How to remove scratches on a chipboard tabletop?

Mechanical damage - scratches, abrasions - greatly deteriorate the appearance of the furniture. Even minor defects can ruin the aesthetics of interior items if they are on the front surface. Usually their cause is natural wear of wood or exposure to external factors.

There are different methods to remove scratches from furniture. Using inexpensive means, you can update products and save on buying new ones.

Scratches and abrasions on wooden furniture

Laminate surface repair

Quite often, kitchen furniture is made from chipboard - chipboards, which, for greater strength, are covered with a special film - laminated. But, nevertheless, this material is not resistant to moisture, high temperatures and intense mechanical stress.

You can repair a chip or other damage at home. To do this you will have to stock up on the following materials and tools:

shavings (sawdust will also work);
hairdryer;
saw;
PVA glue.

The process of restoring a laminated chipboard countertop consists of the following steps:

You should turn on the hairdryer and warm up the damaged area;
after drying, the peeled coating should be removed;
the area is covered with a layer of glue and left alone for a quarter of an hour;
prepare a mixture of sawdust or glue and infuse for 10-15 minutes;
the composition is poured into the recess and compacted with a spatula;
excess glue is removed and the table is left to dry for 24 hours.

To protect the countertop from moisture, especially in previously damaged areas, it is recommended to seal the most vulnerable areas with a sealant. This method is also suitable for removing chips on an MDF tabletop.

Upgrade with PVC film

Restoration does not always mean only returning facades to their original appearance and replacing fittings. Modern methods of decoration make it possible to change the appearance of a kitchen beyond recognition, using quite affordable means.

One of these options is vinyl film, or rather, a sticker with an image on PVC film. Moreover, the image can be anything - from a wood pattern to an ornament of any complexity or a landscape.

Quite often, this technique is used to change the style of the kitchen or simply diversify the design. To do this, decorate an area or two doors with a sticker. If they want to update their entire set, all facades are covered with vinyl film. The choice is entirely determined by the style of the room.

Paneled facades are very suitable for such kitchen renovations. The frames are painted or also covered with a film of a different color, and the inner surface is decorated with self-adhesive film.

The photo shows a successful solution in the Art Nouveau style.

Restoration of artificial stone countertops

Despite the strength of this material, flaws may appear on it and you can get rid of them at home. To remove a scratch from a kitchen countertop, a mixture of polyester resins is required, which makes even significant defects invisible.

The restoration proceeds as follows:

around the damaged area it is necessary to clean the surface and degrease it;
particles of material are removed from the recess, it is expanded and made deeper;
the damage is covered with polyester resin and left to dry for 20 hours;
Afterwards, the tabletop is sanded, first with an abrasive material and then with felt.

This kind of work is quite painstaking and requires certain skills in working with the tool. Therefore, if you have no experience, you can contact a specialist.

Final tips

Cleaning your kitchen with a steam cleaner.

Thick curtains that protect glossy furniture from sunlight.

We can say in favor of glossy surfaces: dirt does not eat into them, so it is better to rub them once a week with microfiber with a special product and enjoy the pure shine, than to flatter yourself with the hope that there is no dirt on matte facades - which means there is no need to wipe them.

If you make it a habit to “automatically” wipe kitchen cabinets, tables, facades, etc. every day. with a damp cloth, then once a month you won’t have to rub them until they shine and your hands will tremble, nervously remembering the day you chose gloss (on your head).

Thus, if your kitchen facades are covered with glossy enamel, acrylic, paint or film, just follow our care recommendations - and they will retain their shine and rich colors throughout their entire service life.

In the modern world, plastic surrounds us everywhere, be it car panels, window sills, sunglasses or a mobile phone. The distribution is due to the fact that it is light in weight and easy to handle. Nevertheless, it is susceptible to damage, so sooner or later the question arises of how to remove scratches from plastic on this or that thing.

