How to Clean the Brusco Minican Electronic Cigarette Cartridge • Blowing and washing

Like any device, an electronic cigarette requires regular cleaning. Most users will confirm this. They know firsthand that careful handling of the vape guarantees excellent taste and long-term operation of the device. The need to care for an electronic cigarette is explained by the peculiarities of its operation.

• First, the evaporator needs to be replaced periodically. In maintenance-free models, it is enough to unscrew the replacement evaporator and screw a new one in its place. In serviced models, you will need to replace the wick quite often, and less often the coils. A change in steam quality for the worse will help determine the need to replace the evaporator: for example, a feeling of dryness or a burning taste.
• Secondly, greasy hand stains, liquid stains and other contaminants appear on the battery part of the electronic cigarette, which should be removed from time to time by wiping.
• Thirdly, liquid residues, soot and other “deposits” of the vaping process accumulate on the walls of the tank or drip. It is recommended to regularly clean the e-cigarette atomizer.

The most incredible way to get my hair back!

This is just a DISASTER ! And after all, my hair did not start falling out in one day, but systematically - day after day I watched how the hair left my head: while combing, washing, even while sleeping. (read more…)

How to clean an Ego, Ijust, Kangertech Evod electronic cigarette with a clearomizer, vaporizer cleaning methods

How to clean an electronic cigarette, which parts need to be treated? Parts of the device such as the atomizer, cartridge and power supply should be cleaned. This process is not particularly difficult; it is important to follow certain rules and sequence of actions.

Expert opinion

Ekaterina Korneva, expert in the field of care, cleanliness and beauty

I will help you understand all the intricacies.

However, there are a number of signs by which it can be determined that cigarette parts need processing. For many people, most of their money is spent not on buying liquid, but on replacing a coil covered in soot. How and with what to clean electronic cigarettes If you have any questions, please contact me, I will be happy to answer!

How do you know when it's time to clean?

The device must always be kept clean. The formation of contaminants leads to irreversible deterioration of the atomizer’s performance, which can lead to breakdowns. It should be cleaned as often as possible, especially if you encounter at least one of these signs of clogging:

• the vapor volume decreased very sharply and sensitively;
• the supply of steam to the evaporator has stopped or is intermittent;
• you spend more effort to vape through the atomizer;
• the appearance of other odors or tastes, as well as if a burning taste appears.

Justfog Minifit, question and answer

How to use Minifit correctly?

Don't laugh, not all users understand how Minifit works. Due to the lack of at least some kind of interface, many aspects of Justfog Minifit’s operation do not seem obvious, so we will deal with them. Go!

How does Minifit turn on and off?

Both the regular Minifit and the Minifit Max are launched by pressing the button four times, and the Minifits are turned off in the same way. They don’t always have to be turned off after use if the Podik sits on your desk all day. But if you constantly carry the Minifit in your pocket or bag, turning it off will serve as a lock against accidental pressing.

How to properly charge Minifit?

Any micro-USB cable will do; the charging connector is located on the bottom edge of the Minifit. The LEDs on the button will flash while charging. It’s easy to find out that the Minifit is charged: the blinking will stop and three dots will just light up.

How long does it take to charge the Minifit?

The younger version of Minifit has a battery capacity of 370 mAh; it takes about 40 minutes on the wire to fully charge, which is fast. The Minifit Max has a battery almost twice as large, 650 mAh, so it takes longer to charge, in about an hour. You can vape while charging, but the manufacturer does not recommend doing this, so it is better to wait or disconnect the Minifit from the power supply for a while.

How to understand that the Minifit is discharged?

The device will not allow you to take a puff; instead, Justfog Minifit will blink 6 times and turn off - put it on charge and don’t forget to turn it on later. The current battery charge can be tracked by the LEDs on the button: we poke it and see how many dots are lit. The more lights, the more charge left. Even when the battery charge is low, Minifits give a slight drop in power; if you feel that there is less steam, connect to a power outlet.

Methods for cleaning the evaporator

The easiest way to clean out excess oil is to remove the contents of the cartridge and try to steam it with an empty cartridge. Excess liquid will evaporate quickly enough.

Washing and purging

The steam evaporator is disconnected from the power source and blown through the mouthpiece to remove any remaining liquid. We carry out the same action on

with the mouthpiece itself, and then rinse everything with water under pressure. Repeat the procedure one more time and dry. Only after eliminating all moisture can the device be assembled for further use. If flushing does not help, contact an expert.

