The best and effective ways to wash windows without streaks at home

Preparation for the procedure

The clear glass reflects the sky and bright greenery.
Before washing the windows, you should prepare:

• clear the window sill from flowers and foreign objects;
• remove and soak curtains;
• remove and carefully wash the mosquito net;
• remove and brush the blinds;
• pour water;
• prepare at home or buy cleaning solutions and sprays.

Prepare equipment in advance: sponges, rags, deep basin (bucket). You will also need devices that make the work easier: windshield wipers, brushes and scrapers. White paper will come in handy to blot the moisture.

Reference! Auxiliary tools are placed on the table so that the items are at hand and do not accidentally fall into the street.

Additional recommendations

To quickly and streak-free wash a balcony window or glass inserted into a door, you should divide all the work into small sections and work gradually, starting from the top. You need to finish cleaning by washing the window sill and finishing the glass in the handle area.

Common mistakes when cleaning windows

Windows should be washed in cloudy, windless weather. In the sun or strong wind, cleaning products dry quickly, poorly washing away dirt and leaving streaks.

The window will not be clean if:

• Do not follow the recommended procedure.
• Neglect pre-treatment.
• Use untested home or low-quality store products.
• Do not clean the fittings or wash the mosquito nets.
• Clean the glass with dirty rags that were previously used to wash the window sill or the street side.

You shouldn’t skimp on cleaning products or the quality of napkins by using old rags instead. This will significantly reduce the quality of cleaning, which will require additional time and effort.

Where to begin

Clean glass looks sloppy if surrounded by dirty frames, there is a layer of dust in the window opening, and the window sill is covered in stains. Therefore, before washing windows, plastic or wooden structural parts are washed on both sides with soap foam. To remove old dirt, add 3 to 5 drops of ammonia. The cleaned frame is wiped first with a damp cloth, then with a dry cloth. Thoroughly wash metal fittings, drainage holes, and seals. Sometimes these places have to be cleaned with an old toothbrush or a cotton swab.

First clean the frames

Additional Information! Abrasive pastes and chlorine-containing bleaches should not be used, as these products corrode paint and form cracks in wood and plastic.

Indispensable helpers at your home

Special devices simplify and speed up the window cleaning process . And sometimes it’s simply impossible to wash the outside without them.

Steam cleaner

You can clean your windows well and quickly using a universal steam cleaner with a special attachment equipped with a rubberized scraper. There is no need to use household chemicals or make any effort.

Operating principle of the device:

1. Water (purified or distilled) is poured in and heated. 500 ml is enough for a cycle.
2. A jet of steam is generated and released under pressure.
3. It destroys the structure of contaminants, facilitating rapid removal.
4. The scraper on the nozzle removes excess moisture from the surface.

The steam generator is easy to use, lightweight, and suitable for treating almost all surfaces. An additional advantage is surface disinfection.

If you pour warm water into the device, this will speed up the boiling process, therefore, you can start cleaning faster.

Magnetic brush

The device cleans the glass on both sides at the same time , therefore saving the housewife time. The work requires a soap solution.

It is not recommended to use dishwashing detergent that produces a lot of foam.

The device consists of two identical halves, which are connected through glass by the force of magnetic plates. Both parts are covered with soft material (foam rubber, felt), one for the inside, the second for the outside (equipped with a safety rope).

Instructions for use:

• 
  apply a detergent or solution to the glass (preferably from a spray bottle);

  Read also:  What operating modes are provided in the Indesit washing machine, how to use them correctly?
• rotate one half of the brush at an angle of 90 degrees to neutralize the effect of the magnet;
• wet the parts in water or soap solution;
• secure the safety rope to your hand or window handle;
• attach one half to the inside of the glass, the other to the outside - the attraction of the magnet will work.

All that remains is to choose a hand position that is convenient for work, the amplitude and direction of movements. It's best to start with the area adjacent to the frame.

Trajectory:

• nearest bottom corner;
• up;
• to the side;
• down;
• starting point.

The middle part is processed from top to bottom. If necessary, repeat the procedure.

To operate the device effectively, you must read the manufacturer’s instructions and follow the recommendations. It is better to purchase miracle brushes from official manufacturers, so as not to encounter the fact of a fake.

