Tips and tricks on how to wash a baby stroller at home

A baby stroller is one of the most intensively used items.

It is exposed to dirt, dust, rain and other negative factors. The child's activities also contribute to vehicle pollution.

To keep the stroller clean, it must be cleaned and washed periodically. So that it does not lose its consumer qualities and remains neat, beautiful, and safe, this must be done correctly.

Read the article about whether and how to wash a stroller (stroller, transformer, etc.) at home, how to disassemble it before and reassemble it after washing.

Is it possible?

Baby strollers are presented on the market in a variety of models designed for a specific age of the child. They include cleaning at home.

Removable fabric parts are washable: hoods, capes, mattresses. The supporting structure, wheels, metal fastenings are subject to dry or wet cleaning.

It should be remembered that the duration and efficiency of washing depend on the number of removable parts . It is easier and faster to wash a fully or partially disassembled structure than a non-disassembled one.

Before purchasing a product, you need to study the design of the stroller and the features of the material from which it is made.

Conscientious manufacturers indicate:

• material used (fabric, synthetic fabric, leather substitute);
• recommended washing (hand, machine);
• mode (temperature, speed, spin);
• chemical cleaning agents (allowed, prohibited).

Only directly from the manufacturer's instructions can you reliably know whether the stroller can be washed.

What about the new one?

If the new stroller was stored and transported in its original packaging, then before using it, just wipe it with a damp cloth. This will help get rid of fine dust and particles of packaging material.

The decision on the need to wash a new item that was left unopened by the seller is made by the child’s mother based on her ideas about child safety.

What should baby strollers be like 0+

When choosing a model, pay attention to important points:

1. Security. Check:

• Are all transport details recorded as required?
• Are the seat belts in order?
• How high quality is the frame material?
• A crossbar covered with foam rubber or soft fabric is needed in front.
• The brakes should work flawlessly.
• The wheels must be stable and made of rubber or polyurethane.
• No squeaks.

2. Materials. Check that:

• The outer fabric did not react to temperature changes and did not allow moisture to pass through. The fabric must be breathable.
• There was no unpleasant odor, which may indicate the presence of toxic substances.
• There were no problems with cleaning the main components of the structure.
• A stroller for a newborn should not have many metal rivets and buttons, as they often become covered with rust.
• The fabrics were not deformed and did not change their properties under any influence.

Universal baby strollers: the best manufacturers

3. Other important criteria:

• The shock absorption system should protect the baby from shocks and shocks. In most cases, the structure is equipped with spring springs or belts connecting the cradle and the wheel base.
• Compactness and weight. This is especially true if there is no elevator and there are narrow doorways.
• The stroller should be spacious, because the child grows quickly.
• The presence of a large number of removable parts is justified only for models designed for both summer and winter. All-season walking options should be easy to switch and disassemble. Summer vehicles are not equipped with a large number of parts, making the stroller lighter and smaller in size.
• The presence of a blanket for the cold period, pockets, a hood, a mosquito net, a handle height adjustment, and rain protection.

Newborn travel stroller

Going on a trip with a baby is not a problem if you choose the right children's transport. Necessary requirements for travel models:

• Light weight. The optimal figure is up to 7 kg.
• Compact so that the stroller can be easily placed on the top shelf of an airplane, in the trunk of a car or in a backpack.
• Convenience of the child. There must be seat belts, sun protection, and an ergonomic seat.
• Easy to operate and maneuverable.

Rating of popular models:

1. GB Pockit.
2. Maclaren Mark 2.
3. Maclaren Quest.
4. Maclaren Globetrotter.
5. BabyZen YoYo.
6. Combi Mechacal Handy DC.
7. Inglesina Trip.
8. Valco Baby Snap.
9. Silver Cross Avia.
10. Happy Baby Twiggy.
11. Oyster Zero.
12. Nuna Pepp Luxx.
13. Maclaren Triumph.

Now you know what a good stroller for a newborn should be. This means you can choose the best for your baby.

How to disassemble a stroller, transformer, etc. before washing?

A universal, practical, convenient transport for a baby is a transformer . It is used all year round, so you have to wash it more often than other strollers.

