Tips on how to dye clothes at home

Many people have favorite jeans. The only problem is that sooner or later they lose their color. Jeans wear out, become faded and unattractive to the point that they are no longer suitable for everyday use.

But jeans can be updated: dye them in dark shades or give them a bright color. Denim absorbs dye well and, due to its durable structure, can be re-dyed several times.

Methods of application

The choice of coloring agents is quite diverse, each of them has its own nuances in application: some come with a fixative, others do not.
You must apply the paint strictly following the instructions, otherwise you may end up with either a poorly painted product or a completely damaged one. Before you begin the process of “reviving” the color, the jeans need to be washed well, but without using conditioner, and dried

When painting, it is important to pay special attention to the areas that are subject to the most rubbing, so check how the original paint looks on your knees

Step-by-step instruction

Dyeing a denim item in black or any other color begins with studying the information indicated on the packaging of the dye. At home, it is most convenient to use a washing machine. The step-by-step staining process is as follows:

the pockets of the product are checked for contents; everything must be taken out;
study the jeans tag, it should indicate the washing temperature at which they can be washed;
turn the product inside out and place it in the drum of the washing machine;
the denim product must be sprinkled with dye in the required amount on top;
The washing machine is set to a washing mode without rinsing;
after turning off the machine, take out the jeans and rinse them in a weak vinegar solution (1 tablespoon of vinegar is added to 1 liter of water);
Next, the jeans are re-loaded into the machine, but they need to be washed with the addition of powder for colored fabrics. The washing mode is set to normal, i.e. with rinse and spin;
The clean and freshly painted product is dried naturally.

The step of rinsing the product in vinegar water is only needed if the paint does not contain a color fixer.

Some dyes are loaded into the drum along with the packaging; there is no need to pour anything out.

The paint is absolutely safe for both denim and the washing machine. After the first rinse, no dye remains on the drum and even white items can be washed.

Video: how to dye jeans black?

Adding blue shades

There are also several methods for dyeing pants blue.

First of all, the use of ordinary blue - a mixture of methylene blue with starch. It is suitable for refreshing the product and giving it a more saturated color.

Manual method

The dye is diluted in the amount of warm water indicated on the package, add a couple of tablespoons of table salt .
Pants are placed in the resulting mixture. It is recommended to leave the product for several hours to obtain a bright and rich shade.
Turn over about once every 2 hours to ensure even coloring.
Before completing the process, you can prepare a solution with vinegar. Add 2 tablespoons of vinegar per liter of water . It is necessary to soak the painted product in the resulting solution for several minutes to consolidate the result. Then rinse several times.

Machine method

When painting in a machine, powder dye is more suitable . It is diluted with boiling water and poured directly into the drum .
Next come the trousers . It is recommended to set the mode to “Boiling”.
While the product is going through the stages of dyeing, prepare a solution with vinegar . must be kept in it for at least 15 minutes.
Afterwards rinse with water .

These steps will help restore your trousers’ rich color and well-groomed appearance.

Steps

Part 1 of 3:

Preparing jeans for dyeing

1
Wash your jeans.
To ensure that there are no substances left on the jeans that you are going to dye that could interfere with the dyeing process, they must be washed first. Place them in the washing machine and wash as usual, following the care instructions on the jeans' sewn-in label. X Source of information
- There is no need to dry your jeans after washing. They must be wet before bleaching or dyeing.

Part 2 of 3:

