How to make creases on trousers with an iron

In everyday, ordinary life, many men prefer to wear jeans or trousers made of a material that does not need to be ironed too often. But sometimes you have to deviate from this rule - a celebration, a meeting in an official place, or even a trip to the theater requires that a man wear appropriate clothes - a jacket and always trousers with creases.

The last detail of the wardrobe requires considerable skill from the housewife, because in order to properly iron the creases, experience is always needed.

Perfectly straight creases on any men's trousers are the result of painstaking work, and in order for it not to disappoint, it is necessary to properly prepare the clothes and follow all stages of ironing.

Preparation stage

A special technique will help in this matter, since using a regular iron without additional functions will significantly complicate the task. You will also have to use improvised means. If the housewife has an evaporator (steam generator) or an iron with a built-in fabric steaming function in her arsenal, this procedure is mandatory. This will take literally 10-15 minutes, but will simplify further work. If not, you will have to manually dampen the material, such as using a spray nozzle with minimal spatter.

Read also: Mescaline drug and consequences

Before you start ironing your pleated pants, you need to prepare them.

Be especially careful when using a standard iron as you may not notice loose material. It is best to ensure that the device and clothing are not in direct contact with each other and that there is damp material between them, such as regular cloth (on diapers) or gauze.

To prevent dirt from sticking to your trousers and to ensure that the arrows are visible only in designated areas, prepare the ironing area and appropriate items. Preparatory steps:

Ironing with water

To understand how to iron a thing without an iron, it’s enough to remember the old, ancient methods.

It can be done:

Using a spray bottle.
Palms dipped in water.
Using a towel.

Please note that after such ironing, things will have to be dried. That is, it will take additional time.

Iron with a spray bottle or palms

Lay the clothes out on a flat surface, straightening out all wrinkles.
Moisten it with water (dip your palms into the container or use a spray bottle).
Then hang up the dress or trousers and wait for the items to dry.

Experienced housewives recommend in this case using a special solution consisting of 9% vinegar and regular laundry conditioner.

Mix liquids in equal proportions.
Pour into a spray bottle and apply to clothing.

Iron with a wet towel

Take a fairly large towel and soak it in water.
We carefully lay out the item on its surface. Straighten out all the unevenness and wrinkles.
Wait until all wrinkles are smoothed out.
Hang clothes on hangers and dry.

Traditional methods

In order to make creating creases on trousers much easier, several useful tricks were invented:

The item, turned inside out, is placed on the ironing board. Then, using a bar of soap, draw a line where the folds will be in the future. Then, on the front side, using a wet comb, insert it between the teeth and draw along the drawn line with slight pressure.
You can also simply lightly point a piece of soap over the place where the arrows will be, and then smooth it through wet gauze on the front side.

How to avoid ironing on the road, in a hotel, at home

This is truly the most affordable and easiest way to avoid subsequent ironing. It is ideal for people who often have to leave home.

If you are one of them, adopt these tricks:

Choose your wearables wisely. It is clear that it is preferable to wear clothes made from natural fabrics. But it has significant drawbacks - it wrinkles quickly and is difficult to iron. Therefore, for business trips, choose a wardrobe that includes several suits made from wrinkle-resistant fabrics: there is a large selection on the shelves of modern stores.
Pack your things in your suitcase according to the video instructions. There are many of them on the Internet.
Bring a few coat hangers with you. After arrival, hang up your wardrobe, do not leave it in your suitcase. If something is wrinkled, use one of the suggested methods immediately. This way, the fibers of the fabric will not have time to fix themselves, and it will be much easier to deal with folds.
Wash clothes correctly: do not wring or twist. Use a special mode if you prefer to wash in an automatic machine. Hang your laundry carefully, making sure there are no wrinkles.
If you don't have a hanger at hand, hang the laundry on a line. But remember, you can’t use clothespins. The creases from them are difficult to smooth out.
Leave knitted clothes - sweaters, cardigans, skirts - to dry on a horizontal surface; even a table top will do. This way, the products will not only not wrinkle, but also not stretch.

These simple recommendations will help you look dignified and presentable, even if you have difficulties using the iron.

Stay beautiful!

Tips from the forums

Irina, Brest

I iron along the inside of the trouser leg - it’s more convenient. I put the trouser leg with the inside facing up, and fold the other leg down. I lay the fabric (I iron with steam, so through the fabric) and move it 10 cm from the dart on the belt - adjusting and tracking. This is the front arrow.