Most often, damage can appear on car parts, for example, the dashboard or doors, this may be due to the careless placement of keys, phones and other objects on it. It's also quite easy to scratch glasses that have a plastic base when they are carelessly placed on a table or in a bag.

Repairing damage to a plastic table

Quite a popular material used for the manufacture of kitchen furniture, which does not swell or get wet. However, mechanical stress on plastic furniture often leads to the formation of cracks or chips, especially in the kitchen.

To repair such a countertop, you will need a special adhesive composition intended for plastic products. This will allow the loose covering to be reattached.

If minor flaws appear on the table - cuts, scratches, then you can do without expensive glue; you can also use regular instant glue for these purposes.

If a large piece breaks off, then it is best to use Titan glue. The plastic is ground to a powder state, mixed with an adhesive, and the damaged surface is sealed with this mixture.

How to care for the surface to prevent new damage?

To prevent new scratches from appearing in the kitchen, you need to adhere to the following recommendations:

Do not attempt to polish the surface of cabinets with abrasive cleaners. It is unacceptable to use soda, a hard metal brush, or even a towel with large pile.
Some housewives use melamine sponges to remove stubborn stains. However, they are not suitable for processing glossy surfaces, as they leave behind damage invisible to the eye. Over time, dirt will clog in them and the surface will become cloudy.
To clean stubborn stains, you can only use special products designed for treating glossy surfaces.
Do not use aggressive household chemicals for glossy plastic. This applies to products based on chlorine, acid, and acetone. After them, the gloss will become rough and cloudy. Lack of quality protection is a direct path to scratches.
When cutting food, you need to use cutting boards.

By following these recommendations, you will be able to avoid new scratches in your kitchen.

Restoring integrity to a glass tabletop

If chips or other defects appear on glass furniture, then restoration on your own is impossible. To remove even the smallest scratches you will need professional equipment. If there is significant damage, the table cannot be “reanimated” and there is only one way out - replace the product with a new one.

To protect the glass from scratches, it is recommended to use fabric coasters or cover it with a tablecloth.

Damage to the countertops can be associated both with poor-quality material from which they are made, and with improper use. However, regardless of the reason, in most cases, there are ways to fix it.

What not to use

There is a strict taboo on certain products in the kitchen. They must not be used under any circumstances. These are aggressive solvents, abrasives and similar compounds.

Solvents

Plastics, polymer films, paint coatings are sensitive to the action of organic solvents. In order not to permanently spoil the surfaces of the countertops or facades, before using the product, you should study its composition indicated on the label. If the word “solvent” is there, you cannot use the reagent.

Nitroglycerine

A transparent liquid slightly reminiscent of oil in consistency cannot be used for cleaning the kitchen. It cannot eliminate pollution, and there will be no particular benefit from such an alternative. And the remaining oily stains will then be difficult to remove from the glossy surface.

Alcohol

Most alcohols, including ethyl alcohols, are solvents. Alcohol-containing liquids contribute to the destruction of the integrity of paintwork coatings and loss of gloss.

Ammonia

Ammonia is also an organic solvent. Therefore, the benefit of its use for cleaning varnished surfaces and plastics is questionable.

Polymer resins

Components of adhesives and varnishes, which are polymer resins, of course, cannot be used to clean coatings. In addition, if accidentally applied to a surface, they create the following problem: how to remove this composition from the coating.

Soda and salt

Generally harmless components, however, can cause serious harm if used inappropriately. Both soda and salt are mildly abrasive materials and will certainly leave scratches on glossy facades and destroy the shine of the coating.

The main causes of scratches

Before you start eliminating scratches, you should find out the reasons for their occurrence. This is necessary in order to prevent the formation of defects in the future. The main reasons include:

Exposure to abrasive substances, including sand and dust. For this reason, minor and barely noticeable defects appear on lacquered furniture.
Damage caused by pets' claws or various sharp objects.
External mechanical influence. The largest and most problematic chips appear from impacts from furniture.

How to remove scratches

Detected defects can be removed using improvised or specialized means. If there is serious damage, it is possible to combine several methods.

