Instructions for assembling a crib with a pendulum

What is a pendulum bed

First you need to understand what a transformable pendulum crib is. A transformer is usually a product that combines several functions; in addition, it can easily change depending on the age of the baby.

Such a crib can perform several functions. Typically, a transformer contains several elements:

Frame.
Mattress bed.
Boxes for storing linen.
Sides for holding the child.

Most cribs with pendulums also have special drawers for storing linen. The transformer is distinguished by the fact that in addition to the bed, it also contains containers for storing things. It may also change depending on the age of the child.

Depending on the age of the child, the height of the crib may vary. When the baby is very small, the mattress bed can be installed at a higher level so that the mother does not need to bend low and strain her back. When the baby grows up and begins to be interested in the world around him, so that he does not fall out of the crib, the mattress bed is lowered and the sides reliably protect it.

When the child grows up, the mattress bed can be lowered, thereby increasing the height of the sides. The pendulum mechanism allows you to imitate the natural motion sickness of the mother. Thanks to this, the baby easily falls asleep, and the mother does not need to hold him in her arms.

Rocking a child in such a crib is easy and very convenient. Moreover, the mechanism has a lock so that the bed does not constantly rock. It is precisely because of such a large number of mechanisms and parts that the assembly of a children's bed with a pendulum and transforming elements is the most difficult.

The pendulum mechanism creates a comfortable motion sickness for the baby in the crib.

Which one to buy: types of bedroom furniture for babies

Girls, does anyone know how to fix a pendulum crib? The baby is already a year old and cannot sleep in his crib.

If necessary, the rocking chair can be in a stationary position; for this purpose, special clamps located at the bottom of the side panels are used.

The model includes a frame, bed, legs, backrests, and a pendulum mechanism. Many products are complemented by drawers, changing pads, and chests of drawers for storing things. In what sequence to assemble a children's bed with a pendulum according to the instructions:

The back part is connected to the side strips using screws.
The berth is first mounted on screws, then on guides located on the sides.
The structure is turned over to install the pendulum mechanism.
Linen boxes are inserted, the side wall of the pendulum is fixed with screws.
All plugs are closed.

And I bought my crib completely unexpectedly for myself - I ran into the store 5 minutes before closing just to “feel” the material, and in the end I paid for it on the same day, and was also very pleased with it. You could store the crib with them even until the birth of the child, and delivery was carried out within 3 days after the call.

An additional function of the crib is a pendulum mechanism. It allows you to simplify the process of rocking your baby. But it should be remembered that the pendulum should be used only in the first months.

But here, it seems, the mattress is placed on boards, as they are called, chipboard, and for protection there is just such a small fence. There's a fence inside. Or is it just for the mattress?

Beech is the most durable and wear-resistant type of wood; 87% of Italian furniture is made from it. And the Italians boast of their approach to the selection of quality materials for the manufacture of furniture. Therefore, a transforming bed made of solid beech is a very reliable and environmentally friendly design

Separately, you should pay attention to the paintwork of the transforming crib

Let's start assembly. The timber was connected to the dowel using a countersunk screw and wood glue. Probably it was possible to do without screws, but I wanted it that way. All holes were filled with putty.

Assembling the crib

Practice shows that modern cribs mostly have multifunctional parts. Standard parts are:

bed frame;
supporting part of the mattress;
special sides (can be soft or made of fabric);
niche for linen or without a drawer;
pendulum mechanism.

Let's start with the preparatory work:

Please note that it is better to assemble the crib in the child's room. This way, you don't have to drag it around the entire apartment. After you have removed the packaging, set the larger pieces aside and place the smaller pieces on a light-colored fabric. Place all the necessary tools near you

Be sure to read the instructions before assembly. Make sure that all the necessary parts, bolts and operating systems of the crib are present. Do not neglect studying photographs, drawings or diagrams. This will greatly facilitate your work and speed up the assembly itself.

Once all the above preparations have been completed, we move on to the assembly process itself:

We always start work with the main structure, namely the fixed back wall. Define top and bottom. All side walls have legs.
Place the back wall on the floor with the inside facing up. This way you will see the necessary grooves for fastenings. Tighten the screws correctly to avoid stripping the threads and damaging the furniture itself.
After this, we move on to the bed - the supporting part of the mattress. This is a kind of wooden or plywood rectangle made of transverse slats. The supporting part itself should be secured with screws. But don’t rush to screw them tightly. First, choose the optimal height. Professionals advise choosing a higher position, as it will be easier for the mother to position the baby. As soon as the child learns to stand, the bar should be lowered.
As for the moving parts of the bed, insert it into the guide grooves of the two side elements.
We turn the entire structure over for subsequent assembly and attachment of the swing mechanism.