Then I shift the back side of the trouser leg closer to me and do the same. If the trousers are wrinkled on the butt near the belt, then first I pull the butt straight. board and iron everything there, then iron the arrows.

Source:

Features of ironing women's and men's trousers

Not all models have corresponding arrows that reach the waist; some models should be made to the knee or slightly higher (for example, in women's suits), please pay attention to this. This is especially true for fashionable women's and men's designer models.

The basic principles are as follows:

do everything one by one;
do not ignore the advice on clothing labels;
if you are not confident in your abilities, try on regular diapers;
pay attention to all sides and places where the product is located; if left somewhere without treatment, it may become wrinkled;
Iron only through the lining, otherwise bubbles may form;
fold your trousers correctly, otherwise the folds and bows may recede;
do not overdo it so that the trousers do not sparkle;
It’s better to press in one place several times than to overdo it and ruin the material.

If you follow these simple rules, you can make your own creases on your pants. Even if the model didn’t have them before, you can experiment and get what you want.

How to iron trousers correctly so that the creases last long

To prevent the arrows from “creeping” and to last a long time, you can secure them. There are two reliable ways to do this:

Read also: Directory of colors and shades

Treat the underside of the arrows with a piece of moistened soap, and then gently smooth them out.
Prepare a solution from a liter of water and a tablespoon of vinegar. Moisten gauze in the resulting mixture and iron the product through it.

After this treatment, the creases on the trousers will retain their original appearance for a long time.

Uneven arrows

Not everyone is able to make perfectly even creases on their trousers the first time. As a rule, the situation changes when more experience becomes available. To correct bad lines, you need to smooth them out from the wrong side and repeat the algorithm step by step, trying to iron them better.

You should read this!

Types of men's trousers: model, fabric, features of choice November 19, 2020

9449

Etiquette rules for men that everyone should know about October 30, 2020

32546

You can save time on creating creases by providing your trousers with proper care: after each wear, it is advisable to clean them with a clothes brush to remove dust and adhering particles of dirt, threads, and hairs. You need to store your trousers on a special hanger.

How to iron trousers with creases

Before you start ironing your pants, you need to make sure they are clean. Even small, unnoticeable stains under the influence of high temperatures can appear on the fabric and begin to catch the eye. At the same time, dirt penetrates deeper into the structure of the material and is not easy to get rid of.

Men's trousers are ironed through cotton fabric or white gauze. This way there will be no streaks left, and light-colored trousers will not turn a different color. Also, with the help of gauze, you can avoid the appearance of gloss, which appears if synthetic threads are present in the structure of the material. Under no circumstances should you use newspaper instead of gauze: the typographic font may transfer to your trouser leg.

Particular attention should be paid to the iron. If it does not have a steaming function, you need to prepare a bottle of water with a spray: to achieve the desired effect, you need to wet the fabric when ironing. The dirty surface of the iron must be cleaned, otherwise the dirt may transfer to the product or complicate the ironing process.

What to do before ironing

Check shortcut

Make sure your pants can be ironed.

Wash the pants

They must be clean, because under the influence of high temperature, any stain can become embedded in the fabric and it will be impossible to remove it.

Prepare a bottle of water with a spray bottle

To smooth out wrinkles, they need to be sprayed.

Take a clean towel

After ironing, a shine may appear on the trousers that should not be there. To avoid this, place a damp towel between the product and the iron. It will also help get rid of stubborn creases if you don't have a spray bottle.

Place an ironing board

It is best to iron trousers on her.

How to maintain the effect?

There are secrets to preserving arrows for a long time:

The arrows will remain on the product longer if you smooth them through a damp sheet of paper.
Gauze with vinegar will seal the effect.
Soap will also help. They are used to follow the arrows from the inside out, then the pants are steamed.

If you follow all the rules and listen to advice, then ironing creases on trousers will become an easy process that will not cause much trouble. In addition, it does not require special equipment or knowledge. Having brought the procedure to automaticity, less time and nerves will be spent on ironing. And the appearance will become an example for every person who wants to look beautiful, well-groomed and successful.

Different ways to heat fabric

Delicate fabrics are smoothed at lower temperatures than with an iron. Such slight heating can be achieved in the simplest ways. Take a metal pot for making coffee, pour boiling water into it, let the metal warm up and carefully, holding the handle, move the bottom of the pot over the fabric. The main thing is that the bottom is completely clean. It's good if the Turk has a lid. It will prevent the water from splashing. The water can be changed several times. A metal ladle or mug will do as a substitute.

