What to do if water gets into your headphones

remove water from the headphones. If water gets into the headphones, prompt action must be taken. In most cases, the device can be restored while maintaining functionality and sound quality. If the device falls into a bathtub, puddle or toilet, first of all, you need to quickly remove the headphones from the water. A mandatory step after removal is to disconnect the device. The headphones themselves should be pulled out of the connector. The next step is to remove moisture. This procedure must be carried out on weight.

First steps if the headphones get into water

If water gets into the headphones, prompt action must be taken. In most cases, the device can be restored while maintaining functionality and sound quality.

If the device falls into a bathtub, puddle or toilet, first of all, you need to quickly remove the headphones from the water. A mandatory step after removal is to disconnect the device. The headphones themselves should be pulled out of the connector.

The next step is to remove moisture. This procedure must be carried out on weight. The wire is carefully straightened, the ear holes are directed downwards. The headphones need to be gently shaken to remove any excess liquid trapped inside the case. The surface itself should be thoroughly wiped to collect water. A soft absorbent material is suitable for this. This can be a flannel or terry rag, a multi-layer paper towel.

Drying the accessory

An important point is drying the headphones. Experts recommend drying the accessory in a disassembled state, as this will facilitate complete removal of water. It is very difficult to cope with such an operation without the appropriate skills. It should also be noted that not every headset can be disassembled.

If the device can be disassembled, each component is thoroughly wiped with paper or a soft absorbent cloth. The membrane must be carefully inspected under bright light. Water stains can negatively affect sound quality. Cracking or noise will appear, and the volume quality may decrease significantly.

If there are streaks or drops, the surface should be carefully wiped with soft paper. Actions must be careful, as sudden movements or strong pressure will lead to failure of the product.

ATTENTION! You should avoid using a hair dryer, as the air flow can dry out the inner membrane. This will cause sound distortion when used.

After carrying out the above steps, the headset parts should be left for several days. The headphones can be placed on a rag or paper towel and turned over periodically. The paper will absorb any remaining moisture that has penetrated deep into the device.

REFERENCE! In order to speed up the process, the headphones can be placed near the battery. For example, put them on the windowsill. Smooth waves of warm air will have a positive effect on the result.

If it is not possible to disassemble, the membrane can be seriously damaged by water stains. It all depends on the speed of action after moisture enters and the quality of drying.

If the headphones have been dropped into food or washed, disassembly is necessary. All components should be washed thoroughly to remove any food or detergent residue. Drying is carried out using a similar method.

Drying disassembled headphones

Let's consider the situation if you were lucky enough to disassemble the headset. This is an ideal option for completely drying each part. They are carefully wiped with a napkin and laid out in a warm place. There is no need to rush with a hairdryer. The air flow will dry out the membrane. Let it dry better naturally.

When all the parts are dry, the speakers are brought out into the light and the membrane is inspected. The purpose of the procedure is to identify water stains. They will greatly distort the sound of the speakers. You can remove stains with a damp cloth, but you must act carefully so as not to damage the membrane.

If the headset fell into tea, soup, or was simply washed, you cannot do without disassembling it. There is nothing left to lose. All parts are washed with clean water, wiped with a napkin and laid out to dry. It is unlikely that after such a procedure high-quality sound will appear, but before purchasing a new headset you will have to use what you have.

What to do with the headphone jack if water gets into it

In most cases, when headphones are damaged, water gets onto the player or phone. The device must be immediately removed from the water and the battery removed. Remove all stains and drops from the surface, and thoroughly wipe the body itself. A paper or soft towel is useful for this. The device can be shaken several times so that any drops that fall inside end up on the surface of the case.

Drying also takes several days. During this period, it is prohibited to turn on the device, insert the battery, charger or headphones. It is better to refrain from cleaning ports with cotton swabs. Cotton wool may remain inside the connectors, and hard parts will damage the contacts.