Assembly process: step-by-step instructions

You can assemble a crib with a pendulum-shaped mechanism using the following instructions.

The fixed rear part is screwed to the side elements of the crib using screws. It is enough to take 4 screws, placing 2 on each side

It is important at the time of connection not to confuse the upper and lower parts at the back wall of the bed. In the case of side panels it is simpler; they have legs that allow you to accurately determine what should be at the top and what at the bottom

Pendulum crib with chest of drawers After the frame has been formed, you should proceed to installing the bed for the child's crib. It can be in the form of a solid element or look like transverse boards that are held in place with a cord. It is not recommended to secure the baby's crib bed too tightly. To begin with, it will be enough to “tighten” the structure with the required number of screws. Baby crib pendulum made of solid wood. The side parts have special guide grooves. The front wall of the bed should be secured to them. After this, you can begin to secure the screws more firmly in the bed of the crib. White crib pendulum Turning the entire structure over, you can completely notice the presence of metal grooves into which the wheels are inserted. If you want to roll the bed, you should install them. If you plan to rock the structure with the child on the side elements in the shape of arcs, then the crib does not require wheels. Crib pendulum Before installing the pendulum, you should attach a linen rack (if available). After this, you can proceed to securing the front side part. Pendulum bed made of solid wood To place the bed on the pendulum, you need to attach plates to the side parts of the structure. White crib pendulum Then the bearing systems are installed. Upon completion, clamps are placed on the crib to avoid injury to the child.

Beige pendulum crib made of solid wood Assembling a bed with a similar mechanism is quite simple. To prevent the screws from sticking out and spoiling the appearance, they can be hidden behind special plugs.

What it is?

A crib with a pendulum is a piece of furniture that is made of wood and equipped with a swinging mechanism - a pendulum. If the baby has not yet been born, it is difficult to determine whether this model should be preferred. Medical experts disagree, so making a final choice is not easy.

Transformable bed with pendulum and drawers:

The principle of operation of the pendulum mechanism is simple: the rocking chair is set in motion by touching the body with your hand. The baby, moving in the crib, is also able to launch it himself. The main requirements are that it should not stand close to the wall with its moving sides and should be equipped with a lock:

Here are the main steps

Prepare your work area. Usually it is covered with a light material, on which even the smallest details such as screws will be easily visible (this is done so as not to lose anything); Assemble the frame. To do this, first connect the back guide and two side walls together, and then the front

Don't confuse where is up and where is down! Important: if the front wall is assumed to be movable, it should be installed after the base has been installed; According to the attached instructions for assembling the crib, install the bottom (usually it consists of a lattice base and a plywood sheet); If the model has wheels, now is the time to turn it upside down and install the wheels in special grooves or simply screw them on; Now you can assemble and install the pendulum mechanism on those cribs that have it; Basically, everything is ready. All that remains is to check the reliability of the assembly, the operation of the mechanisms and equip a cozy and safe sleeping place for the baby

To do this, we invite you to visit the Sleep Therapy website, where you will find a wide range of different mattresses and bedding. Comfortable, modern, high quality!

Remember that assembling a crib is always based on the instructions. Follow the sequence of actions, carefully monitor the fastening of parts - and then everything will definitely work out! There is no rush to complete this task. A correct, thoughtful and unhurried approach is the key to its successful solution.

The crib assembly diagram is the fundamental document when purchasing this piece of furniture. Let's figure out how to read it correctly so as not to make a mistake in the end.

Here is one example of such a scheme that we will work on:

Here we show how to assemble the most common model of a bed for a baby: with a mechanical pendulum system (the wheels are removed and the swing is carried out by means of semi-arcs located at the bottom of the side walls), wheels and a removable front part. The first picture shows how to install the half-arches. On the second - fastening the side and rear walls. The third image explains how the bottom is installed, in the fourth we see the attachment of the front part. Figures 5 and 6 are more specific and show how to properly attach the bottom and make the box.

In fact, reading the diagram is perhaps the most difficult task in the entire assembly process

It is important to understand each stage and understand what conventional images convey. That is why we recommend that you carefully read not only the schematic images, but also the accompanying text.