Special marker

A marker has been created for processing a polished surface, which allows you to restore the attractive appearance of the product. The principle of operation of the marker is the penetration of microparticles into cracks and subsequent filling of the scratch. The marker is colorless and has a consistency similar to paints and varnishes. The applied substance on the surface is not washed off with water and creates protection against new scratches.

How to remove grease stains from glossy furniture

You won't be able to avoid stains from greasy hands or food marks on the surface of furniture. But several secrets will help reduce the time of labor-intensive cleaning:

Prepare paper towels. You can wipe the surface of glossy furniture on which a stain has just appeared with paper towels or napkins. It is enough to blot the greasy stain and not a trace will remain of it.
We use warm water. There is no need to rush to use more aggressive chemical cleaning products. In a situation where a stain has just appeared on the gloss, a sponge or cloth moistened with warm water can eliminate the problem.
We use soda. Difficult, old stains from a glossy surface can be removed with baking soda. The powder is mixed with water to form a paste and gently applied to the stain.

After ten minutes, the soda slurry is carefully removed with a paper napkin.

Taking into account all the recommendations for glossy surfaces, the cleaning process will go faster, and the furniture will retain its shiny appearance longer.

Folk remedies

Various products have become popular among people that also effectively eliminate damage to furniture. Most of the methods described do not require any special costs and are easy to use.

Walnut kernel

When rubbing scratches with a walnut kernel, the damaged area is gradually filled with mass and becomes almost invisible. The procedure can be performed several times in a row to achieve a better effect. It is possible to replace the kernel with nut oil and wipe the scratches by applying the substance to a napkin.

Mayonnaise

The effectiveness of mayonnaise is ensured by its strong penetration into the wood structure. Mayonnaise should be applied to the damaged area several times with an interval of 2 hours. After treatment, the wood will swell and the crack will fill on its own. This method can eliminate defects on any wooden furniture.

Vinegar with vegetable oil

It is recommended to treat light furniture with a mixture of olive oil and vinegar, using the components in a ratio of 5:2. The damaged area is wiped with the mixture and left for a day for complete absorption. Then the furniture is polished with a rag.

Sandpaper

Fine-grained sandpaper helps remove defects on steel furniture elements. The damage is smoothed over with sandpaper and, if necessary, treated with putty. After the material has dried, paint is applied to match the color of the product to mask the area.

Mastic

You can paint over small scratches on wooden products with mastic. The material is distributed on the surface and rubbed with a napkin. To make your own mastic, you need to melt 40 g of wax, add 30 g of turpentine and a teaspoon of alcohol, and then mix thoroughly.

Colored crayons

Colored crayons contain wax, which allows you to paint over scratches. To achieve the desired effect, you just need to choose the right color crayons.

Paraffin

Candle paraffin is kneaded, applied to the damaged area and rubbed until the defect is eliminated. When processing glossy furniture, you need to wipe the surface with a soft cloth after completing the restoration. It is enough to remove the remaining paraffin from the matte surface.

Eyebrow pencil

Applying an eyebrow pencil to scratches can visually hide them.

The disadvantage of using this method is that the pencil wears out quickly, which is why you have to constantly touch up defects on the furniture.

By mixing ground coffee beans with a small amount of liquid, you get a semi-thick substance to remove scratches. Apply the substance to the scratches using a cotton swab or disk. You can eliminate defects with coffee only on dark furniture.

Lemon juice and oil

A mixture of lemon juice with vegetable or olive oil in equal proportions is also suitable for treating damaged furniture. The mixed components are applied to a clean, lint-free cloth and the surface is polished, making movements in the direction of the scratch.

How to restore the shine of a glossy kitchen surface

Kitchen surfaces get dirty faster than others in the apartment. During cooking, droplets of fat fly throughout the room. They settle on the walls of cabinets, countertops, and hoods. Over time, the fat forms a continuous sticky film, to which dust, pet fur, and dust blown in during ventilation are firmly stuck. Furniture in the stove area suffers the most.

