If your carpet does not have any contraindications regarding exposure to strong water pressure, then you can safely begin the process of using Karcher.
To wash a carpet with Karcher, follow this sequence of actions:
- First you need to find a suitable place for this. Cleaning will be easiest on a concrete or asphalt area. If you have one near your home, great.
- It is necessary to take into account that the place has the ability to connect the mini-wash to the electrical network. Use a regular extension cord for this.
- Sweep the area and wash it.
- Vacuum the carpet to remove debris.
- Lay out the flooring on the site, carefully straightening out all the folds.
- Wet the carpet and apply the cleaner evenly.
- Karcher, as a rule, is equipped with a special foaming agent. Thanks to this, you can easily distribute the foam in an even layer over the surface.
- After applying the foam, the floor covering should be rinsed with a stream of clean water under pressure.
- It is recommended to hold the device nozzle in such a way that the angle between the surface to be cleaned and the jet is 15-20 degrees. This way you can remove the maximum amount of dirt.
- After all the procedures done, the carpet should be thoroughly dried.
Proven detergents
The lion's share of success in cleaning coatings belongs to the correctly selected detergent composition. And the key word here is correct. Carpet detergent should be selected based on the nature of the soiling, type of washing and the product itself. After all, a carpet, especially an expensive one, can be ruined not only by improper washing, but also by using the wrong product. Let’s make a reservation: it’s better not to wash natural handmade carpets at home! Not every person can do this correctly, and not every store can find the appropriate product. There is only one way out - specialized dry cleaning. Therefore, we will talk about choosing a product only for factory-made coatings.
Let's start with the fact that each brand of household chemicals has its own carpet cleaner. We will list the most popular and working ones. So, what and how to wash the carpet?
Cinderella carpet cleaner
“Cinderella” involves diluting the solution in water (4 caps), rubbing it into the carpet, drying it, and removing it with a vacuum cleaner. “Vanish” perfectly fights difficult, old, stubborn stains, has a pleasant smell, and washes out perfectly. The product is available in three forms: shampoo (for hand washing, antibacterial, for detergent-type vacuum cleaners), spray, powder. Each product is supplied with instructions, which you should read carefully. How to wash a carpet with Vanish? The shampoo is diluted in water, the foam is rubbed into the surface, dried, and removed with a vacuum cleaner. The same technology applies to the spray, which is sprayed and rubbed in with a sponge. The powder is intended for dry cleaning. It is scattered evenly over the carpet, lightly rubbed into the pile with a brush, left alone for the prescribed time, and vacuumed. Before use, be sure to find out in the instructions which product is suitable for your carpet.
Carpet cleaner “Shine”
The rest of the products are used in a similar way, with the exception of Kärcher powder, which is used exclusively in conjunction with a special spray device: the powder is diluted and poured into the tank. However, cleaning carpets with a detergent of this particular class at home is still possible: today there are devices on sale from this company that are intended specifically for domestic use.
The trimmer turns, the trimmer turns. to the carpet cleaner
Summer is the time not only to roll up pickles and preserves for the Pogrebok supermarket, but also, of course, to wash home carpets and rugs. Year after year, my mother and sister, on their knees, cleaned away the traces of our worn-out feet. They soaked and rubbed: it’s hard work, housewives will understand. And then trouble came - my mother’s legs hurt and, most importantly, glaucoma was discovered. This means don’t lift heavy things, don’t work with your eyes down. We've arrived...
And then my brother-in-law and I decided to come to the rescue and make a carpet cleaner. We converted our trimmer into a carpet cleaner. We took a standard cutting disc with three blades. We made holes in it for three brushes, then screwed the brushes to the disk, installed the disk on the trimmer... and voila, the carpet cleaning machine is ready.
With my carpet… with a trimmer
Mom decided to wash the first carpet herself - doubts overcame the woman. The next carpet, 4x5 m, was clearly a burden to her, and she agreed to the experiment. The carpet was moistened, soaped, given a little chemical (cleaning agent) to “eat”, and the storm of carpet stains - the trimmer - entered the scene. And so it began: brushes cleaned the surface of the carpet at the speed of sound, ladies batted their eyes, neighbors began to come running to look at the miracle of technology.
The cleaning lasted about 10 minutes. It was decided to clean the palace from the heart. The result is perfect - all stains are removed, dirt is cleaned. Mom is happy, and my son-in-law and I got a part-time job - orders from lonely neighbors came like a cornucopia. That's how a converted grass trimmer became a carpet cleaner.
We only spent money on brushes. It took about two and a half hours to convert. We recommend it to everyone. Now let's work on the snow blower. For this you will need our walk-behind tractor.
Source
How to wash a carpet with Karcher? Procedure
If your carpet does not have any contraindications regarding exposure to strong water pressure, then you can safely begin the process of using Karcher.
