Photos of handmade slippers
rag slippers
The most common hand-sewn home slippers are made from fabric. The material for them can be found in any home and even a child can cut them out! Fabric house shoes are the lightest in weight.
glamorous leather flip flops
House slippers made from pieces of leather are considered a special delicacy. They are the most durable compared to other indoor shoe options. Look cool with any home clothes and give it a special shine
felt galoshes
Separately, it is necessary to note the beneficial properties of felt slippers. They are soft and warm, wearable and easy to sew due to their loose texture. They are also believed to be medicinal.
homemade fur slippers
This is a whole professional product. Every family has an old fur coat or hat from which they can construct homemade shoes. You can take worn-out slippers or moccasins that were comfortable in the past, torn, and rip them open. The resulting parts will serve as a template for the pattern.
uggs are the best friends for our feet
Do your joints hurt? Sew yourself some homemade UGG boots. They are sewn simply and very quickly from four parts. You can use an old sheepskin coat. Cut out four parts: sole, heel, front cuff, toe. Sew all the parts together with a thick, strong thread, with the seam facing up. Tuck the top
white fur boots
House shoes, boots, also made with your own hands at home. It is very relevant for people who are constantly cold or have joint problems.
felt booties
Very easy to sew. Outline the child's leg with an allowance of 0.5 cm. Cut out the top and accessories (butterfly, leaves) from different colors of felt. Sew the top to the sole using a sewing machine. Sew a rectangle of Velcro on the inside of the fasteners.
baby homemade chuni
The upper is made of fur fabric inside on a knitted base. Suitable for the youngest family members. Three parts are cut out: a whole part of the side parts of the upper, the toe part of the upper with a tongue, and the sole. Sole made of thick fabric or leather. The rest of the details are made of fur fabric. All parts are sewn together using an over-the-edge seam.
denim house shoes
Looks very stylish. Of course, she is loved primarily by fashionistas and fashionistas. Suitable for all ages. Both young and old will feel stylish and comfortable in them. A pattern is made on paper. It is used to cut out details on the fabric. Dense material is used for the sole and lining. The insole is made of pleasant fabric. All parts are connected according to the diagram and you're done.
fur children's paw slippers
For these slippers in the shape of an animal's paw, the sole is cut out in two copies for each slipper (one is the sole, the other is the insole). To trace your foot with a pencil or pen, it happens right away right on the back of the fur fabric. A strip of 6-10 cm for the cuff is cut out separately. The top of the slippers is cut in one piece. The seam of the upper is made at the heel. The cuffs fold in half. All parts are sewn together.
Material selection
The way you feel when wearing shoes is largely influenced by the material from which they are made. In addition to the convenience and presentation of products, it is necessary to take into account such criteria as hygiene, thermal conductivity and strength.
In order to sew warm house slippers with your own hands, you can use the following blanks:
- An old sheepskin coat or sheepskin coat. Sheepskin has high thermal insulation properties, softness and stretchability. It is better to make slippers from a sheepskin coat from sleeves or floors, since the back and chest parts can later be used to make a vest.
- Tops of winter leather boots. Natural material has high strength and wear resistance. The downside is that it has too thin a layer of fur, which is not enough to provide reliable protection from the cold.
- Artificial fur. Synthetic products look good, are not afraid of dampness, and can be machine washed without problems. It’s not difficult to sew slippers, but the prospects for such work are questionable - synthetics do not absorb moisture and cause a lot of steam on your feet. There is a high probability of developing fungus and allergic reactions.
After choosing the material, you need to decide on the model of slippers. Depending on individual preferences, the pair of shoes produced may have an open or closed toe, heel counter or cuff.
Old sheepskin coatFaux fur
Tops of old winter boots
Patterns with sizes of home slippers master class
It’s quite easy to sew ordinary house slippers using ready-made patterns. They are redrawn to life-size size on paper. Cut out the patterns and trace them on the fabric. Cut out the required number of parts. We start assembling using a standard sewing pattern.
