In any case, during wearing, they are all exposed to negative effects from travel in transport, precipitation, low temperature, dust, and friction. These factors spoil the appearance and shorten the service life. To counter this, you need to take care of your sheepskin coat.
To choose the right cleaning method and products, it is important to determine the type of material. You should start by studying the manufacturer's label.
Cleaning natural sheepskin coats
Among the many ways, it is difficult to make a choice. And yet, the dry method is suitable for things made of fur velor, and the wet method is suitable for clothes made of laser-coated sheepskin. A suede sheepskin coat is cleaned using a delicate, dry method, and with a regular leather surface, both the first and the second.
Dry cleaning
Only dried items can be processed. They are laid out on a flat surface, and a sunny day is chosen for the procedure so that the spots are clearly visible.
- Cover the dirt with semolina and rub it into the surface with a thick cloth mitt using careful, massaging movements. You need to move from the edge to the center. Clean the surface by shaking and repeat the procedure. After achieving the result, treat with a hard bristle brush.
- Old traces of grease on the collar, pockets and sleeves can be easily removed with a rubber suede brush.
- Fresh stains and dirt are cleaned from the sheepskin coat using a piece of stale bread. You need to rub the affected area several times.
- Grease stains are sprinkled with starch, left to absorb for two hours and cleaned with a brush.
Advice: dull and hard leather on a sheepskin coat should be lubricated with pharmaceutical glycerin.
- A paste of tooth powder and ammonia can quickly deal with abrasions. Rub the affected areas with the mixture using a brush. This product can also be used to refresh a sheepskin coat after a season of use.
- If the stain is not greasy, then a piece of rubber soaked in kerosene for several hours will remove it. The product can only be used on dark clothing.
- Old stains from sheepskin coats are removed with kerosene or gasoline. Moisten a cloth in any of the products and rub it over the stain until it disappears. Ventilate in fresh air to remove odor.
Important: it is prohibited to use salt to clean sheepskin coats. The skin becomes rough and the item becomes unwearable.
Wet cleaning
When the dry method does not cope with contaminants, wet methods should be used.
- You need to start with a soap solution with the addition of ammonia. You will need half a teaspoon per glass of warm water. Regular shampoo or liquid soap is suitable as a detergent. Moisten a soft cloth with the mixture and treat the surface. When the stain has disappeared, wipe with a dry cloth and dry flat.
- At home, alcohol or gasoline is used for cleaning, but first you need to test the effect on an inconspicuous area.
Tip: when wet cleaning a sheepskin coat, avoid getting too wet. This causes the material to deform after drying. If this does happen, then during drying you need to periodically knead the item with your hands.
Types of stains
To remove grease stains from the surface of a sheepskin coat yourself, you need to use gasoline.
This product is most effective for removing this type of contaminant. You need to take a small piece of coarse cloth, gently moisten it in gasoline and rub the stain. This method cannot be called universal, since it can only be used for cleaning sheepskin coats of dark colors.
If you need to remove greasy stains from a light sheepskin coat, then you need to take ammonia and tooth powder. Actions should be performed using a coarse brush. You need to take tooth powder and dilute it a little with ammonia, and then rub the product with a brush into the stained areas.
To remove a wine stain from the surface of a sheepskin coat, you need to quickly move on to cleaning. Old wine stains will no longer be able to be removed.
The wine stain should be sprinkled with starch or semolina. These substances perfectly absorb moisture, so they will help you quickly deal with stains. When semolina or starch absorbs the remaining wine, it is necessary to clean the contaminated areas using a dry brush.
If your favorite suede sheepskin coat has lost its attractive appearance over time, then you can use a combination of soda and milk. This tandem will allow you to clean the product from various types of contaminants, and will also perfectly clean the shiny surface and renew the old item.
Milk and soda will not affect the color or texture of the product. Before cleaning the sheepskin coat, you need to remove dust. To prepare the cleaning product, you will need 1 teaspoon of soda per 200 ml of warm milk. You need to take a cotton swab, carefully moisten it in the prepared product and lightly wipe the surface of the clothing. A contaminated swab must be replaced with a new one when cleaning the product. Next, the surface must be wiped with a sponge soaked in a vinegar solution. For one liter of water you need to add just one teaspoon of vinegar. After cleaning, the surface of the sheepskin coat should be wiped with a dry cloth and wait until it dries completely.
There are times when a sheepskin coat needs to be wiped off from the paste of a ballpoint pen. This often applies to men's sheepskin coats, since men often work in offices and are not always neat.
You can use dry Vanish. It is enough to sprinkle the powder on the stained areas, moisten them a little, and then gently rub with a foam sponge to remove all traces. After cleaning, any remaining product must be washed off with water.
Ballpoint pen stains can be easily removed with sandpaper. First you need to rub the dirty pile in a circular motion. Next, wipe the cleaned area with a swab well wrung out of water. The suede should not get very wet.
