Indesit washing machines - breakdowns and their elimination

"Indesit" is a well-known brand of household appliances. At the beginning of the twentieth century, a company producing scales, Industrie Merloni, began operating in the Italian city of Fabriano. In 1985, it acquired the Indesit brand, well-known to Europeans. In 2014, she acquired a controlling stake and became the owner of an Italian company.

In the household appliances market of the Russian Federation, the European brand has one of the leading sales positions. Many are attracted by the durability of devices, high performance, and economical consumption of electrical energy. For trouble-free operation during the period of operation, certain rules must be followed.

General rules

Before starting to use the Indesit washing machine, it will be very useful for each owner to study the instructions for it. This document sets out the manufacturer's recommendations on all relevant points. However, if the equipment is purchased second-hand or obtained when moving to a rented apartment, useful recommendations may not be included with it. In this case, you have to figure out how the unit works on your own.

Among the important general rules that must be obeyed are the following.

Turn off the water supply tap when washing is completed. This will reduce wear on the system and extend its service life.
can only be cleaned and maintained when the engine is switched off.
Do not allow children and persons deprived of legal capacity to operate equipment . It may be dangerous.
Place a rubber mat under the machine body. It will reduce vibration and eliminate the need to “catch” the unit throughout the bathroom during the spin cycle. In addition, rubber serves as an insulator against current breakdowns. This does not change the prohibition on touching the product with wet hands, which may result in electrical injury.
The powder compartment can only be pulled out when the washing cycle has completed. There is no need to touch the machine while it is running.
The hatch door can only be opened after it is unlocked automatically. If this does not happen, you should leave the equipment until all washing processes are completed.
There is a “Lock” button on the console. To activate it, you need to press and hold this element until a symbol with a key appears on the panel. You can remove the block by repeating these steps. This mode is intended for parents with children, it protects against accidental pressing of buttons and damage to the machine.
When the machine enters energy saving mode, it automatically turns off after 30 minutes. It will be possible to resume a paused wash after this period of time only through the “ON/OFF” button.

Let's make sure the machine is ready

The first wash will go “like clockwork” if you follow the instructions strictly. Be sure to read the user manual with the basic rules for operating the automatic machine. It is also better to immediately understand the icons on the dashboard by reading what each symbol is responsible for and finding out what modes and options are provided in the washing machine.

After the new washing machine is delivered from the store, you must:

remove the transport bolts;
connect the machine to communications;
level the washing machine;
wipe the inner surface of the drum with a damp cloth;
remove the factory stickers and run a test cycle.

It is important not to forget to unscrew the transport bolts holding the washing machine drum.

Transport bolts are provided to secure the SMA drum. It is important that during transportation the “insides” of the machine do not hit each other. It is forbidden to start the machine with the screws not removed - the engine will spin the stationary “centrifuge”, it will resist, so not only the container itself will suffer, but also the bearings, shock absorbers and other elements.

The instructions tell you how to properly remove the transport bolts. Their number and location on a specific Indesit model are also indicated there. After removing the screws, special plugs that come with the washing machine are inserted into the holes.

If you run the first wash without removing the shipping bolts, you can’t count on warranty repairs. Since the breakdown occurs due to user negligence, the service center will refuse free service.

The next step is installing the washing machine. Ideally, specialists should handle the connection. It is important to level the housing, position the drain hose correctly, connect the device to the communications, and securely fasten the clamps to the pipes. The machine will vibrate during operation, and a loose connection may cause a leak.

After installation, you need to clean the washer drum with a damp cloth. Dust and dirt are also removed from the body of the machine. Carefully remove all stickers provided by the manufacturer. Then the machine is wiped dry.

The washing machine is now ready for its first wash. Of course, it’s too early to load things into the machine. To begin with, a technical launch is carried out. Let's tell you what it is and why it is needed.

Connection rules

After purchase and transportation, the washing machine is unpacked and installed. Before connecting, you should read the operating instructions, which come complete with a warranty card for service in case of breakdown and a receipt confirming the fact of purchase. The user manual describes in detail the main points that explain how to use the Indesit washing machine for trouble-free operation.