Another vulnerable spot is the handles of cabinets and drawers. The area around is usually covered with a thick layer of prints, to which more and more dirt is gradually added.

For kitchen sets with a shiny finish, it is better to use microfiber cloths or homemade flannel cloths. After washing, the surface should be wiped dry with a paper towel - this will help avoid streaks;
Aerosol detergents are a convenient solution for cleaning kitchen surfaces. Spray Cif Anti-grease spray on the cabinet doors and wipe with a damp cloth. To remove old stains, leave the product on the surface for a few minutes. The active components of the aerosol break down kitchen dirt and enhance the shiny effect;
General cleaning in a glossy kitchen can be carried out with universal detergents and dishwashing liquids with a degreasing effect. It is enough to squeeze a few drops onto a napkin, wipe the dirty surface and wash off the foam. Gloss does not like contact with water - it will not disrupt the structure of the coating, but will leave behind stains. Wring out napkins and cloths thoroughly before use;
For everyday care of a glossy facade, it is convenient to use universal wet wipes for the kitchen. Soft fibers do not scratch surfaces. Thanks to a special surfactant impregnation, they easily wash away grease and dirt, leave no streaks and maintain shine. Keep napkins on hand to immediately wipe up any grease, sauce, or other spills;
To ensure less dust settles on the kitchen façade, use special antistatic sprays for glossy coatings;
Vinegar and water mixed in equal proportions will restore the shine to your kitchen. It is more convenient to apply the solution with a spray bottle. After drying, the facade should be polished with a flannel cloth.

Read the instructions carefully before using a new detergent. Test it on an inconspicuous area.

To make cabinet doors collect fewer fingerprints, get into the habit of opening and closing them using the handles. In addition, you can install internal closers - this will reduce contact with the glossy finish, and the door hinges will last longer.

As you have already learned, preventing scratches from occurring on your favorite surfaces is much easier and cheaper than trying to disguise them later. Scratches on surfaces are caused not only by not using a cutting board when cutting food, but also by improper cleaning with cleaning powders. Cleanipedia recommends ditching cleaning powders in favor of cleaning creams and sprays. Cif cream and spray will protect the surface from scratches and restore the shine and shine of your favorite furniture!

Originally published March 17, 2022

How to hide deep cracks

Very noticeable damage to furniture cannot be easily hidden with improvised means. To restore the original appearance and restoration requires a comprehensive approach to solving the problem.

Preparing the site

Before starting work, you need to thoroughly clean the surface of the furniture from dust and dirt. The cleaned area is coated with a degreasing agent and allowed to dry. Also at the preparation stage, you need to decide what material will be used to hide defects.

Applying the material

The purchased material is applied with a suitable tool or cotton pad to the damaged area. When applying, try to ensure uniformity. Excess material is carefully removed with a spatula.

Grouting the surface

After treating the scratched areas, you need to wipe the surface. During this procedure, the furniture coating becomes smoother and more even. As a rule, fine-grained sandpaper is used for grouting.

Painting

A layer of paint is applied on top of the applied masking material, which matches the color of the rest of the furniture. Paint not only visually hides defects, but also provides additional protection against new damage.

Useful tips

Oddly enough, amateur attempts to repair chips or restore more serious damage to furniture sometimes cause more damage than simply tinting or painting a furniture touch.

For example, you should not use water-based dyes to fill scratches, cracks and swelling of furniture veneer. Do not use iodine, strongly brewed tea, an aqueous solution of potassium permanganate, watercolors, gouache, or car varnishes. As an exception, you can temporarily mask scratches on furniture with walnut.

All of the above can hide the damaged area for a while, but, as a rule, it causes swelling of the decorative coating due to swelling of the wooden base of the furniture.