The following recipe is ideal for cleaning sheepskin coats from mold. You will need to take one teaspoon of acetic acid, one teaspoon of soda and liquid soap per 200 ml of water. You need to dissolve the soap in water, then add vinegar and soda. It is better to place the glass in the sink when creating the solution, since mixing all the ingredients is accompanied by strong foaming.
First, you need to test the solution inside on a small area to make sure that the dye adheres firmly to the material. If the paint cannot be removed, then use a sponge to go over the entire surface with the prepared solution. After cleaning, remove any remaining solution with clean water. After the procedure, the sheepskin coat must be thoroughly dried.
Faux sheepskin coat
The following recommendations will help you clean a sheepskin coat at home made from non-natural material.
Dry
- Rub the greasy areas with a student's eraser, and remove any remaining gum with a brush.
- Talc and potato starch are suitable for combating greasy stains. The contamination is sprinkled with a thick layer of powder and left for 2-3 hours. Clean clothes by hand with a brush or vacuum cleaner.
- To clean stains and dirt, use dry baking soda or a crust of bread.
- The steam generator successfully removes dirt from artificial sheepskin coats, lifts the pile and refreshes the appearance. After the thermal procedure, walk over the surface with a rubber suede brush.
Tip: traces of salt remaining on the sheepskin coat after drying are removed with a piece of stale black bread.
Wet method
- Cleaning with soapy water. Prepare warm water and whip a small amount of hair shampoo or washing gel into foam. Spread the sheepskin coat on the table. Use a damp microfiber cloth soaked in the solution to wipe the surface several times. Remove foam with a wet sponge and blot with a towel. Hang the product on a hanger to dry at room temperature.
- A soapy solution of laundry soap is suitable for cleaning. To do this, grate 50 g of soap and add 100 ml of water. After treating the surface, the product must be thoroughly rinsed off.
- A solution of ammonia (250 ml per 1 liter of water) will thoroughly clean the surface of accumulated dust and dirt. Finally, wipe with a damp, clean sponge and dry.
Warning: Using heaters to speed up drying may damage the item.
- Old and difficult to remove stains can be effectively removed with the following composition. Mix equal parts of ammonia and glycerin, add a teaspoon of borax and dilute the mixture with 0.5 liters of warm water. Moisten a gauze swab in the solution and wipe away the dirt, moving from the edge to the center. When finished, rinse with a damp microfiber cloth and hang to dry.
- It is recommended to bleach a light sheepskin coat made of artificial material with hydrogen peroxide. The substance is diluted with water in equal proportions. Moisten a soft sponge in the solution and wipe.
Washing a fur collar
When washing a fur collar, you should first find out what kind of fur it is - natural or artificial. This is usually indicated on the product label, which is why it is important to save all tags and labels after purchasing a sheepskin coat. If you do not have a label, you can determine the type of fur by looking at its base. If the base of the fur collar is wrinkled and stiff, then it is natural. The fabric base indicates that the fur is artificial. Once you have determined the material, we will figure out whether it is worth washing.
Washing natural fur using a washing machine is strictly prohibited. This is due to the fact that natural fur has a leather base, which has a natural certain set of special substances and fats that protect the skin from destruction and the fur from rash. Due to the action of chemically active substances, which are contained in absolutely all powders without exception, all the fats contained in the skin will be washed away. As a result, we will lose the beautiful appearance of the fur and the elasticity of the skin.
What to do in this case? We have a few tips that will help your product maintain its great appearance even without washing:
- First, take a pack of starch.
- Sprinkle the area with this powder.
- Then gently rub the fur in the same way as when hand washing, but without using water.
- The duration of the procedure is no more than 10 minutes.
- Shake off the starch. If powder residues are stuck in the fibers, simply brush them out with a natural bristle brush.
To wash or not to wash
At first glance, washing is the easiest and most cost-effective way to refresh a sheepskin coat and get rid of dirt. But it's not that simple.
Doing this is strictly prohibited if we are talking about a natural sheepskin coat. From water it becomes deformed, loses size and stretches. After drying, the material warps, becomes brittle and unusable.
This method is suitable for a sheepskin coat made of artificial material. You need to start from the composition of the raw materials. A thing made of acrylic or polyester can be easily washed at home. Is it possible to wash natural sheepskin coats in a washing machine? It is not recommended to do this so as not to spoil the item.
Artificial fabric will not lose its appearance and shape after washing if the basic rules are followed.
How to wash a sheepskin coat at home:
- Use hand wash only. The machine deteriorates fabric and fur.
- Soaking, rubbing and twisting the item is prohibited.
- Use warm water t=30°C.
- Use liquid detergent because it does not leave stains.
Important: when washing artificial sheepskin coats, do not use hot water above +40° and stain removers with chlorine.
