EcoClean oven cleaning - what is it?
Many modern ovens have a self-cleaning function. Based on the methods that help cope with fat and soot, methods are divided into several types.
Classification and division of cleaning methods:
- Hydrolytic cleaning - Aqua Clean, Easy Clean.
- Catalytic - EcoClean.
- Pyrolytic.
Hydrolytic methods became the initial step towards creating “smart” ovens.
Specifics of the method: fat, carbon deposits are softened due to exposure to steam. All that remains is to wipe the walls. The difference between the Aqua Clean and Easy Clean methods is that in the first method, after steam treatment, the dirt softens and remains in the same place until manual removal. Easy Clean acts on grease with steam based on water and a special product, due to which all dirt settles at the bottom of the cabinet.
In fact, every housewife can create the hydrolysis effect in a regular oven by simply pouring 500 ml of water into a baking tray and turning on the temperature to 90 °C degrees. As in the case of a “smart” oven, it will take 10–15 minutes, but subject to cleaning after each use.
The catalytic cleaning system is a definite breakthrough in cleaning ovens.
External assistance, consisting of manual labor, is required only when cleaning the bottom and door, which do not have a special coating. The coating itself has a rough surface. The system was modernized by converting catalytic enamel panels to ceramic-coated panels - this is how EcoClean cleaning was born.
Distinctive features of catalytic surfaces and surfaces with the EcoClean system:
- Catalysis occurs during every preparation. Ecolyse is recommended for use after each preparation.
- The EcoClean function is responsible not only for the breakdown of fats, but also for the self-healing of the panels, which allows you to increase their service life.
- Removable panels responsible for catalysis are designed for 300 cycles. The eco wedge operates effectively throughout the oven’s service life, which is about 10 years.
The pyrolytic method reduces human participation to good preparation of the area, provision of ventilation and 5 minutes of treatment after exposure.
It involves burning fat and carbon deposits through exposure to high temperatures.
EasyClean - easy cleaning
If we line up all the methods for self-cleaning ovens on a cost scale, then the most affordable will be cabinets whose internal walls are lined with special easy-to-clean enamels or special ceramic coatings.
Here, for example, is the Neff B1644 NO built-in oven with the EasyClean cleaning system (Fig. 1). To clean the cavity of this oven, you need to pour about 40 ml of water on its bottom (Fig. 2, a) and a few drops of a special detergent (Fig. 2, b). Now turn on the oven: within 21 minutes, the dirt will be treated with hot steam (Fig. 2, c), after which it will settle to the bottom of the cabinet (Fig. 2, d). All you have to do is collect them with a cloth (Fig. 2, e) - and your oven will shine clean (Fig. 2, f).
Rice. 1. Neff B1644 NO oven with EasyClean cleaning system
Rice. 2. Cleaning phases for Neff B1644 NO oven with EasyClean cleaning system
But technological progress has already moved further: ovens have appeared that continuously clean themselves. The ecoClean coating used to clean ovens is a true innovation from the BSH concern, marking the beginning of the era of nanotechnology. Surfaces with this coating are cleaned automatically throughout the cooking process, without requiring additional energy costs. But that's not all: ecoClean absorbs up to 80% of all odors, which leads to a noticeable improvement in the atmosphere in the kitchen. The ecoClean coating contains a weightless layer of microscopic ceramic beads that simultaneously break down sediment from the inside and out. The ability of the balls to recover during heating makes their cleaning power almost eternal.
The ecoClean cleaning system is used, for example, in ovens Siemens HE 380560, Siemens HE 365560, Bosch HBN 370650E (Fig. 3), etc. In most models, ecoClean coating is applied to the back wall of the oven, but as an additional option offered by the manufacturer, it can be application to the ceiling and side walls of the oven.
Rice. 3. Bosch HBN 370650E oven with ecoClean cleaning system
In recent years, coatings of this kind have gradually replaced traditional low-temperature cleaning systems based on catalytic panels from the market. This is understandable: the catalytic panel is a consumable material that must be replaced after a certain period of time. For example, the catalytic panels used in Candy ovens have a service life of over 300 hours. Ceramic coatings are designed to last the entire service life of the oven.
However, manufacturers of household appliances are in no hurry to part with traditional cleaning methods. Thus, SATA ovens use a total of four types of self-cleaning, to suit every taste and budget: the EasyClean easy cleaning system based on fine enamel, a catalytic cleaning system with removable panels, the Vetro Clean quick cleaning system based on enamel with a glassy coating and, finally, pyrolytic cleaning system.
Advantages and disadvantages
The catalytic cleaning method is perhaps the most advantageous when compared with hydrolytic and pyrolytic methods. And the EcoClean cleaning system is an improved version of the method, having a special, improved ceramic coating.