The largest chips and even breaks, which often happen on armrests or the ends of doors, cabinets, especially kitchen furniture, can be treated by applying a repair varnish layer to the entire front surface. In this way, it is possible to preserve the mirror of the lacquered surface, and this is the most important thing in the restoration of wooden furniture. If you repair chips and the entire panel of furniture with “solid” varnish, then the damaged area may not be visible even with the most careful examination.

Features of working with glass surfaces

In order not to damage the fragile glass surface, you need to take into account a number of nuances during processing. The main rule is to be careful. It is also important to select suitable products that do not harm glass products to complete the work.

Paste GOI

Deep scratches on glass can be removed using GOI paste. If possible, glass should be removed from furniture for ease of processing. A small amount of paste is applied to the fabric and spread over the surface. Then rub the product in a circular motion into the damaged areas. Remains of GOI paste after treatment are removed with a damp cloth.

Nail polish

Minor scratches on the glass coating can be easily masked with nail polish. A prerequisite is the transparency of the varnish. The substance must be applied with a brush to the scratched areas and wait until the varnish fills the crack and dries. The remaining varnish is carefully wiped off the surface with a soft cloth.

Restoring the appearance of products made from other materials

Leather products are restored using beeswax or specialized wax. If the color is suitable, the scratches are masked with nail polish.

The same result can be obtained after treating leather upholstery with vegetable oil.

Plastic surfaces are softened with a powerful hair dryer. The procedure is performed carefully so as not to deform the product.

Electrically driven tools are used to grind durable metal.

Such products are processed with a consistent reduction in the grain size of the abrasive material. At certain stages you can apply the “GOI” post. If the technological operations are carried out with high quality, you will get a perfectly smooth mirror surface.

Expert opinion

Strebizh Viktor Fedorovich, leading construction foreman

Universal products in this category are suitable for the restoration of products made from solid wood, fiberboard, chipboard, laminate, plywood, cork, and some polymer materials. If you want to clarify something, please contact me!

How can you restore furniture made from laminated chipboard?

Furniture made from laminated chipboard is found in every home and office. This is the most budget-friendly and quite decent-looking furnishing option. In more expensive versions of furniture, only the body is made from chipboard, while the facade part is made from MDF with various types of cladding (PVC film, veneer, enamel) and solid wood. MDF and solid surfaces may also require restoration, but we will not talk about them. This article contains information on how to restore chipboard with a laminated surface with your own hands .

Do-it-yourself chipboard restoration can be of several types:

Restoring the color of a worn (worn) surface.
Masking chips and scratches on the surface.
Restoration of chipped ends of chipboard furniture.
Restoration of places with torn fasteners and hinges.

Each of the defects requires its own approach to restoration and a different set of available tools.

Removing scratches from polished furniture

Method 1

Mix water and vinegar in a 3:1 ratio.
Pour 2 tablespoons of vegetable oil into the solution.
Soak a cotton swab in the mixture.
Rub the scratches until they disappear.
Polish the surface of the furniture with a flannel cloth or lint-free cloth.

This is interesting! Thanks to this method, you can not only get rid of scratches on furniture, but also protect its surface from dust, because it will settle much less.

Method 2

A labor-intensive but effective option is to use furniture polish:

Take special equipment.
Apply it to damaged areas of furniture.
Rub until the scratches disappear.

Method 3

Uses of walnuts:

Peel one nut and remove its core.
Rub the inside of the walnut onto the scratches on the furniture so that the nut oil penetrates into the material.
Wait a couple of minutes until the scratch begins to darken.
Repeat if the effect is not fully achieved.