Preparing the Paint

Part 3 of 3:
Dyeing jeans
Read also: Schedule for washing household items and clothes - we find out what is better not to wash often
1
Press out any wrinkles on your jeans.
Jeans should be wet after washing. Before putting the jeans into the pan, squeeze them out again to make sure there is no excess moisture left in them. Then straighten the jeans so that when you dip them into the dye, there are as many wrinkles as possible. X Source of information
2
Place the jeans in the pan and stir them in the solution for a while.
Dip the straightened jeans into the paint pot. Using a large, long spoon, stir them for 30 minutes or until they are as black as you want them. X Source of information
- As you stir the jeans, move them back and forth, up and down. It is necessary to ensure that the dye evenly saturates the denim fabric.
3
Remove jeans from pan and rinse thoroughly until clean.
When you are happy with the results of dyeing your jeans black, remove the pan from the stove and transfer the jeans to the sink. Rinse them in the sink with warm water. Gradually start making the water colder until all the excess paint is washed away and the water runs completely clear. X Source of information
Some dyes may come with a dye fixative for cotton fabrics to prevent fading. It can be used to treat jeans immediately after dyeing in accordance with the manufacturer's instructions provided.
4
Hand wash your jeans.
After dyeing your jeans, hand wash them directly in the sink. Use warm water and liquid detergent for hand washing. Then rinse your jeans with cool water. X Source of information
If you want, you can wash your jeans in the washing machine along with an old towel. The towel will absorb any excess paint that comes off the jeans.

The first few times you machine wash and dry your jeans, be sure to add an old towel or other dark item to them in case the dye continues to wash out. To prevent paint from fading, use cold or warm water and a gentle liquid detergent.
It is obvious that textile paint leaves behind stains on fabric surfaces. For work, wear old clothes that you don’t mind getting dirty during the process of dyeing jeans, and also protect your hands with rubber gloves. Clear your workspace of textile items, including towels, rugs and curtains.

Be careful when wearing freshly dyed jeans. They can leave marks on light-colored upholstered furniture, even after the paint has set. Be sure to rinse them thoroughly after dyeing.
Even after several dyeing procedures, the jeans will not become as deep black as store-bought black jeans. Be realistic in your expectations.

Washing machine
Machine washable detergent
Large stainless steel saucepan
Big long spoon
Water
Latex gloves
Bleaching agent
Jeans
Disposable polyethylene tablecloths
Liquid or powder black paint for textiles
Salt
A piece of cloth or paper to test the dye
Liquid detergent for hand washing

Is it possible to dye a Bolognese jacket?

Before painting the jacket, it must be soaked in hot water. This is necessary to ensure that the paint is evenly distributed throughout the product. You can soak it in the bathtub or in a basin. After this, take out the jacket and smooth out all the creases so that the paint adheres correctly. Heat water in a large saucepan; there should be enough water to completely cover the item.

Important! The jacket should float in the water so that the pigment is evenly absorbed. It is advisable to choose a very large pan

Over medium heat, boil water. Next, pour water into a large basin and put the jacket there.

Painting a nightgown

The water temperature should be approximately 70 degrees. Add paint to boiling water and stir quickly. One package of pigment requires at least 10 liters of liquid. For a less vibrant color, less water is needed. The paint is dissolved in a separate container. Pour 250 ml of boiling water over the powder packet and stir. Even liquid dyes are first diluted with water. To make the color more saturated, you can add a spoonful of vinegar to the water. Dye the jacket for about 2 hours.

How to paint a product yourself

Textile paint is available in the following forms:

It is suitable for use when dyeing by hand or in a washing machine. The choice of dye depends on the composition of the fabric and the personal preferences of the owner of the clothing.

Before starting work, it is necessary to accurately determine the composition of the product. If the label is erased or lost and it is not possible to find out reliable information about the composition, you can set fire to the thread from the product. Synthetic and natural fibers release different “flavors” when burned:

synthetics smell like chemicals;
natural wool or cotton emits the smell of burnt hair.

The easiest way to repaint a thing is from natural materials. Synthetics are difficult to paint and quickly lose their newly acquired shade.

The general rules for using universal fabric paint are the same regardless of the manufacturer of the product. However, when starting coloring, it would be useful to study the instructions included with the product in order to know exactly the dosage and nuances of using a particular dye.

Important! All work with the dye must be carried out with rubber gloves. If the dye does not require heating the water, then it is better to carry out the work in the bathroom, having previously protected easily soiled items with a waterproof film

Then the following activities are carried out:

If the dye does not require heating the water, then it is better to carry out the work in the bathroom, having previously protected easily soiled items with waterproof film. Then the following activities are carried out:

Pour paint into a container with warm water and stir thoroughly. The amount of water and dye is determined in advance depending on the weight of the clothing and the dosage indicated by the manufacturer on the packaging.
The product is dipped into the solution and left for half an hour, stirring occasionally and making sure that the fabric does not wrinkle.
As soon as the product acquires an intense black color, it can be removed from the solution and rinsed in cool water, adding 1 tbsp. l. vinegar.

