8 products that make it easy to bring a glossy kitchen to shine and without streaks

Glossy kitchens are stylish and beautiful, but not entirely practical. During use, scratches will certainly appear on the shiny surface of the cabinets.
Somewhere the knife will come off unsuccessfully, or too much effort will be applied when trying to remove drops of fat. As a result, cabinet facades lose their former attractiveness and shine.

Read the article on how to safely remove scratches from a glossy kitchen surface.

Mistakes in cleaning glossy furniture

1. Do wet cleaning

Water negatively affects the gloss. When moisture gets under PVC-coated MDF or chipboard, the top film begins to peel off. That is why you should not wet the surface during cleaning. After wiping the top of the furniture, go over it with a dry cloth. Most dirt accumulates on the bottom drawers. In this case, we recommend making the upper facades from gloss, and the lower ones from more unpretentious materials.

2. Clean with hard brushes

If dirt or grease has become old, do not try to remove it with hard-bristled brushes. Yes, they effectively remove dirt, but at the same time scratch the surface. And damage on a shiny surface is very noticeable. If you cannot do without a brush, choose a product with the softest bristles or an old toothbrush of similar hardness.

3. Use products with abrasives

Abrasive particles are the worst enemy of a glossy surface. Household chemicals act aggressively, and the smallest ingredients scratch furniture. As a result, there will be recesses on the headset, into which dirt will become even more clogged. Not only will the set look worse, but it will also be more difficult to clean. Also make sure that among the ingredients of household chemicals there are no alcohol compounds, chlorine, acetone and other aggressive substances.

4. Use melamine sponge

A sponge is a good cleaning aid, but it is not at all suitable for gloss. The product literally erases the shine and the surfaces become dull. There is no need to take risks, because there are more effective and safe care options.

How to make it yourself

Many housewives try to use as few household chemicals as possible to care for their homes. Natural ingredients are a suitable basis for home polish. The ingredients are accessible, the preparation process is simple, the product has a pleasant smell and good polishing properties. An important point is that the components are safe for health.

Components:

• The main ingredient is flax seed oil. The natural composition is sold in any supermarket and pharmacy. You will need 7 tbsp. l. oily liquid;
• the second component is beeswax (2 tbsp is enough). The natural product must be crushed and heated in a water bath;
• the third ingredient is high-quality essential oil (you will need 15 drops). For a pleasant aroma of homemade polish, you can use lemon, grapefruit or tea tree oil. These varieties not only improve the smell, but also exhibit an antibacterial effect when treating surfaces.

How to make plum jam and how to store the sweet delicacy?
We have the answer! Read about the advantages and disadvantages of bimetallic heating radiators for apartments at this address.

On the page https://poryadok-v-dome.com/stirka/pjyatna/kak-otstirat-ruchku.html you can learn how to wash a handle from a white shirt without ruining the fabric.

How to make polish at home:

• Grind the wax, place the container in a water bath, heat the bee product, add linseed and essential oil;
• Mix the components gradually: add the oily liquid little by little. The same advice applies to natural esters;
• the mass should become homogeneous. Cool the polishing agent and pour it into a dark glass bottle;
• Use a homemade surface treatment in the same way as store-bought polish. A good option is a soft flannel or microfiber cloth.

Proper care for glossy furniture

1. Special facade compositions

The easiest option is to use professional gloss products. They carefully remove dirt from furniture and cover the surface with a protective film. Thanks to this, the furniture stays clean longer. It is enough to wipe it with a dry cloth to remove minor dirt.

2. Glass cleaning liquid

The composition for the care of glass and mirrors does an excellent job of cleaning the gloss. But before use, be sure to study the composition. It is important that it does not contain aggressive components. How to use? Apply the composition to a soft napkin or cloth and wipe the headset. You can also use gloss sprays, which will remove not only tiles, but also fingerprints from furniture.

3. Dish gel

Another option for gentle cleaning is to use dishwashing detergent. The substance removes grease, stains, including dried ones, stains and splash marks. Gloss sprays work in the same way and can be used to clean not only tiles.

4. Laundry soap

You can use laundry soap to make a budget-friendly facade cleaner. The lump product must be grated and dissolved in warm water. Liquid soap can be used in a similar way. Stir the liquid until foam appears and begin cleaning.

5. Wet wipes

If you need to clean up quickly, wet wipes will help. It is best to buy special cleaning products that are sold in hardware stores. For glossy furniture, only alcohol-free wipes are suitable, otherwise the surface will deteriorate over time.

