Even those who have spared no expense in purchasing a bed are not immune to the appearance of squeaks - over time, the structure wears out naturally. However, if in most cases unpleasant sounds appear several years later, then why does a new bed purchased at a high price squeak and how to deal with it? Eliminating extraneous sounds in this case can only be effective if you find out the reason for their occurrence or take maximum precautions.
Beds 200×200
Why do beds squeak?
There may be several reasons why bedroom furniture creaks. The most common ones include:
- Wear of the structure. During operation, the connections and fastenings gradually become loose - and the question of how to eliminate the creaking of the bed, and how much it will cost, becomes more and more relevant.
- Problems with the bed base. A base made of wooden slats may creak due to contact between elements, broken fasteners, or a manufacturing defect if the base is new.
- Spring mattress. With use, the elements in the spring unit may become deformed and begin to rub against each other. This happens especially often with Bonnell spring mattresses. In this case, the question of how to get rid of a squeaking bed cannot be resolved without replacing the mattress.
- Legs. If the furniture is not level, a squeaking sound may occur due to the friction of the legs on the floor. Creaking is also possible due to contact between the frame and the upper part of the leg when the bed dries out.
Beds 180×200
Preventive measures
What can I do to prevent my new bed from squeaking? A fairly common problem, the following recommendations will help you get rid of it. Preference should be given to beds made from expensive natural wood. The most durable and durable:
- Oak is practical and durable, with a beautiful pattern, it is suitable for any interior;
- mahogany – noble color, original appearance and high quality. Products made from mahogany are moisture resistant and not exposed to ultraviolet rays. The furniture emits an unobtrusive aroma that repels various insects;
- rosewood - luxury furnishings are quite expensive. The products have exclusive qualities. By rubbing the wood a little, you can feel the delicate aroma of violet. High-quality pieces of furniture will delight the owners for a long time.
Pay attention to the frame - the elements must be firmly attached and should not dangle. It is better to choose a mattress with separate blocks. They are stronger and more durable. Over time, it must be turned over so that the load is evenly distributed over its surface.
When installing your new bed, try to position it as level as possible. An uneven load on the bed frame and base will subsequently lead to loosening and distortion of parts, and as a result, creaking. All fasteners must be tightly tightened so that the bed forms a solid structure. Metal products will be more durable. Another plus is their cost. Metal beds are cheaper than wooden ones. They also look beautiful and will suit almost any setting. Forged beds do not creak, they look stylish and elegant.
All wooden beds begin to creak during use. You can get rid of the annoying sound at home, the main thing is to correctly determine the cause and choose the appropriate solution.
What if the new bed squeaked?
When the furniture has just been purchased, and the question has already arisen of how to remove the creaking of the bed, the situation requires immediate action. In this case, you shouldn’t look for the source of the squeak yourself: such phenomena are most often associated with poor-quality assembly or factory defects.
The best solution is to contact the place where the bed was purchased. Store employees either correct defects in the assembly, or, if the defect is beyond doubt, replace it with other furniture.
The floorboard creaks
Quite often, in the premises of an old building, creaking occurs, the source of which is old boards. In addition, uneven flooring can also cause unpleasant sounds.
A floating base is an excellent solution for crooked or squeaky floors
In order to check whether this is so, you will have to make a small rearrangement of the furniture: by moving the bed to another place and lying on it, it will immediately become clear what is causing the squeaks.
How to determine the source of a squeak?
It is not necessary to completely disassemble the furniture to determine why it creaks. In such cases, experts recommend performing several simple operations:
- Remove the mattress, lay it on the floor and remove the slatted base.
- Check the mattress. To do this, you can sit on it, lie down or stand on all fours, pressing on different areas. If there is a squeak, the springs are already worn out, it’s time to change the bedding. If the mattress does not squeak, you need to put it in the bed and rock it slightly - sometimes the sound appears due to friction against the frame.
- Check the base. By pressing on it and pumping it a little, you can determine whether you can hear the creaking of the bed slats. The sound can be caused by incorrect or loose fastenings, or cracks and chips that have appeared.
- Check the frame. When checking, it is necessary to shake the bed itself - perhaps one of the fastening units or support strips has become loose.
- Determine the creaking of the bed lift mechanism. To do this, just raise and lower the structure. If an extraneous sound appears, the lifting mechanism must be replaced, since the gas lift cannot be repaired.
- Inspect the legs. Perhaps they are not firmly on the floor due to unevenness or are poorly secured to the frame. Also, the wooden floor under the bed may squeak when the boards become loose.
Beds 140×190
Prevention
If you are lucky enough not to encounter such a situation, this does not mean that you do not need to do anything. It is always easier to prevent a problem than to eliminate it.
- Of course, the quality of the bed and mattress itself directly affects the occurrence of squeaking. Therefore, when purchasing, you should pay attention to the quality certificate. An unsuitable mattress or broken bed not only leads to annoying rattling noises, but also to health problems. It should be noted that polymer mattresses have a lower risk of malfunctions. When choosing, you should pay attention to ventilation, because it can become moldy.