Important! If you need to paint several things, you need to paint them one by one. Often the instructions require heating the coloring solution, then proceed as follows:

Often the instructions require heating the coloring solution, then proceed as follows:

The container with paint dissolved in water is placed on low heat and heated to a temperature of 60 °C.

Important! When dyeing wool and silk, add 50 ml of 25% vinegar essence to the solution

The item prepared for painting is immersed in a hot solution for an hour, maintaining a constant temperature of no more than 60 ° C and stirring occasionally.
After the allotted time has passed, the product is washed in a machine or by hand at a water temperature of 40 ° C and rinsed with the addition of vinegar.

In the future, you should wash and rinse items painted black separately from the rest of your clothes, and add vinegar to each rinse.

How to choose paint

Compound. Before purchasing, you need to pay attention to whether the ingredients of the product are listed on the label. In the production of counterfeit paints and compositions that are produced in artisanal conditions, important information is often missing, including the types of main components. In addition, the composition allows you to determine how high-quality and effective the chosen product is. Thus, it is recommended to purchase a helmet that does not contain lavsan and niton. These components can ruin the item because they contribute to its uneven coloring.
Material type. The label indicates for which fabrics the composition is intended. If the wrong product is used, the material may be colored unevenly or may result in a color that is not what was expected, such as a lighter color. There is another danger: the material will be colored, but after the first wash it will begin to fade a lot.
Type of paint. The compositions differ in structure, which determines their properties. The choice is made taking into account the method of application of the pigment. This is due to the fact that each type of paint is designed to paint products under given conditions. When the requirements for the procedure are not met, the quality of the painting deteriorates.
Application of universal compositions. In the absence of information about the type of material, it is permissible to use a product that is suitable for dyeing cotton, linen, wool, silk, and viscose fabrics. In this case, the color can be preserved for a shorter period than in the case when a highly specialized composition is selected.
Best before date. It is not recommended to use products that have lost their properties.

Is it possible to dye jeans blue?

Water-soluble and water-insoluble dyes can be used as a blue for dyeing jeans. These can be liquid or powder.

It could be:

Prussian blue;
indigo carmine;
Paris blue;
ultramarine;
anilic dyes.

All these types of dyes can be used when dyeing jeans, you just need to take into account some of the characteristics of the dyes. For example, Prussian blue can only dissolve in water together with oxalic acid. Anil dyes become discolored in the sun, some of them acquire a reddish color when ironed. Ultramarine is quite cheap, but it does not dissolve. Insoluble paints stain fabric worse and are more difficult to work with. There may be difficulties due to uneven dyeing, especially on heavy items: insoluble crystals can stain clothing in the form of stains.

It should be taken into account that if there is embroidery on jeans, it will inevitably deteriorate and turn blue. The item will look washed out and untidy, and bright embroidery threads will have a dirty effect.

Denim items in shades other than blue cannot be dyed blue. Blue and light blue shades that need to be refreshed or re-tinted can be used. It is acceptable to dye white and light gray jeans, which will turn blue when used with bluing. The final shade will in any case depend on the original color.

What fabrics can be dyed

Natural fabrics are easier to dye than synthetics. Cotton, linen, silk, and wool absorb pigments well, but artificial fabrics cannot be dyed evenly.

Items with sequins, beads, inserts or embroidery may look sloppy after dyeing. Therefore, before the procedure, all accessories are stripped from clothing, since metal, plastic and wood react to dyes.

Light fabrics can be given any shade, dark fabrics can only be given more intensity. If you are going to repaint a black item, you first need to bleach it and only then paint it.

If things often shed during washing, you may not be caring for them correctly. To keep your favorite clothes looking longer, take them to the dry cleaner: specialists will select effective cleaners that will not spoil the color of the fabric.