How to wash windows without streaks

In winter and summer, dust is removed from glass surfaces and stains are removed. In spring and autumn it is worth carrying out general cleaning. To ensure that no traces remain on the dried glass, at the beginning of the procedure, treat the outer part of the window, then move on to the inner side. Stained areas are cleaned of dust with a napkin moistened with soapy foam. The rag is first moved vertically, then horizontally, while rinsing 3-4 times or replacing with a new one. Hard-to-reach corners covered with dirt are washed with the abrasive side of the sponge. After removing the dirt, change the water and take the prepared detergent. Then polish the surface with a dry soft rag or crumpled paper towel.

The cleaning agent is evenly sprayed onto the glass.

Store-bought emulsions and sprays sometimes cause allergies. Therefore, housewives often use home recipes to clean windows without streaks. The products at hand are easily accessible, do not irritate the mucous membranes and skin of the hands, and do not leave cloudy

It’s useful to know, read: - What and how to bleach tulle if it has turned yellow and gray.

Vinegar and lemon juice

Lemon juice and acetic acid are universal folk remedies that get rid of stubborn stains on clothes and unpleasant odors in the kitchen. Liquids at home are also used to clean mirrors, glassware, and windows.

Combine 0.5 liters of water and 0.1 liters of vinegar. If the cleaning was done a long time ago, pour equal doses. The prepared mixture is poured through a funnel into a spray bottle and evenly applied to the glass. Then wipe with a soft cloth. This treatment will not leave streaks, will add shine to transparent surfaces, and will repel insects. To prepare an effective composition at home, mix the following components:

• vinegar - 0.07 l;
• water – 0.5 l;
• dishwashing gel – 0.5 tsp. l.

The resulting liquid is used to wipe off contaminated wooden parts and plastic double-glazed windows. Rinse until foam is completely removed, wipe with a soft cloth.

Vinegar removes dirt easily, but leaves a strong odor. Citric acid has similar properties, so they often try to replace the strong-smelling solution with aromatic lemon juice: take 100 ml of juice (4 - 6 tablespoons) or 2.5 g of powdered acid per 500 ml of water.

Popular folk remedies

Reference! Before the procedure, rubber gloves are worn to protect the skin from the aggressive effects of acids.

Chalk

Dilute crushed white chalk (tooth powder without additives): take 6 tablespoons per 3 liters of liquid. l. powder. The prepared mixture is applied to clean windows. Dried residues are removed with paper, and the glass is polished with a dry microfiber cloth.

Ammonia

Ammonia, a universal household cleaner, is used to clean glass, window sills and frames. Ammonia easily removes dried dust and nicotine deposits; disinfects coatings. To prepare the working composition, add 3 tablespoons to three liters of cool water. l. ammonia. For severe contamination, pour in 1 tablespoon. l. formic alcohol or vinegar.

Additional Information! After working with strong-smelling substances, the apartment is well ventilated.

Tea

Pour two tablespoons of strong tea into a glass. l. acetic acid. The mixture is poured through a funnel into a spray bottle and the glass is treated. First scrub with a foam sponge, then wash off the dirt. The remaining moisture is absorbed with newspapers and finally wiped with a new rag or microfiber cloth.

Starch

First, wash off the dirt. Dissolve 1 table in one liter of cold water. l. potato or corn flour. The composition is poured into a spray bottle and distributed evenly over the washed area. The dried mixture is carefully removed with a clean, dry cloth.

Starch absorbs excess moisture

Salt and soda

Saline solution or baking soda at home is often used during cleaning. 80 g of salt are diluted in 0.5 liters of cool water. Use microfiber moistened with salty liquid to wipe the glass surface, rinse, and blot with a soft cloth.

Sometimes two products are combined to prepare an effective detergent: take 0.5 cups of salt and baking soda per 4 liters (sometimes add two tablespoons of alcohol or acetic acid). Stir thoroughly until the smallest grains dissolve. The resulting solution wipes away dusty deposits and children's “artwork”, and removes fingerprints.

Melamine sponge

Useful for wet cleaning in the kitchen:

• will wash away stubborn dirt;
• will remove dried greasy splashes;
• will remove yellow-gray nicotine residue.