- The upper parts are sewn together with the insole, the upper is blank
- Sew or glue the sole elements, the bottom blank
- The bottom and top blanks are connected with glue and stitched for strength.
- Decoration or fasteners, lacing are attached
sew home slippers using patterns
Use these patterns to quickly create simple slippers. You will need any material for the top and thick material for the bottom. Strong threads and thick needle.
bunny boots, master class
Fun and comfortable bunny boots will warm you up and lift your spirits. It's not difficult to sew and anyone can do it.
- Fabric is selected. The material used for manufacturing is soft and dense, plush, velor or fleece. Leather or substitute for the sole. To give shape, padding polyester (but not necessary).
- Tools are selected. A sheet of paper for a pattern, a pencil, bait needles, scissors and a sewing machine.
Always needed, needed everywhere
Humanity invented shoes 30 thousand years ago. With the approach of cold weather, ancient people wrapped their legs with pieces of leather or animal skins.
In hot countries, hunters protected the soles of their feet from hot sand with the help of dense tree bark.
Since then, the materials for the production of shoes have changed, the style and cut have been improved, but this item of clothing has been and will be necessary at all times.
How to cut fur slippers with your own hands, step by step with photos
Experienced needlewomen advise starting to sew slippers with simple slipper models. They can be open or closed from any available material. By making such slippers, you can learn the basics of patterning and sewing house shoes.
The technique is very simple. To begin with, a pattern is made. Using the pattern, the contours of the parts for sewing are applied to the material. For the sole, use dense and thick material. The parts are sewn together and the decorations are attached to the finished slippers. For ease of wearing, a low heel is glued to the sole. This can be done conveniently with a glue gun.
their unique sizes are taken, patterns are made
You will need to take the following measurements from your leg. Foot circumference along the outer edge, length of the top of the slippers along the inner edge, along the outer edge, heel.
Starts with the circumference of the foot. To do this, place your foot on a blank sheet of paper. Old unused wallpaper is used for this.
You can tear out the middle of a notebook into a square. Outline your mark with a pencil or pen. That's it, the soles for the slippers are ready! The heel part of the “heel” is 1/3 of the length of the foot.
Now other measures are being taken. All measurements are taken on the foot in accordance with the already made sole pattern. To do this, place your foot on the pattern of your foot. For the top of slippers. The length of the top of the slippers is measured.
To do this you will need a “centimeter”. The “centimeter” is located from the edge of the big toe on the foot in a straight line to the level of 2/3 of the length of the foot.
The next foot width measurement is needed for the top pattern. This is the width along the inside edge along the rise line.
This measurement is taken to determine the distance from one side edge of the foot pattern to the other. The measuring tape is placed across the instep of the foot.
The pattern piece is slightly shaped, but according to your measurements.
Everyone is ready with personal measurements for future shoes. And according to them, patterns are made according to the sketches of the drawings.
patterns of all parts are made from materials
First, the pattern figures are redrawn “by eye” from photos onto paper. Then they are adjusted taking into account the required dimensions. A paper pattern is cut out with small allowances. Applying it to the leg and finally adjusting it with scissors.
As an example, work is being done for a male model. For women's, simply take a different material, size and add decorations (optional).
To do this you will need: Upper part:
- Faux fur. An old fur coat or vest can come in handy here. For the top layer of the top of the slippers (on the left in the picture).
- Batting or a piece of cloth for cleaning the floor (not used), for insulation (center in the photo).
- Thin, pleasant fabric for lining (on the right in the picture).
Bottom, sole.
- Something durable for the soles. It can be a piece of felt, thick and rough leather, or rubber. The sole of an old shoe is used, a little larger in size, so that a part of the desired shape can be cut out of it (on the left in the picture).
- Batting is also used here for insulation; a pad is cut out of it, slightly smaller in size than the sole (centered in the photo).
- For insoles, dense but soft fabric is used. You can use ready-made insoles, which are sold at any hardware store. Buy a slightly larger size and cut it out according to the pattern (on the right in the picture). The size of an insulated pad.
