How to clean frosted glass without streaks at home: 20 best products

Frosted glass looks elegant, original and beautiful; it is most often used to decorate furniture, interior doors, and shower cabins. But this decorative element pleases the eye only if it is kept in perfect order. How to clean frosted glass efficiently, without harming it and restoring its attractive appearance?

Main causes of pollution

Before you start cleaning up contaminants, you need to familiarize yourself with the main reasons for their occurrence.

Dust

Most often, dirt on the glass door surface appears due to high dust levels in the room. If you do not clean your apartment for a long time, dust particles will begin to settle on the glass and gradually accumulate. Therefore, it is recommended to regularly do wet cleaning to keep the room dust-free. Each room must be cleaned at least once a week.

Handprints

Some people touch the door glass with dirty hands, and because of this, hand marks remain on it. Regular glass coatings are easy to clean from such prints, but matte surfaces are much more difficult to wipe off. Difficulties arise due to the following reasons:

unevenness and roughness that complicate the cleaning process;
matte coating that absorbs dirty stains.

Dried splashes and drips of water

Doors with opaque glass inserts are often installed in bathrooms. After using the doors for a long time, dried splashes or even water stains appear on them. Such stains are considered the most harmless, since they are the easiest to wipe off. To do this, just wipe them with a cloth soaked in soapy water.

Stains from grease, soot and food

Such stains appear on structures that are installed in the kitchen. The main feature of these contaminants is that they are absorbed into the surface of the doors and into the frosted coating of the glass. Therefore, it is very difficult to clean products from traces of soot or grease. You will have to use special detergents that contain substances to combat greasy stains.

Street dirt

Residents of private houses often encounter street dirt on their door coverings. Most often it appears on products that are installed in the loggia or veranda. It is easy to get rid of ordinary dirt, as it can be easily washed off with water.

How to remove grease stains from frosted rough glass

You can clean a rough glass surface using the following products: PROFOAM 3000, AJAX, PRIL or Mister Muscle. But how can you clean frosted glass from greasy stains if you don’t have these products? You should use chalk diluted in water, a bite, ammonia/ethyl alcohol, and after treatment, rub the contaminated area with newspaper, eliminating not only the remnants of the product used, but also grease stains.

Frosted glass surfaces are very popular nowadays, but they require special care, since dirty doors and glass are unlikely to please the eye. However, it is important to approach cleaning frosted glass correctly in order to restore it to its former attractiveness and not harm it.

What is the difference between frosted glass and regular glass?

Frosted glass differs from regular glass in manufacturing technology and appearance. It is done as follows:

a special decorative film is glued onto ordinary glass;
coated with a coating that saturates the shade and gives it a matte finish.

Because of this, the surface of the glass becomes rough, which makes it difficult to clean and increases the intensity of contamination. That is why it is important to know how to properly clean frosted glass with or without a pattern from greasy stains so as not to damage the surface.

Folk recipes

There are several folk remedies that will help clean the matte surface on glass.

Ammonia

The most popular cleaning agent for coated glass is ammonia. It is used to prepare a detergent that effectively fights almost any stain. To prepare the solution, add 10 milliliters of ammonia to a liter of water. The mixture is sprayed with a spray bottle and rubbed with a cloth. After this, the wiped coating is washed with cold water.

Vinegar 9%

Experts advise using vinegar liquid to clean glass. It will help get rid of ordinary dust and wipe away stubborn greasy stains. To prepare the solution, add a tablespoon of apple cider vinegar to a glass of water. Then soak a rag in the solution and wipe the door with it. To prevent the coating from smelling like vinegar, it is washed again with soapy water.

Baking and soda ash

Sometimes vinegar and ammonia do not help clean the surface of the glass from dirt and you have to use soda ash and baking soda. It is added to water in a ratio of one to five, after which the matte product is treated with the soda mixture. You can also not dissolve the soda, but simply rub it into the surface, rinse with water and wipe with a dry towel.

Powdered chalk or starch

If there is a lot of dirt on the glass surface, you can use starch or chalk powder from which a cleaning solution is prepared. To do this, add 45 grams of the substance to 500 milliliters of water, after which the liquid is thoroughly mixed. Then soak a cloth in a container with the mixture and wipe the glass with it. Remains of chalk are wiped off with a regular dry sponge or rag.

Denatured alcohol, vodka and cologne

An effective means for cleaning dirt can be prepared from cologne, regular vodka and denatured alcohol. All components are mixed in equal quantities. Then the liquid is evenly applied to the dirty surface and left for 10-15 minutes to soak in the dirt. After this, use a rag soaked in water to wipe off the remaining dirty marks.