Before installation, be sure to remove the transportation bolts. Level the washing machine as follows: twist the legs under the front of the device for a stable position. This will prevent noise and vibration during spinning.

The drain hose must not be kinked. The drain hole is installed at a height of sixty-five to one hundred centimeters above the floor. Dirty water should drain freely and the end of the hose should not go into the water.

The socket into which the washing machine is plugged in is grounded. The plug must match the type of outlet. It is not recommended to touch wet parts of an electrical appliance that is plugged in: electric shock may occur.

Useful tips on the operation of washing appliances

In order for the Indesit washing machine to serve for a long time, you should adhere to some rules:

Do not overload the drum.
It is recommended to use the type of detergent indicated on the clothing label. It is forbidden to add hair shampoo or hand washing powder - excessive foam can damage the device.
Be sure to maintain a temperature that matches the composition of the fabric. Otherwise, the item may become unsuitable for wear, lose color and shape.
If loud sounds or strong vibrations occur during the spin process, you should, if possible, stop the cycle and set the machine level. An incorrectly adjusted device may break due to strong vibrations.

Before using the Indesit washing machine regularly, it is recommended that you read the operating instructions. Early models are distinguished by ease of operation and high build quality. Many washing devices, according to customer reviews, have been working for more than ten years. The disadvantages of old machines are the absence of sound at the end of the wash and the absence of an electronic display indicating the end of the operating time.

Current models have a number of modern functions: “Easy ironing”, “Jeans”, “Children’s clothing”. To reduce the consumption of water, electricity, detergents, as well as personal time, it is worth choosing devices with economical washing.

Regardless of the year of manufacture, it is important to know how to use the Indesit automatic washing machine correctly. This will save time and money due to the longevity of the device and the absence of breakdowns during operation.

First wash

Before using the Indesit washing machine constantly, you should run the first wash cycle. To do this, you need to pour washing powder into a special tray, set the maximum temperature to 90 degrees, without adding laundry. This will remove any possible unpleasant smell from plastic, rubber, or metal components.

Products and their use

The detergents used in the washing machine for cleaning clothes, removing stains, and conditioning are not poured into the tank, but into special dispensers. They are placed in a single pull-out tray on the front panel of the machine.

It is important to remember that for washing in automatic machines only products with reduced foaming are used, which are marked accordingly (image of the unit body).

The powder compartment is located on the right side of the washing machine, closer to the front panel of the tray. It is poured according to the recommendations for each type of fabric. You can also pour liquid concentrate here. Additives are placed in a special dispenser to the left of the powder tray. Fill fabric softener to the level indicated on the container.

Indesit washing machine: instructions for models

421W
461W
2067W
421XW
2296XW
ITW D 71252
ITW A 5852 W
IWB 5105
IWB 6085
IWB 6105
IWC 6105
IWC B 6105
IWD 5085
IWD 6105SL
IWDC 6105
IWE 6105
IWE B 6105
IWSB 5085
IWSB 5093
IWSB 5105
IWSB 6105
IWSC 4085
IWSC 4105
IWSC 5085
IWSC 5105
IWSC 6085
IWSC 6105
IWSD 5085
IWSD 5105

IWSD 6105
IWSD 6105 B
IWSD 6105 BL
IWSE 5105
IWSE 6105
IWSE 6105 BL
IWUB 4085
IWUB 4105
IWUC 4085
IWUC 4105
IWUD 4085
IWUD 4105
IWUE 4105
NWS 6105
NWS GR 6105
NWU 5105
NWUK 5105
XWA 71483X
W43T
W63T
W81
W83T
W84TX
W101
W104T
W105TX
W642TX
WDN 2067
WDN867W

WDN2296XWU
WDS 1040TX
WG421
WG421TP
WG421TX
WG633TX
WG824TP
WG835TXC
WG 1031 TP
WGD834T
WGD1236TX
WGS834TX
WGS838TX
WGT637T
WI 81
WI 101
WIA 82
WIA 101
WIA 102
WIDL 86
WIDL 106
WIE 107
WIL 82
WIL 83
WIL 85
WIL 102
WIL 103
WIL 105
WIN 82

