How to clean mosquito nets on plastic windows?

How to care for a mosquito net?

Why and how to care for mosquito nets

The mosquito net can be vacuumed or brushed over it with a soft brush. In this case, we do not recommend using brushes with hard bristles - they can damage the canvas.
After this, the mosquito net can be washed in the bathroom with any detergent and dried there.

Interesting materials:

There is no sound on the computer, what should I do? The laptop is working but the screen is black, what should I do? The laptop is getting very hot, what should I do? The laptop turns on but the screen is black, what should I do? The laptop turns on but the screen is black, what should I do? New moon what to do? Is it necessary to do land surveying when selling a summer cottage? Is it necessary to install a self-leveling floor under linoleum? Do I need to update the software on a new phone? Is it necessary to optimize SSDs?

How to remove it from the frame?

To wash the mosquito net, you need to remove it from the fastenings. It's easy to do:

It is necessary to remove pots and other objects that may interfere with the windowsill.
Read also: Standards for normal air humidity in rooms of different purposes
With your fingers you need to grab the ears that are on all mosquitoes.
Holding them, the structure is lifted up so that it comes out of the lower grooves.
The bottom of the canvas is directed towards the street, but you should not lean out of the window too much.
Then you need to lower the mesh down so that it comes out of the upper brackets.
All that remains is to turn the net upside down and bring it into the apartment.

If the grid is attached to flags, then to gain access to them you need to open a second window and turn them to the side. When fixing the product on plungers or hooks, you will need to loosen their fastening.

The video will show you how to remove a mosquito net:

How to clean plastic window frames?

Typically, plastic frames do not require extensive washing from the inside. If you regularly wipe them with damp wipes or a cloth, dust will be removed in a timely manner and will not accumulate in large quantities.

It's a completely different matter from the street side. Especially if the windows do not face the courtyard, but onto a busy avenue. A layer of dust, dirt, and soot from exhaust gases and from heating plant pipes settles on the frames. In winter, it is impossible to wash the frames, and in a few months they can turn from white to black. First of all, you need to collect a lot of dirt. If you don’t do this and immediately start washing the frame with water, the dirt will flow down, and the neighbors are unlikely to like this.

You can collect settled dust with wet wipes. It will take a lot of them, perhaps a large package. Once there are no traces left on the frames, you can begin to wash them. To start, you can use soapy water and a rag that can be wrung out well. Do not allow downward drips. Dirt from the cracks between the glass and the frame can be removed with a toothpick or cotton swab. After washing with water, wipe the frames dry using a clean rag or paper towels.

Household chemicals

You can get rid of dirt on the mesh using household chemicals. Top 3 inexpensive and effective remedies:

Dishwashing liquid . It needs to be diluted in warm water and whipped until foam forms. The mesh is placed vertically in the bath at a slight angle. The solution is applied to it with a brush, left for 15 minutes, after which they pass over the surface of the product again. Wash off dirt and foam with a shower.
Liquid soap . It is used in a similar way to dishwashing detergent.
Washing powder . Before use, it must be thoroughly dissolved so that no visible granules remain in the basin. It is best to use hand washing powder that does not contain bleach.

If the mesh has not been washed for several seasons and is very dirty, it needs to be soaked. To do this, take a full bath of water and immerse the product in it. To prevent it from floating, place a small weight on top, for example, a towel. After 15 minutes, wash the frame using the selected product.

When starting cleaning, you need to be prepared for the fact that after getting wet, the product will emit an unpleasant odor . Therefore, it is better for people suffering from allergies to ask their household for help.

How to clean a mosquito net, video instructions:

Where to start cleaning a mosquito net

First you need to dismantle the product. To do this, you just need to pull the grid up. Once it comes out of the mount, it can be removed without any problems. Next, you need to prepare a solution for washing the product. It is worth noting that in order to obtain a high-quality result, you will definitely need to perform dismantling work. It is extremely difficult to wash the product on site.

After removing the mosquito net, you can clean the window. It is recommended to wipe the glass, frame and individual elements of the product. After this, you can proceed directly to cleaning the mosquito grill.

How often should you wash?

The mesh must be washed as it becomes dirty. If a person suffers from allergies, then rinse it at least once a week.

You should take care of the product with the same frequency if you live near highways or objects under construction. There is no need to use chemicals every time. It is enough to rinse the frame with running water .

If the windows overlook a park or other dust-free landscape, then you can wash the mesh once every 2-3 months.

However, if it comes into contact with visible contamination, such as bird excrement or insect excrement, cleaning should be carried out immediately. Such substances are very caustic, and therefore can lead to the destruction of fibers and their burnout.

Mistakes when washing mosquito nets

If you wash the mosquito net incorrectly, it will quickly deteriorate, and after 3-4 years you will need to look for a replacement. With the right approach, this will not take 8–10 years.