The complete set and mounting features of the transformer depend on the brand and the specifics of the model, but its main characteristics are the same for all types. The transformer consists of a large number of parts. It needs to be disassembled before washing.

To do this optimally, it is recommended to follow the suggested procedure:

1. 
   Remove shopping cart.

2. Pull out the cradle and envelope.
3. Unfasten the fabric parts fastened with straps, Velcro, or buttons. Such elements include a muff, a mattress, a bag.
4. If the hood is attached to the base with bolts or screws, then use the appropriate tool to detach it.
   To quickly determine the connection locations, you can use the diagram from the instructions supplied with the product.
5. Remove all covers if possible.
6. Remove the bow that supports its shape from the hood.
7. Remove the wheels by pulling the special brackets.

What to do with non-separable ones?

Washing strollers with non-removable covers and elements is carried out without a complete disassembly stage. Such designs, if possible, preliminarily facilitate:

• remove the wheels
• bumper,
• additional accessories.

The manual method is used for cleaning. For example, a stroller, otherwise called a cane, is washed with a large sponge or brush dipped in soapy water.

Washing begins from its upper part - the hood, not forgetting the metal parts. After this, rinse and wipe thoroughly.

If a family lives in a private house with its own plot, then it is better to wash a non-separable stroller outside using a water hose. In urban environments, a bath is used for washing.

How to remove covers from stroller

There are models of strollers that can easily be disassembled down to the wheels, and there are models in which, on the contrary, you can only remove the hood, and the rest is problematic. To know how to disassemble a stroller, it is advisable to study the design features. But it also happens that the passport for the stroller is lost, or you bought it second-hand - we look and study the features of similar strollers.

Strollers from Capella

These strollers have a very convenient disassembly and assembly system. The covers are attached to the base of the stroller using buttons, zippers, and Velcro. The handle of the capella stroller is not removable. Wheels are removed in two ways, to choose from:

1. Using a pin that needs to be removed.
2. Press the button in the center of the wheel.

Adamex Company

Adamex stroller made in Poland - the covers are made of dense material. The stroller covers can be washed in a washing machine at 60 degrees, which is very convenient. After all, most stains at such temperatures disappear without a trace. In new models, the bolts on the hood are unscrewed; in older Adamex models, almost nothing is removed - here you can wash it entirely in the bathroom, or outside the city.

Joby Company

Geoby strollers are easy to disassemble. There are often options on three wheels. The hood is attached to the cradle with pins - they can be seen and felt on the sides of the stroller. The rear wheels can be removed by pressing on the center of the wheel. The front wheel can be removed and put on by pressing the red button.

Taco Jumper Company

Taco 2 in 1 strollers are completely disassembled. All covers are removed from the Taco Jumper stroller, but be careful with the insert under the legs - it is made of pressed cardboard, and cannot be washed, it crumbles! Only the zippers on the cradle can be unfastened, and the buttons that hold the visor cannot be removed. If desired, if you want to wash the entire cradle, you need to unscrew 8 screws on the plywood bottom of the stroller with a screwdriver, then the 2 rails at the bottom can be removed. Next, to pull out the bottom of the taco jumper stroller, 2 latches are pressed off the frame, and the bottom is pulled out. This way you can wash the entire cradle.

Company Tutis Zippy

After it is no longer needed, the transformable stroller must be washed and put away. The main difficulty with tutis zippy strollers is that not everyone can unscrew the bolts to remove the cover. The bolts are located on both sides of the hood, and are covered with the fabric of the stroller. Try to feel them with your fingers. The cover on the stroller is entirely covered with Velcro and can be unfastened. But in order to remove it from the handrail, there must be a button on the right side of the handrail. Press on it, and the button will pop out (in the photo the place of the button is indicated with a finger).

Preparation for the process

After maximum disassembly, preparation for washing begins . It involves removing dry lumps of dirt from the wheels and the outside of the stroller with a brush. If necessary, this stage is supplemented by removing stains from food and drinks.

If it is not possible to remove dried dirt using a dry method, it is moistened with water. Soaked dirt is removed with a damp cloth.

The dry cleaning procedure must be done carefully so as not to damage the fittings and the integrity of the fabric.

Is it worth buying a royal carriage based only on color?

Hi all.