Wet the sponge, lightly wring it out and rub the contaminated areas. Then the glass is washed and wiped with a clean cloth.

Reference! A melamine sponge should not be wrung out frequently or twisted too much: constant pressure destroys the porous structure of the material, making the item useless.

Starch, vinegar and alcohol

A common home remedy is prepared for cleaning windows. Two tables. spoons of potato (corn) flour are diluted in 1 liter of cool water. Add 0.5 cups of acetic acid and ethyl alcohol. The mixture is poured into a spray bottle and shaken vigorously to mix the ingredients. Spray the dirty area to be treated. The remains are washed off with a paper towel.

Newspaper

This finishing method was invented by our grandmothers. First, the surfaces are washed with any preparation, then the cleaning agent is washed off, and the drops are blotted with newspaper. Soft, thin paper quickly absorbs remaining moisture. Printing ink gives the glass a shine.

The final stage is polishing with newspaper.

Potassium permangantsovka

An antiseptic helps to cope with everyday difficulties. The pale pink solution of potassium permanganate does not leave streaks; Easily removes stains left by insects and destroys microbes.

Onion

Onion juice adds shine to surfaces and removes traces of insects from frames and glass. A medium-sized onion is cut into two parts and the dirty areas are cleaned with a cut. Then the remaining drops of juice are washed off and wiped dry.

Potato

The raw tuber is cut in half. Use the cutting area to gently rub the dirty surfaces. Traces of dried starch are thoroughly washed and wiped with a paper towel.

Glycerol

It’s not enough to wash the window without streaks; you want it to remain clean for as long as possible. A pharmaceutical drug can easily cope with this. Three components are connected:

• glycerin – 80 ml;
• water – 60 ml;
• ammonia – 6 drops.

The ingredients are thoroughly mixed. A bamboo napkin moistened with a solution is used to rub the already washed double-glazed windows until they shine. Glycerin will repel dust from the glass; will protect against icing and the formation of streaks after rain.

Additional Information! Preparations with antistatic properties are often used if the house is located next to a busy road.

Treatment with glycerin prevents the formation of drips

Blue

Pour a pinch of blue into a liter of any detergent. To prepare a working solution at home, mix the following components:

• 2 liters of warm water;
• 50 ml acetic acid;
• 50 ml of ammonia;
• 1 table. l starch.

Add blue, stir until the ingredients dissolve completely. Wash off the dirt (dried dust is moistened 2-3 times), rinse. Wipe dry with a soft cloth and newspaper. The window sill and frames are not washed using this method: colored spots may appear.

It’s useful to know, read: - 20 ways to remove traces of adhesive from tape from plastic and other surfaces.

Soapy water

Plastic and wooden parts are cleaned with soap foam. To obtain a detergent composition, take any detergent:

• liquid soap;
• soap shavings;
• Dishwashing concentrate;
• washing powder;
• washing gel.

The product is poured with warm water and mixed. If the dirt is difficult to clean, apply the liquid 2 to 3 times. After wiping away dirt from the frames, traces of soap are washed away. They try to use other means to wash glass, otherwise cloudy spots will remain. But if the windows are very dirty, soapy liquid is used, reducing the concentration of the solution. The remaining foam is thoroughly washed off, changing the water 2–3 times.

After cleaning with air conditioning, the windows will shine like new.

Fabric softener

Concentrated laundry care gels contain silicone, surfactants and additional ingredients, so they easily soften and remove dirt and prevent the settling of dust particles. To prepare the working fluid, combine 50 ml of conditioner and 0.25 liters of lukewarm water. Rub the composition onto the dusty glass with a sponge, then wash it off (if you haven’t washed it for a long time, apply the liquid twice). The final stage of processing is polishing with newspaper using light rotational movements.

Reference! To clean the children's room, use conditioners for washing children's clothes: “Eared Nannies”, “Help Children’s”, “Umka. Sweet Dreams". These preparations remove dirt well, are hypoallergenic, and aromatic.

What weather is best to wash windows?

When cleaning windows, be sure to wear protective gloves.
When thinking about the best way to wash windows, do not forget about the main thing - the weather, which is ideal for cleaning them.

