How to iron a polyester windbreaker: ironing a bologna jacket at home

Thanks to their excellent characteristics, items made from fabrics with polyester fibers have gained immense popularity. Jackets made of bologna or polyester are widely in demand - they are low in cost, very beautiful, strong and durable. To ensure that these items do not lose their quality, it is enough to provide them with proper care and storage, and also know how to iron a jacket correctly.

Proven Methods

As a result of washing, any bolognese or nylon jacket becomes wrinkled. To restore its neat appearance, you can use one of the tips that experienced housewives willingly share. How to iron a polyester windbreaker:

If the manufacturer has not left a prohibition on steaming on the product label, then you should use a steam generator. To do this, you need to set it up for continuous steam supply and bring the soleplate of the iron close to the fabric. Next, you need to run a directed stream along the jacket without touching it with a metal surface. The product is first hung on hangers and placed in such a way that it does not touch, if possible, any surfaces. Steamers have a special stand for this, but you can use the crossbar of a horizontal bar, for example, or a jamb above the doorway.
Another option for ironing a polyester jacket involves placing it on an ironing board. The iron is heated minimally, and a damp cotton cloth is placed on the surface of the product. You should run the iron over it several times until the creases completely disappear.
You don’t have to iron your raincoat fabric at all after washing if you dry it properly. You just need to gently squeeze the fabric with your hands, without twisting - just light squeezing. The remaining wet areas should be blotted with a terry towel, hung on hangers and all folds manually straightened out. This action can be repeated several times until the item is completely dry.
There is another option without ironing. The jacket is hung on hangers, fastened with all buttons and zippers, and hung in the bathroom. The surface of the product should be slightly smoothed with wet hands. Now you need to open the hot water tap (boiling water is welcome). The door to the room must be closed tightly, leaving a couple of minutes for 15 - this should be enough to completely smooth the material. After this, the jacket should be dried at room temperature.

How to clean a blazer

When taking a crumpled item out of the closet before smoothing it out, the question arises - how to clean a bologna jacket. They often get dirty and covered with grease stains and dirt stains. What products will be needed for cleaning:

wet wipes. If these are not available, a regular or soft, clean cloth will do;
stain remover When it is not at hand, purified gasoline will do the job;
additional soap-based stain removers.

Attention! It is necessary to distinguish between refined and regular gasoline. It is necessary to use it cleaned, it does not leave stains behind. You can buy it at any hardware store - it is sold for refilling pocket lighters.

In order to begin cleaning, you must first smooth it out. This is done by shaking thoroughly. During this procedure, any remaining dust that may interfere with further cleaning is removed. Then you pick up a cotton wool disc, pre-soaked in gasoline. To avoid surprises that could be unpleasant, clean the cuffs from the inside out.

To remove a dirty stain, the area around it is moistened with plain water. This will prevent it from spreading to the sides during removal. Wipe around the circumference, from the edges to the center. Do not press on the cotton swab. This may damage the fabric. If you can’t remove it in one go, you need to let the stain dry, and only then clean it again.

After removing all stains and dirt, the Bolognese jacket must be washed by hand. Water should not exceed 30-35 degrees Celsius. The products used must be marked “for synthetic fabrics”. It is important to remember that Bolognese jackets do not tolerate bends and creases. As a result, they can be severely deformed when dry. You need to rinse thoroughly, then when drying there will be no streaks from the powder.

Ideally, after rinsing, the jacket should be hung by the shoulders on a hanger. Excess water will be carefully removed from the fabric without causing damage. In cases where insulation that takes up a large volume is used in the manufacture of jackets, it is necessary to read the care instructions. It's on the label. In some cases, if the material allows it, the item is blotted with a towel to absorb excess moisture. This is done in a strictly horizontal position.

Features of polyester fabric

For designers, this artificial material is particularly attractive because it allows you to create not only light blouses and sundresses, but is also perfect for sewing outerwear. The items are original, with excellent heat-protective and moisture-proof properties. In order for the appearance of your clothes to remain impeccable for as long as possible, you should carefully study the manufacturer’s recommendations - whether it is possible to iron nylon with an iron. The label always indicates the temperature for both washing and ironing a particular item.

In general, caring for things made of polyester is simple: they are easy to wash, they dry quickly, and their appearance is easy to restore.

The basic principles for caring for polyester, bologna or nylon jackets are as follows:

choose a delicate wash cycle;
water heating should be 40 degrees, in rare cases - 60;
use detergent for synthetics;
do not bleach products;
turn inside out so as not to deform the fibers from the outside;
rinse in warm water with vinegar added
squeeze in a gentle mode;
hang on hangers to dry;
iron at minimum temperature;
Iron the creases through a damp cotton cloth.