What was I thinking when choosing this stroller? I will say one thing - the color sank into my soul, our main stroller was red and generally uncomfortable (not because of the color, of course), heavy. By my son’s 1st year, I began to whine, saying that it’s hard to carry, I want another one, let’s buy it, I sighed languidly in children’s stores. Bought.

I am writing this review a year after purchase.

Price at the time of purchase : 10,489 rubles. Sometimes I come across it in Children’s World (and you can only buy it there), the price fluctuates from stock to stock, recently it was about 7.5 thousand, now it’s back at full price.

Link to the stroller - click here.

Nus, pristumis.

The stroller is sold in a box, the kit does not include mosquito nets, rain covers, etc. There is a cup holder, but we tucked it somewhere because it is on the side and makes it difficult to get through doorways, for example in a store. The box was naturally thrown away a long time ago.

I’ll make a reservation right away - that the kit comes with a protective cover (I added a screenshot, the administration didn’t miss it, you can see it on the website). It is inconvenient, first of all, attaching it to the stroller is quite problematic, you need to insert the harness, then fasten it with tight buttons, without damaging your nails.

And it constantly slides off the legs, and if the child is in a lying position, it does not protect from the wind, you have to unfasten it and just cover it like a blanket. It's summer now, we don't use it.

By the way, we also didn’t use the stroller in winter due to the huge amount of snow, which this chariot couldn’t handle. Only sleds.

The color is mustard yellow, bright, just the way I like it. The choice of colors for boys is not particularly large, but I wanted a bright one. The photo shows that there is a fairly comfortable transparent insert made of dense polyethylene, which can be unfastened/fastened with a zipper. Unfortunately, in late autumn we forgot the stroller in the car, there was severe frost and this oilcloth burst.

At first I wanted to change it to a new one, but then I gave up, firstly it’s not very visible, and secondly, additional ventilation has never hurt anyone.

A little about use - we hardly used the stroller in the first summer/autumn, because the child was capricious and wanted white hands, but this spring/summer I appreciated it just what it deserved. We mostly walk in it within the city limits, and almost always carry it in the car so that we can put the child in it at the store. Firstly, it is securely secured there with 5-point harnesses (which is a big plus), it does not run away anywhere, and does not destroy anything. Secondly, we no longer put the child in shopping carts, since he fell from there once.

We don’t drive off-road, we don’t use it every day.

BUT there are two big disadvantages , one smoothly follows from the other.

She is very dirty. I've already washed it 2-3 times, but that's the only way the stains are absorbed.

Despite the fact that we are neat guys.

Once you get caught in the rain, that’s it, you have to wash , it will pick up dust and be dirty, as if we were living in a barn.

And the second disadvantage is that it is very difficult to disassemble for washing . In fact, only the casing and the small cover from the crossbar can be washed in a machine. The rest cannot be removed from the stroller; you have to wash it in a non-disassembled form.

But we must pay tribute - everything is washed easily , the stroller dries quickly, on the balcony in the summer in about 6 hours.

It's also not at all wear-resistant.

In general, the coating on the handle is very pleasant and comfortable, but it is also not strong at all, it burst during use.

The chassis itself is metal, but the paint is also not wear-resistant and is scratched.

Another disadvantage is that there is no rear crossbar to, for example, drive onto a curb. You have to lift the front wheels by pressing on the handle, which is not always convenient.

Now about the characteristics

Weight approximately 10 kg.

The unit can be installed on the chassis in two positions, towards you and away from you. It detaches from the stroller very easily. We always travel only for ourselves; it’s more interesting to look at those around us.

The handle has positions from the highest

The position of the handle is also very easy to change; you just need to press the two gray buttons on the sides.

Footrest made of eco-leather

It goes down by pressing two gray buttons on the sides, it goes up even easier, you just need to pull it up.

of the stroller also unfastens , whether for ventilation or to take it apart, I don’t understand.

folds very easily, you just need to press two buttons and fold it, it looks so easy when folded in the trunk of a sedan. But it can be folded even more compactly.

It unfolds in one motion.

The wheels are also very easy to detach. By the way, they are not inflatable, just rubber.