To wash a carpet with Karcher, follow this sequence of actions:
Important! Household chemicals should be used very carefully. After such treatment, it is necessary to thoroughly wash all remaining product. Unwashed particles will attract dust particles, and as a result, very soon your carpet will become dirty again.
Important! If the surface on which the carpet is being cleaned has a slight slope, this will significantly improve cleaning. After all, all the dirt will go away on its own.
Important! Do not direct the jet at a 90 degree angle to the surface of the carpet. In this case, dirt and dust will simply penetrate deeper into the product.
Important! Remaining moisture can cause mold or moss to form inside the carpet fibers, as well as encourage the development and proliferation of harmful microbes.
Vinegar
Vinegar is no less popular in everyday life than soda. Thanks to vinegar, any carpet will return its original color, but only if you do not overdo it.
Before treating with vinegar, the product is thoroughly vacuumed, after which a weak solution (15 ml of acid per 1 liter of water) is applied to the stains. The carpet can be lightly rubbed with a soft brush in the direction of the pile, or moistened generously with a rag. After 20-30 minutes, the mat is dried with a sponge, then vacuumed again. The main thing is not to forget to ventilate the room after the procedure.
How to care for carpet
By adhering to the following recommendations, you can prevent damage to the carpet and maintain its original appearance for a long time:
If it was not possible to protect the coating from contamination, then you will have to work hard to remove not only the dirt, but also the smell. And for this you will need the best cleaning vacuum cleaners, designed specifically for washing carpets.
Vanish and other remedies
Today you can purchase many different products for cleaning carpets at home. Vanish is considered the most popular among them. But you should be careful, since the manufacturer indicates on the label that the product is suitable for various coatings, but this is not always the case. In some cases it is better not to use it.
It is worth noting that there are several types of Vanish shampoos: with antibacterial properties, functions of eliminating unpleasant odors, removing stains, and whitening (for light-colored coatings).
It is worth noting that all of the listed products can only be used on carpets made of synthetic materials, since they are less susceptible to fading and abrasion. As for natural carpets, under the influence of such chemicals they can lose their shape and color.
In addition, such products should be used to remove only fresh stains. Moreover, only foam is used for cleaning.
How to wash a carpet at home using Vanish:
How to wash a carpet with Karcher
A carpet is different from other things in that it cannot simply be washed in a washing machine. However, it gets dirty just as often. There is no way to clean the carpet directly indoors. However, thanks to the Kärcher portable car wash, this becomes possible.
However, before using such a technique, you need to remember that a vacuum cleaner washes carpets under pressure of up to 160 bar, so if you do not clean according to the rules, you can ruin even a very thick carpet.
It is worth noting that this method is not suitable for washing carpets that have an adhesive base, since the jet will knock out all the glue and the carpet will simply crumble after it dries.
Here are some more tips on how to wash a carpet with Karcher:
General rules and prohibitions
Most carpets cannot be heavily wetted; it is better to use foam.
Methods and means used when washing carpets depend on the type and material of manufacture. But there are general requirements that always apply. Following them will help you wash any carpet at home without harming the pile itself and its color.
Contaminants can only be washed with cold or warm water at a temperature not exceeding 50 °C. Hot liquid destroys the base of many coatings and causes discoloration of paints.
Pile carpets can only be washed in the direction of the grain. Reverse movements can easily pull lint out of the base.
As strange as it may sound, it is better to wash the carpet with the least amount of water. It is necessary to clean with soap suds from any product, and not with the liquid itself. This does not apply to those cases when you have to thoroughly wash the carpet to remove serious dirt using special devices.
In addition to the general rules, there are additional recommendations related to a specific type of carpet.
Washing must be completed with thorough drying. Even if you had to clean a small stain, you must then treat it with a hairdryer or expose the entire product to the sun's rays.
Cleaning carpets at a car wash
Cleaning carpets with Karcher is not always possible, because not every owner of such floor coverings has a similar device in their arsenal of household appliances. In this case, people often turn to a car wash that offers such services. Is this type of cleaning effective?
Advantages and disadvantages, as well as important nuances of going to a car wash:
Important! If the carpet is exposed to excessive moisture, its base will become deformed, the glue will become soggy, and the pile may fade. Threads under high water pressure can unwind and form heterogeneous areas on the coating. All this can lead not only to loss of appearance of the carpet, but also cause an allergic reaction in humans.
Precautionary measures
For safe cleaning you need to know a few rules:
- The socket must be located in such a place that there is no direct contact with water.
- Washing is not carried out on cold and windy days.
- "Kärcher" is not used for carpets whose fibers are secured with glue on the reverse side.
- It is forbidden to use high pressure so as not to damage the fiber structure.