Bath

A simple and very effective method that takes minimal time. It is necessary to disassemble the entire device into its components. After which, the atomizer is immersed in hot water for one hour, then it is purged and all liquid is removed. We carry out the procedure one more time. The element is re-immersed in water for a couple of hours, and then purged. The atomizer is dried in a vertical position for 24 hours.

Treatment with chemicals

If the problem is the accumulation of carbon deposits on the coil, then washing with water will not help. Here, treating parts with alcohol will be effective. The product is disassembled into its components. Now we rinse and clean the steam generator for 10 minutes in a weak alcohol solution, if necessary, making the concentration of the solution stronger. You can also use a vinegar solution (a glass of water + 1 tablespoon of vinegar 9%). We remove plaque with a cotton swab or cloth. After this, the components are washed in water, blown, dried, and then collected.

How to clean an electronic cigarette atomizer using ultrasonic baths?

The most effective way to clean an atomizer is in an ultrasonic bath. This inexpensive and useful device is used to remove dirt from manicure tools and personal care items.

The procedure is as follows:

• fill the container with detergent;
• disassemble the ES and place its components in a special compartment;
• select the desired mode and turn on the device;
• after the end of the cycle, remove the container and rinse its contents with clean water;
• dry the parts at room temperature or with heated air;
• assemble the product.

What should you avoid?

1. when you fill the cartridge with liquid, you must ensure that it does not get on the connecting part;
2. exclude empty inclusions without puffs, so that there is no release of moisture flowing from the evaporator;
3. charging is carried out with a special charger and in a fire-resistant case, preferably under supervision;
4. use power supplies correctly so that they do not fail and an explosion does not occur. If the battery is of poor quality or damaged, the insulating wall breaks under pressure, the resulting gases escape and ignite.

Other options for unscrewing the tank

Thanks to special substances, it is possible to disconnect the atomizer from the base or the tank from the evaporator. In the process of active vaping, so-called gars are formed inside. Because of them, the components of the liquid boil, which settle tightly on the thread and do not solidify.

WD-40 is a substance that is sold at hardware stores. This composition must be dripped onto the thread through the air duct or hole for vaping the puff. Then you need to wait 5-10 minutes for the plaque to dissolve. Then rinse the vape to remove any remaining WD-40. The mobility of parts is guaranteed to increase.

It is impossible to repair cracked glass. In addition, with constant unscrewing/twisting, the crack only increases in volume. To avoid the cost of purchasing a new electronic device, it is more rational to clean your device after every 2-3 refills.

How to extend service life?

To increase the service life of your electronic cigarette and consumables, you should follow some recommendations.

• Do not drop the device or expose it to mechanical damage.
• Prolonged exposure to direct sunlight, as well as storage near sources of high temperature, is contraindicated.
• Handle the battery very carefully. Please read the instructions carefully before charging the battery. Do not store the battery with metal objects; they may accidentally short-circuit the battery contacts, thereby damaging it.
• If you are not going to use the vaporizer for a long time, remove the battery from the cigarette.
• The most important thing is that you should never attempt to repair it yourself, with your own hands!

Source

Removing carbon deposits

To get rid of carbon deposits, you need to clean the incandescent coil. When removing soot yourself, proceed as follows:

• cool the vape;
• disassemble the atomizer;
• take out the spiral;
• place it in an alcohol solution that will dissolve carbon deposits;
• clean the ventilation ducts and other contaminated parts;
• put the device back together.

If the electronic cigarette still tastes bitter, then the steam generator should be rinsed with running water from the tap for 30 seconds. Then it must be dried and connected to the battery (not only the atom, but the entire device must be switched). Next, blow through the evaporator 6 times while pressing the button. After that, the wick is inserted, the cigarette is assembled, and the liquid is poured in.

Cleaning procedure

Firstly, the atomizer must cool down after use. Place it in a glass of very hot water and soak there for 15 minutes. We blow out excess water through the end that connects to the battery, and repeat the procedure one more time, after changing and heating the water. The main thing is that after rinsing there is as little water left as possible, so you can shake the atomizer properly.

Next, let it dry overnight or speed up the process with a hairdryer. After drying, connect it to the battery without inserting the cartridge or adding liquid.

