The appearance of an ink stain can take many people by surprise. Do not rush to part with a soiled item. There are many good techniques to solve this problem. Moreover, it is not necessary to go to dry cleaning. In every home there are always tools that can remove ink stains, be it clothes, furniture or wallpaper. Take note of these methods and use the ones that are most suitable for your particular case.
How to remove paste from a pen on white?
The most common and effective means for removing a pen from a white shirt, dress, or T-shirt include the following:
- Mustard powder;
- Starch;
- Lemon juice;
- Acetone with added hydrogen peroxide;
- Milk (both regular and sour);
- White chalk;
- Baking soda;
- Table salt with added alcohol;
Interesting materials:
Why doesn't my phone see the USB flash drive? Why can't my phone see the connection to the computer? Why doesn't my phone recognize wired headphones? Why can't my phone see the Android SD card? Why doesn't my phone boot up completely? Why doesn't my phone charge the battery? Why does my phone heat up very quickly? Why did the phone stop seeing the micro SD flash drive? Why did my phone stop seeing my Android memory card? Why did the phone stop seeing the micro memory card?
How to wash a ballpoint pen from the leather of a sofa and other products
Sofas are a favorite place for children to play. They often stain them, including with a ballpoint pen. To get rid of these “arts”, you need a lot of effort and knowledge of how to wash a ballpoint pen from a sofa in order to get rid of stains and not spoil the finish of the product.
Sometimes parents may come and find that a sofa or other piece of furniture covered with leather or leatherette has been almost destroyed by ink. Is there a chance to bring the product back to normal without resorting to the services of expensive dry cleaners? If we are talking about the upholstery of the sofa, then you can clean it with a slice of regular lemon. They rub it on all dirty places, achieving absolute cleanliness. And when the juice dries, the surface is wiped again, only with a cotton pad previously treated with salt water.
Masking errors with office supplies
To remove unnecessary inscriptions, mask clerical errors, blots and errors, a special stationery proofreader is suitable. This white liquid with a thick consistency is designed specifically for covering ink streaks. There are many forms of such devices: with a brush, an applicator, in the form of a pencil with a metal tip, and other options. It is enough to apply a little paste to the stains and wait until the composition dries completely.
The proofreader is indispensable for office workers and other people who deal with various documents. It is important to remember that some types of official documentation (for example, sick leave, work book) should never be corrected with white paste. Such records will be considered invalid in any case, no matter what you try to erase the ballpoint pen with.
If unwanted lines from a pen appear on a piece of paper or other surface, do not panic. It is important to choose an effective product or prepare it from available ingredients and follow all the rules of use. If the manipulations were carried out correctly, not a trace of the pen will remain, and the structure of the paper will not be damaged.
Removing "blots" on gloss
It is very easy to remove ink from smooth glossy paper, especially if the sheet is white.
Alcohol-containing liquid
Peculiarities. To remove ink, both medical alcohol and any alcohol-containing liquid without dyes will work.
How to act
- Moisten a cotton pad with alcohol.
- Carefully erase the inscription made with a pen from the glossy paper.
- Wipe with a dry cotton pad or napkin.
It’s even easier to remove stains using an alcohol wipe, which doctors use for disinfection.
Eraser
Peculiarities. To remove ink from glossy paper, both a fountain pen eraser and a regular pencil eraser are suitable.
How to act
- Gently erase the ink with an eraser.
- Use a dry cloth to wipe off any pellets.
Glycerol
Peculiarities. Removing pen stains from colored paper is more difficult. Another task is added - to avoid the appearance of a lightened area on the painted sheet.
How to act
- Mix ethyl alcohol and glycerin in equal volumes.
- Apply the compound only to the ink that needs to be removed.
- After the stain disappears, blot the cleaned area with a damp cotton pad.
- Dry the sheet and iron if necessary.
Determining the type of ink
Before you begin the experiment with removing ink, you need to determine which pen the inscription was made with:
- ball;
- gel;
- oil;
- ink;
- capillary (felt-tip pens and markers).
Depending on the type of paste, you will need different means to remove it. If it is not known what the inscription was made with, you will have to resort to the experimental method. Chromatographic identification of ink is only possible for forensic scientists, so stock up on different types of pens, draw lines on an identical sheet of paper and compare them with the sample.
Important! Before removing ink from the original, try the method on the back of the document or a similar piece of paper.
Mechanical impact
There are ways to remove inscriptions made with a pen using mechanical action.
Important: when using such methods, there is a high probability of irreversibly damaging the paper.
They require extreme accuracy and dexterity, but at the same time they are highly effective.
Razor blade
This removes the ballpoint pen from the paper. A sharp new blade is required for the job. The inscription is scratched with the corner of a razor blade. In this case, noticeable marks remain because the paper fibers are damaged.