- The choice of detergents must be approached responsibly
No matter how good and effective the Karcher carpet cleaning method is, it is not suitable for all types of floor coverings.
Cost of services
As you already know, carpet cleaning at a car wash is a very attractive service in terms of cost.
Depending on the region of the country, prices vary from 70-200 rubles per square meter. The increase in cost comes from the cleaning method and detergents chosen by the customer.
The more professional the equipment and the more specialized the detergent, the higher the price.
The order may include delivery of the carpet, which adds cost to the total amount.
The carpet is one of the main symbols of home comfort. A wide covering with soft high pile certainly gives the living room or bedroom a finished look and evokes peace. But comfort can very quickly turn into discomfort, and the pride of the owners into a hazardous “collection” of dirt, stains, accumulated dust and allergens if the carpet is not given sufficient regular hygienic attention. The question of how to wash a carpet arises almost immediately after purchasing it.
And the answer to it may take much longer than it seems at first glance.
There is no need to delay cleaning the carpet.
The question of how to wash a carpet arises almost immediately after purchasing it.
And walking on a dirty carpet, not to mention lying, sitting, playing on it, is at least unpleasant, at most dangerous. Therefore, as soon as the need for wet cleaning arises, owners not only wonder where to wash their carpets, but are faced with a real choice:
Dry cleaning is a good option, provided that it is professional, and its workers know how to wash a carpet correctly, have solid experience and a corresponding reputation. Otherwise, you simply risk parting with the carpet forever, having spent twice: the first time on cleaning (stupid), the second time on buying a new covering. Car washes generally should not include carpets, especially expensive, handmade ones. Very few such establishments can boast of adequate washing/drying conditions and qualified employees.
Dry cleaning is a good option, provided it is professional
If you are still thinking about how to wash carpets at home, then this is reasonable. At least at home you can completely control the process, and you will have an impressive guarantee of a good result. If you still want to keep everything under control, but trust the professionals, call a specialized team to your home. With Kärcher equipment, for example. And then your carpet will be guaranteed a crystal clear future!
Can the carpet be washed? Not only is it possible, but it is also necessary. Even very expensive, handmade from silk or wool. Only in this case, if you have chosen the option of dealing with dirt yourself, you should definitely know how not to do this. You cannot wash off dirt, regardless of its origin, with hot water. The maximum threshold in this case is 50°C. At best, you can “steam” the dirt; at worst, you can dissolve the adhesive base and be left without a carpet at all. Also, boiling water is the enemy of natural and colored coatings. They become deformed and shed. Is it possible to wash carpets with a vacuum cleaner? Of course, if you know how to do it correctly.
Do not wash off dirt, regardless of origin, with hot water
When manually cleaning, do not use brushes that are too hard, which damage the pile, and also do not act against the direction of the fibers. Every guide on how to wash a carpet states that soaking such products is strictly prohibited. Moreover, after washing, all moisture must be immediately removed with a hairdryer, and placed on the inside of the coating. Moisture, especially in a poorly ventilated area, will cause the wicker to rot, causing plaque, odor and holes.
Powders and other powdery crystalline cheap carpet cleaners are contraindicated! It is difficult to rinse them completely, they “scratch” and damage the pile. It is better to use liquid, gel-like products. Any dishwashing compound can easily handle grease. Which is especially convenient if we wash the carpet at home. Now let's talk about how to do it correctly.
Powders and other powdery crystalline cheap carpet cleaners are contraindicated
Cold water/snow
Snow removal is the most low-budget way to get rid of dirt. The rug is taken outside and spread with the pile down, after which it is carefully beaten from the inside out with a stick. Then the product is turned over and rubbed with snow on the front side. They wait until the snow has absorbed all the dirt, sweep it away and drag the carpet to a clean place to start all over again. The process is repeated again and again until the fibers are clean.
Ice water saves from blood stains and traces of domestic animals. Simply dip the brush in water and then rub the mat with it. The brush should not be too hard and the stain should not be too old!
Long pile
How to clean a long pile carpet? It will hardly be possible to do this with a regular vacuum cleaner, and using a hard brush can easily ruin the product.
Long pile requires the most labor-intensive work. Soap foam will help to deal with dirt, which should be carefully applied with a rag and then left for a while. Next, problem areas are treated with a steam cleaner or more powerful professional equipment.
Cleaning light and dark carpets
Dark carpet should not be cleaned with light powders - soda, flour, potato starch. Such products are more suitable for light-colored pile, but unpleasant white stains may remain on a dark product. In addition, the structure of the product risks becoming more rigid and unpleasant for the feet. For such a rug, stain remover recipes based on ammonia, vinegar, and turpentine are better suited.