Shirt cuffs are difficult to iron with an iron. An ordinary light bulb will help. You need to turn it on for 15 minutes, then turn it off, ask your husband to unscrew it and hold it. Meanwhile, you move the cuffs of your shirt along it. Until the wrinkles are smoothed out. You can iron your tie in the same way. The hair straightener can be used as a full-fledged iron. Its surfaces must be cleaned of grease and other contaminants. First, you need to try the heated straightener on an unnecessary piece of fabric.

This way it will be cleaned and will pass the test for usability.

Next, you can gently stroke the fabric with it. The method is good when traveling

Light trousers can be ironed while traveling using a plastic bottle. You need to pour hot water into it and carefully roll one pant leg with a roller. For greater effect, hold this entire structure over steam from a kettle. Repeat the procedure with the second pant leg, changing the water. Finally, after turning off the iron and cooling it halfway, you can iron delicate fabric with it.

How to create crisp folds without using an iron?

In addition to the usual method of ironing the arrows, you can use alternative options using improvised means.

Ironing can be done:

applying pressure;
using a hair straightener.

The press can be organized by the pressure of a load, for example, heavy books. Another option is to spread your pants under the mattress. But such methods will not give such clear arrows as those obtained when processing with an iron.

Another way to “smooth out” creases on trousers is to use a hair straightener. The working plates of the iron are first cleaned and degreased.

It is also advisable to use a heated device through additional fabric . You need to act extremely carefully so as not to burn the material.

How to iron fabric under a press

This method can hardly be called fast, but the effect is obvious.

So let's get started:

Take a piece of clothing and slightly moisten it with water.
Unfold the mattress from the bed.
Carefully place the item on the bottom of the base.
Place the mattress on top.

The item will look ironed after 2-3 hours. You can do this at night if you know that an important event is coming up in the morning and there will be no opportunity to use the iron.

Preparation

First of all, you need to prepare for the upcoming ironing. To achieve the best effect, you should use an iron equipped with a steam function. Otherwise, the material will constantly have to be additionally moistened.

When using a regular iron, it is necessary to avoid direct contact with the fabric itself. To avoid such contact, use a damp cloth.

Before you start ironing, you need to make sure that you have at hand all the necessary materials and equipment that you cannot do without in this work. Let's list everything you need.

What you need to prepare

The most necessary thing is an ironing board. It should be stable and well lit. But in the absence of it, you can use any flat surface: table, sofa, bed, even the floor. You just need to first cover such a workplace with a thick blanket folded several times or a thin blanket, for example a flannelette.

You should first check the condition of the iron - its sole must be absolutely clean.

It is most convenient to use a device with a steaming function, then ironing with its help takes significantly less time. If there is no such function, the trouser fabric will have to be moistened periodically. For this you will need a spray bottle.

Do not allow an iron without a steam function to come into contact with the fabric. Therefore, it is necessary to prepare protective material.

How to iron trousers with creases without damaging the fabric? Do not allow the iron to come into direct contact with it without the steam generation function. Therefore, it is necessary to prepare protective material. Most often, this is a piece of pharmaceutical gauze or a piece of thin cotton fabric, which is moistened from time to time. You should not use newspaper for this purpose, as printing ink often prints on trousers.

Preparing things

Smooth, symmetrical curves create the effect of sophistication and style on any person. However, in order not to ruin your trousers, you should adhere to several basic rules.

Accuracy

Creating neat curves on clothes should begin with washing.
This should be done so that during the ironing process the existing dirt does not become completely ingrained into the fabric, because after that it will no longer be possible to wash it off. Therefore, if there are traces of sweat, stains, or various stains on your trousers, you should not be lazy about loading the washing machine. Important!
Only clean clothes can be exposed to high temperatures.

Iron mode and material composition

Before you start ironing, you should study all the properties of the item. After all, only the specified temperature is suitable for various fabrics. For example, wool will require 100-120 degrees, for nylon, knitwear and silk 60-80, pure cotton, drape, tweed 140-170, and for denim 150-200. Without knowing such features, there is a big risk of completely ruining the thing. Therefore, to avoid doubts, you should carefully study all the labels on things, where all the necessary information about proper washing and ironing is usually indicated.

Ironer

Such a complex word means just a piece of ordinary fabric through which clothes are ironed. This helps the item remain without iron marks. One of the main conditions for its use is a perfectly clean iron. Cotton or white linen are usually used, but for woolen items, wool is best. It is quite easy to use: the iron is placed on the fabric and blotted with a spray bottle, brush or wet sponge, and then ironed until completely dry. If there is no special fabric for this, then ordinary gauze or white material that does not leave marks will do.