A hairdryer is useful to remove water inside the case. The household appliance should be connected at minimum speed. Collect excess moisture with paper or cloth. After all operations, the device should be left for at least three days until completely dry.

Moisture can cause oxidation of the connector contacts. Alcohol is suitable for removing plaque. When working, it is better to abandon cotton wool and use a bandage. A thin wooden stick will be useful as a rod. The material should be selected with optimal thickness so that the finished instrument can be freely inserted and removed from the connector.

You need to wrap several layers of bandage around the base of the stick and dip it in alcohol. The excess must be carefully squeezed out so that no moisture remains inside. After thorough treatment, leave the device until completely dry.

ATTENTION! A hairdryer is useful to speed up the process.

After all operations have been completed, you can check the phone or player for functionality. The battery is inserted into the socket, the device itself turns on. You can also immediately check your headphones. If, after connecting, the device does not recognize the headset, consult a specialist.

Headphones are a must-have addition when purchasing a mobile device or mp3 player. If the product gets wet, its functionality may be significantly impaired. Following the recommendations and taking timely actions will help resolve the problem.

What to do with the connector of an electronic device if it gets wet

It is known from practice that if headphones fall into water, then the phone or player flies after them. An electronic device pulled out in time will not have time to deteriorate, but water will get into the connector. The following measures are taken for rescue:

Recommendations: 5 Best Waterproof Headphones

How to protect headphones from mechanical damage and strengthen the wire

, How to properly wear in-ear headphones

After the drying procedure is completed, the battery is returned to the electronic device. If everything is normal with the contacts inside the connector, after connecting the plug and starting a music file, sound will be heard from the speakers.

Failed drying of the connector on a mobile phone is determined by two criteria:

The last problem often occurs on iPhones after swimming in a puddle. There are no other options. The contacts are badly damaged and the entire connector needs to be replaced.

You can save wet headphones with an electronic device if you take them out of the water in time and dry them. The main thing is not to panic and follow the recommendations exactly.

Thematic materials: Independent production of simple headphones and a headset with a microphone

4 Best Headphones for Swimming

, Harm from headphones: impact on human hearing

How to disable Headphones mode on iPhone

, How to clean headphones

, How to disassemble headphones: instructions with step-by-step photos of repairing all elements of the headset

How to fix headphones yourself if one stops working

, How to connect broken headphone wires

, DIY headphone repair

Source

First steps if the headphones get into water

Headphones make the use of a mobile device more comfortable, and they are a necessary component in the player. If used carelessly or in unfavorable weather conditions, the device may become exposed to large amounts of moisture. With timely and correct measures, the problem can be easily eliminated.

What to do if your headphones fall into water?

If your headphones fall into water or get water in them, first of all you need to:

Get them out of the water and out of the device as soon as possible.
Try to lightly shake the water out of them (just don’t overdo it with shaking, otherwise water in the headphones will not be your only problem :-)) and blot with any well-absorbent material - a napkin, towel, toilet paper, as long as it absorbs moisture well.
Dry them thoroughly. Of course, it is advisable to disassemble them before drying, but, alas, this is not so easy to do with all headphones. If you still decide to disassemble them, then our article on how to disassemble different types of headphones will help you! You can dry them on a warm radiator, but it is advisable to place them on a napkin so that it absorbs the moisture that evaporates during the drying process. You can also dry them with a warm hairdryer (they can melt when hot) or by placing them on an absorbent napkin. The time will depend on the drying method (from several hours to several days).

If you decide to disassemble the headphones and dry them disassembled, and after drying you find stains on the membrane, then you can try to gently wipe the stains with water (with a damp cloth), but be careful not to damage the membrane (better, of course, than this don’t do it, but accept the consequences)! The sound quality will depend on the presence of stains. Alas, if they are left after drying, the sound may not be as good as before, but nothing can be done about it.
If you dropped your headphones in tea or any other liquid or accidentally washed them, causing the headphones to stop working completely, then just try rinsing them gently under water and then drying them thoroughly (you still have nothing to lose).