Step-by-step cleaning instructions

To ensure that your child’s vehicle does not become deformed from washing or become covered with cracks, stains, or creases, you should follow the following rules:

1. To choose a washing method, the composition of the material from which the stroller is made is taken into account. For example, if all the removable parts are made of raincoat fabric, then they can be washed in a machine. If these parts are combined with artificial leather, the stroller can be washed by hand.
2. Individual parts may require different cleaning methods. For example, a hood is machine washable, while a bedspread decorated with an embroidered monogram can be hand washed. Hard-to-reach corners are easily cleaned with a steam generator.
3. The bottom of the structure, seat belts, and other non-removable parts are carefully cleaned with a brush.
4. Chrome parts are polished with a damp cloth.
5. The wheels are washed under running water.
6. Hypoallergenic washing and cleaning liquids are used.

Before washing for the first time, you should check the material for resistance to the selected cleaning agent.

In the washing machine

The fabrics from which stroller sets are made contain structured synthetic fibers. They add strength, water resistance, and increase wear resistance to the product.

Machine washability makes caring for these strollers easy. In this case, all that remains for manual work is cleaning the wheels and the main base.

Washing recommendations:

• all removable elements are placed in a special bag that protects them and the machine from mechanical damage;
• a delicate mode is established;
• the temperature is set to 40C°;
• super rinse function is used;
• push-ups are performed at low speeds.

Automatic spinning and drying cannot be used for parts with insulation. The water drain mode is suitable for them.

as laundry . Regular washing powders can leave streaks on the surface of items. Additional treatment with rinses and conditioners does not make sense.

Manually

If the product contains a leather substitute, artificial PVC fabric, or a lot of accessories, then it requires wet cleaning or hand washing. Considering the lightness and waterproofness of such materials, this most often applies to strollers.

If there is a removable hood and leg cape, their processing consists of the following steps:

1. Soak in warm soapy water for 20 minutes.
2. Carefully hand wash at 50C° with baby powder.
3. Rinse until completely free of soapy water.
4. Light squeezing.
5. Straightening things out.

Products made of PVC, eco-leather, and combined elements require delicate care. They are cleaned with a damp soft sponge. For heavy soiling, add detergent. Remove any remaining water from the surface with a viscose napkin.

Laundry or baby soap and dishwashing detergent are also suitable for hand washing . The criterion for choosing a product is complete rinsing and anti-allergy.

Do not use chlorine-containing cleaning products or subject the stroller to aggressive mechanical cleaning.

How to apply the cleaner?

An alternative to washing is cleaning with foam cleaners for cars and carpets.

Advantages of this method:

• quick and easy application;
• thorough destruction of dirt and rust;
• removing stubborn stains;
• there is no need to disassemble the product.

To use, the contents of the can are sprayed onto surfaces. Dried foam with dirt particles is removed with a napkin, vacuum cleaner or shaken off.

To quickly clean an eco-leather stroller, you can use car interior leather cleaner . In this case, the bonus will be enhancing the color of the stroller, polishing, and eliminating odors and microorganisms.

The video will show you how to clean a stroller with a foam cleaner:

Design features of the transformable stroller

The transformer is considered a universal stroller. If you think that all such vehicles are very similar to each other, then you are deeply mistaken. They have a so-called transformation path (a cradle for a newborn easily turns into a walking version with a different number of backrest positions), which comes in two types:

• minimal - the walking version changes into a cradle for a newborn by folding the backrest into a lying position and placing a carrying envelope on top;
• complicated - the sleeping place must be secured with zippers and buttons.

Review of the classic stroller Silver Cross Sleepover Elegance - video

Characteristics of different types of transformers - table

Traditional, classic, lightweight and mini-transformers - photo gallery

Traditional transformable stroller from the Chinese brand Geoby

The classic transformer is very reminiscent of a cradle stroller

The lightweight stroller has less weight due to the aluminum frame

The mini-transformer for walking is lightweight and has a narrow wheelbase.

Review of the German transformer Cybex CBX Fides - video

What should be included in the transformer package to make its operation as comfortable as possible?