Hold the button on the battery for 4 seconds. The spiral should begin to glow from the inside, and a hissing sound should be heard - this is the melting and evaporation of various deposits on it. Disconnect the battery and cool it. We repeat this procedure until the coil is clean (it starts to heat up very quickly).

Let the atomizer cool down. Then we drop four drops of e-liquid directly onto the bridge - slowly. Each drop should be well absorbed and only after that we drop the next one.

Attach the refilled cartridge and carefully pull it out. As soon as there is good steam, disconnect the cartridge. The atomizer is very dry after cleaning and will absorb liquid very quickly at first. If a burnt taste appears very quickly, you need to add a couple of drops of cigarette liquid directly to the bridge.

Step-by-step instruction

After the device has completely cooled down, it is necessary to disassemble the electronic cigarette into its component parts. First of all, the atomizer is disconnected to eliminate any remaining liquid in it. The evaporator should then be rinsed in warm water for 20 minutes. After these simple steps, the device is blown out and left to dry for two hours.

If the device is very dirty, it is better to first soak it in cleaning liquid. The following products are suitable as a special liquid: vodka, Coca-Cola, vinegar or citric acid.

Plaque can be removed effectively if you soak the e-cigar first. After this procedure, the soot can be removed with a regular cotton swab. It is recommended to rinse the electronic cigarette under running water immediately after soaking.

Experts do not recommend cleaning e-cigarettes using “Fairy” type detergents. The substances used in Fairy eventually settle on the internal parts of the device. There will be an unpleasant aftertaste when vaping. In addition, the electronic device will quickly deteriorate.

How to properly care for your clearomizer? Typically, e-cigs with a clearomizer look very modern, since the evaporator is combined with a cartridge and placed in a case made of transparent material. Also, e-cigarettes are divided into prefabricated and solid. If we talk about solid models, they cannot be washed or repaired. Therefore, maintenance of the clearomizer is impossible. As for prefabricated devices, it is much easier with them, since in the event of a breakdown, any part can be replaced. It is also possible to wash all parts and get rid of carbon deposits. The only disadvantage of such devices is persistent aromas that cannot be cleaned. The plastic of the case absorbs strong odors.

First you need to let the vape cool, and then completely disassemble it. Each part must be rinsed in warm water for at least 10 minutes. And only after this the disassembled device must be soaked in alcohol for two hours. Next, you need to rinse all the parts and dry them with a hairdryer. Only after drying can you assemble the electronic cigarette and enjoy the pleasant aroma.

Vapers should not forget that the innovative device must be serviced regularly. Washing, disassembling and drying parts should not be scary, as there is nothing complicated about it. If you follow the instructions, the e-cigarette will last for many years, which will please its owner!

Previous Electronic cigarettes How to properly inhale an e-cigarette vaporizer? Next HealthHow to quit smoking e-cigarette

What to avoid

1. No need to use chemicals or solvents. It is impossible to get rid of the taste of a particular liquid you don’t like. Some of the liquid will still remain in the washcloth. The same goes for solvents.
2. There is no need to overheat the atomizer during a dry run. If you overheat, the plastic ring inside the device may melt, as a result, the plastic may get on the coil, or greatly impede traction
3. There is no need to do a dry run before soaking the atomizer in hot water. This may help improve performance for a short time, but it will deteriorate faster.
4. There is no need to perform a dry run with a voltage higher than the working voltage for a given cigarette. Higher voltage may damage the coil
5. There is no need to rinse the atomizer with running water. This may damage the internal parts of the device. Just soak in hot water.

Typically, e-liquids are based on polyethylene glycol (PEG), propylene glycol (PG) and vegetable glycerin (VG). All three of these substances are dehumidifiers.

The main reason why people mod electronic cigarettes is to increase battery life. You can use a larger and more energy-intensive battery - a cigarette.

The “mg” parameter on a pack of regular cigarettes and on a bottle of e-cigarette liquid mean completely different things. “Mg” on a pack of regular cigarettes indicates how much of the substance.

Many vapers are not interested in the question of how to clean the vaporizer of an electronic cigarette. But in vain! If you do not provide this element with proper care, it can have an extremely negative impact on the vaping process as a whole.

An evaporator (atomizer, vaporizer, steam generator, smoke pro) is one of the main parts in an electronic cigarette, through which the vapor mixture is converted into vapor.