First aid

The first thing you should do when you find headphones in washable items is to reduce, if possible, the time the device is in contact with water. When washing by hand, this is quite easy to do right away. If washing is done in a washing machine, you will have to wait until the cycle ends.

Next you should proceed according to the following algorithm:

Remove the device from wet clothes or bags as soon as possible;
Disassemble the headset into its component parts. Wipe the parts with any material that absorbs moisture: a napkin, toilet paper, a piece of cloth;
Dry the device with warm air using a hairdryer. It is important to ensure that the temperature of the blown air is adequate. Otherwise, there is a risk that the hot wind will not only dry out the drops, but also melt the parts;
Place the unassembled headphones in a dry, warm place. For example, next to the battery, or on the battery itself, after spreading a sheet of paper or a moisture-absorbing napkin;
Leave the headphones for 3-5 days until completely dry.

ATTENTION! Under no circumstances should you turn on a wet device. Even minimal traces of moisture can cause an electrical short, after which the headphones will no longer be repairable.

Dry headphones should be carefully inspected in the light. If there are stains left from the powder or water, wipe with a small piece of bandage soaked in alcohol. It is better not to use cotton wool or napkins for this: after that, lint may become clogged in the parts of the headphones.

If for some reason the headphones cannot be disassembled, they will have to be dried for at least a week.

IMPORTANT! Under no circumstances should you pick the headphones with a toothpick, needle, pin or paper clip. This can permanently damage fragile speakers.

Has a similar problem ever happened to you?
Not really

drying methods

If the incident with the headphones happened in the summer and the heating is turned off, you will not be able to use the battery for quick drying.

In this case, you can resort to the following methods:

Dry the headset in natural conditions. The room should be dry and warm. It is not recommended to leave headphones in the bathroom.
Read also: How to remove wine stains from carpet with cheap products?
Place the device in the sun. It must first be disassembled.
Use a fan. The headset is mounted in such a way that it is exposed to air currents at all times. The device must remain in this position for at least 3 hours.
Bury in rice. This cereal perfectly absorbs moisture. To get her to pull it out of the device, it is completely immersed in a bag of rice and left for 12 hours. Before doing this, you need to thoroughly shake the headset and wipe it with a dry cloth.
Treat disassembled headphones with VD-40 spray. This universal lubricant costs about 170 rubles and effectively displaces moisture. After applying the spray, the device is left to dry the headphones for 1-2 days.

The quality of their sound depends on how quickly the headphones dry. The longer the water remains inside, the higher the risk that the winding will begin to rot. If after drying the device does not turn on and does not make any sounds, or only one side works, it is possible that the wires have been broken.

Sometimes headphones work, but distort the melody, play quietly, or wheeze. Most likely, the reason lies in the washing powder that remained inside the speaker.

Here's some unusual advice:

pour vodka or technical alcohol into a suitable container;
lower the device into it;
turn on the music;
After 10 minutes, remove the headset.

When the headphones are completely dry, they are checked for functionality. Surprisingly, sometimes this method really helps. Alcohol dissolves the powder, which normalizes the sound. You should try this method only if you have nothing to lose and have to buy a new headset.

How to dry the charger?

Do not blow dry, do not put in rice, it is not necessary. You can try to gently blot the connector with a cotton pad, soft paper like toilet paper, or a cotton swab. If you urgently need to charge, well, alas, you will have to wait several hours in any case.

Interesting materials:

What does forever mean? What does at all intersections mean? What do you mean just in case? What does takeaway mean? What does it mean that Wildberries are not expecting deliveries in the near future? What does hat mean in slang? What does tone dialing mean? What does it mean that the dialed number is not serviced by Vodafone? What does long term mean? What does the inscription on the radio tape recorder TA mean?

Features of wireless recovery

If wireless headphones have been washed, they are restored like a regular wired headset.
The device is disassembled, all removable elements must dry separately. The situation is aggravated by the fact that not only the speaker itself can suffer, but also the source of the signal: Wi-Fi or Bluetooth. Therefore, it is necessary to remove water from them especially carefully.