How to clean a white carpet ? White hair will not tolerate lemon juice, which leaves yellow stains. Other specific remedies, such as sauerkraut, will not work either. You should make sure that the folk recipe chosen by the housewife will not give the product greasy marks, which are more difficult to get rid of than dirt. But white powders (soda, salt, starch) and solutions based on laundry soap will help.
Make one like this for yourself!!!
Washing vacuum cleaners: for thorough cleaning
Kärcher washing vacuum cleaners provide thorough cleaning of carpets and upholstered furniture. A cleaning agent solution under pressure is sprayed onto the surface of the pile, moisturizes it to its full depth and is immediately absorbed along with the separated dirt. This ensures effective removal of dirt and odors.
Operating principle of a washing vacuum cleaner
When cleaning with a washing vacuum cleaner, a single working process involves spraying an aqueous solution of a cleaning agent and immediately collecting it along with the separated dirt.
Hygienic cleanliness
The Kärcher washing vacuum cleaner is necessary not only for allergy sufferers, but also for pet owners.
Causes of dirt on carpets
Traces from street shoes are one of the common causes of dirt on the carpet.
The main source of dirt is dust that constantly falls on the carpet. Conventional means are unable to completely remove the pile, and it accumulates in the structure of the carpet fibers. Even a powerful vacuum cleaner will not remove all the dust.
Another source is street and indoor dirt from the soles of shoes and animal paws. Small children are not able to immediately understand the rules for maintaining cleanliness in the apartment and may walk on the carpet in street shoes.
The smallest part of the pollution is wine, tea spilled on the carpet, or pieces of fatty food that have fallen from a plate. This category also includes traces of children's activities - plasticine, felt-tip pen, sand from toys.
Urine from a baby, domestic cat, or puppy may come into contact with the rug. In such cases, you will need to wash the carpets with odor-eliminating products.
Recommendations for cleaning carpets
Carpet is a practical and aesthetic type of floor covering. It provides additional thermal insulation, protects the feet from the cold and gives a pleasant tactile sensation. In addition, such a coating can become a bright interior element and emphasize the sophistication of the decor. However, it requires careful and regular care. That is why it is important to know how to clean a carpet from various contaminants and what can be used for this. Let's look at the benefits of cleaning with a vacuum cleaner and using hand tools and household cleaning products.
Why do you need to clean your carpet?
Regular treatment (maintenance, periodic or as part of general cleaning) maintains the attractive appearance of the coating, increases its service life and ensures hygiene. Since dirt accumulates not only on the surface, but also deep in the pile, it is not always possible to determine the need for cleaning by the appearance of the carpet. Therefore, it is very important to regularly remove dirt and properly remove stains that form.
Suffice it to remember that:
How often should you clean your carpet?
The frequency of carpet cleaning depends on many factors, primarily on the place where it is laid. Coverings in kitchens and children's rooms require careful care. The frequency increases if children live in the house, people suffering from allergies, or if there is a four-legged pet. In this case, thorough cleaning 1-2 times a month cannot be avoided. General recommendations for the frequency of cleaning carpets at home:
Caring for different types of coatings
Material . When deciding how to clean dirt from your carpet, it is important to first determine what kind of care your carpet needs. Thus, synthetics are an unpretentious material in terms of cleaning. It can be cleaned with ready-made and homemade products. Natural silk coverings should not be subjected to wet cleaning. They should be vacuumed, shaken out or knocked out. Fur (including sheepskin) and wool-containing products withstand moisture well.
Pile length . This is another important criterion. The long pile perfectly hides dirt and dust, as well as animal hair. Therefore, even a visually clean surface should be carefully looked after. Long pile is not recommended to be treated with hard brushes. They can damage the base. The best option for care is foam formulations. Powders will only clog between the fibers and will not have the desired effect. Short pile carpet is much easier to clean. It is suitable for both dry and wet cleaning.
Color . The color of the carpet may influence the choice of product. For example, under the influence of bleaching acid compounds, white pile may acquire a yellowish tint. Also, after processing, the bright colors of the coating may fade. Given this, before use it is recommended to apply the product to a small area and test its effect.
General cleaning recommendations
There are several simple rules on how to clean a dirty carpet at home.
Removing stains and odors from carpet with home remedies
Carpeted floors often suffer from rough handling and develop a variety of stains over time. If this happens, you shouldn’t immediately rush to the dry cleaner or grab a stain remover. Many problems can be effectively treated with simple home remedies.
Effective carpet cleaning with a vacuum cleaner
Brushes and homemade cleaning products are the simplest solution, but not always convenient. To thoroughly and quickly tidy up carpeted floors at home, washing vacuum cleaners are used. In addition, the use of this technique is one of the most effective ways to remove stubborn stains. We recommend the Karcher washing vacuum cleaner in combination with liquid (RM 519) and powder cleaning agents (CarpetPro RM 760 CLASSIC and RM 760). This combination allows you to achieve better results in a short time and without effort.