The second method: press the blade firmly against the sheet and carefully cut off the top layer of paper fibers. If everything is done carefully, manipulation of records will be very difficult to notice. For greater effect, after removing the ink layer, you need to run your nail along the treated area along the paper fibers several times.
Sandpaper
The inscription can be removed by rubbing it several times with a piece of fine-grained sandpaper (No. 0). Movements are made in one direction, along the fibers.
Curdled milk
Peculiarities. Instead of curdled milk, you can use fresh milk, the discoloration effect will be the same.
How to act
- Apply the product to the blot with a thin brush.
- Wait until it dries - the ink will discolor.
Eraser
Using the corner of a new eraser, carefully process the outline of the inscription, trying not to affect adjacent areas.
Medical adhesive plaster
It or tape can also be used to remove ink from paper. In this case, it is better if the paper is unlined, since as a result of exposure, the top layer of paper fibers is removed. The patch or tape should be pressed tightly against the inscription and then carefully removed.
Abrasive paper
This is the same as sandpaper, so the principle of action for deleting records is absolutely the same.
How to remove ballpoint pen from wallpaper
Although children love to draw pictures of sofas, wallpaper is a more favorite object. Sometimes it is enough to leave a child alone in the room for a few seconds for the unfortunate blue lines and scribbles to appear on the walls. And then parents need to think about how to get rid of these drawings, because re-pasting the wallpaper every time after the child’s adventures is not an option.
The easiest way to get rid of ballpoint pen marks on wallpaper is to use hydrogen peroxide. This liquid removes ink, but also discolors the item itself. Therefore, peroxide should only be used in cases where white paper has been damaged. Otherwise, you can spoil the wallpaper even more by “rewarding” it with new stains.
If the pattern appears on colored wallpaper, use turpentine. This is an odorous resin that has a wide range of actions and should be in every home. So, the area damaged by ink is visually isolated and rubbed with turpentine, wait 20 minutes, then wipe with wet cotton, achieving complete removal of the ink. You need to do the procedure quickly and carefully, otherwise you can rub off the wallpaper so that it looks unattractive.
If the drawings appeared on furniture whose upholstery is light and fabric, then another method of removing ink will come in handy. Use manicure polish that does not contain acetone. To do this, soak a napkin generously with this very liquid, apply it to the place with ink and lightly rub it. All movements must be smooth and gentle, otherwise the upholstery can be seriously damaged.
If the damage is too large or the ink was applied to an expensive surface, it is better to call a cleaning company that specializes in this rather than risk using cheap home methods.
How to Remove Ballpoint Pen Ink from Industrial Materials
In extremely rare cases, ballpoint pen ink can transfer to other types of materials that also need to be cleaned. So, sometimes you need to remove a stain from plastic or oilcloth. This is done using an ordinary match. Its head is dipped into water, after which they begin to rub the area with the stain until it disappears. Once success is achieved, the previously damaged area is wiped with a concentrated soap solution.
Removing ballpoint pen marks from paper
But most often, a ballpoint pen leaves unnecessary marks on paper. A child can draw in a valuable book, an accidental blot can end up on an important document, etc. Of course, a printed sheet can be reproduced again, but if we are talking about valuable things, you need to know how to restore them. If you work carefully, you can use one of the following methods:
- Application of vinegar essence with potassium permanganate. To do this, prepare a weak solution of potassium permanganate, to which a little vinegar is added. Moisten a thin brush with the prepared solution. It is guided strictly by the ink itself, trying as much as possible to avoid contact with the rest of the paper. To make the procedure better, place a clean sheet of paper under the document so that it absorbs ink and excess moisture. When the manipulation is completed, the restored object should be dried - it will acquire a light brown color. This stain can be easily removed with hydrogen peroxide and dried.
- Prepare a special concentrated solution, for which you take a few drops of water, dissolving an equal amount of oxalic and citric acid in it. The surface of a cotton swab is treated with this solution, after which they try to remove the ink. Once the process is completed, quickly dry all the paper.
So, having ballpoint pen ink stains on most surfaces is not that big of a problem if you do it right. Selecting the right cleaning product, careful work, following the instructions - all this will help get rid of traces of children's games or a poor choice of pen.
How to wash a ballpoint pen from your skin?
After all, the action of caustic acids that may be in lemon can damage the real natural coating. It is recommended to use regular salt for cleaning. To do this, do the following:
- Regular table salt is lightly moistened with water to keep it moist.
- Lightly rubbing this salt, cover the stained area.
- Leave everything for several days.
- Remove the salt, wipe the surface again and treat with a damp cloth.
- Cover the skin with turpentine and rub until shiny.
Classic solvents - alcohol and acetone - should not be used to clean sofas, the same goes for oil. The reason is that organic solvents, along with the ink, will wash out part of the paint, so a light spot will remain in their place.