Correct surface

To get the perfect result, of course, it is best to use a specially designed ironing board. However, if there is none, then any equal surface can do. A floor pre-covered with a towel or blanket is ideal.

Spray

Nowadays, almost every iron has a steam mode.
If it happens that such a function is missing, a regular spray bottle with water can come to the rescue to moisten the material. This should be done to make it easier to iron. A moistened cloth will allow you to smooth out all the creases and folds much faster. And the risk of burning the fabric will be much less. Interesting!
Nowadays, a large number of devices have been created that can simplify the life of any housewife. This includes a steamer, which is able to more carefully and quickly deal with all hard-to-reach places.

How to make something look ironed after washing

Some housewives are familiar with ways to achieve the ironing effect without using an iron. The secret lies in proper drying of the item and subsequent styling.

As soon as you wash the item, shake it . Be careful not to create wrinkles.
Hang it on a hanger and check again for any creases.
Leave it to dry, but do not overdry the clothes.
Then roll it up while it is slightly damp, carefully connecting sleeve to sleeve, edge to edge.
Leave to dry.

If you wash in an automatic machine , use the “light ironing effect” mode. This way things will wrinkle less.

If you wash by hand , do not wring out the product. Hang it up and let the water drain. After a while, shake the item and hang it on hangers or lay it out on a flat surface to avoid wrinkles.

Large items , such as bed linen, tablecloths or curtains, can simply be folded flat after washing. Then you won't have to iron them. If the iron in your house suddenly breaks down, you can easily do without it for a while. Duvet covers, sheets and pillowcases will look ironed, no one will notice that the hostess did not use the iron.

These recommendations will allow you to prepare your clothes for use, even if they are wrinkled in your suitcase.

How to fix the arrows?

To ensure that your arrows are even and last a long time, you can use a few more tricks. So, if you want such elements of trousers to be fixed better, you need to add a little vinegar or ammonia to the spray water. They will allow you to fix the fabric in the desired position.

You can also use soap to fix the arrows more if you already know how to do them correctly. You will just need to rub it on the inside of the trousers along the crease line and smooth this area after this step.

Ironing with a light bulb

This method will help if you need to iron a small part of your wardrobe, for example, a tie, scarf or neckerchief.

The light bulb is unscrewed from the socket in a heated state and the item is wrapped around it. Keep it for a while.
If necessary, wrap the rest of the clothing.

Attention! We recommend using gloves. There is a high risk of hand burns.

Smoothing trousers step by step

So, you have prepared to work with the product, and now you need to determine how to properly iron your pants. You can do this as follows:

To begin with, you should iron the lining parts, pockets, and also the waistband. He will need to pay special attention. After this, the trousers can be turned right side out.
Next you will need to smooth out the top of the pants. In this case, you can use a special pad that can be placed under the individual elements of this part of the product.
Now it’s important to move directly to the trouser legs. They should be folded so that the front and inner side seams on them coincide. You will need to iron them on one side using the steam function, then repeat this procedure on the other side, fold back the top leg and iron the inside leg, repeat this step for the second part of the product. There is no need to make arrows at this stage yet.

Important: remember that each area you are working on must be covered with gauze. This gauze also needs to be constantly sprayed with water from a spray bottle, otherwise it will quickly dry out and ruin the result of your work.

Choose the right clothes

Among modern fabrics, you can always choose those that do not wrinkle or almost do not wrinkle. These are fabrics made from a mixture of synthetics and cotton or wool. Things made from them dry faster after washing and hardly wrinkle.

Natural things are convenient, it’s easy and comfortable to walk and work in them, but wrinkles from lying in a suitcase or sitting in transport will ruin your appearance. Therefore, when going on a business trip, take care of your wardrobe in advance. Clothing made from mixed fabrics is an acceptable and comfortable option. These things look quite decent and are comfortable to wear. And although the skin breathes worse through synthetics, the appearance is worth it. Negotiations and meetings with clients do not last long.

Attention: creating flawless folds

Housewives have their own secrets on how to iron creases on trousers so that they last as long as possible. The two most effective ways.

