. But the loss of the bracelet itself is not, since another reason for the loss was the strap itself, or rather, the clip, which, due to its design, tends to come unfastened with sudden movements of the hand, getting caught on clothing or an object in the environment.
There are several answers here, and the most obvious one was always literally under the nose of the owner, but this same owner rarely paid attention to it.
Remember how the bracelet charger is placed in the box? It is laid out very simply - rolled up and secured with a black elastic band. And... this rubber band will help us. Instead of throwing it away, we take it and put it on one side of the strap of our bracelet. If you have the fourth generation, then it does not have such an elastic band, but finding something similar will not be difficult, since such elastic bands are a dime a dozen. For example and for greater contrast, I took a white elastic band from a phone charger cord.
We fasten the bracelet, and then move the elastic band so that it becomes a kind of trench coat that will hold the device on your hand, even if the strap comes unfastened.
How I found my ideal hair growth product
Hello dear! I want to share with you my solution to the sensitive problem of hair loss . The problems are very serious, at least for me. I would never have thought that this misfortune would touch me, especially at the age of 29 (read more...)
If we take into account that most bracelets have a strap of exactly the same color as the elastic band - black, such an improvement will not look something alien and will not be noticeable. Just? Not that word! Cheap? For free.
In this way, literally in two minutes of time and zero rubles of investment, we protected ourselves from losing our favorite device.
Not everyone likes black straps. Someone initially buys a bracelet with a strap of a different color, and someone then buys dozens of different straps. Therefore, not everyone will like a black bezel, for example, on a green strap.
In this case, there is also a way to reduce the likelihood of losing the bracelet due to an unfastened strap. And although this method has its own nuances, it allows you to worry much less about the safety of the gadget.
Sequence of work
Cleaning a watch is not limited to cleaning the mechanism itself; the watch body, including the glass and the strap or bracelet, also needs it.
Although it is usually recommended to start cleaning the mechanism immediately, it is advisable to clean the case with glass first, since after cleaning the mechanism itself, it will need to be placed in the case as quickly as possible to prevent dust particles from entering it . You can, of course, cover it with paper or cloth, but even from them particles that are almost invisible to the eye can get into the mechanism, which will negate all your work.
So, cleaning a mechanical watch is carried out in the following sequence .
Disassembling the watch
- Remove the winding screw that secures the mechanism into the case.
- Open the case and carefully remove the mechanism from it.
- If there are large, clearly visible contaminants that are easily accessible, they can be removed with a toothpick. But be careful : if its tip breaks off and remains inside, it will damage the mechanism, and then you definitely won’t be able to do it without a watchmaker.
- Using a rubber blower, clean the mechanism with compressed air. Make sure that the pressure is not too strong, otherwise the miniature parts may be damaged.
- Clean the housing in the same way - the pressure may be stronger here.
Cleaning the case
- Use a cotton pad or swab soaked in gasoline/alcohol to wipe the watch case.
- If there are stubborn stains , they can be easily removed with a brush or toothbrush.
- To clean the dial, use first a damp and then a dry cloth.
- Do not wipe the glass with gasoline/alcohol, as this may impair its transparency (this applies to inexpensive watches with low-quality glass).
- Finally, wipe the body cloth .
Cleaning the mechanism
Remember that you need to clean the mechanism of a wristwatch very carefully, avoiding strong pressure on the parts, otherwise they may become deformed - this is an indispensable condition for home cleaning. Ideally, it is advisable to find instructions for this particular watch model, since if assembled incorrectly, they will simply become unusable.
- You need to start with a balance : it is immersed in alcohol or gasoline, poured into a cup or glass to a height of about 2 cm. Take the balance with tweezers by the rim, immerse it in the cup and rinse, then move it through the air to allow the gasoline/alcohol to evaporate, and place it into birch sawdust for final drying - they absorb liquid better than others.
- The anchor fork and anchorage are cleaned in the same way, but dried on paper, since these parts are smaller.
- All other parts are cleaned in the same way . Large ones are placed in sawdust for drying, and small ones are placed on paper.
- Let all parts dry . If after this you notice plaque on them, carefully clean it off with a brush or toothbrush.
- The mechanism must be assembled after have completely dried and done as quickly as possible to prevent dust from getting into it.
- Upon completion of assembly, lubricate the parts with watch oil (this is convenient to do with a pipette) and immediately insert into the case.
Useful video
Different fitness trackers may have different capsule attachment systems, depending on the manufacturer or material. In models with a removable case, you can change the straps at will or remove the bracelet only for charging. Rules for cleaning different bracelets:
- rubber options can be washed in soapy water or use special sponges;
- silicone bracelets can be easily cleaned with window cleaner (or another alcohol-based product);
- For leather straps, a special shoe cleaner that does not require rinsing is better;
- Metal bracelets can be washed under water, cleaned with ammonia or vinegar, depending on the alloy.
With proper and regular care, the sports tracker strap will always look clean and neat, regardless of its age. If the stains are not washed off using the methods listed above, you should think about buying a new strap.
How to remove
The step-by-step instructions that you should follow when removing the strap from the fitness bracelet depend on the model of the gadget. This is due to the fact that each manufacturer uses its own fastening system. Fixation based on:
- latches;
- tension;
- springs.
With Xiaomi
You need to get the capsule with the sensors of the Mi Band bracelet of any version according to the following scheme:
- turn the gadget upside down;
- Pull the edge of the strap with your right hand;
- press the edge of the body with your left hand.
Ritmix RFB-400
To detach the strap securing the Ritmix RFB-400, you need to:
- unfasten the lock located on the side of the gadget body;
- release the capsule by pulling it to the side, the trajectory of movement should be parallel to the edges of the latch.
This type of fastening is the most sensitive. It is recommended to remove the capsule with sensors as little as possible, otherwise the lock will quickly weaken.
Huawei Honor A2 Smart band
This gadget has a very different mounting design from others. To remove the monitor from the strap, just press on the back of the case.
Garmin Vivoactive
The Garmin Vivoactive capsule can only be removed using the set of screwdrivers included with the gadget.