The procedure for cleaning a carpet with a washing vacuum cleaner:
Advantages of purchasing Karcher vacuum cleaners
Karcher is one of the leading companies in the world in the development and manufacture of high-quality and reliable cleaning equipment. The advantages of the brand’s washing vacuum cleaners include:
When deciding how and with what to clean the carpet on the floor, you should prefer a modern washing vacuum cleaner and a high-quality product. This will allow you to clean regularly without any problems. If necessary, specialists from official representative offices in Russia will recommend a suitable model and detergent.
Source
How to clean a carpet with a trimmer?
Housewives are well aware that until recently, cleaning carpets was a difficult and thankless job. After all, this process took and still takes a lot of time, during which you have to scrub off all the stains manually using a regular brush, water and some detergent. This requires a lot of physical effort. Therefore, it can be very disappointing when stains appear again on the clean surface of the carpet, which may be the result of one’s own carelessness, the mischief of a playful child, or the consequences of the unintentional actions of some pet.
Fortunately, modern technologies have come to this household area. Therefore, today you can clean the carpet using a washing vacuum cleaner, which greatly simplifies this hard work. The problem is that buying such a “miracle of technology” just to clean the carpet once or twice a year is quite expensive. Therefore, domestic “Kulibins” thought and proposed replacing the washing vacuum cleaner with a conventional trimmer, which is several times cheaper and can be used for its intended purpose during long breaks between major cleanings.
Did you like this idea? Then you will first have to work a little to assemble the special attachment yourself. We go to any hardware store and buy three very ordinary rectangular brushes for clothes (preferably without handles). We go to the tool department, where we purchase: a three-bladed brush cutter disc for a trimmer, six flat-head bolts with a slot for a screwdriver, as well as a tap for cutting threads or six nuts. In addition, you will need a drill, a drill bit and a measuring tool.
This interesting homemade product is assembled according to the following scheme:
This is how you can easily and simply assemble a special attachment for a trimmer, with which you can wipe off all the stains from the carpet in just a couple of “passes”.
Source
How to wash a carpet with Karcher at home
Carpets in the house make the interior more comfortable. Such products perfectly absorb noise and make life much easier for neighbors. Covered floors retain heat and provide warmth during the cold season. On a mottled surface, dirt is less noticeable. Crumbs are not as visible on it as on laminate or linoleum. However, cleaning a carpet is not an easy task. The dimensions do not allow you to put the product in the washing machine and wash it quickly. Doing this manually is tedious; taking rugs and runners to the dry cleaner is problematic. Calling a specialist home is expensive. With the advent of compact washing equipment on sale, the situation with cleaning the house has changed. You can wash your carpet with Karcher at home. Thus, the process of washing the described products will be significantly simplified.
If the carpet stinks
Everyone has the question “what to do?” if the carpet suddenly has an unpleasant odor after washing. But first, it’s worth figuring out why the palace “stank.”
Musty odors occur if the carpet has been dried in an unventilated or damp area.
Carpets made from natural materials are most likely to develop an unpleasant odor if they are not dried properly.
But it is better to prevent the smell than to deal with it later.
After washing, the carpet must be completely dried, otherwise the smell will not be long in coming. If there is high humidity in the room where the carpet is used, you need to ventilate it as often as possible.
By the way, some dry cleaners provide services for treating carpets against fungus and bacteria.
Long pile
With such things things are more complicated, and many housewives will notice this immediately - a regular vacuum cleaner cannot cope with such a carpet and you shouldn’t even try, otherwise you can ruin the pile. Here other means are used, for example, soap suds and a steam cleaner.
Limitations for washing with mini-washes
A beginner who begins to master professional equipment often makes mistakes. They often lead to damage to the carpet. Familiarization with the operating principle of washing equipment will help you avoid troubles.
Karcher is a unit that injects high pressure into water supply hoses. Through special nozzles attached to the end of the hoses, a strong stream of water bursts out, capable of breaking up any old dirt. Its pressure can be so strong that the jet can destroy the weave of the carpet. Woolen items cannot be cleaned this way.
The use of mini-washes is contraindicated if the carpet or paths have an adhesive base. Such products will simply fall apart after washing under high water pressure. Karcher is ideal only for washing synthetic surfaces. Expensive natural carpets should still be taken to specialized dry cleaners for washing.
There are also some restrictions when using the equipment.
Anyone who purchases mini-equipment for personal use should learn simple rules.
General rules of use
The general rules of use should definitely be reminded to those who are thinking about how to remove grass with a trimmer and do not yet know how to use it. These are the basics that will help you start cleaning your area efficiently.