How to assemble a crib with a pendulum

You can assemble a baby crib at home yourself; you don’t have to call a specialist for some money. In this case, you should follow a few simple rules and prepare wisely.

To quickly and correctly assemble the crib, you need to prepare.

Assembling the crib should be done in the child's room. Otherwise, you will have to carry it across the entire apartment, which is very inconvenient.

Before assembly, it is necessary to prepare a place for work, that is, to free up space. Then you should release the parts from the packaging, lay them out and count them. In this case, large parts must be put aside in one direction, and small ones in the other.

In order not to move the assembled bed to another room later, it is better to start assembly immediately in the nursery.

For small details, it is better to prepare a light fabric: a blanket or a blanket. This way they will be better visible and will not get lost.

Drawing and instructions

After the crib is unpacked, you need to carefully read the instructions for assembling the transforming crib with a pendulum. Unfortunately, for products sold in online stores, instructions are not always provided in Russian. In this case, you have to act based on the scheme and intuition.

Be sure to read the instructions that come with the crib. If there are instructions, you must read them. If the instructions for assembling a transforming bed contain photographs, it is better to carefully examine them, no matter how simple they may seem. This will help with assembly later.

If the instructions are illustrated with photos, be sure to study them. Place the drawing in a convenient, visible place. A good place might be where small parts are kept.

Main design details

The crib usually consists of a frame, a bed, a swing mechanism and other elements. The side walls and bed are the largest elements that ensure the reliability of the entire structure and the baby’s stay in the crib.

All cribs consist of a main frame, a pendulum and additional elements. The pendulum mechanism can be designed in different versions:

Longitudinal. The simplest, most popular option. At the same time, it best imitates natural motion sickness. Medical studies have shown that this particular option helps normalize intracranial pressure.
Transverse. The movement occurs from side to side. Assembly of this product is a little more complicated.
Universal. The cradle is attached separately to the sides. Thanks to this, she also has natural motion sickness. Later, the cradle can be removed and the baby can be placed on a bed that lowers down.

The pendulum mechanism for the crib can be longitudinal, transverse and universal. Depending on the type of rocking mechanism, cribs are assembled differently. But the basic principle is the same: first, the main elements are assembled, and then the swing mechanism is attached. First you need to collect all the main elements.

Necessary tools and components

It is also necessary to prepare the tools that will be required for assembly. The usual set for this is:

Screwdrivers of different sizes and sections.
Wrenches for nuts of different sizes.
Screw keys, they are usually included in the kit.
Screws.
Plugs.
Main components.

To assemble the crib you will need a certain set of tools.

Bed assembly

Once everything is prepared, you can begin assembling the crib. It is important to start the process by assembling the main elements.

Assembly begins with connecting the main elements. It is necessary to determine the top and bottom of the main elements. It is worth considering that the side walls usually have legs - you can easily orient the parts along them.

Clearly determine where the top and bottom of the crib are. The main part will be the back wall - it is better to place it on the floor, with the inside facing up. You need to insert the remaining parts into the puzzles for fastenings and connect the crib body completely. After this, it is necessary to tighten all the screws, check the structure for stability and then install it vertically.

Once the crib is installed, you can begin installing the bed. First you need to try on how the bed will be installed. After this, you need to try on the moving elements. After this, once all the details of the fastenings have been checked and taken into account, the stock can be installed.

It is better not to install the stock right away, but to try on several options with moving elements. Then mistakes can be avoided.

After the bed is installed, you can turn the crib upside down and begin installing the pendulum mechanism if it is attached from below. If the swing mechanism is presented in the form of a cradle, then it is attached to the sides from above. Then there is no need to turn the crib over.

The pendulum mechanism itself is installed in accordance with the instructions. After installing the pendulum, drawers, a changing table and other additional elements should be secured.

All additional elements are fixed after assembling the pendulum.

The pendulum mechanism cannot be attached before the stock is installed.

Since the stock acts as the main element of the structure and ensures its stability. Otherwise, the frame of the crib will begin to wobble, which will make it inconvenient to place such a large element into it.

After installing the last parts, be sure to check the structure for strength. After the device is assembled, you need to check its reliability. To do this, you need to set the crib in different modes, try to rock it and put a little pressure on it. If everything is in order, then you can lay out the mattress, linen and settle the baby.

You can place your baby in the crib only after you have made sure that everything is assembled correctly.

Assembly steps depending on the type of crib

Installation features completely depend on the type of furniture. The most popular designs of cribs today are pendulum, transformer, rocking chair, and hinged models. Next, we will look at the step-by-step process of assembling each of these types.