The bright sun is unlikely to help, because the stains will not be visible, and the liquid on the surface will dry very quickly, making it impossible to wipe it off with a rag. And the rain is unlikely to be a help, because it will not allow you to wipe the glass dry. Therefore, it is best to do this business in cloudy weather, when there is no precipitation.

In addition, it is worth remembering some rules that will make cleaning safe and simple:

• be sure to wear protective gloves;
• if products containing ammonia are used, it is important to properly ventilate the room after cleaning;
• if the windows are high, use a mop with a long handle; it is much safer than a pyramid of chairs and stools.

To summarize, it is worth noting that washing window openings is not the easiest task, which requires a certain skill and experience. It is important to remember to put your own safety first. And the use of folk recipes will ensure the cleanliness of the glass and allow you to wash the windows without streaks.

Tools

Before deciding to wash the windows, prepare the equipment. The following tools make the job easier and help treat hard-to-reach areas:

1. Vodosgon removes dirty water and soap scum, and helps to thoroughly wipe the glass.
2. The rubber scraper safely removes dirt and detergent residues. A scraper is easy to scrub glass units from the outside and wash panoramic or high windows.
3. A telescopic mop with a retractable handle helps you reach the corners at the top of the structure.

An electric steam mop delivers steam under pressure and dissolves old dirt. Simplifies the procedure when it is impossible to fully open the windows and when the apartment is located on high floors. To speed up work, they began to often use other household appliances.

Magnetic brushes

A device in the form of two brushes, which are attracted to each other by built-in magnets, simultaneously treats the outer and inner sides of the glass.

The magnetic mechanism is convenient to operate

Brushes are easy to use:

1. Wet the fabric parts with the prepared detergent.
2. A wire with a ring is attached to the half located outside. This part is put on a finger, a window handle, or held in the hand to hold the outer half.
3. Parts of the device are installed opposite each other on different sides of the window.
4. The device is held on the inside by the handle and moved around the area to be treated as if it were a napkin.
5. Having completed the processing, both parts are disconnected from the glass.
6. Fabric parts are washed and dried.

Some models do not grip corners; these areas must be cleaned additionally. When purchasing a magnetic mechanism, take into account the thickness of the glass unit. Based on this criterion, manufacturers conditionally combine products into 3 groups:

• for processing two-chamber views (up to 40 mm);
• for single-chamber types (24 – 28 mm);
• for washing glass (80 mm).

If you do not take this parameter into account, the magnet power will not be enough for the thickness of the window.

Additional Information! Regular cleaning with magnetic glass cleaners is sometimes carried out with plain water, without adding cleaning agents.

Blots remaining after repairs and old dirt are pre-treated

Windshield wiper Karcher

To wash smooth surfaces - tiles, mirrors and windows - at home, compact devices produced by Karcher are used:

• windshield wiper - a hand-held device similar to a vacuum cleaner brush, powered by electricity or a battery;
• steam generator is a multifunctional unit, in addition to washing glazed balconies, it is used for steaming curtains and clothes, disinfecting apartments, and wet processing furniture;
• mini-washes are used on the lower floor to clean the outside of panoramic windows; water is supplied under high pressure.

The technique simplifies cleaning, helps dissolve dried dirt, wash windows, and wipe glass surfaces until they shine without leaving streaks.

For home cleaning, manual windshield wipers are often purchased: the devices are efficient and consume little electricity. Manufacturers promise that the equipment will work smoothly if you use a concentrated window cleaner produced under the same brand. The operating principle of a manual windshield wiper is similar to a vacuum cleaner:

1. The cleaning agent is diluted with water in a ratio of 1:10 and evenly applied to the glass with a spray bottle.
2. The solution is distributed with a fabric nozzle over the glass unit.
3. The suction nozzle is pressed against the area being treated so that dirty water is drawn into the reservoir.
4. After finishing work, the tank is emptied, washed and dried.

Sometimes during operation, symbols appear on the display - error codes that you should pay attention to.

Cleaning is easy with a Karcher windshield wiper

Reference! The device must not collect dust and large debris: dirty particles clog the nozzle and cause malfunctions.