At the same time, a wireless headset is a more modern device, so manufacturers often provide it with a waterproof membrane. It is able to protect the device from short-term contact with moisture.

Why doesn't one earphone work?

The problem is resolved by reinstalling the necessary driver, which is included when purchasing the device. If 1 earphone works

, this may occur due to a broken connection cable. Clogging with sulfur, debris, and dust can also cause it to break or cause poor sound output.

Interesting materials:

Why are earplugs dangerous for sleeping? Why are earplugs dangerous? How to open XLSB on Mac? How to open and edit PDF? How to open ZIP on Mac? What is the difference between 802.11 n and 802.11 g? What is the difference between iPad 2020 and 2022? What is the difference between Apple Pencil 1 and 2? What is the difference between a contract and an offer agreement? What is the difference between Dolby Digital and Dolby Digital?

Drying the accessory

If there are streaks or drops, the surface should be carefully wiped with soft paper. Actions must be careful, as sudden movements or strong pressure will lead to failure of the product.

ATTENTION! You should avoid using a hair dryer, as the air flow can dry out the inner membrane. This will cause sound distortion when used.

REFERENCE! In order to speed up the process, the headphones can be placed near the battery. For example, put them on the windowsill. Smooth waves of warm air will have a positive effect on the result.

If it is not possible to disassemble, the membrane can be seriously damaged by water stains. It all depends on the speed of action after moisture enters and the quality of drying.

Why is this dangerous?

The advantages of headphones include their small size and weight, as well as ease of use and a rich set of additional functions. To implement all these options, engineers have to use miniature sound-reproducing capsules with thin sensitive membranes, as well as electronic circuit boards with many microscopic parts. For all these elements, exposure to liquids that get inside is critical. Even clean water, once inside the headphones, can cause electrical contacts to short-circuit and also disrupt the normal operation of the membrane. If the owner drops the device not just into fresh or rainwater, but into sea water, a negative impact, alas, is inevitable. Equally devastating would be a situation where wireless headphones fall into chlorinated pool water or end up in a glass of drink. Chemicals contained in the liquid can irreversibly short-circuit electronics and damage insulation.

Repair

It makes sense to send headphones for repair if they are expensive.
A cheap wired headset for 200-500 rubles is easier to replace with a new one. You need to take the device to a workshop if the headphones work, but with sound distortion. Before agreeing to a diagnosis, you need to check with the specialist about its cost. Some service centers charge about 600 rubles just for the process of detecting a fault.

The technician needs to be informed that the device has been washed. Before signing an agreement for repair work, you need to clarify how effective they will be and their approximate cost.

You need to agree with a specialist so that after opening the device and discovering the cause of the malfunction, he calls the owner and informs him of the price for the services provided. After this, you can decide whether the headphones are worth the money spent on repairs or whether it’s easier to buy new ones.

Depending on the city and the specific service center, the cost of repairs will vary. The average price range is as follows:

replacing 1 speaker – about 1000 rubles;
cable restoration - about 500 rubles;
replacing a Bluetooth module - about 1,500 rubles;
iPhone headset repair – from 2500 rubles.

The price may increase depending on the urgency of the work performed.

An unusual way to “save” headphones

Despite the fact that AirPods are afraid of water, there is one non-trivial way to get rid of liquid that gets inside the headphones.

So, what should you do if water gets into your AirPods?

The essence of this method is to use sound waves and the Quick Commands application. The procedure is as follows:

Install the Shortcuts app if you don't have it on your iPhone;

Follow the link - https://idevicehelp.tech/siri-shortcuts/ and click on the Get Shortcut button there, then “Get shortcut” and “Download shortcut”;

Connect AirPods to iPhone;
Close all sensors and openings except the speakers;
Launch the Shortcuts app and activate Water Eject. Repeat this step until all the liquid is out.