Pendulum

The main feature of the model is its special oscillatory movements, which are very similar to rocking a baby in the mother’s arms. The mechanism starts on its own at the slightest movements of the baby, which helps him fall asleep quickly.

There are several types of pendulum:

Longitudinal. The most popular option, perfectly imitates motion sickness. Scientific studies prove that such movements normalize intracranial pressure.
Transverse. The shape of the products resembles traditional cradles, rocking from side to side. If necessary, you can fix the model in a stationary position. Assembling a children's pendulum bed of this type is also possible in small rooms.
Universal. Models are able to change the direction of motion sickness and purpose. At first, babies sleep in a cradle, and when they grow a little, the sleeping place is lengthened and the walls are removed. Many products are complemented by a convenient changing table.

The back part is connected to the side strips using screws.
The berth is first mounted on screws, then on guides located on the sides.
The structure is turned over to install the pendulum mechanism.
Linen boxes are inserted, the side wall of the pendulum is fixed with screws.
All plugs are closed.

The back and front walls of the structure are almost identical. It is necessary to pay close attention to this feature when assembling a children's pendulum bed. If you mix them up, the mechanism will not work. To avoid damaging the floor covering and parts of the furniture itself during the assembly process, cover the work surface with a soft cloth. It is desirable that it be light, then all components will be clearly visible.

Connect the back wall with the sides Install the bottom of the crib Insert the front wall of the crib and pull it together with the sides Install the runners for the box, fix the legs Install the pendulum mechanism Check for the presence of a screw for fixing the crib Assemble the box

Transformable bed

This model is optimal for baby sleep from birth to school age. Installation is carried out as follows:

The lower sides and backs are connected.
The fixed wall is secured with screws.
The bed is assembled, then inserted into the grooves on the side panels and secured with screws.
A fixed façade wall is installed.
The cabinet is mounted and then connected to the side.
The bottom of the product is assembled, and the side grilles are attached.

The transformer grows as the child grows. The cabinet, which is attached to the base of the furniture, can be removed, adding 50 cm to the length. The standard width is 60 cm, it remains unchanged.

Rocking chair

A popular model that sways with the child’s movements thanks to curved supports. Installing such a crib will not take much time if you follow the rules:

All boxes are assembled using self-tapping screws.
The bottom and side panels are mounted. At this stage you will have to make some physical effort.
The back wall is screwed to each side panel with self-tapping screws.
The front model is installed in the grooves on the side panels and securely fastened.
The lower linen drawer is installed.

Many models are complemented by wheels, which are mounted at the request of parents.

Hinged

The cribs provide monotonous, smooth rocking motions that help children fall asleep quickly. The sleeping place usually has two levels and has orthopedic properties. The assembly rules are:

The base of the product is mounted. All 3 guides are attached to the bottom of the case.
The front and rear backrests are secured with screws.
The bottom is installed, two installation options are possible, which allows you to change the depth of the crib.
The side walls are screwed on, all moving parts are connected to the base.

If necessary, the rocking chair can be in a stationary position; for this purpose, special clamps located at the bottom of the side panels are used.

What do you need?

How to assemble a transforming crib? Some people prefer to turn to specialists. Indeed, a master will be able to do this much better, since this work is quite labor-intensive.

After purchasing a rectangular or round transformable crib, you must read the instructions. It is there that there is a detailed description that allows you to understand the nuances of the work. You will also need a screwdriver and the desire to perform the procedure.

Models for babies

The most popular models for newborns are round and classic rectangular cribs

Classic models, due to their popularity, are made from different types of wood, painted in a variety of colors and are presented in a variety of price categories. Therefore, it is very easy to choose a model that is suitable in appearance, functionality and price.

Things are much more complicated with the choice of a round or oval crib. Typically, the functionality of oval and rectangular cribs is the same, but their prices are much higher. This circumstance usually scares away young mothers and fathers.

Despite the apparent complexity of the design, making such a crib is not so difficult. Just look at the photo of how to make an oval-shaped crib to understand its structure.

Check it out here too!