WIN 102
WISA 101
WISE 8
WISE 10
WISE 107X
WISL 62
WISL 82
WISL 83
WISL 85
WISL 86
WISL 92
WISL 101
WISL 102
WISL 103
WISL 104
WISL 105
WISL 105X
WISN 81
WISN 82
WISN 100
WISN 101
WISN 821
WIT 60
WITE 107
WITE 1077
WITL 86
WITL 106
WITL 867
WITP 82

WITP 83
WITP 1021
WIU 81
WIU 82
WIU 100
WIU 102
WIUE 10
WIUL 83
WIUL 103
WIUN 81
WIUN 82
WIUN 83
WIUN 100
WIUN 102
WIUN 103
WIUN 104
WIUN 105
WN 421 WU
WN421XWU
WN 461 WU
WS84TX
WS105TX
WS630TX
WS84TX
WT80
WT100

Model range of Indesit washing machines

The Indesit model range includes more than 120 types of machines.

The best Indesit models for 2022:

Indesit IWUE 4105.
Indesit ITW A 5851 W.
Indesit BWSA 71052 L B.
Indesit ITW D 51052 W.
Indesit IWUB 4085.
Indesit IWSB 5085.
Indesit IWUC 4105.

Let's look at some of them.

Indesit IWUE 4105

The machine is compact, designed for a load of 4 kg. Accordingly, it does not consume a lot of electricity and water (39 liters per cycle). The design is minimalistic and stylish. The interface is very clear. The presence of 16 main programs, including special modes for washing sports shoes, jeans, and synthetics. Display showing operating mode. Timer, delay, easy ironing mode, etc. The price for this model is very affordable, which is why it is very popular.

Washing machine Indesit IWUE 4105.

Dimensions: 60x33x85 cm

Weight: 55 kg.

Price: from 16,100 rubles.

Indesit ITW A 5851 W

Device with a vertical loading mechanism. The model is compact and holds 5 kg of laundry. 14 main program modes. There are also 4 quick wash modes. Additional functions: easy ironing and spinning, which reduces wrinkles. And all this at an affordable price.

Washing machine Indesit ITW A 5851 W.

Dimensions: 40x60x85 cm

Weight: 50 kg.

Price: from 17,000 rubles.

Buttons and selectors

First, let's look at the main elements located on the control panel.

The following elements are available on any model of Indesit washing equipment:

Program switch selector. It is the most important element of the control panel. It allows you to select the desired washing mode by turning the knob.
Temperature selector. The control module independently sets the water temperature after selecting the washing mode. They also set the rotation speed of the drum. However, these values can be changed using the temperature selector.
Speed regulator. Allows you to change the rotation speed of the washing machine drum.
On/off button. It is available on all Indesit brand washing equipment. Required to activate and deactivate the machine.

Indesit machines may have the following additional buttons:

Half load. This button is used when you need to wash a small amount of laundry. It saves energy and water.
Reduced load of laundry. This button is completely similar to the previous one and performs the same functions.
Reducing the spin speed. This button usually displays a spinning laundry icon. Reducing the spin speed of laundry is required when washing linen and cotton items.
Powerful rinse. The button contains the inscription “Extra Spulen”. This button is very useful when washing fabrics that require a large amount of water for rinsing.
Cold wash. Used when washing lightly soiled clothes or delicate fabrics. When you press this button, the washing process starts without heating the water.
600C mode. When this button is pressed, the water does not heat up above 600C during the washing process.
Spin off button. It contains the inscription "EXCLUSION CENTRIFUGADO". After pressing this button, the laundry spin is switched off.
A button that, when pressed, stops the washing machine with water. This button shows a shirt submerged in water.

If previously an automatic machine was considered a luxury, now it is found in almost every home. At the same time, new, more advanced models are constantly being produced that make the dreams of the most demanding housewives come true.

Program selection and other settings

Old-style Indesit washing machines do not have touch controls or a color display. This is an analogue technique with completely manual control, in which it is impossible to reset an already set program until the end of the washing cycle. The choice of programs here is as simplified as possible; for temperature there is a separate lever that rotates clockwise.