How to dye jeans at home

Various means allow you to dye jeans in almost any color. The dyeing process is as simple as possible; even someone who has never dyed fabric can handle it.

How to paint jeans with powder paint or other means

Choose a product depending on what color you want to get.

Blue. Almost all housewives have it in their arsenal. Updates the blue color of jeans. Not very durable, you will have to periodically dye your jeans again.
Potassium permanganate. You need to work with it carefully, otherwise you risk severely staining your hands, your pelvis, and your bathtub. However, potassium permanganate will help you create stylish “washed” jeans that are always in fashion.
Aniline dyes. The easiest option to use. They are not very durable.
Powder paints. Also very easy to use, and also very durable. The downside is the small selection of colors.
Acrylic paints. They are a little more difficult to use, but there are a lot of color options. Acrylic is absolutely not afraid of washing; jeans can fade only if you decide to boil them.

The described paints can be purchased at fabric stores. They're relatively inexpensive, so you can update your favorite jeans at minimal cost.

Types of Dyes

Retail outlets offer a variety of dyes for shoes and clothing. Fabric paint is sold in various forms. We’ll look at how to dye fabric with brilliant green or other dyes below. The most popular fabric paint:

acrylic
aniline
stamped
plastisol
natural

Acrylic paints

The most popular water-based fabric dye is safe for human life and health. Easy to use, does not wash out after dyeing. After painting, it is better to wash products at a temperature of no more than 35 C.

Aniline dyes

They are painted at a temperature of about 95 C, fixing the color by adding salt. For cotton, soda is also added, and for wool, vinegar is added. The product may fade for some time. The technique is called “batik”. In the “gradient” technique, the material is lowered in parts, resulting in coloring of varying intensities. If you squeeze too hard after painting, you will get streaks.

Stamp inks

With their help, hospitals, hotels and other government institutions label bed linen, towels, and bedspreads. They have different compositions, which depend on their application.

Plastisol paints

They are applied to outerwear, shoes and accessories as it has the property of reflecting light in the dark or under the influence of ultraviolet radiation.

Natural paints

Before chemical dyes began to be produced, natural dyes were used. They are less durable and the intended color is not always obtained. But they are hypoallergenic and suitable for people with sensitive skin and allergic diseases. There are many natural coloring substances known: turmeric, onion peel, orange peel, blueberries, blackberries, beets. A sufficient amount of paint is added to the water, the item is placed in it, heated to 60 C, and the procedure lasts up to 40 minutes.

Preparing for painting

Before you start work, you need to prepare everything you need, namely:

things intended for dyeing;
container and devices for turning fabric;
dyes and rinses.

Selecting containers and equipment for coloring

Once the clothes are prepared for dyeing, you can begin choosing a container.

Any clean utensil will do, be it an enamel basin or an aluminum pan.

The main thing is that there are no traces of scale or soot on the inner surface of the metal. Particular attention should be paid to the size of the container. The pan should be of such a volume that the thing to be painted is located freely in the solution, does not squash and does not rise above the surface of the water.

To stir and turn the product while working, you will need wooden tongs. If you don’t have such a device on your farm, you can use ordinary wooden sticks, after first clearing the surface of knots and uneven surfaces.

It is better to take soft water for the procedure, for example, rain or melt water. If this is not possible, then ordinary tap water can be softened with baking soda, for which 1 tbsp. l. powder is dissolved in 10 liters of water.

Painting stages

When everything is ready, we move on to painting the products. Following the instructions, pour the dye into a small bowl. Add water gradually, stirring the paint thoroughly until it is completely dissolved. Now strain the dye solution and pour it into the container in which the product will be dyed. Dilute the paint with water until it completely covers the item.

Place the container on the stove. Now you can immerse the product in the dye. To obtain a uniform color, rotate the fabric in a circle using a spatula or sticks. You need to remove the product when it becomes darker in color than you want. The fabric will lighten as it dries. To get streaks, the product must be twisted, as if wrung out, and secured with rubber rings.