Designer furniture in the interior: photos, new items, ideas for placement and combinations
How to make a chair with your own hands? Stylish ideas, drawings, design options, descriptions and beautiful homemade models (video + 105 photos)
Instructions on how to make a computer desk with your own hands: drawings, projects and ways to build a modern, functional and comfortable computer desk (125 photos and videos)

Photo of a round transformable crib 8 in 1

Photos with sides and canopy

Photo with a child

We determine the overall dimensions and draw up a drawing

The starting point is the crib mattress, or rather its dimensions. Spare no expense and buy your baby a high-quality mattress with a “complex filling” made of coconut fiber with layers of latex. The usual size of a children's mattress is 1200 x 600 mm. You will find out what other children's mattresses there are from the table below.

Spring mattress

Springless mattress

Latex and coconut fiber mattress

Cotton wool mattress

Foam mattress

Polyurethane foam mattress

The dimensions of the mattress are fundamental to determining the size of the crib. The height of the bed from the floor should be such that an older baby can climb into the crib on his own. It is recommended to make it equal to 350 mm.

The distance between the lattice and the solid wall of the crib is 12 mm, and between the rods - no more than 9 mm. Such indicators guarantee the safety of the baby. Based on these points, you can prepare a schematic drawing, which will make it much easier to work with.

Types and advantages of pendulums

There are several types of beds for children, they differ in the direction of movement of the furniture itself. For worried parents, it is worth noting that thanks to a special wooden mechanism on a hinge and a limiting sleeve - a special spare part - motion sickness will not occur, nothing will disturb the baby's sleep. Three options: with a longitudinal pendulum, with a transverse pendulum and a universal bed.

The first option is considered the most common and popular, because only thanks to the longitudinal pendulum is the natural swing of the mother transmitted. The child has the feeling that he is being calmed by his own mother, holding him in her arms. According to pediatricians, thanks to this, the child is guaranteed to have normal intracranial pressure, and therefore no headaches in the future.

Models with a transverse pendulum are reminiscent of the cradles in which our ancestors rocked their children. Like the old version, modern cribs move from side to side. This type of furniture is perfect for families with a small bedroom due to the fact that, thanks to the transverse pendulum, the furniture takes up little space. Special clamps will help stop the movement of the crib.

Universal models not only allow you to change the swing direction, but can also change their functionality. When the child grows up, the wooden walls can be removed and the bed itself can be lengthened using a chest of drawers. Sometimes manufacturers include a changing table, which is incredibly convenient for mothers. And while the child is still in infancy, parents do not need to put in much effort to return the crib to the standard position or change the direction of rocking.

Types of children's beds

Furniture of this type is divided into ordinary and multifunctional: a transforming crib, a pendulum crib, with drawers, with a chest of drawers, with a changing table, with wheels and a rocking crib. The main ones will be discussed in detail below:

Transformable children's bed. It combines several elements and is suitable for a long period of time. One of its functions is transformation from a cradle to a sleeping place for an older child. Part of such furniture includes attributes for the convenience of caring for a newborn - drawers or a chest of drawers. They can also serve as a place to store toys and things for an older child. Manufacturers most often equip such cribs with a rocking mechanism, music and lighting. The disadvantages are the high price.
Pendulum. It has a convenient design and takes up little space. It is divided into several types - according to the mechanism of motion sickness. The advantage of the longitudinal mechanism is the similarity of its vibrations to the natural movements during motion sickness. A baby in such a crib should calm down and fall asleep faster. The transverse pendulum moves left and right, but, according to some reviews, not all children like this method of motion sickness. In order not to make a mistake in choosing, it is best to purchase a universal mechanism. In this case, if your baby does not like the type of rocking, you can change it to another. Many models have the function of changing the height of the bottom of the bed. They can be equipped with electronic controls and removable walls, which is very convenient for mothers who want to place their child’s bed next to their own.
Rocking bed. In terms of functionality, it is no different from a pendulum cradle, only it does not have automatic functions. This type of furniture is more environmentally friendly compared to other types.

Where can I put the bed

Usually the crib is installed first in the parent's bedroom. This makes it more convenient to sleep and look after the baby. In this case, it is important to position the crib so that its long side is next to the wall, and one side remains open. This will allow you to approach the child from the most comfortable side.

It is important to place the side wall at the head of the room against the wall, curtains or closet. This way there will be no access to the child from this side, thanks to this he will feel safe and will not roll his eyes to see the space behind him.

While the child is small, the crib is often placed in the parent's bedroom and one side is left open. As the child grows, the crib can be moved to his or her nursery. This will make moving to another space more comfortable for the baby. After all, his cozy house will remain with him.