On a note! It should be remembered that polyester quickly ignites and melts, so it is important to observe the minimum temperature conditions when ironing the product.

What is possible and what is not?

When ironing your jacket, you must adhere to the following recommendations:

Before ironing, check the composition of the fabric.
If you are in doubt about the ironing temperature, you should start with the minimum temperature, increasing it gradually.
It is forbidden to iron the product from the front side.
During exposure to a steam generator, iron or steamer, you should not adjust the item to avoid getting a thermal burn.
Do not increase the heating temperature higher than indicated on the product label.
You cannot put on an item after ironing until it has cooled down.

Using an iron

How to iron a jacket? First of all, you need to study the label on the jacket. A crossed out iron categorically prohibits ironing; in this case, it is better to use one of the methods described above. If there is no prohibition, then here’s how to iron a bologna jacket.

To avoid the appearance of shiny places, which is especially noticeable on dark fabrics, you should iron the product through a cotton pad (many manufacturers offer special ironing irons). In addition, the iron often includes a special sole made of fluoroplastic.

On a note! Of all the materials, calico is best suited; in extreme cases, gauze. Synthetics are unacceptable, even with impurities. In addition, you should not use a spray bottle, as it may leave small specks on the fabric. The calico should be wet and wrung out well, this will make ironing easier.

You can only iron a clean item, otherwise dirt will eat into the fibers. Even if it seems that after rain or a long trip on the subway or train, the jacket looks clean - before ironing the polyester windbreaker, it is better to wash it first.

Original products with many decorative elements should not be ironed; it is better to use steamers or home methods.

We recommend:

How to properly iron a leather jacket

Ironing too often is harmful. It may cause deformation and discoloration.

A jacket with insulation should be ironed completely, and not just those places that are wrinkled. Otherwise, the insulation will be pressed unevenly.

Prevention

In order not to look for how to iron a jacket yourself, you need to store such products correctly.

Always use the right size hanger. Such things should not be placed folded on a shelf; they should always hang on hangers.

Also, leather jackets should be stored in a closet with adequate space. To avoid pressure from other clothes, store them a short distance apart.

As you can see, there are many smoothing methods, but each of them has its own nuances. Before attempting any method of removing creases, become thoroughly familiar with the method you choose.

Special fabric

Modern manufacturers often sew windbreakers from membrane fabric.

It should be understood that the membrane is a polymer film with microscopic pores. The thickness of this film does not exceed a tenth, or even a hundredth of a millimeter. But the main feature is in the pores, which have the ability to allow moisture to pass through only on one side, and on the other, to retain it almost completely. Thanks to this property, human skin breathes and sweat is removed outside.

The membrane does not exist as an independent material; it is “welded” to polyester or any synthetic fabric. The higher its technical characteristics, the stronger and lighter the membrane fabric is.

The structure of the fabric is destroyed under the influence of high temperatures. That is why it is strictly forbidden to iron it, as well as dry it using heating devices or near an open fire. Therefore, before ironing a membrane windbreaker, you need to look at the label.

Multi-component “bomb”

A quick and effective home remedy for wrinkles in artificial leather. To prepare it you will need drinking water, table vinegar (9% alcohol solution) and fabric softener - all products in equal proportions.

Procedure:

hang clothes on hangers over the bathtub or sink; mix the ingredients; pour the product into a container with a spray bottle; Spray the mixture liberally onto the surface of the jacket (raincoat, etc.)

d.), paying special attention to the places of the deepest dents; leave the clothes to dry in the bathroom. Any of the described operations with leatherette should be carried out carefully

Then the jacket or raincoat will again acquire an excellent appearance and will delight its owner for a long time

Any of the described operations with leatherette should be carried out carefully. Then the jacket or raincoat will again acquire an excellent appearance and will delight its owner for a long time.

When one season gives way to another, many of us put warm clothes in the far corner of the closet. They are placed on shelves and compacted, which leads to the appearance of folds, creases and visible traces of storage on outerwear.

But as soon as the wind blows and it gets cooler, their favorite things are released from captivity, wrinkled and unkempt.

It is possible to quickly solve such a problem using several methods, using available tools

, which can be found in every housewife’s home. Similar methods and step-by-step instructions will be given in the article below.

Properly ironing a jacket, coat or bag made of leatherette means extending their service life and saving yourself from additional expenses. Things made from genuine leather are more expensive and more difficult to care for and wear, while leather substitutes cost less and are more durable, so they are deservedly popular.

After taking the item out, simply hang it on a hanger. Give her the opportunity to deal with it on her own, without your help.

If within a few days the folds and creases on the leatherette jacket have not gone away, then you should move on to more drastic measures - applying temperature or hot steam.