How to wash
Dissolve detergent in a suitable sized container. Spread the sheepskin coat on the floor with the fur side down or hang it over the bathtub. Take a soft sponge, moisten it and begin wiping the surface with light movements. There is no need to rub or press so that there are no abrasions. Rinse the sponge periodically.
Thoroughly rinse off the foam using a shower head or pouring it from a ladle onto clothes hanging above the bathtub. Make sure that the sheepskin remains dry, otherwise the pile will stick together. If water gets in, blot with a cloth and ruffle the fur with your hand. To remove moisture, wrap the sheepskin coat in a roll in a terry sheet.
Dry clothes hanging on hangers, on the balcony or outdoors in the warm season, or indoors at room temperature. Do not forget that the rays of the sun make an artificial sheepskin coat hard. Avoid exposure to sunlight and heating sources.
Practical recommendations
The rules for wearing a sheepskin coat are simple, but they help maintain its cleanliness, beautiful appearance and quality for a long time:
You need to think about caring for your sheepskin coat when you purchase it. You can get important recommendations from the seller for storing and cleaning it.
Therefore, it is important to leave and save all accompanying documents, as well as tags and labels. Expensive items usually have a warranty card confirming the manufacturer’s obligations in the event of any defects in the product.
In this way you can also protect yourself from counterfeiting. When purchasing a sheepskin coat, you should buy special care accessories - a sponge, a brush for cleaning and combing the fur. The item should only be worn in cold, dry times. If it happens that the sheepskin coat is wet, you need to dry it away from the air conditioner, radiator or heaters. It should only be put in the closet when dry. After winter, the item should be thoroughly cleaned in a dry cleaner or at home, and put away for summer storage in a special, breathable case. It is advisable to keep clothes packed in this way separately from other things or at least at some distance; When worn, even carefully, the product should be regularly inspected, and if defects are found, they should be eliminated immediately.
If you are afraid of spoiling it or simply don’t know how to clean a natural sheepskin coat at home, it is better to take it to specialists who professionally deal with chemical cleaning. Unfortunately, even such institutions cannot guarantee that clothing will not be damaged during the complex processing process. Therefore, it probably makes sense to learn how to take care of your clothes yourself, using time-tested home cleaning methods.
The article “How to clean a sheepskin coat at home quickly and efficiently” turned out to be useful - share it with your friends using social network buttons
How to care for a sheepskin coat
The item will look attractive for a long time; you won’t have to tint it or take it to the dry cleaner if you care for it properly. When the winter season is over, the sheepskin coat must be cleaned before storage.
- To store the item, hang it on hangers of a suitable size and cover it with a fabric cover with ventilation.
- When exposed to dry air, natural material dries out and cracks. The optimal storage mode is 18-20°.
- After getting wet from precipitation, clothes should be dried in natural conditions, hung on hangers. There is no need to unfold it.
- Stains must be removed immediately after they appear. Removing old prints becomes problematic and leads to thinning of the skin in this area.
Advice: do not use a metal brush to clean sheepskin coats made of natural and artificial materials. It injures the surface, scratches appear, gradually turning into holes.
- To increase the protective properties and preserve the original appearance, the cleaned sheepskin coat is treated with dirt and water-repellent impregnation.
- When cleaning, follow the manufacturer's recommendations indicated on the label. Pre-test the product on the reverse side.
Important: ironing a sheepskin coat made of any type of material is prohibited.
- Steaming your clothes using an iron or steamer will help keep them in good condition longer.
- After exposure to hot steam, there will be no insects and mold, and dirt can be easily removed without damaging the surface.
- The inside of the sheepskin coat should be periodically brushed with a brush with natural bristles.
It’s not at all difficult to return outerwear to an attractive look if you know how to clean a suede sheepskin coat.
Before you start cleaning
Before you get ready to clean the product, you need to know what types of sheepskin coats there are. The overwhelming majority of all winter clothes are made from sheepskin, but much depends on the country in which the product is made; it can be completely different. Materials produced in Spain are considered the most delicate and thin, but the hardest and heaviest are American.
Any high-quality sheepskin coat is sewn from a material called fur velor. Today there are two types of products made from this material. Sanded leather is velor that does not have a coating. Sheepskin coats made from this material look expensive, but quickly get dirty and worn out. In turn, coated sheepskin coats are made from high quality material that has another layer, which consists of dirt-repellent additives and natural resin. A sheepskin coat made from such materials is more durable and less difficult to wear.
Effective household chemicals
You can also clean your sheepskin coat with special products that can be purchased at a household chemical store. The main condition is strict adherence to the instructions placed on the bottle or box of the purchased drug.
The line of drugs from the brands “Salamander” and “Dezamsh” have long been especially popular; in the same Amway chain you can find the effective remedy “Lok”.
Many owners of suede products speak well of a special cleaning foam, which effectively removes any dirt and is suitable for any color. There is also a special sanding cube that can quickly remove fresh stains on velor products.