Napkins and rags

The napkin is chosen taking into account the composition of the fibers. It is easy to wash windows with pieces of viscose or latex, but these materials are not suitable for rinsing, and especially for wiping: they do not absorb moisture well and are quickly saturated with odors. To wipe double-glazed windows, take napkins made from the following types of fibers:

• bamboo - do not absorb foreign odors, absorb liquid;
• cellulose – removes residual moisture and dust;
• microfibers – clean glass without leaving a trace; Reusable napkins are washed after each cleaning.

The treatment should be completed by polishing the surfaces with artificial suede: the porous soft fiber removes the last drops of water, does not leave lint or streaks, and does not scratch the glass. To avoid coarsening of the material, wet suede is placed in plastic packaging after work.

Additional Information! It is convenient to wash glass with fragments of old non-fading linen or cotton items.

Should you wash your windows yourself?

If the apartment is located high, it is dangerous to wash the windows from the outside. It is worth using the services of a cleaning company.

The main advantages of professional cleaning include:

• Equipment for working at height and insurance. Cleaners can work at heights without risking their lives, so they will clean the glass better.
• Professional tools and chemistry. No streaks or stains: special detergents remove dirt, even in the most difficult to reach places (cracks, hinges, locking mechanisms).
• Fast and high quality work. Cleaners can handle even a large range of work without compromising the quality of washing.

Household chemicals for window care

The ingrained dirt is cleaned with household chemicals. Before you decide to clean a window with the finished substance, carefully read the instructions.

Spray cleans glass until it shines

They buy drugs after studying the composition:

1. Sprays containing ammonia have a strong smell, but remove stubborn dirt and make glass shine.
2. A surfactant-based cleaning solution removes dirt without damaging the surface. The products repel dust particles and are safe for health. They often contain essential oils or perfume compositions, so they smell nice.
3. Liquids with isopropyl or benzyl alcohol clean windows without leaving traces and even dissolve old greasy stains. No need to rinse off.

To enhance the effectiveness of the drug, the composition includes additional components:

• silicone;
• antistatic;
• water repellents.

These additives cover the surface with a thin film that protects from dust particles; inhibit the settling of raindrops.

Reference! If the window faces a busy highway, buy a multi-component product that removes stubborn dirt and prevents dirt from being retained.

Common multi-compound drugs:

• Synergic;
• Clin Windows and mirrors;
• Frosch;
• Cinderella Clean windows;
• Meine Liebe;
• Unicum.

Due to the complex of substances contained, windows are easily washed until transparent, and the need for washing appears less frequently.

Strengthened formula allows glass to become transparent

What you will need

Of course, in order to wash dirty windows without leaving streaks, store-bought or homemade cleaning products will come in handy first. In addition, you should prepare the following equipment:

• a basin or bucket for water for preparing a special cleaning composition;
• dry soft rags, dry microfiber cloths;
• for your own comfort, you can purchase a special mop with a sponge, a telescopic handle, and a position lock;
• to quickly clean windows, you can also use a glass cleaner with a soft sponge on one side and a squeegee on the other;
• professionals use special scrapers to remove solid contaminants. If desired, you can also buy a slick designed to collect moisture from the surface. This tool is an effective divorce prevention tool.

Before you wash windows on the second floor and above, you need to ensure your safety. For example, magnetic brushes are often used to clean the outside of glass. One part of it is attached from the outside, the other from the inside.

How to quickly wash windows after renovation

If the glass is not protected with masking tape or paper before repairs, even with careful work, multi-colored blots unexpectedly appear on the window. Then you have to think about what you can use to wash the window in order to quickly destroy the dirt. Before washing the surface, dirt is removed with detergents or dissolved:

1. Cement stains are cleaned with a cloth moistened with phosphoric acid. Before this, the window sill is covered with oilcloth or thick paper.
2. Acrylic paint drips are removed with a solvent - white spirit or gasoline.
3. Polyurethane foam is removed with Solvent-646: the multicomponent composition copes even with old traces.
4. Cif gel for the care of shiny surfaces will remove stains left on the glass after whitewashing with lime or chalk.
5. Drops of enamel (nitroenamel) are cleaned with acetone

Masking tape sometimes leaves marks that are difficult to remove. Sticky residues are dissolved with isopropyl alcohol, turpentine, drying oil or vegetable oil.