Steam

Sometimes people don't want to use cleaning fluids, so they steam the frosted glass instead. For this, a special steam generator is used, which not only removes dirt, but also degreases the door. Steaming should last for five minutes. Then wipe the cleaned surface with a dry cloth to remove any remaining moisture.

Chalk mixture and bleach solution

When cleaning matte surfaces, it is recommended to use a solution made from bleach. It is able to clean it of dirt and absorbed fat. To create the mixture, add 20 grams of lime and 25 grams of grated chalk to 800 milliliters of water.

The glass is sprayed with the prepared solution. After 15-20 minutes, wipe it dry with a towel or napkins.

Potassium permangantsovka

To combat old stains, you can use a manganese solution. When preparing such an effective manganese mixture, 55 grams of manganese are added to a liter of boiled water. The solution is stirred until it turns a dark reddish color. Moisten a sponge in the prepared liquid and wipe the surface of the door glass with it.

Removing greasy stains

Sandblasted glass quickly becomes dirty due to its roughness. This surface is tricky to clean. It clearly shows greasy fingerprints, which cannot be removed without special solutions.

How to clean frosted glass:

Dissolve 1 tbsp in 1 liter of water. l. ammonia. Take a rag, soak it in the mixture, and wipe off any oily stains. The remedy works, but slowly. Rub harder. Wipe the doors with a dry cloth.
Use 1 tbsp as a detergent. l. vinegar, 0.5 tbsp. l. salt and 0.5 liters of water. Stir the solution until the salt crystals dissolve. Strain. Treat the frosted glass on the door with the mixture and dry with a napkin.
Laundry soap cleans perfectly. Grind, dissolve in warm water, whip up foam. Apply to dirty glass, rub with microfiber, rinse with water.
Starch will save you from glue and fresh grease stains. How to wash frosted glass: dissolve 1 tbsp in a liter of water. l. starch. Treat the glass surface with the product. Wipe dry.
Cleaning with potassium permanganate will help with coffee and greasy marks on expensive glass. Make a saturated solution. Using a sponge, treat the frosted glass on the door, rinse with running water, and dry.
Baking soda is an abrasive and cannot be cleaned with dry powder. You can make a paste. Mix baking soda with water until you get a creamy consistency. Apply the paste to dirty surfaces. Wait 10–15 minutes. Rinse the treated area with water, then the entire door.
Acetone or alcohol works great on tea and coffee stains. This technology is also suitable for cleaning frosted glass from office glue and coloring liquids. You will need 2 Freken Bock napkins. Soak one napkin in alcohol and clean contaminated areas. The second is to wipe dry. Clean the glass on the door carefully, without touching the seals and silicone gaskets.

Before washing the frosted glass, wipe the surface from dust. Small grains leave scratches.

Industrial detergents

If folk remedies do not help get rid of dirt, you can use industrial cleaning compounds.

Laundry soap

Laundry soap, which is found in almost every home, will help clean a door with frosted glass. To prepare a soap solution, grate a bar of soap, add it to a bowl and fill it with water. The mixture is then stirred until the soap is completely dissolved. Apply the solution to the dirty surface with a rag in a circular motion. If solutions remain on the glass, wash it again and wipe it with dry cloths.

Dishwashing liquid

There are special products that are used for washing dirty dishes. They are also suitable for cleaning glass with a matte finish. They are applied to the door and rubbed with a sponge. After 5-10 minutes, the remaining cleaning solution is washed off with water.

Glass products

If the above cleaning methods do not help get rid of dirt, you will have to use glass cleaners.

"Mister Muscle"

This is a popular detergent used to clean dirty glass. It is easy to use “Mr. Muscle”; to do this, it is sprayed onto the product and rubbed in with a sponge. Then the treated surface is washed again with water and dried so that no traces of stains remain.

Clin

Most often, this cleaning composition is used to clean household appliances and kitchen furniture from stubborn grease stains. However, experts advise using Clin for cleaning door glass. The detergent composition is sprayed onto the matte surface and after fifteen minutes is wiped off with a dry or moistened cloth.

Help

To clean doors, they often use Help detergent, which contains components that effectively fight even old grease stains. This liquid is stirred in warm water, after which the glass is washed with the mixture. Apply the product using a sponge.

Fratty Cleaner

To clean the surface of porcelain, crystal, silver, mirrors and regular glass, you can use Fratty Cleaner. The advantages of such a detergent include the fact that it not only removes dirt, but also gives the treated coating an antistatic effect.

This solution does not leave any traces after use and therefore there is no need to wipe the glass again after use.

IKeep

This is an effective detergent composition, the production of which does not use toxic substances. The product has disinfection properties and therefore, during cleaning, all microbes are removed from the treated glass. During use, IKeep is applied evenly to the door. The liquid is rubbed with a sponge or napkins.