Restoration of chipboard furniture: what you might need

Soft furniture wax (wax putty). Used to seal chips, scratches, cracks on wooden and laminated surfaces of cabinet furniture, interior doors, laminate and parquet. Provides moisture resistance to the restored surface.
Hard furniture wax (melt putty). Requires melting before use (for example, using a lighter, soldering iron or gas torch). Application is similar to soft furniture wax. Recommended for restoration of chipboard surfaces with high intensity of use (countertops, shelves, floor coverings).
Retouching agents - felt-tip pens or alcohol-based markers, valve and fiber. With their help, the texture of the material at the restoration site after waxing is completed to make it less noticeable. Ordinary felt-tip pens in shades that match the furniture, strokes, paints, even shoe polish and iodine will also work.
Fixing varnishes, polishes (best in the form of sprays and aerosols) for surface treatment after restoration. For coating after restoration of defects, returning surfaces to their former shine, masking abrasions and minor scratches.
Melamine edging with adhesive for replacement trim.
Two-component epoxy composition, PVA, dowels (chops), wooden plugs for filling holes from torn hinges and other fasteners.
Tools – plastic spatula, sandpaper, abrasive sanding sponge (fine), utility knife, hair dryer or iron, chisel, non-woven wipes and rags for finishing.

Getting rid of damage

You can get rid of traces of mechanical damage on wooden surfaces using professional products and folk recipes. They must be chosen taking into account the color, texture and capabilities of the housewife. If the furniture is expensive, it is better not to save money. There is a risk of damaging the interior item and incurring additional costs.

Wax

Furniture wax can be soft or hard. The first is used to remove shallow defects, the second is used to restore parts with serious damage. An additional plus is the color range, which allows you to restore any wooden product.

Soft wax has a rich palette and is easy to use. Hard is more durable and durable.

The algorithm for working with any type is identical:

Clean the wood.
Heat the material.
Apply to damage.
Leave for 15-20 minutes to dry.
Polish the surface.

Excess wax must be removed; it is better to use a plastic spatula for this.

Shoe polish

I don’t always use the product for its intended purpose. Housewives recommend using it to restore wooden surfaces. Shoe polish is convenient to apply with a sponge, but there is a drawback - it is difficult to choose the desired shade.

Mode of application:

clean the wood;
apply the product;
let dry;
Remove residues with a soft, lint-free cloth.

The method is effective, but temporary; after 2-3 wet cleanings, the scratch will be noticeable again.

Furniture touch

This is a ready-made restoration material that is easy to use. The appearance resembles a clerical touch; you can purchase any shade in specialized construction stores and supermarkets.

Mode of application:

Apply the product in several layers to the damaged area using a brush until the defect is eliminated.
Remove excess with a hard, but not sharp, object. The edge of a plastic card will do. Polish the surface with a soft cloth or felt.

To match the color, you can use a special marker or cover the area with varnish. It is better to use the product in a spray bottle. When using a furniture touch, it is necessary to take a break between manipulations for at least 15 minutes, otherwise the layers will not dry well.

Using a stroke to restore a wooden product - in the video:

stain

The universal liquid effectively removes microdamage on wood. The composition penetrates deeply into the structure of the material, colors it, but retains its texture. The stain is applied with a brush in several layers and effectively masks surface defects.

Polish

Wood furniture polishes easily mask shallow scratches, remove stains and add shine to the surface.

The funds may be based on:

wax;
oils;
silicone

Oil – fills scratches and damage, the surface becomes smooth and shiny. An excellent product for removing scuffs and scratches on wooden surfaces.

Silicone is the leader among polishes. It has a more liquid composition and performs several functions:

Fills voids caused by mechanical damage (scratches, chips).
Cleans the surface from dirt.
Protects the surface from moisture.
Has antibacterial properties.

Wax – evenly covers the surface with a protective fatty film, which is an organic antistatic agent. As a result, shallow scratches become invisible.

Beeswax polish is not effective on all surfaces. Metal, plastic, glass, and natural stone should not be treated with this product.

Walnut

Walnut masks scratches thanks to the natural dye juglone. The organic compound is present in the juice of the peel and pulp.

Widely used:

for dyeing fabrics, especially wool,
as ink
in the food industry and cosmetology.

Another plus is that juglone is toxic to insects and is an effective herbicide.

Walnut fruit will help to visually hide mechanical damage on wooden furniture. To do this you need:

split the kernel into halves;
treat the damaged area of one of the parts without using physical force;
let the juice soak into the surface;
remove oily shine with a soft cloth.