Rinse the painted material well in water. After the last rinse, the water should remain clean. The better you rinse the fabric, the less it will shed during subsequent washes. Do not dry painted items in the sun or near a stove.

How to dye things with natural dyes

Miss Clean magazine recommends adhering to the following rules when dyeing using natural products:

Test the natural product on a small piece of fabric before painting.
Fill the selected raw material with water in a ratio of 1:2. Place on the stove, bring to a boil, then immediately remove. Now let the future dye brew. The longer the raw material is infused, the richer the color will be.
It is necessary to prepare the tissues by immersing them in a fixing solution. For berries: 0.5 cups of salt per 2 liters of water; for vegetables: vinegar + water in a ratio of 1:4.
Now things can be immersed in dye. Keep them until you get the desired shade. Remember that the fabric will become slightly lighter as it dries.
Dry fabrics on a hanger, this will help avoid streaks.

Selection of paint for jeans

Again and again we will repeat the golden rule about reading instructions. There are so many dyes sold that it would be pointless to describe each variety in detail - no one will ever remember it. A single misstep can transform your modest everyday jeans into a stage costume, or from college party king to an overgrown Ohio high school senior.

In order to somehow protect you from such unplanned transformations, let’s go over the basic principles of selection and types of paints to dye jeans blue at home.

Soluble or insoluble?

Simply put, powder or solution? If you are a lazy and undemanding person, the choice in favor of a ready-made liquid reagent is quite obvious for you. But it's not that simple. Coloring and coloring are different. Some people want to change the color of their jeans, others just want to freshen them up.

Manufacturers have learned to take this point into account and began to produce dyes intended for different purposes. It is generally accepted that:

liquid dyes for jeans are better for modest plans to restore the color at least a few washes back;
To completely change the color or add new shades to the color scheme of the pants, it is better to choose a powder dye composition for jeans.

Aniline dyes

At first glance, the simple procedure for dyeing fabrics, as you have seen, is full of many subtle nuances in which it is easy to get confused. How not to make a mistake with the shade, with the type of dye for jeans, with the method of heat treatment?

Help in choosing a shade are color tables, which are sometimes supplied with instructions for dyes. In them you can see how rich shades can be obtained at different concentrations of the active substance. But these are shades.

What about chemical formulas?

If you are not sure that you remember the school chemistry curriculum well, focus on aniline dyes. Aniline dye for jeans is not without reason considered the most popular and reliable.

The principle of action for dyeing jeans blue at home with aniline products is generally the same: boil and soak in a vinegar solution. There are just a few minor details:

table salt, which in other cases is added at the discretion of the owner, or in accordance with the instructions, is mandatory for aniline dyeing, otherwise the color will quickly disappear;
difficulties may arise with the dishes in which your jeans will be dyed: when cooking, you need to straighten them as much as possible, therefore, your dishes must be wide enough, and you will not be able to boil the bath;
You can play it safe by using a large wooden spoon or stick, stirring the solution itself.

Dillon

If aniline dyes for jeans are an enduring classic of the genre, then the universal product for tinting and washing denim “Dilon” is a newcomer that is confidently gaining popularity. The reason is clear: a product that is equally suitable for dyeing and washing, firstly, saves money and nerves, and secondly, it is much easier to use in practice.

Try it, use it and have fun. And remember the golden rule: if after dyeing the result is not at all what you expected, just tell yourself and your loved ones that everything was as planned and you wanted to dye your jeans at home exactly that blue color.

But we don’t say goodbye to you here, come back again!

With love, Stay tuned!

Types of dyes

Industrial production means:

powder compositions: paint is available in dry form, in powder form;
Ready-to-use liquid products are specially developed pigments intended for dyeing fabrics.

Use available tools:

refilling printer cartridges (black);
natural coffe;
tobacco ash.

These options are not recommended for improving the color of expensive items, since there is a high probability that the trousers will be irreparably damaged. There is no guarantee of a good result in this case.

How to dye black trousers in the washing machine?