Possible mistakes

Some dads try to save on everything and make mistakes when designing or building a crib, which will affect their children in the future. Here is a list of the most common mistakes that should not be made:

Use old building materials. This applies to both wood and fasteners. Old wood may contain mold, mildew and other dangerous microflora. A small child will quickly catch the infection, and parents will wonder what happened to him.
Do not treat wooden surfaces. There is an opinion that clean wood is much more environmentally friendly and safer. This is only partly true. The child can easily chew the board when his first teeth appear. At the same time, he can injure the oral cavity with broken wood chips or shavings. Don’t be lazy and save on wood processing, otherwise you’ll have to treat your child for a long time.
Do not make calculations and drawings without experience in this field. Construction in a hurry is only permissible for experienced master carpenters with extensive experience. One miscalculation can ruin the entire project!

Below you can see photos of cribs and cradles for babies:

Tips for the master

The description of how to assemble a pendulum crib, instructions and photos may vary depending on the model of purchase. Carefully read the manufacturer's instructions included in the package.
It is better to assemble the crib in the bedroom or nursery and not move it to other parts of the apartment.
Keep the crib clean: remove dust and dirt regularly using water and a mild hypoallergenic detergent, laundry soap is suitable.
If you find parts missing, consider ordering additional parts from the furniture manufacturer's website.
It is better to assemble the crib the day before the baby arrives at home. Make sure that everything is ready for the arrival of the little man.

It is necessary to choose the right mattress for a crib

You need to choose a place for a baby cot

The crib must match the interior of the nursery

A pendulum crib, carefully assembled for the long-awaited baby with your own hands, tested for safety and reliability, will be an excellent place for your baby to relax and develop. In a nursery or bedroom it will become the center of attraction for parents and guests. In order for the crib to be a cozy nest and interior decoration, it is not necessary to call a professional furniture assembler. Thanks to the description of how to assemble a pendulum crib (instructions, photos), you yourself can easily achieve your intended goal.

Baby cot-cradle with pendulum mechanism of transverse swing

Wooden crib with pendulum mechanism

Pendulum crib: caring for the baby and his parents

A crib with a pendulum system, unlike other models, is equipped with a mechanism for rocking the child to sleep. This function will be of great help to the parents of the newborn in the first months of his life at home. This option is preferable when mom and dad deliberately decided not to accustom the baby to rocking in their arms or the parents have health problems. In addition, young mothers get tired of having to go to the crib at night every time the child wakes up. Here a pendulum crib comes to the rescue of parents. All you have to do is push the smart design with your hand and it will begin to sway rhythmically, putting the restless baby to sleep.

Pendulum crib with drawers

Pendulum crib with chest of drawers and drawers

The indisputable advantage of the pendulum is the sensitivity of the mechanism to light touches, thanks to which the baby can set the crib in motion. This will ensure a good night for the baby and allow the mother to rest.

The mechanism for setting the pendulum in the crib in motion

It should be noted that, if necessary, it is quite easy to make a pendulum crib into a traditional stationary crib. You only need to lock the system with clamps, which, as a rule, come with the furniture.

Among the additional functions of some models, it should be noted the ability to adjust the height of the bed of the crib and the front wall, drawers for linen, and soft sides. The best option is a design with three levels of bottom height, which can be used in accordance with the growth and development of the baby. The front wall can be not only retractable, but also completely removable. This will allow you to move the baby crib closer to the parent's bed, then the baby will smell the mother's scent, who can quickly feed him and put him to bed. The laundry drawer will allow the mother to quickly change diapers and baby clothes, in addition, you can store toys or a first aid kit there. It is necessary to provide free space in the room for pulling out the linen drawers of the crib. Fabric sides not only play an aesthetic role, but also keep the baby safe.

The height of the pendulum crib can be adjusted

Sources

https://kakchistim.ru/mebel/instrukcii-i-sxemy-po-sborke-detskix-krovatok.html
https://babyplayroom.ru/mebel/sborka-detskoj-krovatki-s-mayatnikom.html
https://weller.ru/svoimi-rukami/kak-sobrat-detskuyu-krovatku-mayatnik-instrukciya/
https://mblx.ru/kojka/malysh/1005-kak-sobrat-detskuu-krovat.html
https://severdv.ru/mebel/krovati/instrukcziya-po-sborke-krovati-transformera/
https://otvali.ru/master-klassy/kak-sobrat-detskuyu-krovatku-mayatnik-instrukciya-foto/
https://FB.ru/article/442621/kak-sobrat-detskuyu-krovatku-s-mayatnikom-instruktsiya-i-rekomendatsii
https://berkem.ru/krovati/sobiraem-krovatku-dlya-malysha/

General rules for choosing cribs

For many mothers and fathers, the decisive factor when buying children's furniture is visual appeal, however, this approach is fundamentally wrong. The main selection criteria are the convenience and safety of the little man. There are many things to consider when choosing a crib, including:

material of manufacture;
baby protection elements;
features of the sleeping place arrangement.