Why does dirt appear?

Knowing the reasons why structures become dirty, you can quickly solve the problem and correctly carry out the entire cleaning process. Here are the main factors of pollution.

• Precipitation. Snow, hail, and rain quickly pollute the outside. In addition to stains, spots appear.
• Dust. It appears not only outside, but also inside the room. We wipe it regularly, especially in the warm season. We do not leave dust on the windowsill, between the frames.
• Temperature changes. Lead to condensation accumulation. There can be especially a lot of it in the kitchen, where food is constantly being prepared. Streaks form.
• Smoking. A nicotine film appears on the glass.

During the repair process, paint and varnish materials may get on the glass and frames, which are quite difficult to remove. In order not to damage the surface, we protect them during work by covering them with film, newspapers, and cloth.

Floor slabs are laid between floors; they are also called lightweight slabs. These slabs are characterized by stiffening ribs and carry a standard load.

Why do stains remain after washing glass?

Sometimes housewives devote most of the day to cleaning, but they cannot clean the windows without streaks if the rules have been violated:

• cleaning was carried out on a sunny or windy day;
• the dirt could not be completely removed;
• the dosage of the detergent is not observed;
• used dirty napkins and sponges;
• the sequence of actions was not followed: if you wash the glass first, and not the frames, the window will be surrounded by streaks;
• An attempt to clean all the doors at the same time causes uneven drying of the detergents and the formation of streaks.

Often, unpleasant streaks appear when the cleaning agent is poorly washed off.

Sponges and brushes should be rinsed frequently

Robot and glass cleaner for streak-free window cleaning

The robot is located on different sides of the glass in a vertical position. The device is equipped with a navigation unit, which is responsible for moving the robot. Control is carried out using the remote control.

Cleanliness is guaranteed - the diligent robot will not miss a single millimeter of the surface

So far there are only two models of robots in Russia, but they are quickly gaining popularity.

How to clean different types of windows

Windows made of plastic or glass are washed according to the same scheme: wash off the dirt, then rinse thoroughly and wipe with dry soft rags. The difference lies in the choice of detergents for frames and window sills.

Wooden

First, remove dust from the wooden profile. Then the frame is washed with special pastes or emulsions for caring for wood. You should not use alcohol-based preparations, which corrode paint and varnish coatings and cause cracking of surfaces.

Plastic double glazed windows

Aggressive agents scratch the surface, so to wash plastic windows without streaks, use soap suds or a neutral detergent. Having washed the glass, we move on to caring for the fittings:

• wipe with a damp cloth;
• wipe dry;
• lubricated with machine oil.

The drainage holes are cleared of blockages, otherwise the seal of the window will be compromised. The seals are thoroughly wiped with a damp soft cloth. Silicone grease is applied to the dry surface.

Plastic frames are wiped with a soft cloth

Features of washing plastic windows (double-glazed windows)

Double-glazed plastic windows require special treatment. To clean glass, you can use ordinary soapy water, but it is better to give preference to products with more powerful components: isopropyl and ammonia, plant surfactants.

If you need to clean a plastic window, refrain from using the following products:

• gasoline, acid and solvent: lead to a change in the shade of the window frame;
• abrasive dry compounds that mechanically damage plastic;
• folk recipes based on potassium permanganate: drips can leave hard-to-remove pink marks on the frame.

When washing plastic windows, you can not be afraid to use a lot of water. The material from which the frames are made is not afraid of moisture.

You can wash the plastic profile using a special set of products, which is sold in stores. For example, similar kits are produced by REHAU. The kit includes products for cleaning profiles and glass and lubricants for mechanical parts.

How to wash mosquito nets and window sills

Window sills and mosquito nets are also regularly maintained.

Window sill care

Wipe off dust with a damp cloth. Do not wash with sponges with an abrasive surface or hard brushes: this will easily damage the wooden and plastic coating.

To care for plastic surfaces, buy products containing surfactants or alcohol. To remove contaminants, use safe substances that do not corrode plastic:

• white toothpaste or powder without additives;
• light laundry soap;
• hydrogen peroxide;
• washing powder.