Among summer residents, there is an increasing tendency to use trimmers, because, unlike lawn mowers, they allow you to remove grass in hard-to-reach places, and professional models can even help process tree branches. Another advantage of the trimmer is the ability to work at heights and cut branches, which can also greatly help in cleaning your territory.
Keep the grass away from foreign objects. Before work, make sure that the grass is free of stones, ropes, steel and other hard materials. If hit, the cutting element may be damaged and will need to be repaired or replaced.
Another important point is safety. Since brush cutters have a high rotation speed (they reach several thousand revolutions per minute), even a small stone can fly out at high speed and cause harm to a working person.
READ How to Put Line on a Hitachi Trimmer
Check and inspect all parts of the trimmer before starting work. Make sure the trimmer is working. Since they come in electric and gasoline versions, you will need to organize their operation depending on the type of equipment. The electric one should be plugged into the power supply and charged if it is not charged, and the gasoline one should be refilled if required.
When you first start it, let the trimmer “break in”. If you bought a new device, then you need to let it run for several minutes without load so that the motor, knives, fishing lines, and rotational elements start up. This can be called a kind of warm-up for the equipment, and it can also help prevent some troubles before actual work, because the assembly and quality of garden equipment varies.
The trimmer motor needs to be run in in advance. Running in a gasoline engine goes like this: turn on the trimmer at idle, but first at a low number of revolutions, and then increase their number.
Running in an electric trimmer includes several stages.
- To begin with, start and operate the trimmer for a short time, literally 5 minutes.
- Then you can increase the operating time to 10 minutes, but you must monitor the motor so that it does not overheat.
- After several trials of the electric trimmer, you will be able to use it on an ongoing basis. Don't forget about the engine cooling system, which is available as an additional feature on some models.
If you don’t know what type of mowing is best to start with, then it’s better to try mowing a low lawn with a fishing line. This will allow the engine to start up smoothly. There is no need to immediately load it with a large amount of work.
Before you start using the equipment, it would be advisable for you to read the instructions from the manufacturer itself and become familiar with the general functions and structure of the trimmer. The functions must be located on the control handle. Understanding the parts and components is useful in the sense that you will know how you can and should handle it. Select the load for the motor, the work for the cutting elements - all this will be useful to you during operation.
Please note the following points.
- First of all, it's technology. It has glitches and breakdowns. Before work, carefully check all the components of your equipment, because mowing the lawn with such tools is an important matter. You need to check filters (clean if necessary), fuel level, cutting elements (it’s better to take the knives to a mechanic if they malfunction), motor and other parts. This can be done after work, but some manufacturers recommend before it.
- Some trimmers have a motor cooling and vibration damping system, but they are not present everywhere. Therefore, monitor the heating of the motor during operation, because its overheating can lead to problems. Sometimes pay your attention to bolts and other elements. Although the extinguishing system may work, on some representatives of garden assistants the clip points still gradually unwind, which will eventually lead to breakdown.
- Sometimes it happens that the speed drops. In this case, first check all the filters and then try to work. It is much better to check the technique before the actual action.
- If parts break, it is better to contact a technical center. Do not try to repair the equipment yourself, as this may only speed up the breakdown. Mechanics have a complete understanding of this technology, it is better to trust them.
For information on how to use the trimmer , see below.
Coffee and wine
If you have ever spilled coffee or wine on the floor covering, then glycerin will work well with such a stain. They need to lubricate the problem area and wash off with soap and water after 2 hours.
Blood and urine
If the carpet is stained with blood or urine, a soap solution will help. Moisten a napkin with it, place it on the contaminated area, then rinse the solution under running water.
If your rug is woven from a synthetic material, stains on it can be treated with regular alcohol. To do this, wet the sponge and rub the stain, then rinse with water.
Car wash
Did you know that you can wash your carpet at a car wash? But you should know that this option is not safe, because it will be cleaned using the same products that are used to wash cars, and they do not provide a gentle regime for soft tissues.
Moreover, the rug can get even more dirty during transportation. However, if the carpet is dark, not natural, and if in case of failure it can be thrown away, then it’s worth the risk.
Instructions for cleaning Karcher equipment
Before washing the carpet with Karcher, you need to do some preparatory work. It is important to find a washing area at the initial stage. A flat asphalt surface is best suited for the designated purposes. Ideally, it should be swept and dusted. The easiest way to do this is with the same Karcher.
If you find a site with a slight slope, the water will flow to the side by gravity during washing. This will make the process of rinsing the carpet much easier. There must be a source of electricity and running water nearby. Without them, the mini-wash will not work.
The carpet itself also needs to be prepared for washing:
The main goal of preliminary preparation is to eliminate the maximum amount of dust. The next stage is the selection of a suitable detergent composition.