This method can help you out if your AirPods fall into water, but at the same time show signs of life and are synchronized with your smartphone.

How to clean a headphone jack

In the example, let's look at a method for cleaning a mini-jack with a 3.5 mm hole.
In order to achieve results, you should adhere to the following sequence of actions: Thus, you should repeat the manipulations until the cotton wool is clean.

REFERENCE! If necessary, it can be changed. In addition to this method, there is another:

Therefore, as in the first and second methods, it is worth doing all the steps as carefully and carefully as possible.

Brief summary

It is worth repeating that the manufacturer himself recommends avoiding contact with moisture. If an accident does occur and your AirPods fall into water or get seriously wet in the rain, then use microfiber and try to dry the device quickly. Apple headphones are not very repairable, so be careful!

10 Helpful Tips for New AirPods Users

How to choose headphones

The most common problems with wireless headphones and how to solve them

Apple AirPods: 17 popular questions and answers

Comparison Huawei FreeBuds 2 Pro vs Apple AirPods 2

Review of Huawei FreeBuds Lite headphones

How to distinguish a copy of AirPods Pro from the original

How to connect Apple AirPods wireless headphones to Android smartphones

How to properly clean AirPods Pro, AirPods and EarPods

How to connect Xiaomi Mi Air 2 to a smartphone and laptop

Apple AirPods (EU)

Apple AirPods 2 (2019) headphones in a case with wireless charging

Apple AirPods headphones (Ru)

Apple AirPods 2 (2019) EAC (RU/A) headphones in a case with wireless charging

Apple AirPods Pro headphones

How to clean AirPods case from blackheads?

Washing the cover with vinegar solution First, you need to mix vinegar with water in a ratio of 1: 1. Then you need to dip cotton swabs into the solution and wipe the dirty areas of the cover with them. You can use a toothbrush, including the other side (with a special eraser for gums).

Interesting materials:

How to set up a Wi-Fi TV? Tp link tl wr841n setup as a repeater? Digital TV 20 channels free how to set up? In which file are Google Chrome settings stored? How to set up the second multiplex? Zixel kinetic how to enter settings? Zyxel how to enter settings? How to set up Zyxel keenetic extra ii? Zyxel keenetic giga 2 how to reset settings? How to set up Zyxel keenetic lite?

Is it possible to wet

However, many users have tried to wet or even immerse the device in water for a long time and found that AirPods are resistant to moisture and water.

A video appeared on YouTube of a man wearing AirPods running in the rain for an hour and the headphones worked flawlessly. Therefore, they can be used for running outdoors in adverse weather conditions.

Will protection help?

Many electronic devices intended for outdoor use are protected against moisture ingress. You need to understand that the level of security can be quite different.

How to differentiate when purchasing?

This indicator is usually designated as IP. When planning to buy headphones in which you can leave the house in rainy weather or carry out an intense workout, choose products with an IPX6...IPX8 rating. Here, instead of the letter X, there may be a number indicating resistance to dry dust. If you accidentally drop your IP68 rated headphones into water, you'll almost certainly continue to use them. An IP22 class headset will most likely have to be replaced with a new one.

Possible problems after drying

The sensor stops working

If the iOS or Android interface does not respond to touch, most likely, water has oxidized the contacts between the cable and the sensor itself. In such cases, it is better to take the phone to a service center, since attempts to repair the touchscreen on your own can aggravate the situation.

Sometimes the sensor works, but the display becomes unreadable due to moisture getting into it. There may be light or colored spots, streaks and traces of fogging under the screen glass.

Speaker fails

This part is most often filled with water. After this, the speaker begins to wheeze, and the sound may disappear completely. But in most cases, after complete drying, even at home, the speaker works again. If this does not happen, the part should be replaced.

The interlocutor can’t hear you

The microphone stopped working because the pickup membrane failed. Only replacing the module assembly will help.