- It is better to choose wood or metal as the frame material. They last longer and cost less. The density of a chipboard frame is lower, therefore, there is a greater likelihood of deformation under high gravity. If the bed is wooden, then varnish its frame to prevent the wood from drying out. Regarding the type of wood: it is worth taking a closer look at durable species such as oak, mahogany or rosewood.
- Pay attention to each lamella, it should not wobble or dangle, all screws and screws must be in place.
- When installing the bed yourself, pay attention to the evenness of the surface. If the distortions are strong, then it will become unusable ahead of time. Uneven pressure on the frame leads to misalignment of parts.
How to remove squeaks without disassembling the bed?
You can eliminate bed squeaks without dismantling the entire structure. In this case, it all depends on the reason for the appearance of extraneous sounds.
- Mattress. As mentioned above, the cause may be wear of the springs - in this case, the sleeping accessory can no longer be used. If the new mattress begins to creak, the design of the unit may be slightly damaged. It’s worth trying to turn it over; if the problem persists, contact the store for a replacement.
- Strengthening the structure. If the fasteners are loose, they need to be tightened, often this is enough to eliminate the squeak. In furniture made from chipboard, it sometimes makes sense to reinforce the most vulnerable joints of parts with metal corners.
- Legs. If the creaking appears because of them, you can try moving the bed to a more level area of the floor or placing leveling supports-clamps under the legs. It is also worth checking and tightening their fastenings to the bed itself.
- Base. If the lamellas or lamella holders are damaged, they are easy to replace. This is a cheap consumable item that is easy to find on the Internet.
- Frame. The easiest way to eliminate squeaking is to tighten all fasteners. However, this may also only help for a short period of time and will require more thorough repairs over time.
Beds 120×200
, or a fatal coincidence
- A killer bed, or a fatal coincidence
- Underrated millet: does cereal really cure pancreatitis and hypertension?
- for flights and visiting cafes: bills submitted to the State Duma
- Choosing a drug for revaccinations: a doctor’s opinion
One of the residents of St. Petersburg found herself in an unenviable situation. A woman faces charges of manslaughter in the murder of her husband using a sofa.
Today, details of the unenviable situation in which a resident of St. Petersburg found herself became known. At the request of the investigation, her name is not being disclosed. A woman faces charges of manslaughter in the murder of her husband using a sofa.
This sounds comical, but it threatens, perhaps, many. The so-called one, on which the husband lay and which is sold in any store, formed with such force that it literally crushed the owner.
NTV correspondent Nikolai Bulkin
studied the furniture design, trying to understand if this was possible.
With a not-so-light movement of the hand, the bed turns into a closet. Furniture company managers always perform this trick with pleasure.
Victoria Slesarchuk, sales manager “For my design, I can say for sure: this is impossible with us. Without lifting, the bed will not slam shut. It's all very safe. Simple mechanism and popular beds.”
Operational footage of rescuers shows a dead man being removed from the lifting bed mechanisms. It is known that the tragedy was preceded by a family quarrel while intoxicated. The wife tried to wake up her husband, pulled the bed and it allegedly closed. The woman was unable to open it and only three hours later she called the rescue service.
Thorough elimination of squeaks
If you are not planning to replace the bed, you should try to strengthen its elements as securely as possible. Usually the frame is strengthened with glue in several stages:
- disassembling the frame;
- wiping parts, removing dust and dirt;
- degreasing the surface;
- applying glue to holes and joints;
- connecting parts, assembling the frame;
- leaving the bed until completely dry.
It is also possible to strengthen the structure of the bed with furniture corners - they are attached to the weakest joints and firmly fixed.
How to make a chest of drawers with your own hands at home
To process the structure, it is better to disassemble the creaky elements and degrease the joints with alcohol. Then let the structure dry completely, and only then apply lubricant. Wait until the junction of the wooden elements of the bed with the lifting mechanism is completely dry. Only after this can you begin reassembly. By performing these steps, the surface will become smooth and better protected from friction. Since there will be no friction, the creaking will accordingly disappear.
Alas, this is not always what causes the squeak. Read more about the renovation here.
We need to consider other possible options.
How to treat rubbing parts?
If the furniture is in good working order, it is enough to treat the rubbing parts with lubricant to permanently eliminate extraneous sounds. It remains to find out how to lubricate the bed from squeaking - for this you can use:
- paraffin - in the form of a special bar or an ordinary candle;
- laundry soap - for rubbing until completely smooth;
- silicone lubricants - special compositions for treating parts subject to friction;
- WD-40 is an aerosol for short-term lubrication of beds with a metal frame.
If the bed squeaks, you don’t have to immediately think about replacing it. In most cases, the causes of unnecessary sounds can be combated - just carefully examine the entire structure, find the sources of creaking and put a little effort into eliminating them.
SON.ru will help you with your choice
Our specialists are the best experts in matters of comfortable sleep and are always ready to help you. We are in touch and will answer all questions. The consultation is absolutely free.
Legs
It happens that the reason for the creaking lies in the legs of the furniture. This defect is the most difficult task for home repairs. The legs, of course, can be replaced with others, but installing them can be quite difficult even for professionals. But you can simply remove the legs, for example by cutting them down, without special skills and tools. In addition, instead of a boring classic bed, the result can be a new fashionable and original element of the interior - a platform for sleeping and relaxing, standing directly on the floor.