Ecover

This is an effective product that comes in the form of a liquid cream. Ecover is able to clean dirty surfaces from limescale, rust stains, greasy marks and dust. It is most often used when cleaning sinks or bathtubs. However, some housewives use it to treat dirty glass. The cream is applied to the surface and left on it for half an hour. Then the remaining liquid is washed off with water.

Ajax Super Effect

This composition is used if traces of grease are visible on the surface of the glass. When using Ajax Super Effect, apply the product to the contaminated area. After this, a dry rag is moistened with water to wash away any remaining detergent.

"Second" for window glass

To clean a tile, glass table, mirror or crystal, you can use “Second”. This cleaner is popular among housewives as it leaves no residue after use. It removes fingerprints, dirt and grease from surfaces.

Cif

This is a universal product that is suitable for cleaning any surfaces. The liquid is sold in a container with a sprayer through which it must be sprayed. Cif is first applied to the surface and then wiped off with a paper towel.

Pril

This product is produced for washing dishes, but it contains components that can clean frosted glass from dirt. Pril is applied evenly to the dirty area with a sponge, after which the solution is removed with a dry cloth. The procedure is repeated 2-3 times until the surface is completely clean.

General cleaning of frosted glass

Before washing frosted glass from grease stains and other contaminants, moisten the glass with water and leave for two to three minutes;
Spray the selected cleaning agent onto the surface and wipe with a soft cloth using light circular motions;
Do not press too hard on the product and process the glass on both sides;
After the procedure, rinse the solution from the surface with a damp, clean cloth, and then wipe the glass dry. This will avoid soap stains;
When washing, use only cold water!

What not to clean at home

There are several products that are contraindicated to use when cleaning glass coverings.

Strong abrasive compounds and materials

Sometimes hard abrasive materials are used to clean products from dried dirt. You should not use them when cleaning glass, as their thick coating can damage the glass surface and leave scratches on it.

Products that contain silicone, any acids or alkalis

There are times when people try to clean door glass with products that contain silicone, alkalis and acids. However, such liquids cannot be used, since the components from their composition can corrode the matte finish.

Hard scrapers and spatulas

Spatulas and scrapers can be used to clean products with durable metal or concrete surfaces. It is prohibited to clean glass with such tools, as mechanical impact will damage the matte coating.

Strong solvents and detergents

Strong detergents containing solvents should not be used. They contain substances that will damage the surface of the glass.

Care tips and warnings

The matte surface must be brought into proper shape with great care so as not to spoil its texture. In this case, several rules should be followed:

Wash and clean any dirt only with soft material. A spatula, metal sponge or scraper will leave scratches.
Use strictly permitted substances for washing in permissible concentrations. Gasoline, acetone (and solvents based on it), as well as compounds containing chlorine, will at best make the glass transparent.
Choose liquid cleaners. Powder crystals will damage the spray.
Do not leave the glass wet after cleaning. There will be streaks on it.

Thus, the matte surface will remain in good condition for a long time only with careful handling and proper care.

Store formulations

"Mister Muscle"

Just the name of a detergent often brings a smile, so tired of annoying advertising. But if you look through thematic forums and analyze the reviews of housewives, then most people prefer this cleaning product. This is one of the best options for removing dirt from frosted glass.

But "Mr. Muscle" is effective if the panel is only slightly dirty. It is powerless against a layer of dirt and oil stains. And the expense of funds turns out to be large; Taking into account the cost, use in such cases is hardly advisable.

"PRIL", "Ajax"

These products are great for cleaning glass stained with grease. It is enough to moisten the base with water, “walk” several times with a soft cloth (napkin), and it will quickly acquire its original appearance.

Detergents

There are enough “chemicals” to clean dishes: sprays, gels. They can be used to remove dirt from glass. Effective for combating adhering dust, drips and stains. These compounds will also easily rid the surface of “greasy” fingerprints.

Alcohol-containing products

They are considered one of the best for cleaning frosted glass. Literally everything is removed - drops of fat, traces of coffee (juice, tea), glue, mastic, putty and so on. But drugs in this group should be used with caution.

Paneled doors from different manufacturers differ in the way the inserts are attached and the materials used to seal the gaps. Alcohol corrodes silicone seals (gaskets), and if they are the ones that are installed, you should choose a different detergent.
It is important what exactly is diluted in alcohol. Some preparations leave streaks and stains on the base after drying. And while this is not critical for most surfaces, it matters for frosted glass. Before use, you should drop the product somewhere in the corner of the panel and see what remains on it after the alcohol evaporates. If the test result is positive, you can safely wash it.