Ironing

Using this method, the main condition will be maintaining the temperature (not higher than 30 degrees),

turning off the steam function on the iron, minimal pressure on the device and ironing the item turned inside out.

You should also understand that if done incorrectly, the jacket can be irreparably damaged.

Actions must be clear, accurate and step-by-step:

Set the iron to delicate ironing mode and turn off the steam function. To avoid deformation of the leather under the influence of heat, check the correct temperature using the tip of the iron sole, on the wrong side of the item, where it is not visible.
Turn the jacket with the lining facing up. First, smooth out any visible unevenness with your hands.
Place a piece of smooth cotton fabric over the areas where the leatherettes come into contact, as sticking may occur under the influence of temperature. Be sure to do this when the lining material is thin or missing.
Turn it back inside out.

Hang on a hanger, adding volume using filler from disposable bags or strands of towels. Another option is to put an ironed jacket on yourself and walk in it for about an hour so that it remembers the contours of your body.

Steaming

A more gentle and safe way. In order for everything to work out well, you need to do the following:

Find soft hangers that fit the size, roll up rolls of terry towels and insert them into the sleeves.
For the process, take a steamer or iron (set the vertical steaming mode).
We process small areas, at a distance of 10-15 cm from the item.
We act for 5-10 seconds on those places where there are irregularities.
Leave it alone for 30 minutes.

Hairdryer - ironing with hot air

If you are afraid to use an iron and do not have a steamer, take a hair dryer to help.

Additionally, for the procedure, prepare a wet handkerchief or piece of fabric, a blanket.

Roll up the blanket and put it in your jacket.
Cover the place where hot air comes out of the hair dryer with a piece of cloth.
Turn on high mode. Blow the jacket at a distance of 20 cm.
Leave the item to cool.
Try again if not all areas are smoothed out.

Ironing a wrinkled product after purchase

After purchase, a new item may become wrinkled if it was not stored correctly in the store. Before embarking on radical methods of restoring a leather jacket, you can try to get by with light measures - just let the things hang on a trample.

But this method is only suitable for jackets made of thin leather that is not too wrinkled. If simply hanging on a hanger doesn't help, you can try the other methods listed above.

Stores that specialize in selling items made of genuine leather have special steam generators that are designed to straighten wrinkled items. You can simply ask to put things in order.

Washing raincoat outerwear

Dishwashing liquid

One of the most popular methods for removing greasy jackets at home is using dishwashing detergent. Apply the gel directly to the dirt, avoiding contact with clean areas. This can be done with a damp sponge or cotton wool, and then be sure to remove any remaining foam with a clean cloth. Under no circumstances should you completely wash an item with dishwashing detergent. It is not intended for these purposes and is only suitable for pre-washing greasy areas.

Carry out a thorough inspection of the pockets.
Unfasten the fur collar and cuffs.
Check the strength of the buttons and rivets. If something is ready to come off, you better do it yourself. Reinstall later.
Look carefully to see if there are any torn seams. An unsewn hole can cause a lot of trouble. During washing, the filling may crawl out of the jacket into the machine. And this is a death sentence for the jacket.
Close all zippers and turn the item inside out.

How to deal with deep folds or creases

If a wrinkled jacket shows severe creases, you can lubricate it with grease, moisturizer, clear shoe polish, or leather spray. They will make the skin more flexible and it will smooth out better.

After this, you can carry out the steaming procedure, repeating it if necessary. If the folds are not eliminated, the leather jacket can be ironed, following all the necessary rules. In this case, you cannot increase the temperature above 100 degrees and increase the exposure time on the area. If heat treatment has no effect, it can be repeated only after the jacket has completely cooled.

We fight old stains of unknown origin

To remove this kind of stain, we use hot potato starch. We wet the dirty areas of the bolognese jacket and leave it for a while. Afterwards, we will walk over the surface with a dry cloth to dry the product.
Also, the crumb of any bread will help to clean a Bolognese jacket from all kinds of stains, including vegetable oils. Crumble onto dirty spots and leave the bread for several hours. When the crumb has absorbed all the dirt, wash the item with powder. If you don’t want to completely wash your jacket, you can only wash the treated areas.
Stubborn dirty stains can be dealt with with dishwasher. Place a few drops of dishwashing liquid on the stains and use your finger to work the solution into a lather. Let it sit for several hours, then rinse everything off under running warm water.
Try using cheap tooth powder. This remedy is also very effective. Sprinkle all dirty areas of your jacket and scrub with a rough brush. Finally, wash and dry the product. The stains should “leave” your blazer.

We suggest you read: Choosing what to lubricate car door hinges to prevent them from squeaking