All modes are displayed on the front panel along with prompts - the numbers indicate standard, special, sport (even shoes can be washed). Switching occurs by rotating the selector switch, setting its pointer to the desired position. If a ready-made program is selected, you can additionally set the following functions:

delayed start;
rinsing;
spinning laundry (not recommended for all types);
if available, makes ironing easier.

If you wish, you can independently set the desired washing program for cotton fabrics, synthetics, silk, and wool. If the model does not have such a distinction between types of materials, you will have to choose among the following options:

express processing of lightly soiled items;
daily washing;
pre-soaking at low rotation speeds;
intensive processing of flax and cotton at temperatures up to 95 degrees;
delicate care for stretchy, thin and light fabrics;
denim care;
sportswear for clothing;
for shoes (sneakers, tennis shoes).

Selecting the correct program in the new Indesit automatic machine is easy and quick. You can configure all the necessary options in several steps. Using the rotating knob on the front panel, you can select a program with the desired washing temperature and spin speed, the display will show parameters that can be changed, and show the duration of the cycle. By pressing the touch screen you can assign additional functions (up to 3 at a time).

All programs are divided into daily, standard and special.

In addition, you can set combinations of rinsing and spinning, draining, and combining these actions. To start the selected program, just press the “Start/Pause” button. The hatch will be blocked and water will begin to flow into the tank. At the end of the program, END appears on the display. After unlocking the hatch, the laundry can be removed.

To cancel a program already running, you can reset it while the wash is in progress. In newer machines, the “Start/Pause” button is used for this. Correct transition to this mode will be accompanied by the drum stopping and the indication changing to orange. After this, you can select a new cycle, and then unpause the technique by starting it. You can only remove anything from the car when the hatch door is unlocked - the lock icon on the display should go out.

Additional washing functions help make the machine even more functional.

Delayed start with 24 hour timer.
Fast mode . When pressed 1 time, the cycle starts for 45 minutes, when pressed 2 – for 60 minutes, when pressed 3 – for 20 minutes.
Stains. You can specify what type of contaminants are to be removed - from food and drinks, soil and grass, grease, ink, foundation and other cosmetics. The duration of a given wash cycle depends on the choice.

Errors (on screen) and what to do about them?

Modern Indesit models display fault information on the display in the form of a digital code. This self-diagnosis system greatly facilitates the process of restoring the functionality of household appliances.

Decoding error codes for Indesit washing machines:

F01 - signal that there is no engine rotation. It is necessary to check the voltage in the network, test the motor winding and tachometer.
F02 - signals that the drum rotation is blocked. It is necessary to check the motor brushes, electric motor contacts, tachometer, and control module.
F03 - indicates the absence of a signal from the water temperature sensor. Diagnosis or replacement of the sensor is required.
F04 - signal about a malfunction of the pressure switch. Most often, the problem is solved by cleaning the filters and the water drainage channel (in especially severe cases, the drain pump must be replaced).
F05 - signal about problems with drainage. The drain filter needs to be cleaned and the drain pump needs to be diagnosed.
F06 - problem with control buttons. It is necessary to check the button contacts.
F07 - signal of lack of heating of water in the tank. The control module needs to be checked.
F08 - appears when the heating element malfunctions. The problem can be solved by replacing the heating element.
F09 - signals a failure in the control module. The machine may turn off a few minutes after the wash starts and interrupt the process at any time. In such a situation, professional diagnostics of the control module is required.
F10 - signal that the tank is not filled with water. The pressure switch needs to be replaced.
F11—indicates a malfunction of the drain pump. The faulty element needs to be replaced.
F12 - occurs when there is no connection between the display module and the power module. A professional diagnosis by a technician is required.
F13,14,15 - drying fan is faulty. Diagnostics and possible replacement of the faulty element is required.
F16 (displayed only on the display of top-loading washing machines) - the error is due to a breakdown of the device that fixes the movement of the drum.
F17 - signal about a malfunction in the hatch locking device.
F18 - loss of communication between the microprocessor and the digital signal processing device. The corresponding board needs to be replaced.
F20 - a signal about problems with water (insufficient or, on the contrary, over-filled tank). The fill valve filter needs to be checked.