Soap. Turn the pants inside out and carefully run a thin, slightly damp piece of soap along the marked arrows. Then turn the pants inside out and iron them with gauze.
Water with vinegar. Take a liter of water, add a tablespoon of vinegar. Soak the fabric that acts as an intermediary between the trousers and the iron in the solution. Place the dampened, well-wrung out cloth on top of the clothing and iron the creases until the fabric dries. Some housewives add soap, shampoo or something similar to the solution. This can be done if you are sure that there will be no soap stains left on the fabric.

Don’t be afraid of vinegar, the smell will disappear almost immediately, leaving no reminders of itself. If you are afraid that the arrows will “move out” during ironing, pin them at the bottom and top with pins or sewing needles. By the way, vinegar is also used if you need to remove shine from pants left after an unsuccessful ironing.

Iron with hair curlers

It's rare that a lady doesn't take a hair curler with her on a trip. They will help out when you need ironing without an iron.

With this device you can iron small wardrobe items perfectly:

Ties.
Skirts.
Scarves.
Headscarves.
Tops and more.

The curling iron can also handle creases on trousers. So the recommendation will be relevant for men as well.

Important! Before use, wipe the curling iron with a damp cloth to remove any remaining hair product. Otherwise, difficult-to-remove stains may remain on clothing.

Plug in the device and heat it to the optimal temperature.
Clamp a piece of clothing between the pieces of the tong. Hold it for a while. Don't overdo it, otherwise you'll end up with scorch marks.
Do this with the entire thing, smoothing it out section by section.

How to secure the arrows so that they last for a long time?

When ironing classic trousers, everyone wants the creases to remain sharp for a long time. Additional processing will help to do this. It can be organized using vinegar, starch or soap.

Soap for the underside

Having turned the trousers inside out, run a dry soap along the fold line along each trouser leg . This method will help secure the fold. After this, the trousers are turned right side out and thoroughly ironed.

Do not use wet soap. This may cause a stain to appear on the front of the product.

Vinegar and starch

A simple technique using vinegar will help strengthen the fold and make it more durable.

To do this, prepare the following composition by mixing the components:

water (1 l.);
vinegar (1 tbsp);
starch (1 tsp).

Work order:

The trousers are turned inside out.
Wet the trouser legs with a slightly prepared solution.
Turn it right side out.
Mark the folds.
Smooth out the arrows in the usual way.

This composition should not be used to treat fabric on the front side, as this will lead to the formation of stains.

Ammonia or vinegar

One of the simple ways to fix the arrows is ammonia or vinegar. These substances are used diluted in water. How to use:

Prepare a solution at the rate of 1 tsp. prepared preparation per liter of water.
The fabric through which the arrows will be ironed is moistened in this solution.
The fabric is wrung out.
Ironing is carried out in the usual way.

For each arrow, the supporting fabric is moistened separately, since the dried auxiliary fabric loses its function of fixing the arrows.

Basic ironing process

Having completed the preparatory stage, you can proceed directly to smoothing:

According to all the rules, trousers are ironed from top to bottom. Initially, the pockets are processed, if there is a lining, the codpiece area, the belt, and then the length of the trouser legs itself. It is necessary to use pressing movements with an iron using steam. To prevent the appearance of kinks and contours of pockets on the front side, you can place a thin towel under them.
Next comes the main stage - ironing the front side. This is the most responsible and painstaking stage, in which incorrect behavior will affect the appearance of the ironed product. For convenience, the trousers are laid out on a board and straightened with your hands. To do this, you need to match the inner and outer seams of the trousers. They should overlap each other as accurately as possible, and the seam lines should match.
The top of the trousers contains many internal seams. This is a very difficult area for high-quality ironing on the front side. How to properly carry out the ironing procedure so that the internal seams do not appear on the face? A little trick will help: you need to put a small pad inside the trousers, and then iron them using a moistened iron.
Before shaping the creases, you need to iron the pant legs. First, the outer sides of the trouser legs are processed one by one. Then the upper trouser leg is folded back, revealing access to the inner surface of the second half of the trousers, which is thoroughly steamed. Having turned the trousers over, the same manipulation must be performed with the inner surface of the second leg.

A business man should a priori look decent

Tips for keeping creases on your trousers for a long time

Who doesn’t know the feeling of disappointment that a lot of time has been wasted: trousers with creases, which took so much effort to create, suddenly lose their appearance as soon as you put them on. How to make creases on trousers so that they last a long time?

There are several proven methods.