Advantages of the system based on comparative characteristics with other “smart” methods:
Energy consumption and time costs:
- The amount of energy consumed is small - up to 270 degrees for 30-40 minutes. Which gives grounds to equate the method with the hydrolytic method in terms of costs - similar duration, but at different temperatures.
- The pyrolytic method is an outsider in terms of energy consumption - the costs significantly exceed the amount of electricity consumed when using the EcoClean system. And if the catalytic system only requires the presence and installation of panels, then for an oven with a pyrolysis function you will have to install a power cable and provide good ventilation.
- All methods, except catalysis, are carried out separately from cooking. But unlike EcoClean, which requires 30-40 minutes, pyrolytic cleaning takes 60-150 minutes.
Versatility - the Aqua, Easy and EcoClean systems are suitable for both electric and gas stoves. During pyrolysis, the temperature level can reach up to 500 °C, so gas ovens of the method are dangerous.
Cost - fat-burning enamel, as well as the EcoClean coating, are included in the middle price segment when compared with the types of ovens under consideration.
Unpleasant odor – EcoClean has the ability to absorb odors. How does it benefit from pyrolysis, which is unthinkable without good ventilation? However, the odor is not completely absent, as is the case with hydrolysis and catalysis. Absorbed up to 80%.
The only disadvantage of the EcoClean system is that it does not completely cover the surfaces of the oven. The defect can be corrected independently using additional removable panels. Missing panels will require manual cleaning on non-equipped parts. In this regard, the pyrolytic method clearly wins, as it burns contaminants to ash - all that remains is to remove the “dust”.
The Ecoclean feature takes catalysis to the next level, increasing service life, safety and efficiency.
How the system works
The EcoClean oven cleaning system is a real breakthrough in the field of nanotechnology. Fatty contaminants that fall on the surface during the cooking process penetrate into the porous structure of the coating. Internal cleaning of the panels does not occur during cooking, since the function starts only at elevated temperatures, not lower than 270 degrees.
Under the influence of temperature and thanks to a specially developed coating containing safe catalysts, fat is broken down, converted into carbon dioxide, water and organic residues. Complete cleaning occurs within 40 minutes, and the cleaning properties of the panels are restored.
Given the important differences regarding service life and coating, it is worth pointing out the external differences between the catalytic cleaning oven and the innovative EcoClean. Eco wedge panels are gray and thinner. Also pay attention to the location of the panels: they can be only on the sides, only on the back, or on the sides and on the back wall. The bottom is very rarely equipped with a function. Since the contaminants that fall down do not belong to the category of fats. Most often this is sugar, splashes of milk - they will have to be washed manually even with an eco-clean.
EcoClean self-cleaning oven back wall - what is it?
Self-cleaning EcoClean is an innovative method that allows you to clean the surface of grease without the use of aggressive chemicals, duration - 30-40 minutes.
You may also have a Bosch oven, and there is an EcoClean Direct system - this is also a kind of self-cleaning system. Maybe she's even the same. But its essence is that when cooking food, contaminants are absorbed into the surface of the oven, and when you cook next time, at high temperature, they will be automatically removed.
Principle of operation:
During cooking, fat gets onto the walls of the oven, penetrating into the very structure of the panels. The cleaning function starts only at temperatures above 270 degrees. The essence is a coating of panels that contains a safe catalyst that can break down fat and convert it into carbon dioxide, water and organic residues. A full cleaning cycle takes up to 40 minutes, after which the panel is again ready for reuse. But it’s better, of course, to read the instructions; each model may have its own characteristics.
No matter what anyone says, even the most modern chemistry remains chemistry, and therefore harmful to health. In ancient times, dishes were generally washed with soda, this is completely safe! although today, of course, this will suit few people))
EcoClean cleaning appeared after the appearance of ceramic coating on the panels. Interestingly, this option even allows you to restore the surface of the panels, which increases their service life. This is some kind of nano-technology.
The EcoClean system can be found in both electric and gas stoves. Another interesting point is that this system can absorb odors up to 80%.
The main disadvantage of EcoClean is the incomplete coverage of the oven surfaces, which can be corrected by installing additional panels. Where there are no panels, you will need to remove them by hand.
Just look at how this cleaning technology works - it’s just a miracle, you don’t need to worry about this cleaning, which simply exhausts all your strength:
I hope this information was useful. Good luck and good luck to you, see you again friends!
To home! 04/16/2021
XL seat on the Pobeda plane - what is it? (difference) SSHD - what is it? (hard drive) What happens if you don’t install the driver for the chipset? GP diode - what is it? (AIDA64) CPU temperature when idle is 50 degrees GPU diode is 70 degrees Is it possible to see in WhatsApp who visited your page? Do I need a driver for my hard drive?