What not to do?

Use aggressive detergents. No, the mesh will not burn or melt, but the special coating will be damaged. It protects the cell material from the scorching sun, low temperatures and other destructive factors.
Use food vinegar. It acts as a solvent and will also damage the protective layer of the mosquito net.
Use sponges, cloth rags, napkins for washing. Small fibers will clog the cells, prevent air from entering the apartment, and collect even more dust.
Use stiff brushes. Let's take care of the coating again, don't rip it off.
Pour the mesh with a hose or shower head at a right angle: this stretches the material. It makes more sense to position the jet from above at an angle of 30–45°.

Don't forget to work carefully. The nets are not deeply fixed in the grooves of the frame; even if pressed accidentally, they can pop out. It is unlikely that you will be able to insert it yourself. Also, excessive pressure often leads to stretching of the material, bumps and folds appear. It looks unsightly, attracts unnecessary attention, and affects air circulation.

So, you can wash a mosquito net in 10 minutes. Don't put it off - just use the right water and one of the simplest cleaning solutions.

Mesh cleaning steps

The net must be removed from the frame and placed on the floor. If the vacuum cleaner can be set to low power, carefully walk it on both sides of the screen. Transfer the mesh to the bathroom, place it on the bottom and rinse with water from the shower, after applying dishwashing gel. It is easy to spread it over the screen using a sponge. After rinsing the screen on one side, do the same on the other. After drying the mesh, you can spray it with steam from a regular iron or steam generator. This procedure will help get rid of small insects and microorganisms. Before placing the mesh in the frame, it is advisable to draw insect repellent chalk on it, paying more attention to all seams.

Every day you need to pat the mesh with your palm to shake off dust, and once a week sweep it away with a brush. If the house does not have a bathroom, it is convenient to take the net into the yard and spray it with water from a watering hose. At the same time, you should not overdo it with the power of the jet, so as not to tear the canvas out of the frame. For the winter, many people remove their nets. In principle, they are not needed, but they can be used as a collector of dust and exhaust particles. In winter, you can take the nets out into the snow and carefully sweep away the dust with a brush, and wash them at home. Alcohol wipes, vinegar, and antifungal agents can be used as disinfectants.

Mix vinegar with water in a ratio of 3:2, pour the solution into a spray bottle and spray it over the entire canvas and especially along the seams. The vinegar will quickly dissipate and leave no odor. This procedure can be carried out once every 2 weeks. Corrugated mesh is more difficult to clean, since it becomes more dirty and the folds make the fabric more fragile. Each fold must be washed carefully, working on a horizontal surface. You can also use a vacuum cleaner with a soft brush. However, the work will take place at a slower pace in order to maintain the integrity of the network.

Recommendations for removing mesh

Regardless of what type of product you have installed, if you decide to remove the mesh, you should choose dry, calm weather. The mesh has a large area, so a gust of wind can tear it off when you unscrew it, or tear it out of your hands. If it falls to the ground, the frame is likely to break. The rain will drip into your face, which is not very pleasant.

If the structure has shutters, then you won’t have to think about how to remove the mesh from the window . You just need to open one leaf and unscrew the external fasteners.

Why wash the mesh?

Timely washing of the mosquito net helps to avoid most problems and unnecessary expenses for repairs.

By rinsing the mesh in time with warm water, you:

You clean its canvas from dust, fluff, and pollen that has settled in the cells. If you leave it on the mesh, dirt will get inside the house when it is ventilated.
Remove insects stuck in the mesh and small debris that may have been blown by the wind. All this makes the net attractive to birds, which can damage the canvas with their beaks or claws - it is better to get rid of the debris in time.
You return the grid to its additional functions. Only a clean mosquito net can be a filter that prevents dust and allergens from entering the house.

Another plus is that regular washing makes the mosquito net more aesthetically pleasing and neat in appearance.

Cleaning mosquito nets with compressed air

There is another cleaning strategy for mosquito nets, be it pleated or standard mosquito nets. We are talking about compressed air. A can of compressed air, if used properly, can be sufficient to remove dust from an entire door screen or two (smaller) window screens.

Simply direct the air stream at the surface to be cleaned, stopping in areas where more dust accumulates. If you damage your mosquito net screen during the cleaning step, know that it can be replaced or repaired.

♦ How to make your own can of compressed air

How to clean mosquito nets with a brush

Even if a vacuum cleaner is the most effective and fastest solution, not everyone can dose the power correctly. Those who do not have a vacuum cleaner or have one that is too powerful can solve the problem by cleaning the mosquito nets with a brush.

It's easiest to clean mosquito nets outdoors, as you'll need plenty of space to work with. If you don't have this option, you can clean them in the bathtub, basement or garage.