But if the housewife is looking for a way to clean a ballpoint pen from a doll, alcohol is just the thing. It will be enough to purchase a bottle of pharmaceutical alcohol, moisten a cotton pad with it and wipe those surfaces of the toy that are contaminated with ink. And it’s even easier to remove stains from linoleum - just treat its surface with a sponge and soapy water. After a few minutes of work, dirt and its traces can be removed forever.
Removing old ink stains
It's time to return a book to a colleague, but there's a dried ink blot on the spread? Don't despair, this can be fixed. To remove stains, you need to make a solution by mixing citric and oxalic acid in equal parts and diluting it tenfold with water. After thoroughly stirring, we begin to wash off the blot by applying the solution with a soft watercolor brush. Be careful not to damage the paper. We rinse until the stain completely disappears. After that, blot the treated area with a paper towel.
All methods require extreme caution and accuracy, so it is worth assessing in advance whether it would be easier to simply rewrite the document or work.
As you can see, skillful hands and knowledge of the basics of chemistry will save you from any ink blots and blots. You just need to act patiently and carefully, following time-tested recommendations.
Use of folk remedies
Sometimes there is no opportunity or desire to resort to the help of purchased funds. Traditional recipes include available components that are safe for humans when used correctly. They do not harm plastic surfaces, because they do not contain abrasive particles or aggressive substances.
Laundry soap
The first thing that comes to mind when you need to clean a plastic product is laundry soap. It is effective both when washing white clothes and when cleaning window sills and countertops. However, it will only help if the material has changed color due to dust or grease. How to whiten yellowed plastic:
- grate the soap on a medium grater or finely chop with a knife;
- pour a small amount of warm water to make a soap solution;
- wash the contaminated areas with intense circular movements using a sponge or soft brush;
- leave the plastic soapy for 30-60 minutes;
- Remove soap residue with warm water.
If the structure of the plastic element has become very dark, then this method will not work. It is recommended to repeat the procedure several times a month and try to wipe the surfaces more often with a damp cloth.
Special napkins
In cases of yellowing of a computer mouse, keyboard or monitor, it is better to use special wipes. They are sold in hardware stores or supermarkets. Plastic can be bleached thanks to the composition in which the napkins are impregnated.
Tooth powder with chalk
To achieve a snow-white window sill, a product made from tooth powder for whitening plastic products will help. It is absolutely safe, has no unpleasant odor and does not damage surfaces. It is enough to slightly moisten the contaminated area, apply powder or chalk and rub with a sponge. Residues can be easily removed by wiping the treated area with a clean cloth. We recommend:
How to whiten underwear at home
Soda and washing powder
Baking soda and clothes washing powder can be used either separately or together. For 500 ml of hot water take 1 tbsp. l. components, mix thoroughly until dissolved and apply to dirty areas. Leave the solution for 8-10 hours, then wash off.
Vinegar
When using vinegar, you should use gloves and a face mask, because the smell of the product is not pleasant
In addition, it is important to avoid getting vinegar essence in your eyes, and wash your hands well after work. Yellowness will be a thing of the past if you treat the stains with vinegar using a cotton pad during cleaning; it is not necessary to wash it off. Housewives know how to whiten yellowed plastic; one way is to use vinegar and baking soda together.
Sprinkle soda generously on the stains, soak a sponge with acetic acid (don’t forget rubber gloves!) and rub the stained areas with a little force. Afterwards, rinse off the mixture with cool water; you may need to repeat the procedure.
Housewives know how to whiten yellowed plastic; one way is to use vinegar and baking soda together. Sprinkle soda generously on the stains, soak a sponge with acetic acid (don’t forget rubber gloves!) and rub the stained areas with a little force. Afterwards, rinse off the mixture with cool water; you may need to repeat the procedure.
Citric acid with chlorine
One of the most effective recipes is citric acid and chlorine. It can be used on almost any yellowed surface without fear of ruining the appearance of the product. You should also work with gloves to avoid allergies or chemical burns to the skin of your hands. To clean plastic, mix both components (1 part each) and apply to dirt. Leave the mixture for half an hour, then wash it off and repeat several times if necessary.
Hydrogen peroxide
Every first aid kit should have peroxide, and it will help not only treat wounds, but also bleach plastic. You just need to soak the cotton wool in the solution and clean off the dirt. Sometimes they don’t work the first time, so you’ll have to regularly clean them with hydrogen peroxide. Yellowed elements can be filled with the product and left for several hours, because peroxide is not capable of spoiling the material.
Alcohol
Alcohol-containing products (or pure alcohol) allow you to achieve ideal cleanliness and remove any degree of contamination.
Acetone
Another aggressive substance that can help. It is advisable to use it only in extreme cases, when gentle methods have not helped. Inhaling acetone vapor or allowing it to come into contact with your skin is dangerous. You need to carefully apply the plastic bleach solution to a rag and rub the yellow stains. Instead of acetone, many people choose nail polish remover, as it does not damage materials.