No network, no Wi-Fi connection

The phone won't turn on

If the gadget does not turn on or charge at all (but may vibrate or the LED indicator lights up when the ON button is pressed), most likely, water has penetrated the main radio elements of the circuit (motherboard) and modules, causing the metal contacts to oxidize. Sometimes it helps to revive the device by completely disassembling the device and cleaning the parts from traces of corrosion salts. In some cases, the motherboard will need to be replaced, but the cost of repair may be equal to the price of a new smartphone.

Constantly reboots or glitches

It often happens that a smartphone, after drowning or partial immersion in liquid (in a bathroom or toilet), constantly reboots and glitches. Most likely there is something wrong with the memory module on the main board, try drying the device thoroughly again. If that doesn’t help, then you should contact a professional for professional repairs.

Shows headphones

If the headphone icon appears, liquid has leaked into the 3.5mm jack and shorted all the pins. It is necessary to carefully clean the connector at the bottom end with a toothpick wrapped in cloth.

Water protection

To protect your headphones from water, you need to be more careful with them. For this you can use:

Special accessories to prevent headphones from falling out of your ears
Protective covers for the case

Accessories to prevent headphones from falling out of your ears
In any case, if the headphones fall into water for a couple of minutes, nothing will happen to them.

What not to clean connectors

There are moments that, if implemented, can lead to death or just ordinary breakdown.
Accordingly, we will discuss them below: If you experience certain problems with the operation of this accessory, first you need to check for contamination. Since this reason is the most popular of all other similar ones. In this case, poor contact between connected devices can be detected. However, you can first connect the product to other work equipment, for example, to a similar smartphone or to a computer. Therefore, if the sound does not play back or is noisy, then the problem is most likely a clogged connector.

Source

What to do if your headphones fall into water?

If your headphones fall into water or get water in them, first of all you need to:

Get them out of the water and out of the device as soon as possible.
Try to lightly shake the water out of them (just don’t overdo it with shaking, otherwise water in the headphones will not be your only problem :-)) and blot with any well-absorbent material - a napkin, towel, toilet paper, as long as it absorbs moisture well.
Dry them thoroughly. Of course, it is advisable to disassemble them before drying, but, alas, this is not so easy to do with all headphones. If you still decide to disassemble them, then our article on how to disassemble different types of headphones will help you! You can dry them on a warm radiator, but it is advisable to place them on a napkin so that it absorbs the moisture that evaporates during the drying process. You can also dry them with a warm hairdryer (they can melt when hot) or by placing them on an absorbent napkin. The time will depend on the drying method (from several hours to several days).

If you decide to disassemble the headphones and dry them disassembled, and after drying you find stains on the membrane, then you can try to gently wipe the stains with water (with a damp cloth), but be careful not to damage the membrane (better, of course, than this don’t do it, but accept the consequences)! The sound quality will depend on the presence of stains. Alas, if they are left after drying, the sound may not be as good as before, but nothing can be done about it.
If you dropped your headphones in tea or any other liquid or accidentally washed them, causing the headphones to stop working completely, then just try rinsing them gently under water and then drying them thoroughly (you still have nothing to lose).

What to do if wireless headphones are connected separately?

For working separately

, you just need to put one earphone in the case. The connection will be to the earphone outside the case. Or, in the opposite case, when connecting from the case, on the contrary, remove the unnecessary earphone to connect to the remaining one. Also, in some models it is possible to simply turn off the earphone by pressing the button.

Interesting materials:

How to send a photo via Skype? How to send gigabytes to a Beeline friend? How to send a voice message from Apple Watch? How to send a disappearing photo to VK? How to send a link? How to send a link from email to Viber? How to send messages on Discord? How to send recordings from a voice recorder to VK? How to celebrate 12 years of marriage? How to grow orchid roots above water?