Features of vape care

As mentioned above, in order for your vape to live happily ever after, you will have to look after it like a child. You need to provide high-quality and periodic maintenance to your mod.

To maintain your “pet” in frequency, you need to follow several rules:

1. Take a close look at the liquid. You should not buy liquids in some basement, somewhere on the edge of the city. Not only is there nothing good waiting for you there, but even the liquids are already expired for a year. This can affect not only the sense of taste, but also have a significant impact on health. Buy liquids in special vape shops that have all the licenses and rights to do so.
2. Learn to clean your vape not only in critical situations, but periodically, that is, for example, once every 2 weeks. The best defense is an attack, as they say. You shouldn’t let your device fail until additional problems arise.
3. Don't overdo the filling. There are people who like to vape deliciously and in bulk, pouring the entire bottle into the atomizer. Rest assured, you will get nothing but leaks from your mod and spitting hot liquid. It is recommended to fill the tank with 3/4 of the total volume of the atom. But it’s best to drip the drip until the liquid stops being absorbed by the cotton wool, usually 8-12 drops.
4. In maintenance-free tanks, rinse and clean it before adding a different liquid from the previous one. Otherwise, the flavors will mix and you will end up with some strange muddiness, sometimes downright disgusting. Don't forget this.
5. If you just quit smoking and switched to the vaping subculture, then you should not take deep and long puffs. Believe me, this won’t make you more steamy, this only happens with cigarettes. Here the amount of steam depends on completely different parameters. For example: resistance of the coils, battery power, its charge and several more, which you can all read about in previous articles.
6. Avoid charging batteries until they have been recharged. This, of course, only applies to cheap chargers, since good ones always have overcharge protection. But what will concern all novice vapers is a low battery. There is no need to squeeze out the last drops from it, this may have a bad effect on their resource.
7. Maintenance-free vaporizers should be replaced every 2-3 weeks, after which a lot of off-flavors will appear, which can affect your overall enjoyment of vaping.

How does an evaporator work?

In order to understand how to wash the evaporator of an electronic cigarette and whether it can be done at all, you first need to understand on what principle this device works. So, we have already found out that this component transforms the vaping mixture from the cartridge into vapor, which, in fact, enters the vaper’s lungs.

One of the components of the steam generator is a spiral, which has certain resistance indicators. Voltage is supplied to the evaporator from a power source (battery, battery pack), due to which the coil is heated and steam is generated from the liquid that enters here.

The electronic vaporizer performs the following functions:

• maintaining the steam mixture in the volume necessary to organize the steaming procedure;
• moving the liquid to the heating element of the device, which is most often a spiral (less often a metal rod);
• converting the voltage supplied to the steam generator into thermal energy, through which the coil is heated;
• actually, vaporization itself.

Vaporizers are divided into several categories depending on their design features.

Depending on what criteria for an electronic cigarette the steam generator device may differ:

1. Based on the principle of organizing the blowing process.
2. According to the method of preserving the vapor mixture in this part of the vape.
3. Based on the principle of moving liquid to the heating element. It is possible to equip the evaporator with one wick, which performs two functions - supplying liquid and, in fact, vaporization itself. In addition, there may be vaporizers with 2 wicks, through which these two functions are implemented separately.

This component of the electronic cigarette has undergone changes since the advent of vaping, as well as the vaping culture itself and the beginning of its operation to the present day.

Smoking apparatus design

To follow the suggested tips for cleaning an evaporator, you first need to understand the circuit diagram of the device. A pen vaporizer typically consists of three main components:

• A reservoir with a bubble device holds the liquid and is usually combined with the atomizer as one unit.
• Coil: A heating element that converts liquid into flavorful vapor.
• Battery: The device's power source. Voltage and temperature control options are available.

For box mods, the battery is contained within the case itself. Box modules are similar in design, except that they have a larger housing and more powerful batteries.
Because of this increased power, the vapebox often produces more vapor, increases draw, and improves e-liquid flavors.

• Those that are not replaced. These are vaporizers from the past. Today they do not have any advantages, so the vaping market is practically not interested in them.
• Those that are being replaced. Much more convenient to use compared to the previous ones.

The feasibility of cleaning the evaporator

Maintaining the cleanliness of the vaporizer is one of the conditions for the long service life of the vaping device.