Problem No. 3. Scratches appeared

If the scratch is small, try the good old remedy - sunflower oil. Try soaking a cotton pad in it and wiping the surfaces.

If the chip is of “moderate severity” but does not reach the wood, you can use:

1. Wax polish. Rub it thoroughly over the damaged area until it becomes smooth.
2. Special spray varnish for door repair (halo-free, based on one-component acrylic). It can be purchased from door manufacturers or sellers - you are unlikely to find it in a regular repair store. The rules for its use are described on the label of the can.

How to properly wash furniture

1. Remove surface dirt with a cleanser. Do not let it soak in so as not to damage the headset. To do this, apply the product first to a soft cloth, and only then to the gloss.

2. Proceed in stages, treating small areas with the composition, and not the entire surface at once. As soon as you complete cleansing one area, move on to the next, and so on until the end.

3. Wipe off any remaining detergent with a slightly damp, clean cloth. After this, use another cloth to rub the furniture dry and apply polish so that the gloss stays clean longer.

4. In order for a glossy set to “live” for a long time, it is important to follow several rules. First, install a good hood to suck out the smallest particles of fat and dirt. Secondly, protect the furniture from direct sunlight to prevent it from fading or dulling. To do this, cover the windows with roller or regular curtains and close them during hours of maximum solar activity.

Helpful information

Tips for removing scratches from a glossy kitchen:

1. 
   Restoration should begin immediately after the defect is discovered.

2. Before treatment, the surface is degreased. This will allow the polish to go on smoother and last longer. Alcohol can be used for this purpose. Solvents are not allowed to be used on gloss.
3. To give the headset shine, first rub it with a flannel cloth and then with a dry paper napkin.

If you are interested in how to remove small and deep scratches from various surfaces and objects, take a look at this section.

Features of polished furniture

Furniture coated with varnish has a number of negative qualities:

• Dust quickly settles on it;
• Hand stains remain;
• The surface of polished products is easily scratched and cracked.

Polished furniture requires special care; if this is not done, serious defects may appear. In order for interior items to last a long time and maintain their appearance, you need to pay attention to factors that harm varnished products:

• Excessive dryness of wood;
• High humidity;
• Exposure of wood to direct sunlight;
• Large accumulation of dust;
• Proximity of heating devices.

All this spoils the appearance of polished wood. Furniture becomes unattractive, quickly ages, fades in the sun, and becomes deformed. Spots and cracks appear on the varnish layer. To avoid damage to the wooden facade, furniture polishes are used. The right product will extend the life of polished furniture. How to restore polish for each type of wooden furniture will help you find out more detailed information about each of them.

Final tips

1. To reduce fingerprints, try to open and close cabinets using handles. And if you do it with clean hands, then there won’t be a problem at all.
2. The ideal option is handles that minimize contact with doors and drawers, as well as closers that prevent damage from constant impacts when opening and closing.
3. When choosing furniture, pay attention to the quality of the enamel or film. Better yet, rub the sample in the store. Leave a “greasy” handprint there and try to wipe it off. Happened?
4. Remember, cheap things cannot be of high quality. When purchasing, be sure to inquire about the quality of the varnish. A good varnish is made on a water or acrylic basis, while a bad one is made on cheap polyurethane, which changes color over time. PVC films also come in premium and economy segments. The latter also do not differ in quality, and premium films are comparable in price to more reliable acrylic coating.
5. If you want no water stains to be visible on the surfaces, choose white facades.
6. Before using a new product to clean your kitchen, try it on a small area of ​​furniture. It is advisable to wait a while after this and check to see if the coating has discolored or lost its brightness.
7. Do not use steam cleaners for cleaning. High temperatures under high pressure can damage the facade and destroy its upper layers.

Cleaning products that housewives can use

When choosing what to clean a kitchen made of glossy plastic with, give preference to liquid products used to clean glass. Such compositions cope well with greasy stains. Fingerprints, stains and splashes can be easily cleaned with special sprays. Their components are completely harmless to shiny facades and do not affect the saturation of shades.

• wipe dry with a soft cloth (microfiber can be used);
• apply wax-based polish;
• rub with a dry cloth.

This will create a repellent layer for grease and moisture, and will also enhance the shine of the gloss.

Disadvantages of MDF in the kitchen

The weaknesses of MDF kitchens are most often associated with the use of low-quality materials and technologies in order to save money. The most common are:

• Low resistance to sun rays;
• Peeling of the film, especially when there is a heat source nearby;
• Scratches appear when cleaning the material.

HOW TO AVOID THESE PROBLEMS?