What does error H20 mean for an Indesit washing machine can be found here.

The body must be level

It is important not only to install the Indesit machine, but also to align it with the floor. This is the only way the machine will be stable, which will eliminate strong vibration, knocking and “jumping” around the room. If you ignore this step, even automatic imbalance control will not save you, and the unit will break down faster and require repair.

Leveling occurs with the help of adjustable legs, making straight lines possible even on curved floors. The fitting process looks like this:

put the building level on top of the washing machine and, using it as a guide, unscrew or screw in the legs;
we lower our hands to the corners and slowly pump the equipment (if there is no vibration or strong rocking, everything was done correctly, otherwise, we go back and repeat the adjustment);
tighten the fixing nuts on the legs using a suitable wrench.

The best test is to start the mode at maximum spin. Even at high speeds, the unit should not move independently in space. Special vibration-smoothing attachments, which are sold in service stores and supermarkets, will also come in handy.

Why doesn't my Indesit washing machine wash?

Reasons why the Indesit washing machine

may be different. This includes the owners’ careless attitude towards equipment, manufacturing defects, power surges in the electrical network, as well as wear and tear of parts over time.

Interesting materials:

Why does sand-lime brick collapse? Why is the lawn thinning? Why Margelan radish? Why is it recommended to bury foliage? Why Revit and not Archicad? Why does mercury separate in a thermometer? Why does fish become sour after smoking? Why a subwoofer? Why does my Samsung TV turn on by itself? Why does Samsung turn itself off?

Proper use of spin

You can turn on the spin cycle on the LC washing machine and other models in the simplest way. All these capabilities are provided to us by automatic control.

So let's begin:

First of all, we place the laundry in the drum according to its volume. Overload and shortage are excluded. There may be a software error.
Next, close the hatch door tightly.
The toggle switch handle comes into play, the spin option is included.
We press the button with the choice of speed mode, where it is necessary to set the expected number of turns.
We start the starting process.

Important! If suddenly there is a need to change the speed limit, then this can be done. The software allows you to use spin at high speeds, while having a limitation on low speeds.

Preparing for disassembly

First of all, we choose the place where the car will be disassembled. There must be enough space to carry out the work and to allow the dismantled parts of the machine to be neatly laid out. After all, we still need to put it back together.

It would be best to write down all the steps involved in disassembling the car. Then the reverse process will be easier and without errors.

We will need:

Set of different screwdrivers. A pair of crosses of different lengths. Flathead screwdriver. It will be needed in order to pry off various clamps and fasteners. Screwdriver with a set of bits - hexagons and stars.
Hammer. Will be needed if bearings need to be replaced.
Pliers.
A set of keys.
A block of wood.

How to set the desired mode?

The selection is made using the programmer knob. There are inscriptions and icons around the selector switch. On older models there are no verbal designations - only icons, hence the problems with choice. It happens that the owners of the machines do not understand the images, then they need instructions to decipher the symbols. In the new models, the manufacturer took this omission into account - all icons are duplicated with words.

Before you set the mode, you need to sort the things that you are going to wash. Evaluate them by type of fabric, color, degree of soiling. Taking these positions into account, a decision is made: choose a ready-made program or customize your own. If preference falls on the second option, then the user selects:

temperature;
duration of the process;
rotational speed.

Whether a ready-made program is included or your own is being configured, the user can add additionally:

soak;
rinsing;
light ironing;
spin

The process can be delayed for a certain time, depending on the duration of the timer. Typically, the maximum delayed start time is 24 hours. Descriptions of the modes can be read in the instructions.

How not to load the drum more than necessary

In the same instruction manual, which you have not yet let go of, there is data on the number of things per load. Weight is usually indicated.

Did you know? If the technical specifications say “5 kg”, this is calculated for 5 kilograms of wet things, not dry! Therefore, weighing everything down to the gram does not make much sense.

Cotton items for one full load fill the space completely. Just don’t push and compact! Put it in, fill the drum - and you're done.
Products made from synthetics fill the space by half (also without effort when laying).
Wool products need special care, including in terms of quantity: one full load of wool is a third of the drum.