An additional detail is an elastic band 3 cm wide or a synthetic strip of the same size.
To make women's or children's, you need to take the appropriate size, select the appropriate material and decorate with decorative elements.
Ugg boots for baby
Making home boots is easy. To do this, you only need a little skill in working with a needle. The only condition is to strictly follow the instructions on how to sew boots from fabric. The pattern is offered for sizes 24-27. If necessary, it can be adjusted to any leg, but it is worth considering that when changing the size, the pattern changes more in length than in width.
For UGG you will need:
- Artificial sheepskin 20 cm with a width of 140 cm: all 2 pcs.
- Square piece of artificial leather with a side of 20 cm: sole 2 pcs.
- Optional decor.
DIY children's slippers, photo 3 options
Slippers are cut in the shape of animals or cartoon characters. The shape can be in the form of boots or sandals.
corduroy sandals
For these sandals you will need thick corduroy fabric with any pattern for the upper part of the sandals, a piece of thin suede for finishing the edges with piping and for the fastener straps, 4 buttons instead of clasps.
The upper part consists of 2 whole different parts, the binding for the edging and the strap for the fastener. There are button holes along the edges of the clasp. Buttons are sewn on the upper part on the sides.
It is better to make the lower part from three identical parts in shape. Two of which, the sole and insole, are the same size, and the middle one is 0.5 cm smaller around the entire circumference.
A piece of corduroy is cut out for the top (on the left in the picture). The second (in the center of the picture) is made of soft, pleasant fabric for the body, this is for the inner part (lining). Both parts are connected to each other with a strip of suede. Place the pieces facing inwards. Turn inside out and steam with an iron.
The middle part of the “loop” is tucked inside the sandal and hemmed. Along the bottom of the resulting top, from the outside, another suede trim is sewn face to face along the entire circumference. Fold the resulting border onto the wrong side of the top of the sandals and hem it.
For the fastener strap, a rectangular piece is cut out, sewn face inward and turned inside out. The ends of the parts are turned inward and hemmed. Slots are made along the edges of the fastener for buttons and the edges of the holes are sewn so that the fabric does not fray.
The upper part of the sandal is connected to the lower part of the sole using over-the-edge stitches made with thick nylon thread.
children's slippers in the shape of Czech shoes
Made from felt or thin felt. Main details: one-piece upper, outsole and insoles. The jumper at the fastener is crocheted from yarn.
The mouse's face is made up of appliqué cut from fabrics of different textures and colors. Each piece is sewn with “felt stitches”.
The ears are made from two circles, a larger one in size and a smaller one of a different color. The eyes are black buttons. The nose is cut out of black fabric and secured with glue. Mustaches made of thick yarn in two colors.
glamorous booties
A sports model for young fashionistas made of felt in the form of sneakers. They are sewn quickly and by hand. You will need felt or felt, two colors. Five parts of the cut: back of the upper, toe of the upper, front part of the upper "tongue", outsole, insole, padding 0.5 cm less than the insole and outsole. Lace and loop strip for decoration.
You need measurements from the child's feet. According to the obtained dimensions, patterns for all parts are made. The contours of the cut details are transferred to the fabric.
We knit exclusive soft shoes
If you have knitting skills, you can create airy soft ugg boots that will definitely be unique at a holiday party.
To do this, you will need yarn to match the suit, knitting supplies and inspiration. And with the help of our diagrams, the creation process will be easy and flawless.
According to the presented pattern, we knit 4 identical parts.
Then, using connecting posts, we combine 2 parts together.
We continue to knit the product according to the detailed pattern shown in the photo.
You can also use auxiliary materials, such as paper clips, for ease of operation and correct execution of the diagram.
This is the beauty you will get in the end.
These boots look incredibly airy and delicate. They will look especially neat on little children's feet.
Of course, the options presented in the article can be freely interpreted to suit your taste. For example, you can safely experiment with types of fabric, color palette and decorative methods.