We would like to remind you that our custom-made kitchens from the manufacturer are kitchens made from high-quality materials, made using German high-tech equipment. Watch videos from the factory on our Youtube channel; the website also contains quality certificates for each material. A warranty is included with every kitchen. The manager responsible for your kitchen controls your project from creation to full implementation in your home.

Contact us and take advantage of our DISCOUNTS and PROMOTIONS directly on the website!

Glossy kitchen: care features

What to use to wash the glossy kitchen surface depends on the type of material used in the manufacture of the facades. The gloss effect can be achieved in several ways:

• coating chipboard boards with plastic using postforming technology (under high pressure and temperature);
• coating with glossy paint or varnish;
• applying acrylic to MDF boards;
• gluing MDF boards with PVC film.

Budget glossy kitchens are made by covering slabs of inexpensive chipboard with plastic sheets. The facades are waterproof, so they are not afraid of wet cleaning. Dirt on the surface of the cabinets can be easily removed with water and detergent for a glossy kitchen, without worrying that the material will get wet and swell. To clean the facades, you can use soft rags and sponges. Hard brushes and abrasives will damage the glossy surface and should not be used.

Tip: You can clean kitchen cabinets covered with plastic using laundry soap. To do this, it is grated and dissolved in warm water. The resulting soap solution is used to treat surfaces and doors, after which the stains are washed off with clean water.

MDF boards are used for painting with glossy paint or varnish. Such kitchens are the most expensive, their production is more labor-intensive: the slabs are sanded, primed, sanded, dried, painted, and varnished. They look very beautiful, but are difficult to care for. Cleaning with large amounts of water, abrasive products, and aggressive chemicals are strictly prohibited. Wet cleaning is allowed, but the rag must be wrung out well from the water, and at the end of the procedure, the cabinets must be wiped dry.

To wash acrylic facades, you can use water and non-aggressive detergents.

We recommend learning how to make neat holes in jeans.
Read: how to quickly defrost a garage door lock in winter using available means and tools.

But facades covered with PVC film should be wetted with water as little as possible. To glue the film to the boards, the vacuum pressing method is used. There are no additional fixing compounds between the MDF board and the film, so if not properly cared for, it can swell and peel off. To avoid this, it is better to carry out cleaning using special means. Soap solution and water are not suitable for cleaning such a glossy kitchen. This material is not afraid of mechanical impact, but highly abrasive cleaning powders are still not suitable for it. They may disturb the glossy finish.

Problem #1. The entire facade is stained and stained

We dare to assume that you already have a whole arsenal of detergents and cleaning products on your shelf, you constantly wash and rub your kitchen furniture, but it still has “fingers” and drops all over it. These are the first questions gloss lovers might have.

How to remove fat?

There are now many products on sale for degreasing dishes and furniture. You can even use regular Fairy, Persil and the like. Apply the gel to a microfiber cloth, lather and wipe the facades with it. Then rinse with clean water and wipe the surface dry. For the last step, it is better to use disposable rags in rolls.

Life hack: for express care of glossy furniture, you can use ordinary wet wipes, even the cheapest ones. If you walk them over your headset every day, you can avoid streaks and maintain its neat condition.

True, this method is not suitable for general cleaning. Therefore, if you fry with an open lid and splashes of fat get on the furniture, do not be lazy and immediately wipe it with a cloth before the fat “petrifies”.

What products can and cannot be used?

Remember the golden rule: under no circumstances use abrasives or substances with an aggressive composition when cleaning. A glossy kitchen cannot be washed with products that contain powder, solvent or acid - this will only erase the surface and it will become covered with small cracks and scratches.

A glossy set is very easy to spoil with cleaning powders such as Pemolux or Comet. Moreover, their destructive effect will not be immediately noticeable, but over time the gloss may become cloudy or yellow.

Products with bleach will “help” you discolor facades - such as White, Domestos, Toilet duck, Cilit Bang.

Alcohol-containing substances are also not recommended - they cause the gloss to fade and lose its original appearance.

The detergents must not contain the following components:

• alcohol;
• acetone;
• chemical solvent;
• turpentine;
• nitroglycerine;
• synthetic resin;
• chlorine.

The presence of these components may damage the glossy finish.

You can use multi-purpose cleaners such as Edelweiss, glass washing liquids (without alcohol), polishes for glossy furniture. Everything you need will shine.

Any dishwashing detergent with a degreasing effect will do.

Stores now sell special products that create a protective crystal-like film and prevent the formation of stains on glossy furniture (Amway, Ultra Gloss, VuPlex). Typically, the procedure needs to be performed every 6–12 months.