If you clean this element in a timely manner, you will be able to significantly reduce costs due to the absence of the need to regularly replace gadget components.

If you do not rinse or clean the atomizer in a timely manner, then after a while vaping liquid will begin to flow out of the air outlet holes. And this, in turn, will not have the best effect on the performance of the battery pack and can even damage it altogether if liquid gets on it.

In addition, if this part of the electronic cigarette is not washed in time, this leads to a distortion of the taste and aroma of the inhaled vapor. The taste becomes bitter, more muted and even unpleasant, which significantly spoils the experience of the entire vaping process as a whole.

Signs that the atomizer needs to be cleaned are the following:

• reduction in the volume of steam produced compared to the amount issued previously;
• the occurrence of difficulties when inhaling vapors;
• complete absence of steam when inhaling;
• during the puff, sounds are heard that are not characteristic of this process (wheezing, seething, etc.);
• the appearance in the inhaled vapor of tastes and aromas uncharacteristic for this process and filling.

When vaping, a certain amount of the substances that make up the refill for an electronic cigarette does not burn and settles in the atomizer. Over time, these small particles begin to clog all the air outlets of the evaporator, which requires immediate cleaning to avoid damage to this component. We’ve already talked about when it’s time to clean the vaporizer.

To understand how to clean an evaporator, it is necessary to consider several methods of such a procedure. The most effective include:

• washing;
• burning;
• use of ultrasonic baths.

If you need to clean your steam generator for the first time, then, in order to avoid all sorts of problems with the functionality of the evaporator due to improper cleaning, it is better to seek help from a specialist.

Well, if you are completely confident in your own abilities and completely rely on yourself, then you can try some of the methods for cleaning this vape component.

Maintenance Tips

Knowledge of how to care for an electronic cigarette, how to clean the vaporizer of an electronic cigarette, is not always enough for its successful operation.

In the process of using a vape, a lot of information appears on how to properly care for it. Through trial and error, the vaper reaches the “golden mean” in handling this device. But to reduce the learning curve, here are a few tips on how to best use this device to improve its performance.

Recommendations for using a vape:

• Maintains ideal fluid level. Tanks should not be allowed to run dry. Each time you need to make sure that there is always a sufficient amount of liquid in the tank during operation.
• Do not overfill the tank, adding liquid to the very end. It is necessary to find the optimal filling level for a particular device for both the minimum and maximum quantities.
• Do not store the device in a hostile environment, expose it to extreme temperatures, or leave it in direct sunlight. This increases the likelihood that a leak has started or the performance of the vapebox has deteriorated.
• The evaporator should be stored in a safe place. When not in use, the device should be placed in secure storage to minimize any potential for damage. Ideally, you should buy a special storage tank. It will be especially useful when traveling.

All these methods, recommendations and tips will help in operating the device and will make it possible to use it for many years.

Electronic cigarettes require regular maintenance. Thorough cleaning of the components will allow the device to work longer, and you will enjoy the truly high-quality taste of your favorite liquids. But before you begin this painstaking work, we recommend that you familiarize yourself with effective and proven methods that will certainly make your life easier.

Use water

Don't think it's too easy. Many vapers, unfortunately, forget about basic things or use them incorrectly. The elements of your device need to be periodically washed under running warm or hot water. But it’s better to avoid cold ones. And even more so, you shouldn’t use detergents; leave them for dishes. If you want to eliminate the odor from previously used e-liquids, use vinegar. He will handle this task well. Dilute vinegar with water and rinse the cigarette parts with this solution.

Keep the ES dry

Keep an eye on the connectors. They shouldn't get wet. Otherwise, expect problems with the operation of the device. It happens that atomizers leak. Mistakes are also possible when filling the device with liquid. If you find a problem, remove the tank and dry the connectors with cotton swabs.

Clear Tissue will help

Use a special cloth to wipe your e-cigarette. To begin with, the material must be soaked for 24 hours in a special liquid. Then wipe the contaminated area with it. At the end of the procedure, rinse the elements of the cigarette under warm water and voila - the job is done.

Rescue vodka

In this case, taste preferences do not play any role. Another important thing is that alcohol dissolves fat perfectly. Pour it into the atomizer, blow it lightly, and there will be no trace left of the odors or remnants of the previous e-liquid.