How to sew slippers and boots with your own hands, master class
House slippers are women's favorite footwear. They are beautiful and comfortable. They are always warm and cozy. By making such boots, every woman can express herself, and this creates a good mood.
To sew slippers and boots for the house with your own hands you will need:
- Fragments of “wool” or “faux fur” fabric for the main details.
- Cotton fabric (any) for lining.
- Sintepon or batting for filling.
- Felt or other very dense and thick fabric for the sole.
The patterns correspond to foot size 38. To change the size, outline your foot on the sheet, compare the details of the lower part with this sketch and thus adjust it to your size.
all the necessary details are cut out
- Start with the sole. Two parts of the sole are cut out (on the left in the picture), one from felt, the other from thick cotton instead of glass.
- For the main parts, wool or fur fabric is used. The parts are cut out in 2 copies asymmetrically (in the center and on the right in the figure).
- In the same way, parts are cut out from padding polyester for filling and parts from cotton for lining. There should be three sets of different fabrics.
process of assembling boot parts
- The details of the sole are cleaved with needles and the edging is made from bias tape. Additionally, the seam is also processed with a zigzag. On the second boot, the sole is made asymmetrically.
- The bottom and top are sewn face inward along the lines shown in the figure in separate colors. The back part is also sewn along the heel line, marked in yellow. This turns out to be the outer part of the boot blank.
- The padding polyester and lining parts are sewn together using the same steps.
- Two blanks are folded into a “sandwich”: the outer one and the padding polyester one, and they are chopped off. These parts are quilted together.
- The top edge of the entire boot blank is indicated in pink. The edge of the top is edged with bias tape.
- The quilted top piece is turned inside out. It is sewn with the sole placed face inward using stitches “over the edge” using a strong thick thread. Turns out on his face.
- The lining blank is placed inside the boot blank and hemmed at the top to the bias tape, and at the bottom to the seam of the sole and top.
- A rectangle is cut out from the remains of the main fabric. Fold in half facing inward, stitched around the perimeter, leaving one edge unsewn.
- It is turned onto the face through the unsewn edge, after which it is hemmed. In the center of the resulting rectangle, a thread assembly is made.
- The resulting bow is attached to the side of the boots as a decoration.
The house slippers and boots are ready and it takes 1.5-2 hours, no more.
DIY jeans slippers, photo 3 options
Denim slippers are made from old trousers, skirts and bags. First, make a pattern based on your foot for the sole. Any thick fabric or material is suitable for this. Trace around the foot and you're done. Whatever is at hand is used as material. It could be an old camping mat, a thin rubber boat, a car tire tube, etc. Well, they classically use leather, felt, or felt for the sole.
women's denim slides
We used several scraps from old light blue jeans, a piece of felt, and pink satin ribbon for lacing and decoration.
The pattern pieces are cut out from the felt foot in 2 copies. One will be the pad, the other the sole. The same pattern with an allowance of 1 cm is used to cut out denim insoles on the bias.
A bias tape is also cut equal to the circumference of the foot. Cut two pieces of satin ribbon for bows. That's it, the pattern is done. Begin sewing slippers from the top. Fold the two parts with the wrong side together and sew them together with a seam “over the edge” along the rise line.
In the center and at a distance of 1 cm of the resulting top element, slits are made the width of a tape and a distance of 5-7 cm. These holes are processed with a “overlock stitch”. A ribbon is inserted into these holes and a bow is tied.
When wearing such slippers, the denim material quickly stretches out and you can use a ribbon to adjust the tightness of the fit to the foot.
Sew the top to the front side of the insole. The top is ready. The edge is processed with bias tape along the entire circumference. The workpiece is glued to the gasket with the wrong side and the bias tape is turned to the side of the gasket and glued.
The top of the slippers is ready. To complete the process, the upper is glued to the cut out sole and that’s it.
Czech style denim slippers
Made from denim, felt, cotton. For fastening, a large button from an old coat. Measurements are taken from the leg. A pattern is drawn according to size.