To obtain more neat and elegant lines, it is better to moisten the iron not with water, but with a weak solution of vinegar essence (1 tablespoon of acid per 1 liter of water). Thanks to the acid, there will be no shiny marks left on the fabric during the ironing process. Don't be afraid that the item will smell unpleasant - the specific vinegar smell disappears very quickly.
Laundry soap will help maintain the shape of the arrows for a long time. With a small piece, you need to draw lines from the inside of the fabric in the place where the folds from the ironing should lie. After this, the product is ironed through gauze (mesh).
There is no need to put on trousers immediately after they have been ironed with creases. The fabric will remain damp for some time, so it is easy to wrinkle it and break the ironed lines (especially if you use a steamer to make creases on your trousers). As soon as the ironing is finished, things cannot even be removed from the ironing board - they must lie until the material has cooled down properly.
To fix creases on light-colored linen or cotton trousers, you can use starch (white stains remain on dark ones). The composition is prepared as follows: 1 tsp. starch is dissolved in 1 liter of water, the mixture is heated and boiled for 3 minutes. Then use it to wet the iron when ironing.
You can keep creases on your trousers longer by using ammonia. It also helps eliminate shine left on the fabric after ironing. It is enough to add a few drops of ammonia to the water with which the iron is wetted, or directly into the steam tank built into the iron.

The ironed product with arrows should be placed on a special trouser hanger or on the back of a chair. If you always store your clothes this way, the creases will keep their shape better, and you won’t have to spend a lot of time ironing or steaming each time.

Express steam ironing

This is the first thing that comes to mind when you are puzzled by the question of ironing things without an iron. But not everyone knows how to do it correctly.

First of all, focus on the size of the item, and only then choose the appropriate method:

Bath

Larger clothes (coats, suits, dresses, trousers) are easier to iron over steamy hot water in the bathroom.

To do this, fill the tank with boiling water. Hang the item on hangers and place the hanger above the bathtub. Carefully straighten out all the folds.

Leave the room and try not to enter there for 30-40 minutes (it is better to do this in the evening - by morning the clothes will be ironed).

Saucepan with water

Suitable if the item is small in size. This way you can iron T-shirts, tops, skirts, and shorts.

Boil water on the stove and hold your blouse or skirt over the steam.

Note that the method is not as effective as steaming over a bathtub.

Kettle

Use a regular kettle if you need ironing without an iron, but the conditions in the hotel do not allow you to use the bathroom, and there is no stove at hand.

When the kettle boils, steam shoots out of its spout; we hold the crumpled item above this stream, smoothing out every wrinkle.

How to remove shine?

We often encounter a situation where, when ironing trousers, shiny marks remain on the fabric. And to prevent their occurrence, you must follow these simple rules:

It is advisable to iron trousers on the reverse side to avoid shiny marks.
When ironing the arrows, use an ironing iron. This is a small piece of fabric, which during ironing is regularly moistened either in plain water or in a weak solution of essence, which is made up in the following ratio: use a teaspoon of acetic acid per liter of water.

Fabric processing conditions

Another very important initial condition for our problem is the need to determine the optimal temperature regime.

To do this, look at the product label, on which manufacturers indicate information about product care using special symbols.

If you can’t find the shortcut, then use our tips:

Strong and durable cotton, which can be pre-moistened, can withstand high temperatures up to 170 degrees;
A popular suiting fabric that holds folds well, is not afraid of steam treatment and the 200 degree mark;
For woolen and wool blend products, vertical steaming and a temperature of no higher than 100–120 degrees are recommended;
More capricious linen is turned inside out and smoothed at 200 degrees;
Knitwear is ironed in medium heat mode on the reverse side and vertically treated with hot steam;
Light silk is ironed in a delicate mode without steam and only from the inside with a dry iron through a dry lining. Satin and twill are ironed in the same way;
Viscose should also be ironed carefully at 120 degrees with the possibility of steam treatment.

Depending on the type and structure of the original fabric, the regulator is set to the appropriate position, which will result in a perfectly ironed item without shine.

Conclusion

Trousers of a classic style and cut include arrows. This element of the pants perfectly hides many of the shortcomings of the male figure, lengthening and making the legs visually slimmer. To do this, you need to learn how to properly iron and design arrows. Other styles of sports, urban or neoclassical trousers do not require ironing of creases; it is enough to simply iron the pants from the inside and outside.

For a business person, trousers are almost the most important element of their wardrobe. A neat appearance and impeccably ironed hands will tell even more about its owner than he can tell about himself. For this reason, it is so important to learn how to iron trousers correctly in order to feel confident, and your colleagues will have only a pleasant impression of you.