Shapes, materials and sizes of frames

One of the main structural elements of a crib is the frame. Today, furniture manufacturers offer a huge selection of cribs for newborns; the range includes traditional rectangular models and somewhat non-standard products with a round or oval frame.

The strength and durability of a crib directly depends on the material used. In the production of furniture for small children, natural wood, MDF, plastic, laminated chipboard, and metal are used.

Of course, for a baby it is better to choose a crib made of natural material. Furniture with a wooden frame looks expensive and presentable, is characterized by a long service life and the ability to “breathe”. In the segment of wooden children's furniture today you can find quite affordable models; budget options include products made from pine, spruce and birch. More durable, expensive cribs are made from hard trees - beech, ash, oak. Wooden cribs vary in style and design. The market offers classic models made from unpainted wood and wooden cribs coated with paint and varnish, decorated with printed images.

Plastic frames are easy to maintain; the weight of a plastic crib is much less than its wooden counterpart. The affordable cost of plastic furniture also attracts buyers.

Metal frames are famous for their strength and long service life. However, metal cribs are not widely used due to the “coldness” of the material.

Sides - types and rules of choice

Another important element is the sides of the crib; the main purpose of the design is to protect the baby from falling. The sides can be:

stationary and removable;
blind rack or combined (two solid sidewalls, two rack).

Most often, furniture manufacturers make the side walls of the sleeping bed in the form of a lattice structure; the side walls consist of a frame and cross bars installed at a certain distance. The crossbars can be made in the form of a round rod or be represented by wide slats.

When choosing a sleeping place for a baby, it is important to take into account two main requirements for enclosing structures:

the distance between the vertical slats of the side parts should not exceed 5-6 cm;
The height of the sides should be at least 60-65 cm, measurements are taken from the mattress to the edge of the side.

Additional protection for the baby will be provided by special silicone pads on the edges of the side and soft removable sides fixed around the perimeter of the crib. Elements of protection are especially relevant when the baby begins to actively move and during the period of teething. Silicone pads will not only protect the child’s gums from damage, but also maintain the integrity of the tree.

Some models of cribs are equipped with a front folding side. The folding sidewall allows you to move the child's bed close to the parent's bed; when the child grows up, he will be able to independently climb into his sleeping place. Unlike cribs equipped with runners to adjust the height of the side, folding designs use piano hinges. If necessary, the side can be folded down to the outer side and, when raised, is secured with latches.

Sleeping place - types and arrangement of bases

The base for the mattress of a baby crib can have a solid covered or slatted bottom. A solid bottom is considered more durable, and the cost of cribs with a solid base is lower than their slatted counterparts. A significant drawback lies in the design features; the solid base does not have gaps or holes, and therefore there is no air circulation between the mattress and the bottom. The mattress does not dry well and can quickly become unusable.

The slatted bottom consists of transverse strips fixed to the frame. The lattice design does not retain moisture inside the mattress and provides intense air circulation. The slatted base helps to properly distribute the load on the baby’s fragile spine.

Transformer

The transformer option is suitable for children of different ages: from a one-year-old baby to a seven-year-old schoolchild.

The assembly process consists of several sequential stages:

The first to assemble is the frame, which includes the back and lower sides . Afterwards, the base of the slats is installed;
bottom is fixed to the lower base of slats ;
Next, you need to assemble, depending on the configuration, a chest of drawers or a cabinet. Fixation occurs using screws to the rear side of the structure;
Grilles or limiters are mounted on the sides, headboard, and upper bottom;
Having completely assembled the upper part, you can begin installing the lower part. It is also attached using screws .

The choice of a crib should be taken seriously. The market offers a huge range of different types and price categories. Before purchasing, it is advisable to study the available options and compare them with your requirements and financial capabilities.

How to make a pendulum for a crib with your own hands?