Dyeing trousers in the washing machine is easy. The paint packaging details the painting steps, but if the instructions are in Chinese, English or another language, then it is unlikely to be useful. Let's look at the detailed dyeing of black trousers in the washing machine. To do this you need to do the following:

Before painting black trousers, you need to wash them in washing powder, using a stain remover, but under no circumstances use fabric softener. After washing, you can proceed to dyeing.

Put on rubber gloves and pour two to three packets of dye into a glass bowl. Then pour the dye with hot water - at least 2 glasses of water per 1 package of dye. Mix well with a metal spoon so that the paint is completely dissolved in the water. Then add 1 cup of coarse salt and mix well again.

The dye for dyeing black trousers must be completely dissolved in water.

Fill a basin with hot water, add a mixture of dye, salt and water, also add 1 glass of vinegar and 1 tablespoon of washing powder, mix thoroughly and pour the finished mixture into the washing machine.

Observe the concentration of dye, salt, vinegar and washing powder

Place wet jeans in the washing machine and set the wash cycle to no more than 30 minutes. When the wash is finished, take out the pants and rinse several times until the water runs clear and hang to dry.

To dye trousers in the washing machine, it is better to use a top load machine

Using a washing machine to dye black trousers can achieve long-lasting color and uniform dyeing.

Method - pour the solution into the washing machine

Straighten your jeans and turn them inside out. Don't forget to empty your pockets!

It is better to use a temperature setting for washing of 90-95 degrees, duration - 1.5 or 2 hours.
Prepare a fixing solution: 1 tbsp. add a spoonful of 9% vinegar to 1 liter of water.
After washing, place the jeans in the fixing solution for 20-30 minutes.
Then wash the product in a machine at 40 degrees. WARNING: Do not use conditioner as this will damage the color of the jeans.
Then run the machine idle to get rid of any remaining ink in the drum.

How to dye jeans

Denim is a natural material that can be easily given almost any shade.

Before choosing a method to update the color, you need to decide how to dye your jeans and what products to use.

To update your jeans at home, you can use the following products:

The most common painting option is blue. This method is very simple, but the result will not last long.
So-called boiled jeans can be obtained using potassium permanganate. In this case, the result depends on skill and experience, since the process is quite complex.
You can purchase ready-made aniline dyes. By following the instructions on the package, you can quickly get the desired effect.
To obtain a more durable result, acrylic paints are suitable.
Jeans can also be dyed in the washing machine using powder dyes. The painting process is simple, but there is a small selection of shades available.

Blue

Affordable and inexpensive painting options include bluing. But, using this product, it will not be possible to radically change the color of the product; you can only make it blue.

Blue can be purchased at any hardware store.

How to dye jeans blue:

Dilute the blue in water whose temperature is less than 30 degrees. The brighter the color you want, the more product you need to use. To get a lasting shade, you can add 2 tablespoons of salt to the solution.
Place the jeans in the solution.
Leave them for a couple of hours. To ensure uniform painting, the product must be turned over periodically.
Rinse your pants in cold water.
To fix the color, rinse them in a weak vinegar solution.

The resulting result will begin to wash off immediately after the first wash, so this method of painting cannot be called optimal.

Powder painting

Painting jeans with powder paints will not harm your washing machine.

Using powdered dye and a washing machine, you can dye your jeans black. To avoid unexpected results, do not add washing powder and fabric softener to the washing machine. Jeans need to be washed first.

How to dye jeans in the washing machine:

turn the product inside out;
place the jeans in the washing machine;
pour coloring powder into the drum;
set the washing temperature specified on the product label;
start the standard washing program;
take out the painted item and rinse in cool water;
rinse your jeans in a vinegar solution;
wash them in a washing machine with washing powder;
dry.

The result of dyeing is a durable, bright color. You should not worry about the washing machine - the use of dye will not affect its functionality in any way. The maximum that can happen is painting the rubber seals. But this problem can easily be solved by wiping them with a damp cloth.

Acrylic paints

Using acrylic paints, you can apply any design to the fabric, which will help hide problem areas and make the item unique and inimitable.

The process will require acrylic paint, brushes of suitable sizes with stiff natural bristles, and an iron. After the design has been applied to the fabric, the product must be ironed from the wrong side.