The basic package of transforming strollers usually includes everything necessary for the comfort of mother and baby:

• carrying bag (for traditional models). It is comfortable to carry a child in it, even when he is sleeping;
• raincoat. It will save your child from dampness and moisture if it rains during a walk;
• mosquito net. It will not allow insects to get to the baby in the summer;
• a bag for Mother. A lot of necessary things will fit there (diapers, bottles, toys, etc.);
• insulating cover for the legs. It is necessary for protection from wind and bad weather;
• basket for things. It is convenient to use for folding heavy shopping bags;
• handrail for the walking block. While the stroller is moving, the child can hold on to it, and he will not allow the little one to fall out of his transport.

Are there differences for different models?

Types of children's vehicles are divided according to their main characteristics into classic, recreational, and transformers. They differ in purpose of use and functionality.

It is impossible to separate them into separate groups based on the type of cleaning - all strollers, even of the same brand, differ in the material of manufacture, assembly method, and completeness.

In addition to the manufacturer’s instructions, when washing a specific stroller, a combination of factors is taken into account:

1. The degree of disassembly of the structure.
2. Number of removable parts.
3. Composition of the material.
4. Availability of additional accessories.
5. The presence of combined elements.

Types of wheels for strollers

A vehicle can have 4 wheels, 6, 8, 12, but the ride quality also depends on the “chassis” materials and their maneuverability.

Material of manufacture

Plastic wheels are designed to move the stroller on good roads. Their dimensions are small, so the weight of the vehicle is significantly reduced. And if they fit the stroller cane, its weight will be even less. But stones on the road and large potholes along the way are dangerous for such wheels.

Inflatable rubber “chassis” will provide your baby with excellent shock absorption. Shaking is prevented, but the risk of puncture increases (it is unlikely that wheel repair will be avoided). Wheels that ensure smooth transport are often installed on classic cradles for newborns.

Foam rubber wheels.

Wheels made of foam rubber are good for summer walks. You don't have to worry about cuts and punctures. But summer wheels are not recommended for use in cold weather. Due to their rigidity, the stroller will begin to rustle when moving.

Maneuverability

If you want to provide your stroller with excellent maneuverability, install swivel front wheels that can rotate 360 ​​degrees. However, when they encounter an obstacle on the way (dirt, potholes), they begin to rotate, making driving difficult. Therefore, many models have rotation locking (clamps).

Static wheels are useful for walking in any weather. Permanent static “chassis” are difficult to remove, but removable options do not have this disadvantage. Therefore, removable wheels are often included with transformers.

Uneven surfaces are common in cold weather. To improve cross-country ability, large winter rear wheels are recommended. As an example, we can note the products of the Redsbaby company. But to give the stroller stability, we recommend dual front “chassis”.

Cleaning removable elements

The fabric parts of the stroller set can be washed by machine or by hand. The method is selected depending on the degree of contamination, material, presence and structure of the filler.

Mattress (coconut, etc.)

The way to keep a mattress clean depends on its filling. Models with coconut flakes and foam rubber are popular .

Coconut filler does not collect dirt, dust, or odors. Such mattresses cannot be washed, because moisture causes the shavings to lose their orthopedic properties.

If absolutely necessary, they are dry cleaned. The mattress cover is machine washable.

To do this you should:

• remove the cover;
• fasten it with clasps;
• Set the machine to delicate wash and heavy rinse settings.

The foam mattress absorbs odors, dust, and moisture. Considering the structure of foam rubber, it can only be washed by hand, following the instructions:

• soak the product in soapy water for half an hour;
• use a brush to carefully walk in a circular motion over the surface;
• repeat the procedure until the spots disappear;
• Rinse the mattress in several changes of water until the soap scum completely disappears.

cradle

A special feature of the cradle is its dense bottom, made of plywood or fiberboard. These materials should not get wet.

A combined approach is used for cleaning:

1. 
   All removable parts come unfastened.

2. Depending on the type of fabric, they are washed in a machine or by hand according to the appropriate rules.
3. The walls and fixed parts are cleaned with a soapy cloth.
4. Use a cloth soaked in clean water to remove any remaining soap.
5. Surfaces are wiped with a microfiber cloth.
6. The bottom is cleaned with a vacuum cleaner and wiped with a slightly damp cloth.

Cases

Dense, durable fabric is used to make the covers. If the manufacturer allows machine washing, then the sequence of actions is as follows:

• Spread heavily soiled areas with laundry soap and leave for a few minutes;
• put in a washing bag;
• Wash on delicate cycle, high rinse, light spin.