Carpet products
Products intended for washing cars are not suitable for cleaning carpets and paths. There are household chemicals on sale that contain surfactants (surfactants). When they are dissolved in water and then applied to fleecy material, the level of surface tension in heavily soiled areas is reduced. Dirt quickly binds and is then easily removed.
The most famous product is “Carpet Vanish”. In addition to surfactants, its formula contains oxygen-containing bleach. The manufacturer has thought out the composition of the product in such a way that its use does not cause a strong odor. If you follow the recommended dosage, there is an aroma in the room after cleaning, but it is very light and pleasant.
Mild carpet shampoo is not suitable for pressure washing. The product is designed to remove surface dust and persistent odors (such as cat urine, for example). It is applied diluted directly to the pile, left for 20 minutes, and then removed with a vacuum cleaner. This cleaning ensures the removal of fresh dirt, refreshes the appearance of the product, and returns the original color.
There are no special chemicals for cleaning carpets with a high-pressure washer. Usually simple washing powder is used. It is first dissolved in water, then the soap solution is poured into the container of the mini-equipment. A foam concentrate nozzle is placed on the hose. Karcher is ready to wash carpets or paths.
Washing
The equipment is connected to electricity, the resulting foam is applied to the carpet in an even layer. Where there are old stains, you need to hold the nozzle longer. In this case, it is better to hold the hose in such a way that the foam stream hits the product at an angle of 20 degrees.
It is impossible to direct the nozzle perpendicular to the surface being treated: the foam will drive dust into the base of the weave, then it will not be possible to remove it from there. In addition, a direct hit from the jet can disrupt the correct distribution of the pile. Creases form, which after drying will not look very nice.
When the foam covers the entire surface of the carpet, the equipment is turned off: the soap solution should lie for about ten minutes. Then the rinsing procedure begins. To do this, the powder solution is removed from the Karcher container. The device is connected to the water supply. Using a hose, the foam is thoroughly washed out of the pile (the hose must again be held at an angle of 20 degrees).
Chemicals should be washed out thoroughly. If particles of foam and dust remain in the pile, after drying they will again attract dirt to themselves, the carpet will become dirty faster than usual. If you don't rinse your carpet well, it will feel hard to the touch after it dries.
Drying
When all the remaining powder has been thoroughly pushed out of the pile by strong pressure, you need to turn off the equipment and allow the water to drain from the surface of the carpet on its own. This usually takes a couple of hours. During this time, the bulk of the water will go away. If the area where the washing was done does not have a natural slope, you should place a large board under the center of the fabric and raise the middle.
Folk remedies
After the carpet is completely dry, its appearance may not change for the better. A solution of ammonia (two tablespoons per liter of cold liquid) or salt and citric acid (two teaspoons of juice and one tablespoon of sodium chloride dissolve in two liters of water) will help correct the situation.
Solutions are applied to the carpet surface using a brush. Excess moisture is removed with dry wipes. Since ammonia has a persistent odor, it is better to carry out the restoration procedure outside.
How to clean carpet from various stains
Let's look at how to remove various dirt and stains from a carpet.
How to clean blood from carpet
Blood, both dried and fresh, can be easily washed off with ordinary cold water. But only cold. If you have already washed the fresh blood with hot water, then removing it will become a big problem.
If the stain does not disappear, try repeating the procedure, scrubbing the stain well with cold water and a brush/sponge.
If necessary, you can use vinegar, ammonia, soap solution, soda, stirring them in the proportions indicated above (→ in folk methods) but only in cold water!
How to clean pet urine from carpet
Let's try to clean the carpet from pet urine stains and get rid of the smell. If the stain is fresh, blot it immediately with a dry cloth or napkin. Next you need:
- Rinse the stain with a solution of vinegar and water in a ratio of 1/3.
- Cover the stain with baking soda or a solution of baking soda and water.
- Leave until the carpet is dry.
- Vacuum the carpet.
Next, if the smell still remains, we will resort to the following method:
- Dilute hydrogen peroxide in water in a ratio of 1/2.
- Apply the solution to the stain and wait until foam appears.
- Let the solution sit for a couple of hours.
After cleaning, wipe the carpet with a damp cloth and dry.
Cleaning carpet from chewing gum
You can get rid of chewing gum on your carpet by simply freezing it.
- Take a few ice cubes and put them in a sealed bag.
- Place ice in a bag on the gum and wait until the gum freezes to a hard and brittle state.
- Remove hardened gum mechanically, using a small spatula or a blunt knife.
- Freeze the remaining gum again and repeat the procedure.
- Wash the carpet with soapy water, dry and vacuum.