Five parts are cut out for one slipper: one-piece upper 2 pieces made of Jeans in a mirror image, fastener strap 2 pieces made of Jeans, insole 1 piece made of cotton, lining 1 piece made of felt, sole made of felt 1 piece.
Sew starting from the top. First, fold two strips of the strap together wrong side out and stitch along the edge with an indentation of 1 cm. Make a slot for the button on one edge and overcast it.
The two parts of the top are folded inside out and a strap is placed in the center. Stitched by machine or by hand.
The front side of the insole is sewn to the back of the upper. Glue it inside out onto the gasket, fold the seam allowances over to the side of the gasket and glue it.
At the end of the work, a felt sole is attached to the resulting top. Glued or stitched. Sew buttons on the sides of the slippers for fastenings.
stylish denim slippers
For this model, needlewomen use thick and thin jeans, foam rubber, felt and thick rough leather. The details are cut out according to the contour around the leg: Leather sole Insole made of thick Denim with 1 cm allowance.
- Bias tape length of sole circumference
- Felt pad
- Heel made of foam rubber and thin denim
- Top made of thin denim in the form of triangles four pieces
The upper triangles are sewn together, two folded inside out. They turn out on their face. Part of the foam heel under the thin jeans is sewn to the insole.
The insole with triangles is folded and processed with bias tape. The padding is glued to the underside of the insole and the seam allowances with the tape are turned to its side. The sole part is sewn or glued to the entire structure. The second slipper is made in the same way. Triangles are tied on the leg across the width of the foot.
Beauty pleases the eye
The upper part of the house boots can be decorated with a wide braid or satin ribbon. If you know how to weave with beads, then make a patterned strip and sew it to the boots.
A pattern or ornament can be embroidered on the boots themselves using floss threads. Or crochet balls and attach them to the sides of your cozy shoes.
Video: pattern of children's and adult slippers
whipped up slippers from old jeans
Knowing how to make house shoes is cool! It can come in handy in the most unexpected situations. For example, give a nice gift to a loved one. And it’s pleasant, and convenient, and beautiful.
DIY “Cookies” slippers
Creative flights of thought sometimes produce pleasant products. It’s enough to take a closer look at the old things at home and you’ll definitely find something for making house shoes. Let's say these could be comfortable slippers.
In ancient Rus'
The nobility wore such shoes, and the peasants were content with bast shoes both in summer and winter. These products became the prototypes of modern boots and slippers.Russian boots had sharp, raised toes. These boots were called ostrogs. They were made from morocco, chrome, and yuft. They were embroidered with pearls and other precious stones.
How to sew leather slippers with your own hands, step by step with photos
The most spectacular house slippers are leather ones. They last longer and remain in excellent condition.
They are sewn as simply as other types of house shoes. The only thing here is that you will need slightly different tools and materials. But, all these tools and materials can be easily found in every home.
What is needed for production:
- Faux and real leather. Priority goes to thick flaps. Entry will include old women's bags, used shoes, furniture, old jackets, hats and raincoats.
- Not a thick piece of felt
- Small piece of foam rubber
- Disposable slippers
- Non-woven fabric with adhesive backing
- Shoe glue or Moment or even super glue will do
- Special needle. Thick, curved edge. If you don’t have one, a crochet hook will do.
- Old house slippers for pattern
- For holes in the skin, a punch. If he's not there, it doesn't matter. A thick nail and pliers will do. Using a hot nail on a gas stove, clamped in pliers, you can easily burn the required number of holes.
The work begins with the soles of disposable slippers. Glue all the slots with glue and wait for them to dry.
But while the glue dries, without wasting time, unripe the old slippers in order to make a pattern out of them.
New soles are cut from the soles of disposable slippers using a pattern made from old slippers.
Four pieces of leather sole are required for the outsole with allowances of 1 cm along the contour. For the top of the slippers, 4 parts of the top are cut out, also according to a pattern from old slippers with 1 cm allowances, on the sides at the junction with the sole.