When using laundry soap to dissolve heavy soiling, it is necessary to ensure that the soap does not bleach the treated area of ​​​​the fabric.

If only hand washing is allowed, then the procedure for cleaning removed covers contains the following steps:

• soaking in water with a cleaning agent;
• gently clean the dirt with a sponge or soft brush;
• Gently rinse until any remaining foam disappears.

Bag

To restore the cleanliness of this quickly dirty item, follow these steps:

1. The hard bottom is pulled out.
2. The bag is machine washable on a delicate cycle with minimal speed.
3. Instead of spinning, the water drain mode is used.
4. The washed item is wrapped in a dry towel and gently patted until excess water disappears.

Hand wash is used if the hard base of the bag is sewn inside. In this case:

• the bag turns upside down;
• immersed in a warm soapy solution to the bottom level;
• washes off dirt and stains without touching the bottom;
• rinses under running water;
• straightens out and hangs over the bathtub with the handles down.

Hood

When machine washing a hood, you should follow the following algorithm:

1. Pull out the metal shackle.
2. Wash in an acceptable mode, with intensive rinsing, spinning at low speeds.

The hood can be washed by hand if it contains permanent knitting needles or arcs that give it its shape. For this we use:

• cleansing with a brush dipped in soapy water;
• wiping with a sponge and clean water;
• polish with a clean cloth until streaks disappear.

Caring for an eco-leather stroller

Eco-leather is sometimes used to make baby strollers intended for walking. These stroller covers are not machine washable. Only some types of artificial leather are hand washable. But usually eco-leather can only be wiped with a damp sponge.

An eco-leather stroller is good because it practically does not absorb dirt. In order to maintain its good appearance, it is enough to wipe dirty areas with a damp cloth once a week.

The main thing is not to ruin the appearance of the stroller, and then you won’t have to wash it.

Strollers that do not have a removable cover can also be washed when assembled. If the stroller cannot be disassembled, then you should study its structure in more detail; perhaps some parts can be removed by unscrewing the screws. Direct washing begins from the upper parts. Not only leatherette elements, but also metal parts should be cleaned.

The washing sponge should be dipped in the soapy solution and wrung out. If there is heavy contamination, they are moistened with water and detergent. After the preliminary wash, the stroller is washed a second time with clean water to remove any remaining soap.

If only the upper parts of the stroller are made of leatherette, then there will be no difficulty in caring for such parts. Simply wipe the hood with a damp sponge. But sometimes after drying, due to such cleaning, dark stains may form. This problem can be avoided if you use a steam generator or other household appliances that can generate steam in a horizontal and vertical position.

How to remove difficult stains?

It is possible to remove old stains from the stroller using stain removers and cleaning aerosols. Alternative methods using available home remedies are safer for the child’s health.

Mold

Fungal mold appears when the stroller comes into contact with moisture for a long time. To avoid this, you need to follow simple rules:

• store the vehicle in a dry, ventilated area;
• after exposure to rain or snow, wipe all parts dry;
• After washing, dry the stroller thoroughly.

Chemical antiseptics will help destroy mold. Products that do not contain chlorine are more convenient, for example “Persol”, “Oxy Crystal”.

The order of their application:

1. Dilute with water in the proportion indicated on the label.
2. Treat affected areas.
3. Leave for 15-20 minutes.
4. Rinse and dry the product thoroughly.

Before treating with chemicals, you must wear work clothes, protective gloves, and goggles.

Among the popular methods, the use of soda, 9% vinegar, 3% hydrogen peroxide solution, and tea tree oil is popular. A slurry is made from soda and water, 1 tsp. oil dissolves in a glass of water.

Liquids are poured into a spray bottle. Apply the selected product to areas with mold and leave for 2-3 hours . After drying, the treatment areas are thoroughly wiped with a viscose napkin.

Traces of milk

Oxygen stain removers in the form of a pencil, for example Faberlic, UdalixBaby, are suitable for removing milk marks.

Rules for their use:

• wet the stain;
• rub with a pencil until foam appears;
• after 10-15 minutes, remove the residue with a cloth;
• if the milk traces are old, then you need to repeat the procedure several times.