Removing chewing gum from the carpet
Prevention of contamination of carpets and rugs
If you take timely care of the condition of the carpet, vacuum its surface daily, remove stains immediately and prevent them from penetrating deep into the base, you can delay cleaning with mini-equipment indefinitely. Proper care will help prevent wear and tear on the carpet and tracks:
In winter, it is useful to beat out carpets using snow (the cold destroys germs), place rubber pads under the legs of heavy furniture, and periodically change the position of the carpet - this will avoid the appearance of abrasions in high-traffic areas. Experts advise carrying out deep intermediate cleaning once a year. The BRS 43/500 C model is most suitable for these purposes.
The price of Karcher for high-pressure carpet washing starts from 35,000 rubles. You can use the sink not only when cleaning carpets. It is suitable for washing cars, garden paths, building facades.
Source
Mowing rules
In order to mow the lawn efficiently and quickly, you need to follow the technique and know some features that will save your time and effort. You can work faster, now we’ll tell you how.
Divide your site into zones. This will help you understand how much work you will need to do. Also, you will not have any misconceptions about whether you have already worked here and whether you are going through it a second time. For the first time in a season, the lawn is mowed at a level of 4-5 cm, gradually reducing to 3-4. Set your own mowing standards. You can leave more or less. It all depends on you.
The disadvantage of electric trimmers is that if you mow vegetation during dew, water can get into the motor of your equipment.
If the motor is located at the bottom, then the likelihood of moisture getting in will be even higher. It is also not recommended to use a trimmer during rain for the same reasons. Water getting inside can cause a short circuit, which in the future can develop into a malfunction of the unit. Therefore, it is better to wait for more favorable weather for work.
It is recommended to work clockwise. It is this direction that will leave the grass you cut on the outside of the entire mowed area. During operation, hold the coil no lower than 5 centimeters. This is a safe mowing option that is well suited for those who have recently started using such equipment. When it comes to working near a fence or other areas where only a small portion needs to be mowed, use the edge of the line. This will help ensure that the engine does not overload and wear out.
How to dry properly after washing
After washing, wait 10–15 minutes for the water to drain down. This is true when the product lies on an inclined platform or on a pallet. For further drying, we recommend hanging the product in a vertical position. The remaining water should completely drain down. Typically it takes from 3-4 hours to 2 days to dry.
Drying the carpet
Facts : Textiles need high-quality drying. Mold can form inside wet fibers.
Dry the product on both sides. To do this, turn it over to the wrong side. Do not leave the item in direct sunlight. Colors may fade if exposed to the sun.
Operation is not recommended until completely dry. We do not recommend stepping on the carpet until it is completely dry. This can lead to creases and lint jams.
Video with tips for washing carpet with Karcher:
Larisa, November 26, 2022.
Subscribe to the channel Modern Housekeeping in Yandex.Zen
Save and share information on social networks:
Source
Even a small rug in a room needs periodic washing. One of the simplest and most effective ways to wash a carpet is to use a Karcher. In order for the procedure to be successful and the dirt to be washed away, you need to know what to wash with and what places exist for this.
Preparing the carpet for washing
The first thing you need to do before washing is to check how the product behaves when interacting with the carpet.
To do this, you can apply the product to the pile in an inconspicuous place and leave for half an hour. If during this time nothing bad has happened to the carpet, the product can be safely applied to the entire surface, but a little later.
First, the floor covering must be thoroughly vacuumed to rid it of dust and debris.
Then we select a brush with which we will wash the carpet. It should be soft and have long bristles in order to wash the carpet pile as thoroughly as possible. The next step will be removing stains, and as you know, there are different stains.
Sources:
https://krutopol.com/kak-ochistit-i-pomyt-kover-v-domashnix-usloviyax.html https://ladyplace.ru/home/byt/kak-pochistit-kover.html https://stroy- podskazka.ru/trimmery/kak-kosit/ https://postirajka.ru/stirka/stirka-belya/vse-metody-chistiki-i-stirki-kovrov/
What is Karcher?
To thoroughly clean the carpet, wet cleaning is necessary. Brushes and manual cleaning cannot effectively clean the carpet, and there is a danger of a musty smell or, even worse, mold, as a result of using carpet that is not fully dried.
Therefore, when deciding on wet cleaning, you should give preference to a modern washing vacuum cleaner and a high-quality cleaning agent.
Karcher is a machine designed for general carpet cleaning. Using a foaming agent, the device sprays a chemical over the entire carpet surface under high pressure.
Then, when using a vacuum cleaner without an extraction function, the foam is washed out of the carpet with a strong pressure of water, which is supplied under high pressure of 110-150 bar.
When using an extractor, the sprayed product is sucked in along with dust and dirt.
This device is simply indispensable for pet owners and allergy sufferers.
You can also use innovative vacuum cleaners with water filtration function. Therefore, complete cleaning is done through the natural power of water.
The key feature of this tool is that at the end of the cleaning procedures it does not take much time for the coating to dry completely.