The 2 parts of the top are cut out of non-woven fabric, 1 cm smaller along the entire contour. Non-woven parts are glued through gauze with a hot iron to the front side of the top parts.
To continue making leather slippers, two upper parts are glued together. Coat the edges at a distance of 1 cm with glue and connect. This is done by weight, on the hands to give shape.
After the glue has dried, the parts are trimmed around the circumference with scissors.
The next step is to use a punch (or a nail heated on a fire) to make holes from the edge, retreating 0.5 cm and keeping a distance of 1 cm between the holes. This is done along the line coinciding with the rise of the leg and fingers.
A 7 mm strip of leather is also cut out, threaded through a needle and stitched over the edge going through each hole.
The ends of the leather tape are glued to the wrong side of the part with glue.
Now cut out insoles from felt or felt, 2 pieces. For this, an outsole pattern is used. Additionally, two half-insoles are cut out.
Two “heel” parts are cut out of foam rubber. All these parts are glued together like a “sandwich”.
First, the outsole is glued to it, the insole generously lubricated with glue is glued, then the “heel” is glued under the heel and the half-insole is glued last. This produces the basic blank for the bottom of leather slippers.
Leather soles are glued to this resulting workpiece on both sides. Apply liberally with glue along the contour of the leather parts.
The entire resulting structure dries well. Then the upper part is glued to the lower part along the side lines.
The steps are repeated with punching holes with a punch or burning with a nail. The distance is 5 mm from the edge of the slippers along the entire circumference and 1 cm from each other.
An additional cut leather tape with a thickness of 7 mm is used to stitch the entire edge of the slippers. The next one is glued to the ending leather tape and stitched in this place for strength.
The soles of these slippers look durable and well-designed.
For a more impressive appearance, the slippers are painted with acrylic paints and coated with acrylic varnish.
Women's slipper styles are decorated with flower appliqué.
These are the simple and easy steps needed to sew leather slippers with your own hands. Such indoor shoes serve their owners for a long time. Suitable for use in the bathroom and kitchen.
DIY felt slippers, photo 3 options
For greater comfort, coziness and warmth while at home, use felt slippers as house shoes. Sewing them yourself is not difficult or time-consuming.
The felt used to make such shoes is made from dried camel, sheep or dog hair. There are many benefits from such slippers, since they are natural.
Well, what is its main benefit, besides convenience, durability and simple manufacturing techniques?
The secret is simple. Felt creates a thermal effect. In this way, spontaneous healing of the leg joints from rheumatism occurs. These shoes help with aching bones. Prevents excessive sweating of the feet.
Wearing felt slippers promotes foot massage. Blood flow increases. This leads to an acceleration of metabolism in the body. It is recommended that old people, children and sick people at home wear only such shoes.
Slippers are easy and quick to sew
The pattern is made from thick felt. The leather sole is cut separately and is 1 cm smaller around the perimeter.
The sole pattern is sewn on a machine or glued with glue using a “straight seam” of leather to the felt pattern at the location of the sole.
It is folded so that there is one seam on the side of the foot. Slots are made with a knife or scissors and a ribbon or lace is threaded into these holes. The end of the lacing is secured with a small bow.
A simple version of felt slippers
It is very easy to do from the point of view of sewing homemade felt flip flops. Made from four parts: two halves for the top and two for the sole.
The soles are made from a sketch created from a pencil outline of your foot. The top is cut out on paper randomly according to the photo. It rests on your leg and is adjusted to your size.
The seam of the top is done using a “overlock stitch”. Next, all the parts are assembled and sewn with hand stitches using a strong thread.
felt sandals
Video: how to make unusual felt slippers
As life experience shows, handwork is not only a profitable activity that gives a second life to outdated and worn-out things, but it is also quite an exciting activity. There are no special difficulties in this work. Tools and materials can be found in any home.
Once you learn the basics, you can make a lot of house shoes. Enough for both household members and guests. You can also provide for all your friends and generally start your own small business. Handmade footwear. Create, wear and give.