But this method is short-lived, since after several washes the color of the paint will begin to fade, and may even begin to fade. Therefore, this method is not suitable for everyday items that are often washed.

Aniline dyes

Among textile dyes, aniline dyes are the most popular. This is due to its ease of use and lasting results.

To correctly calculate the dosage, before starting work you need to read the instructions and recommendations on the packaging.

To dye jeans, you need to boil them in a dye mixture with salt, stirring occasionally. Then rinse in vinegar solution and dry.

How to quickly and efficiently dye jeans black?

Redying your favorite trousers in a rich and uniform black tone will not cause any trouble if you follow the technical recommendations for the process. Before you dye your jeans black, you need to wash them again to make sure there are no greasy stains or streaks. It is forbidden to add rinse conditioner during the washing process; it can affect the quality of the final result.

The easiest way to dye is using a powder composition for high-density fabrics and a washing machine. You just need to strictly follow the instructions. If it is in an incomprehensible language, then most often the procedure comes down to sequentially performing the following manipulations:

We check the trouser pockets for items and turn the jeans inside out. We place them in the drum, and pour the dye into it.
We set the optimal washing temperature for a given fabric (check it on the label) and start the standard cycle. No powders or rinses are used.
If the powder does not contain components intended to fix the color, then after washing the product, rinse the product again in water and vinegar.
After all the steps, the trousers need to be washed again, this time in the most usual way, with the addition of powder or gel. Dry your jeans naturally.

This type of processing will not harm the machine in any way, so don’t worry about it. Only the rubber inserts may become slightly stained, but the deposit can be easily removed with a damp sponge.

Caring for jeans after dyeing

If you want to maintain the rich color for as long as possible, you need to follow the rules for caring for dyed jeans:

Drying in direct sunlight is prohibited;
washing temperature should not exceed 40°C;
dyed items should be washed separately from others and dried naturally;
Before washing, you need to turn your trousers inside out;
choose powders and gels for colored or black clothes as laundry detergents;
At first, it is undesirable to sit down and lean against light-colored upholstered furniture - the paint may imprint on it.

Product preparation

When preparing trousers for dyeing, the following conditions must be met:

Wash the material. In places where there are traces of dirt, the clothes will stain worse.
Bleach your pants using laundry soap, hydrogen peroxide, or a specialized product based on chlorine or oxygen. This will help restore deep color.
Remove buttons and metal objects.
Before the procedure, cotton and linen clothes should be boiled for 20 minutes in a solution of soap and soda. After this procedure, the material is rinsed.

It is recommended to dye trousers in distilled water. If you use tap water, then you need to add a spoonful of soda to the latter (for every 10 liters). Coloring is done in enamel or glass containers. Also for this procedure you will need two wooden spoons (sticks), with which you will turn the trousers over. It is recommended to work with rubber gloves.

Dyeing technology

Dyeing by hand and using a washing machine is different, so we will analyze each technology separately. The algorithm for manual painting will be as follows:

Dilute the black dye with water according to the instructions on the package, then pour the solution into a large container.
Place the trousers in a bowl of dye and leave for 30 minutes. You can adjust the exposure time of the paint on the fabric yourself depending on the color you want to get as a result.
After the required time has passed, transfer the product to a container of water and leave for 3-5 minutes.
At this time, pour the coloring solution into an enamel pan or bucket and place it on the fire.
Next, put your pants back into the paint, wait until it boils, stirring and turning over occasionally.
Boil the product in the paint for no longer than 40 minutes.
Then take out the jeans and place them in cool water with a little salt and vinegar (1-2 tbsp each). This will help set the color.
Coloring is complete. Now all that remains is to wring out the item and dry it.