What cloth to wipe with?

Microfiber is your friend forever. You can also use flannel or flannelette fabric, disposable wet wipes, or special cloths for washing car windows, which are sold already damp in containers.

The main thing is to avoid abrasive wipes, rags and sponges with hard bristles - for example, like those on the back of a dish sponge - otherwise scratches cannot be avoided.

Use only soft cloths - they can be soaked in a 1% soap solution or washing gel. The top can be wiped with a dry cloth or paper towel.

Then apply the polishing agent with a clean cotton or microfiber cloth and leave for half an hour until completely dry. After this, rub the furniture over the furniture again with a dry cloth to remove residual white stains from the polish.

The best cleaning polishes for furniture

Furniture must not be cleaned with solvents, alkalis, acids or dishwashing detergents. Special polish cleaners contain soft surfactants that remove grease stains and other contaminants without harming the material. However, it is still recommended to wear gloves when working with this type of product.

Nihon Detergent

Japanese spray foam for cleaning and polishing various surfaces equally well cares for furniture made of different materials and electrical appliances, helps clean and polish the floor.

The composition removes greasy and sticky stains, stubborn dirt, and food debris. Polish makes the surface smoother and shiny. After using the product, a subtle citrus aroma remains on the furniture.

The composition is sold in 400 ml plastic bottles. A finely dispersed sprayer is convenient for applying polish to large surfaces; the splashes do not scatter in different directions.

• suitable for different surfaces;
• cleanses contaminants of any origin;
• adds shine;
• light citrus aroma;
• Convenient packaging with a spray bottle.

• high consumption.

For frequent washing of complex stains, a bottle of Nihon Detergent lasts only a few weeks of use.

Cleaner-polish for wood Emsal

The German product Emsal polishes and carefully cleans wooden furniture. The almond oil in the composition takes care of the surface, but does not leave greasy stains after cleaning. Thick creamy texture fills small scratches and makes large ones less noticeable.

To clean old stains, leave the polish on for 5-10 minutes and only then wipe the surface. After polishing, dust settles much more slowly - the antistatic effect lasts for a week. The pleasant honey-almond aroma lingers on the furniture for several hours.

• aroma of almond and honey;
• makes scratches less noticeable;
• cleans old stains;
• has an antistatic effect.

• the surface becomes slippery.

It is not recommended to rub Emsal polish on staircase steps or other wooden floor coverings. After processing, a thin film will remain, which is easy to slip on.

Premium House

Multifunctional product Premium House polishes wooden furniture and cleans it of all types of dirt. The composition gently cares for the surface, easily copes with everyday dirt, fingerprints and restores shine. After processing, a protective layer remains that prevents natural wood from drying out and reduces the amount of dust.

The composition has a rich smell that can be felt on the furniture for some time. The polish is sold in 500 ml plastic bottles with a convenient dispenser spout.

• does not leave marks on furniture;
• creates an antistatic effect;
• convenient to dose;
• reasonable price (200 rubles for 500 ml).

• damages metal surfaces;
• not everyone likes the smell.

For best results, the Premium House composition should be left on the surface for 5-10 minutes, and then rub and rinse particularly dirty areas of the furniture.

How to remove scratches from clear plastic

Transparent plastic is no less susceptible to scratches than matte or colored plastic. As a rule, there may be many objects in the house that have a surface made of such plastic. Quite often the plastic lenses of glasses, most often sunglasses, get scratched. It should be noted that such damage can impair vision and simply make their use uncomfortable.

Small scratches on transparent plastic can be removed using available means:

• Jewelry polish. Apply to glass and then polish with a microfiber cloth.
• Mixing Vaseline and wood polish can remove scratches from clear surfaces. It is important to continue polishing until all traces of Vaseline have disappeared.
• A paste that removes scratches from computer disks works well; it is applied to the surface of glasses using a microfiber cloth.
• Glass cleaner and glass abrasives do a good job of dealing with this kind of damage. In addition, they will perfectly help solve the problem of fogging.

Removing scratches from plastic surfaces is a task that every person faces sooner or later, because objects made from this material fill every home and surrounding area. It is worth emphasizing that removing minor damage is quite possible at home, while deeper damage is best removed using professional means or the help of specialists.

Nowadays, plastic is very common in everyday life; it literally surrounds us on all sides. Mobile phones and other devices, a variety of household appliances, most interior items, kitchen furniture and even a car - everything is included in the scope of application of this miracle material. It is so popular due to its many parameters, but it is also characterized by low wear resistance. One way or another, everything in this world is not forever! Sooner or later, the plastic surface wears out and becomes covered with microdamages, no matter how carefully you treat things. But how can you return your favorite thing to its original appearance, so that your inner esthete rejoices? Now we will try to answer this question!