What to do if water gets into the headphone jack

Water got into the headphone jack, this is also not fatal and there is also a way out (unless, of course, you completely bathed your device in water, which is why it completely stopped working). To do this you need:

Immediately after water gets into the connector, quickly remove the battery from the phone (especially if you dropped the entire device into water).
Blot the connector itself with an absorbent cloth, rag or toilet paper.
Dry it thoroughly. To do this, it is better to simply leave the device untouched for a day or two with the battery removed (especially if you dropped the entire device into water). If water only gets into the connector and in a small amount, then dry it thoroughly with a warm hairdryer and then leave it to dry on a napkin for several hours. If you dropped the entire device into water, it is better to dry it disassembled on an absorbent cloth for several days.
Gently wipe the contacts inside the connector with alcohol. The contacts could have oxidized due to water, which could have caused a short circuit, as a result of which headphones or other devices connected through this connector to the device may not work. Also, if we are talking about a headset, the device can always see it connected, even when it is not. (A common case is if the iPhone has fallen into water and shows headphone mode when there are none there)

If drying the contacts with alcohol did not help you, then replacing the connector will help. Our article will help you with this. Or, alternatively, you can take your device to a service center, where they will also replace the connector.

What should you do if your phone sees the headset connected even when it is not?

This may be due to shorted contacts in the headset jack due to water getting into the jack. You can read above about how to solve this problem.

Plug and unplug your headphones.

The first thing you should try if your iPhone thinks the headphones are connected is to simply plug them in and unplug them. It's possible that the headphone jack on your iPhone didn't recognize the last time you unplugged your headphones and still thinks they're connected. Plugging in headphones and then unplugging them may solve the problem. If this helps and this situation does not occur with any regularity, consider it a one-time occurrence and stop worrying.

Compressed air

1 Buy a can of compressed air.
These cans can be purchased at electronics supply stores. Compressed air can also remove dirt from computer parts, so you can look into PC component stores. Air is the safest cleaning method because you won't have to insert anything into the headphone jack.

2
Point the nozzle into the socket.
Direct the air nozzle into the socket. Some cylinders are equipped with thin tubes that are inserted into the can. They are even easier because you can point the tube directly into the socket and deliver air precisely into the small hole.

Cotton buds

2 Remove the cotton from the tip of the stick.

Free one side of the stick from the cotton. The thickness of the tip should correspond as much as possible to the thickness of the stick in the middle part. After this, it will fit exactly in the nest.

4 Use rubbing alcohol.

If the dirt doesn't budge, dip the stick in rubbing alcohol. The tip should be slightly damp, but not wet. Remove excess moisture, insert the stick into the socket and rotate around the axis.

Use a small amount of alcohol to avoid corroding metal parts. 5 Dry the nest with a clean stick.
The rubbing alcohol will evaporate quickly on its own, but you can remove excess moisture to protect the contacts. Insert a clean, dry stick into the socket. Then leave for a few seconds and rotate around the axis to dry the nest.