The procedure for dyeing pants in a washing machine is as follows:

Wash the pants you want to dye as normal.
Pour 2-3 packages of the finished dye into a glass container and fill them with hot water. Mix thoroughly using a metal spoon.
Add 1 cup of salt to the solution and stir again until it is completely dissolved.
Fill a basin with warm water and pour a mixture of dye and salt into it. Stir.
Add 1 glass of vinegar and 2-3 tbsp to the resulting solution. washing powder or liquid detergent. Beat until foam forms and pour into the machine.
Despite the fact that the automatic washing mode involves rinsing, nevertheless, at the end of the program, you must additionally rinse the clothes manually.

There are several ways to dye your trousers at home. Choose the one that suits you best and give old things a new life.

Hand dyeing jeans

You can guess that the essence of hand-dying jeans is to reproduce as accurately as possible all the actions that a washing machine performs, only “in dexterous and tired hands.”

Method 1

In other words, the algorithm of your actions to dye jeans blue at home will look like this:

Take an enamel container large enough to pour six to eight liters of water and coloring solution into it. Conduct an inspection on the balcony or mezzanine, find the largest and most terrible basin, and you will not be mistaken with the volume. Add water and light the burner.
Preparing dye for jeans. Exactly the same as when preparing for machine dyeing: filter through cheesecloth and dissolve in warm water.
Remember how you poured salt and soda into the drum? Now your drum is a basin.
We throw our jeans into a basin of heated water and pour the dye dissolved in the required proportion on top. With this method of dyeing, jeans should completely go under water and not float up.

Important! The water should be hot, but not boiling.

Cook for forty minutes to an hour to thoroughly dye your jeans blue at home. Don’t forget to prepare our treasured vinegar solution towards the end of cooking.
When the jeans are boiled, rinse them first in warm and then in cold water under the tap.
Soak in vinegar solution.
We are relieved to wash our jeans with regular laundry detergent.

Important! The washing machine eliminates human intervention in the process. This is its advantage and its disadvantage. It is unlikely that you will be able to get a subtle, interesting pattern on your pants using machine dyeing. A game of tones and colors too. Handmade is a different matter. You not only observe the process, but you can also make any changes to it at any time.

Method 2 - Blue staining

Blue (solution or powder) is one of the most affordable, widespread and easy-to-handle fabric dyes. In addition, blue is a substance that has been tested for more than one generation and is quite safe.

Important! Blue is a mixture of an organic dye called methylene blue, with starch in various forms and concentrations. The word “blue” does not mean one specific dye, but a whole class of dyes. Insoluble bluing is not suitable for full coloring.

Perhaps the most important advantage of this dye for jeans is that the fabric does not need to be boiled anywhere, all you need to do is:

soak the jeans in warm water with a solution, where you can add a couple of tablespoons of salt;
then, to consolidate the result, soak in diluted vinegar.

Small technical details depend on your personal discernment:

someone, in order to dye jeans blue at home, leaves the blued jeans in a basin overnight;
someone, worried about the uniform distribution of the shade, lays out their jeans in the bathtub and stares intently at the cloudless blue for two hours.

Important! The major disadvantage of this dye for jeans is that they do not last long: be prepared for the fact that after two or three washes you will have to repeat everything again.

Drying jeans, unless your plans include some interesting effect, should be in a perfectly straightened state so that the flowing water and the folds of the legs do not change color.

Important! To properly dye jeans blue at home with this product, the pants must be completely immersed in water.

Method 3 - Varenki

The word is a legend, a sound in which so much is intertwined for the hearts of more than one generation. In practice, the cooking itself in the manufacture of boiled jeans is far from the main thing. As you may have noticed, some kind of thermal effect is required for any dyeing method.

The main chemical reagent, the “Whiteness” dye, is a little more difficult to find than laundry soap or just bleach. However, by welding jeans with “Whiteness” using the traditional method (a glass in a bucket of water), you will simply lighten them.

The charm of dumplings is in the famous white spots, stains and folds, in the texture. In order to create such a texture, you need to twist the pants and securely fasten them with rope and clothespins, otherwise the resulting composition will fall apart during cooking.

Important! Not everyone knows that the technique of dyeing fabrics pre-twisted into intricate knots, called tye-die in the West, came from Asia and Africa. In Japan, the so-called shibori-zome knot dyeing has been elevated to the rank of a genuine art since time immemorial.