Plastic kitchens are popular and prone to scratches

So, for example, when working with a deep scratch, it would be better to use colored products to make it as invisible as possible. And with small scratches you can get by with colorless products or use a polish with a soft silicone texture (abrasive particles are of no use here). Before the procedure, the area you are going to work with must be degreased with alcohol or acetone, and it is better to apply the product and polish using a soft flannel cloth, linen or cotton cloth. By the way, an ordinary baby diaper is also perfect.

Scratch removal pencils

There is also one rather interesting method for people who are confident enough in their skillful hands or for those who will not be too upset about a damaged item if something does not go according to plan. This method consists of carefully heating the damaged area with a lighter, without bringing the flame closer than half a centimeter. Thus, the edge of the scratches will melt and slightly change the relief of the damage. But I repeat: this must be done very carefully, because the result of overheating will be too much deformation and a damaged item.

Rock it! But don't burn it!

The composition of this miracle paste from the Mesozoic era, or more precisely, the thirties of the last century, includes such a chemical element as chromium. It is this that allows you to grind plastic, and even metal, hiding all the irregularities and roughness, giving smoothness to any of these surfaces, and eliminating scratches.

It is only important not to confuse the grain size of the paste used, because one type - with a coarse grain, can, on the contrary, severely scratch the polished surface, and No. 1, with a fine grain, on the contrary, will bring it to a shine, but will not even out deep scratches.

Tested for centuries

Every housewife has this product in her kitchen, so it can be used as one of the cheapest options for solving the problem.

For example, scratches from a mobile phone screen can be removed using a circular motion by rubbing a paste of two parts baking soda and one part water. After achieving the desired result, remove the remaining soda with a damp cloth.

The solution is at hand

We all use glasses (whether to improve vision or sunglasses - that’s not the point), but we perceive cases for them more as an accessory on a shelf, a thing that takes up space in a purse, and is generally useless. But in vain! Even wearing it over the head, outside of wearing it on the bridge of the nose, will not protect against scratching. Branches of trees encountered along the way, low ceilings, openings and much more sometimes lie in wait unexpectedly, and a seemingly tiny scratch interferes with normal visibility and even becomes dangerous for vision. What can we say about damage due to anti-glare glasses, just bought for a long-awaited vacation, thrown on the beach pebbles.

How to fix the situation? We suggest using what you have at hand on vacation, and upon arrival correcting the situation with more serious methods. If you brought with you office equipment and a product to care for it (for example, microfiber cloths soaked in a special product), use it, removing it in a circular motion, just like scratches from computer disks.

Case - not packaging upon purchase

If you take the issue of reincarnation seriously (for example, the glasses were not yours at all, but you need to return them to your friend safe and sound), use a glass abrasive, which is used in painting and contains hydrofluoric acid. It does not mask, but rather “solds” all the cracks of plastic glasses.

Didn't fit into the turn

An unexpected discovery for you may be the use of polishes for wooden products to remove scratches on plastic products. Unbelievable but true! Rub a cotton pad soaked in this product until the unfortunate scratches disappear. Using the same method, but with the addition of Vaseline, you can get rid of scratches from plastic glasses lenses.

The car radio display will be saved

What products should not be used?

The choice of options for how to wash a glossy kitchen without streaks is so huge that it’s difficult to figure it out. First of all, it is advisable to immediately remember which products should be avoided. This list includes:

• all kinds of solvents, for example, acetone;
• alcohol;
• preparations containing soda or salt;
• ammonia;
• nitroglycerine;
• polymer resins.

When choosing how to clean a glossy kitchen from grease, it is better to abandon the melamine sponge or use it with extreme caution. It perfectly removes marker marks, but can harm varnish and acrylic surfaces.

Before use, the melamine sponge must be moistened and wrung out thoroughly. This will soften it, preventing it from leaving scratches on the surface of the furniture.

Next, wash the glossy kitchen, or rather the contaminated areas, lightly pressing the sponge. If you press too hard, the melamine will break down and scratches will form on the surface. When the process is completed, you need to wipe the glossy facade with a damp cloth.

So, a glossy kitchen can cause a lot of trouble for its owners. In particular, you need to know how to clean glossy kitchen facades, what products to use and how to use them correctly. However, with proper care, the furniture will delight its owners with a brilliant, original appearance. And the variety of stylish solutions allows you to purchase a glossy kitchen for any budget and taste.