What to do if your headphones get wet - detailed steps

The sooner we get the headphones out of the water, the better . If along with them your source (phone, player) also got wet, then, of course, we take it out too. In any case, disconnect the headphones from the device. If they are wireless, turn them off. The same applies to the source. 1.1 If you dropped your headphones not into water, but into tea, coffee, soup, morning smoothie or any other not particularly homogeneous liquid (or washed them in your pocket - classic), then it makes sense to first rinse the headphones under water. It sounds strange, but most likely there is nothing to lose.
Carefully but persistently shake out all the water (liquid) from the headphones as much as possible. Of course, you shouldn’t overdo it, so as not to “shake all your insides.”
If the headphones “drowned” on the street , then, most likely, there is nothing particularly well at hand that absorbs water, then you need to wipe it with at least something and rush to where there are more suitable things. Paper towels, just napkins, scarves, toilet paper, microfiber are good for this purpose.
The remaining water can be easily blown out with a hairdryer , because usually headphones have more than one hole: we blow into one, and it pours out of the other. It is important that the air from the hair dryer is not hot - this is harmful for thin plastic. Hair dryers usually have several modes, including cold air, which is what I would recommend. In addition, you can additionally dry individual parts with a hairdryer. Of course, you shouldn’t get carried away with this – a few minutes will be enough.
After all the preliminary procedures, drying actually follows . If it is possible to carefully disassemble the headphones, we do it. If this is not possible, or you have no idea how to approach the analysis, we leave it assembled. In any case, you can read our universal article on disassembling headphones - it may help. 5.1 If you have taken the headphones apart, go over them again with a hairdryer, you can gently wipe the “insides”. It’s better not with cotton wool (so that nothing remains), but with a bandage folded several times. If the membrane is quite large and you see streaks on it, you can try to erase them. This should be done extremely carefully so as not to damage this fragile part of the headphones. 5.2 After all of the above (or if you haven’t taken it apart), place the headphones on a napkin, paper towel, microfiber or other absorbent material. Then we leave it to dry: on a radiator or in the sun (depending on the time of year). If you dry it on a battery, make sure that the headphones do not get too hot; a thicker layer of absorbent material may be required. If you dry your headphones in the sun, also remember to pay attention to possible overheating. Sometimes it is better to remove it from direct rays and simply leave it in a warm place: longer, but safer. Actually, without a battery and sunlight, just in a dry place the headphones will also dry out. Sooner or later. 5.3 It is impossible to say exactly how long it will take to dry - it depends on the degree of getting wet and how much water remains inside. Minimum - a day. After which you can carefully inspect the headphones, shake them and check if there is still water left in them. If you are sure that there is no left, put it back for another 12 hours, and then check. I would say the optimal period is about 2 days.
We assemble the headphones, if we took them apart, carefully check again for any remaining moisture, and connect them to the working device. Most likely the sound will change - it will become quieter, at least. Or it won't exist. But you may be lucky (especially in the case of simple and inexpensive headphones) and the sound will remain approximately the same as it was before the “swim”. If drying doesn't help, you can try taking the headphones in for repair. You can, of course, try to fix it yourself; to do this, read our general instructions for repairing headphones.

Sources

https://msch71.ru/popala-voda-v-razem-dlja-naushnikov/
https://FamilyStez.ru/chistota/v-naushnik-popala-voda.html
https://ru.wikihow.com/%D0%BF%D1%80%D0%BE%D1%87%D0%B8%D1%81%D1%82%D0%B8%D1%82%D1%8C -%D0%B3%D0%BD%D0%B5%D0%B7%D0%B4%D0%BE-%D0%B4%D0%BB%D1%8F-%D0%BF%D0%BE%D0% B4%D0%BA%D0%BB%D1%8E%D1%87%D0%B5%D0%BD%D0%B8%D1%8F-%D0%BD%D0%B0%D1%83%D1%88 %D0%BD%D0%B8%D0%BA%D0%BE%D0%B2
https://headphonesbest.ru/faq/chto-delat-esli-v-naushniki-ili-razem-popala-voda-12209

What to do when snow gets into the headphone jack

For example, when snow gets into the headphones from a mobile phone or smartphone, the sound in the device may disappear or not be transmitted at all.

Important: If this problem occurs on your device, you must quickly turn off the device. Experts advise trying to open it, clean and dry it.

If the problem persists, you can also use cotton swabs to clean the devices. If all of the above methods do not help, then you should contact a mobile phone repair specialist.

If water gets into the headphone jack, the phone may indicate that it contains device data when it actually does not. In this case, the sound may disappear and practically nothing will be heard. The player may not play sound without them.

Why is there sound only in headphones on iPhone?

The most common causes are moisture, oxides and dust contamination. A simple example. Carry your phone in your pocket - dust is clogged - iPhone

thinks that dirt is
the headphones
.

Interesting materials:

What can't be said about a bank card? What is not allowed on the New Year's table 2022? What can't you buy on Ali Express? What can't you put in your suitcase? What cannot be transported across the Russian border? What cannot be carried in Air Astana hand luggage? What cannot be carried in hand luggage? What cannot be carried on an airplane in Kazakhstan? What can't you watch on Twitch? What do E Girls wear?