It is important to use soft bristled brushes to avoid damaging the mesh. Also in this case it will be necessary to clean from top to bottom. Once the entire surface is cleaned, you can use a spray solution containing 60% vinegar and 40% water.

Folk remedies

To get rid of accumulated dirt, it is not necessary to purchase expensive compounds. You can wash the mesh using folk remedies.

Ammonia

If the product is very dirty, it is recommended to use ammonia.

Procedure:

pour warm water into a basin;
add ammonia to it in a ratio of 1:3 and mix;
rinse the mesh under running water;
dip the brush into the prepared solution, clean the mosquito on both sides, pay special attention to stubborn dirt;
Rinse the product in clean water, let it drain, and wipe with a dry cloth.

Lemon juice

Lemon juice works well for stubborn stains. Moreover, it is absolutely harmless to the material from which the mesh is made. To prepare the solution you will need 1 liter of water and the juice of one lemon.

The procedure is as follows:

Rinse the mesh under the shower.
Pour the solution into a spray bottle.
Moisten the surface to be treated.
Leave to act for 10 minutes.
Rub the mesh with a brush, rinse with clean water, and dry.

Baking soda solution

You can use a baking soda solution to remove dust and dirt. To prepare it, dissolve 1-2 tablespoons of soda in 1 liter of water.

Instructions for use:

moisten a brush with soft bristles in a soda solution;
with its help, apply the product to the surface that needs cleaning;
leave for 5-10 minutes;
wash off the composition with clean water, especially contaminated areas are additionally cleaned.

When brushing the surface, do not press too hard on it. Applying excessive force will cause the material to stretch and bumps will appear on it. They look unsightly and have a negative impact on air circulation.

Weekly care rules

To prevent seasonal cleaning of the mosquito net from turning into a real epic, we recommend carrying out simple procedures once a month:

wipe the top layer of dust with a damp cloth or a special broom;
To remove dirt, it is convenient to use a regular vacuum cleaner - turn on medium power mode, install a soft brush attachment and walk over the entire surface of the mesh.

Such simple cleaning options are ideal for washing swing mosquito nets, which are most often installed on balcony doors.

We recommend reading how to wash your hands of Moment glue.
Read: is dichlorvos effective against cockroaches, moths and bedbugs?
Find out how to use Laska gel for washing.

How to remove tape from a plastic window?

After installing a window, you often have to remove the adhesive tape from the plastic. Unfortunately, this does not go unnoticed. The tape leaves sticky stains to which dust quickly sticks.

It is better to remove traces of tape immediately before the glue hardens. You need to glue a new tape to it, press it and quickly remove it from the plastic surface. The procedure may need to be repeated several times to completely remove the marks. If the glue has not completely come off, you can use an eraser.

A product for removing tape marks from plastic can be prepared from baking soda and water. The soda must be diluted with water so that it resembles the consistency of sour cream. Apply the paste to the tape stains and leave for 2-3 hours. Afterwards, wash everything off with a wet cloth. If the marks do not wash off the first time, you can repeat the procedure.

Possible mistakes

If you wash the mesh incorrectly, it will quickly become unusable, but with the right approach, the product will last at least 8 years.

Mistakes to avoid:

Aggressive compounds should not be used. They negatively affect the strength of the fibers, which will quickly collapse under the influence of the scorching sun and rain.
It is not recommended to use vinegar. It is especially dangerous to use the essence.
There is no need to wash the mesh with sponges or lint rags. Small particles will settle in the cells and prevent air flow from entering the room (more dust and allergens always settle on the fabric).
When choosing a brush for cleaning mosquitoes, preference should be given to products with soft bristles. Metal brushes should not be used.
The stream of water from the shower should be directed at an angle of 30-45 degrees. If you pour water directly, the mesh will stretch.

When using detergents, you need to take care of the safety of the skin of your hands by protecting them with rubber gloves.

Helpful information

Tips for caring for a mosquito net:

You need to remove the mesh in dry, windless weather, because... gusts of wind can tear it out of your hands and cause it to fall;
when removing the mesh, you should not lean on it - the structure will not be able to support the weight of a person;
You cannot put too much pressure on the mesh so as not to tear it.

If the product is not heavily soiled, you can clean it using the dry method. A vacuum cleaner is used for this, but only equipment whose power can be adjusted manually is suitable.

The choice is made in favor of a nozzle with a textile spout. The power should be set to minimum.

The frame is placed on a towel or other material of a suitable size and carefully passed over its surface with a vacuum cleaner. This cleaning will get rid of loose dirt :

from dust,
cobwebs,
plant pollen.

It is recommended to vacuum the mesh on both sides.

You will find a lot of important and useful information about fast and effective window cleaning in this section.