Let's figure out how to make a pendulum for a crib with your own hands. For these purposes you will need:

Installation diagram of the pendulum mechanism.

bearings, the outer diametrical size of which corresponds to 3.5 cm. The required quantity is 8 pieces;
metal bushings with 6 threads. You will also need 8 of them. You can buy these at any market that specializes in selling furniture fittings;
countersunk head screws. With their help the pendulum will be attached. Need 8 pieces;
strips - 4 pieces. Elements of parquet made of oak (planks) are suitable;
washers in the amount of 8 pieces. The most appropriate choice would be to use plastic copies. They will be needed in order to avoid friction of the bed legs when in contact with the supporting structure;
In addition to purchased ready-made materials, you will need metal bushings (8 pieces), which should be pressed quite tightly into the bearings, or rather into their inner hole. Such bushings are made only to order.

( 1 rating, average 4 out of 5 )

Main types of baby cradles

A special cradle for the baby is placed in a suspended state so that it can be easily rocked.

Classic woven version made of 100% cotton and wicker twigs

This design can be of several types:

The classic version of the cradle is usually made of natural wood using weaving techniques. Also, such a cradle can be decorated with forged elements. Two cross arches securely hold the cradle, but at the same time do not interfere with rocking.
Swing cradle. This product really resembles an ordinary swing, because the sleeping place for the baby is fixed on two supports.
Automatic cradle. To rock your baby comfortably, you don’t need to make any effort; just press one button. Additionally, such designs can have various accessories - lighting, musical accompaniment, the ability to change the tempo and direction of rocking of the cradle.
Round crib swing. Mobile and compact. The best assistant for a young mother.

Each mother will be able to find the most suitable option that will match the interior of the room, taste preferences and financial capabilities.

We also recommend that you find out which diapers are best for newborns.

Elegant swing cradle

What to look for when choosing

There are a few important points to consider before purchasing:

To choose a truly high-quality and safe cradle, you need to carefully study the mechanism of the product

Pay special attention to the reliability and strength of the main fastenings, because the safety of the newborn will depend on them. All fasteners must be made of metal, but in no case plastic or wood. The cradle is designed to quickly rock a small child

This product usually has standard sizes. However, if you want your baby to be comfortable while resting, choose a product with the maximum width of the cradle. Then the child will be able to easily roll over during sleep. Additional functionality. Some products can be equipped with a basket for small items, a folding changing table and other additions. When buying a cradle, you must take into account one rule - the more additional accessories the product contains, the higher its cost. The material from which the cradle is made must be natural and environmentally friendly. This product will retain its attractive appearance for a long time and will not cause allegra in a newborn.

When choosing a wooden suspended structure, ensure the increased reliability of the fastenings

The most useful accessories

Anyone can purchase a ready-made cradle with a full set of all kinds of accessories. However, some young parents want to save money and buy only a cradle, without any additions.

In this case, you will need to purchase the necessary accessories separately:

A baby's cradle mattress is the most important accessory. The baby's comfortable sleep depends on its quality. Choose a product of the appropriate size; to do this, you need to measure the cradle in advance. Experts recommend giving preference to mattresses made from coconut coir. Bed linen made from natural material – cotton is best. It should also be the right size. A special cover for the cradle creates a comfortable atmosphere for the newborn and protects from bright light. The lock prevents the cradle from swinging too much. Rubberized wheels for support are necessary for silent movement of the cradle around the apartment

It is these parts that most often break, so it is recommended to pay special attention to the quality of the material from which they are made.

A felt crib is suitable for winter as it retains heat well

Preparatory stage of installation

Although the design of a children's pendulum bed is somewhat different from a transforming model, rocking chair or children's furniture on hinges, the assembly process of any of these products consists of two stages: preparation and installation work. To create comfortable working conditions and improve its quality, you will first need:

Remove unnecessary things from the nursery, move furniture, freeing up the space necessary for ease of installation. Correctly carry out the assembly in the room where the crib will subsequently stand, in which case there will be no need to drag it to another room after completion of the work.
Carefully examine the available components. Their quantity must correspond to the data reflected in the instructions. If a shortage is discovered, you must immediately call the store and report it.
Make sure there are no defects. To do this, all furniture elements are carefully inspected for their integrity. If chips or cracks are found, it is better to issue a return, as this threatens the safety of the child.
Sort the components. All walls, planks, sidewalls, as well as fittings are assembled into separate groups, based on their shape and size.

Each point described in the instructions for assembling a children's bed must be strictly followed. A certain model has its own characteristics, so its installation does not always comply with the basic rules. It is always recommended to start by connecting the largest elements.

Assemble the crib in the room where it will subsequently be located

Follow the instructions strictly

Group components

Check components for defects