The main rule is that it should be free inside, nothing can be pushed in. This, firstly, will keep the machine healthy, and secondly, it will allow it to wash perfectly!

You might also be interested in:

How to peel a pomegranate quickly and correctly

Checking readiness

The next step is a series of procedures designed to make sure that all connections are made correctly and the machine can be used for its intended purpose.

Check that all transport bolts have been removed. This is important, since during operation the washing machine will vibrate, and these elements will damage the floor covering, nearby surfaces and some parts of the unit itself.
Read the instructions. After all, working with different models is different. New generation machines have “intelligence” (for example, Bosch, Samsung, Electrolux), and an illiterate approach can turn into a disaster in the form of a breakdown or a banal failure - you won’t even be able to start the wash. By neglecting this rule, you can damage the device with even basic actions.
Make sure that all water supply and drainage hoses are connected to the appropriate communication pipes. It often happens that the location of the machine will still change, or it is located far from the sewer. In this case, the corrugated tube is hung on the edge of a sink, bathtub or other container with a drain.
When the water supply tap is located near the junction of the water supply with the rubber hose of the machine, and it was closed when connecting, it needs to be opened.
Look into the drum and check for foreign objects.

To avoid problems during further use, after completing all the steps, you need to carry out the starting start correctly.

Important: such preparation is relevant for a unit of any brand, be it ARDO, Ariston, Atlant, Beko or LG.

Features of the work of SMA "Indesit"

When using Indesit washing machines, follow these rules:

Please note the maximum permissible drum load.
Sort your laundry by color, type of fabric, color fastness and presence of decor (embroidery, beads, rhinestones, etc.). The presence of decorative decorations is a reason to use special bags.
Read the labels on things - what is allowed and what is prohibited for a particular product.
Check your pockets - this will prevent damage to the SMA.
Turn sweaters, shirts and other clothes inside out - this will improve the quality of washing.
It is forbidden to wash many large items at the same time so as not to disturb the balance of the drum.
When pressing the “start” button, make sure that the device is turned on.
When choosing a mode, turn the selector to the desired position. If necessary, adjust the process parameters using special switches. After adjusting the software settings, start the device.

Emergency situations

There are times when the machine door does not open either after draining the water or after stopping the program.

If possible, call a technician who can diagnose and open the washing machine.

Otherwise, you will have to force open it yourself. Several methods are known.

Using an emergency opening cable. It is located in front behind the panel at the bottom of the car. The cable is usually orange. To open the door, simply pull it.
Door opening thanks to a thin cord. Take a cord in accordance with the circumference of the hatch, maybe a little longer. You need to put a thread between the body and the hatch. Pull it until it presses against the latch. Failure may occur if the lock is of a different design.
You can use a spatula. It is inserted between the door and the body and pressed onto the latch.
A universal way to open any machine. To open the lock using this method, you will have to remove the top cover by unscrewing the bolts. The lid moves back and the door latch is pressed by hand.

Having this information, you can open the machine in any situation, but if you have doubts about your abilities, it is better to contact a specialist.

Caring for the machine

With regular use, the outside of the unit body and the inside of the centrifuge should be cleaned. It is not necessary to wipe the latter dry; just opening the door is enough for the drum to dry. In this case, do not use aggressive chlorine-based products.

In addition to moisture, small debris, threads and other contaminants accumulate under the rubber seal, which also need to be gotten rid of. Otherwise, mold may appear.

We must not forget about the drain filter, in which debris usually accumulates. Fallen buttons, buttons, a bus ticket forgotten in your pocket, and other little things will be found in this department.

Important: do not overload the drum, as increased load will lead to rapid wear of parts.

It is wrong to choose a detergent based only on the type of clothes. Water hardness should be taken into account. If you ignore this factor, you will have to frequently change the heating element, which will fail due to scale. If you don’t want to spend money on an expensive cleaning product, there are special substances that are added to a simple powder to care for the heating element.

Installation of a new washing machine, carried out in accordance with all the rules, will repay the efforts expended on it in the future with the stable performance of the unit. If you treat smart technology with care, it will serve its owner for a long time.