Popular wisdom suggests using chalk, salt, sodium borate . Crushed chalk or salt is sprinkled thickly on the soaked spot in the evening. In the morning, dry crumbs are brushed off with a brush.

The dirty area is treated with an aqueous sodium solution. After half an hour, the solution is thoroughly washed off.

Advantages and disadvantages of transformers

If you purchase a transforming stroller, you will receive several significant advantages compared, for example, with a modular one:

• one block that can easily be transformed from a cradle to a walking one;
• backrest with several tilt angles, including horizontal position;
• reversible handle with adjustable height, allowing the baby to be positioned both facing the mother and in the direction of travel. This becomes especially important when you need to protect your child from the wind or bright rays of the sun;
• smooth ride. Large wheels and shock absorbers make this stroller comfortable for your little one even when the road condition leaves much to be desired;
• The basic package includes a carrying bag, with which you can bring your baby home from the street without waking him up.

The transformer folds like a book, which is both a plus and a minus. This mechanism is quite simple to use, but at the same time, the folded stroller takes up a lot of space, so it may not fit in the trunk of your car.

When folded, the stroller takes up a lot of space in the trunk of the car.

Disadvantages of the transformer:

• heavy weight;
• difficulty in steering due to the massiveness of the stroller;
• no swivel wheels.

According to the manufacturers, the transformable stroller is suitable for children from birth to 3–4 years old, but judging by the reviews, it is comfortable to use up to a maximum of two.

Whitening methods

It is possible to refresh the color and return the whiteness to the parts of stroller transport by bleaching. The product used depends on the type of material:

1. Oxygen bleaches, as well as hydrogen peroxide, laundry soap, and soda are suitable for fabrics.
   The parts are immersed in an aqueous solution with ready-made bleach or peroxide for the time required for brightening. Small pieces of laundry soap along with baking soda are diluted with a small amount of water. The surface is impregnated with this mixture. After a couple of hours, the products are rinsed with plenty of water.
2. For leatherette, citric acid or juice, shaving foam, and denatured alcohol are suitable. The selected product is carefully rubbed into the part. After a few minutes, the residue is removed with a wet cloth.

If the stroller has reflective elements, then bleaches cannot be used.

How to dry?

You need to dry the stroller so that the parts do not shrink or warp. There are rules for this:

• 
  washed items are shaken and carefully straightened;

• wet parts are stretched onto the stroller frame;
• the stroller is placed in a ventilated place, preferably on a balcony;
• it is not allowed to be exposed to sunlight;
• if there is no balcony, then the structure is installed away from the radiators.

It is recommended to spray the dry parts with a protective agent.

Walking

There are canes and books. Walking sticks are lightweight, compact strollers that are usually not disassembled at all, but simply folded.

Remove the safety lock from the back; it can be a regular hook that secures the stroller. Pull the handles towards each other to fold and in the opposite direction to unfold.

Some manufacturers have a hidden lock. If you don't find anything like a fastener at the back, look under the handles or under the armrests.

Large books are collected according to the principle of transformers.

When folded, pull the handle and wait for a click. There are slots on the sides for the crossbar. You can put a cover on your feet, which is often attached with buttons.

To unfold the “book”, follow these steps:

1. Stand behind the stroller.
2. On the sides of the frame, pull the levers that fix the structure in the unfolded position.
3. At the same time, press your foot against the bar from below.
4. The stroller will fold and you will hear a click.

How to collect after?

The last step in washing the stroller is to assemble it into its normal working position. To do this you need:

1. Insert a metal arc into the hood.
2. Put on and fasten the covers.
3. Fasten the removable parts.
4. If necessary, secure the hood with bolts.
5. Install wheels.
6. Put the cradle and envelope.
7. Hang and place additional accessories.

As a finishing touch, you can pump up the wheels and apply lubricant to their mounting points.

Modular “2 in 1”

Carefully inspect the top of the wheel block. Usually it indicates with arrows where to turn the mount to install the cradle or seat unit.

On most strollers you need to do the following:

1. Turn the hooks on the frame on both sides clockwise.
2. Insert the block bayonets into the holes.
3. Turn the hooks clockwise again.