Hard-to-reach dirt is cleaned in different ways.
Stubborn dirt and yellow stains are cleaned with a mixture of soda ash and washing powder (1:1). The detergent composition is carefully applied to the plastic and washed off after 2 hours. For wet processing, buy ready-made cleaning products:

• Sanita;
• Cif;
• Domestos.

Additional Information! Plastic parts should not be cleaned with aggressive agents: chlorine-containing bleaches, solvents and saturated acid solutions.

The tree should not be wetted too much. To clean the wooden surface, prepare a warm soapy solution. Stains are scrubbed spotwise with diluted ammonia (1 tablespoon per 1 liter of water).

Mesh care

Dust is retained on the nets that protect the apartment from insects, plant pollen and cobwebs settle. Dirt prevents air flow from entering the apartment and causes allergies. To restore free air circulation, mosquito nets must be cleaned every 1 to 2 months in summer and autumn. At the end of autumn, the nets are washed and removed. This is done in dry weather. First, the cellular structure is removed from the fastenings:

1. Holding it by the ears, lift the mesh to remove it from the lower recesses.
2. The lower part of the product is turned towards the street and lowered down.
3. When the canvas comes out of the upper grooves, the mesh is turned sideways and brought home.

The procedure is carried out in the bathroom.

First, carefully remove the mesh

To wash the cells from adhering dirt, use improvised means:

• baking soda solution;
• unconcentrated solution of ammonia or citric acid;
• liquid soap;
• dishwashing gel;
• washing powder (without bleach).

A heavily contaminated structure is first soaked in warm water. The prepared preparation is applied to the product with a soft brush and washed off after 5-10 minutes (sometimes the operation has to be repeated 2-3 times). Rinse with a shower, directing the stream at an angle of 40º so that the fabric does not deform.

Reference! Aggressive substances containing acetic or oxalic acid, as well as metal brushes, damage thin synthetic fibers and are therefore not suitable for cleaning mesh structures.

How to clean a plastic window sill

If a plastic window sill has lost its whiteness or become dirty, it is necessary to take measures to clean it from stains. You can wash yellowed plastic using:

1. Cleaning products. The label must confirm compatibility with the plastic material. It is possible to use alcohol-containing glass cleaners.
2. Washing powder for white. To effectively remove yellow stains, you need to dilute the powder with liquid to a mushy state. Cover the window sill with the mixture and rub with the rough side of the sponge. Old stains should be left for a quarter of an hour. Wipe dry.
3. Soap. Make a very thick soap solution, until it becomes mushy. Clean yellowed plastic with the resulting mixture.
4. Tooth powder, chalk. Dilute 2-3 tbsp. l. with a little water. Apply the thick mixture to the windowsill and rub. Wait 15 minutes, remove the residue with a damp cloth.

Advice! Using the methods listed above, you can wash the frames of plastic and PVC windows. Clean carefully, avoiding contact with glass.

Common Mistakes

Wrong actions can damage the glass.
The desire to quickly put the house in order often causes the appearance of drips and microcracks on the glass. To avoid mistakes, you should listen to these tips:

1. Don’t rush and try to clean the stains with metal brushes or abrasive pastes. Coarse grains of cleaners and hard sponges damage surfaces.
2. Before making a detergent, it is worth finding out how the ingredients combine with each other. Substances can enhance, reduce or neutralize the effects of other components. During the reaction, compounds are sometimes formed that corrode wood, plastic, and rubber seals.
3. Do not pour liquids “on the eye”. When mixing the components, take into account the dosage: excess soap leaves traces that are difficult to wash off.

To ensure that there are no streaks left on the glass, the moisture is blotted with a rag or crumpled paper.

Detergents should be rinsed off thoroughly

Safety regulations

The issue of washing windows at height must be approached with caution. A few general rules:

• When choosing a tool, be guided by your height and the height of the window frame.
• Do not use sharp objects in your work: it is better to soak dried dirt rather than scrape it off.
• Avoid abrasives to avoid scratching the glass. Do not use products containing gasoline, alkali or solvents. Aggressive substances will damage the protective layer on the glass, which blocks ultraviolet radiation and can change the color of the frame.
• If you use chairs or a stepladder, have someone help you.