Don't expect instant results; the effect will become noticeable after drying. You can replace the walnut fruit with nut oil, which must be applied to a napkin and treated the surface.

Restoration of faded and worn chipboard countertops

Often, during use, chipboard countertops and cabinet covers wear out.

A tabletop that has faded from abrasion without severe defects on the surface (deep scratches, cracks) can be restored as follows:

Select the coloring agent according to its shade. It is best to use felt-tip pens - you can moisten a rag with them and rub in soft circular motions and walk across the tabletop until it acquires an even color. Then fix the tint with a fixing varnish.
In some cases, it is enough to treat a chipboard tabletop with polishing mastic with pigment (available for sale for light and dark furniture) or polish for laminated furniture. After applying the product, the surface must be polished with special lint-free wipes.

Problem #1. The entire facade is stained and stained

We dare to assume that you already have a whole arsenal of detergents and cleaning products on your shelf, you constantly wash and rub your kitchen furniture, but it still has “fingers” and drops all over it. These are the first questions gloss lovers might have.

How to remove fat?

There are now many products on sale for degreasing dishes and furniture. You can even use regular Fairy, Persil and the like. Apply the gel to a microfiber cloth, lather and wipe the facades with it. Then rinse with clean water and wipe the surface dry. For the last step, it is better to use disposable rags in rolls.

True, this method is not suitable for general cleaning. Therefore, if you fry with an open lid and splashes of fat get on the furniture, do not be lazy and immediately wipe it with a cloth before the fat “petrifies”.

What products can and cannot be used?

Remember the golden rule: under no circumstances use abrasives or substances with an aggressive composition when cleaning. A glossy kitchen cannot be washed with products that contain powder, solvent or acid - this will only erase the surface and it will become covered with small cracks and scratches.

A glossy set is very easy to spoil with cleaning powders such as Pemolux or Comet. Moreover, their destructive effect will not be immediately noticeable, but over time the gloss may become cloudy or yellow.

Products with bleach will “help” you discolor facades - such as White, Domestos, Toilet duck, Cilit Bang.

Alcohol-containing substances are also not recommended - they cause the gloss to fade and lose its original appearance.

The detergents must not contain the following components:

alcohol;
acetone;
chemical solvent;
turpentine;
nitroglycerine;
synthetic resin;
chlorine.

The presence of these components may damage the glossy finish.

You can use multi-purpose cleaners such as Edelweiss, glass washing liquids (without alcohol), polishes for glossy furniture. Everything you need will shine.

Any dishwashing detergent with a degreasing effect will do.

Stores now sell special products that create a protective crystal-like film and prevent the formation of stains on glossy furniture (Amway, Ultra Gloss, VuPlex). Typically, the procedure needs to be performed every 6–12 months.

What cloth to wipe with?

Microfiber is your friend forever. You can also use flannel or flannelette fabric, disposable wet wipes, or special cloths for washing car windows, which are sold already damp in containers.

The main thing is to avoid abrasive wipes, rags and sponges with hard bristles - for example, like those on the back of a dish sponge - otherwise scratches cannot be avoided.

Then apply the polishing agent with a clean cotton or microfiber cloth and leave for half an hour until completely dry. After this, rub the furniture over the furniture again with a dry cloth to remove residual white stains from the polish.

Restoration of chips and scratches on tables, cabinets and cabinets made of chipboard

Chips at the ends of lids and table tops, especially at radii, are not uncommon for children's and office furniture.

They can be removed altogether if the end of the furniture is covered with melamine edge. To do this you need:

Purchase a new melamine edge with glue of the desired shade and thickness (it is usually sold in strips in the same place where chipboard and furniture fittings are sold).
Remove the old edge by heating the end with an iron.
Sand the end using a chisel and sandpaper until the chips disappear.
Apply the new melamine edge using an iron, carefully cut off the excess with a utility knife and sand with a sponge or fine-grained sandpaper.
If necessary, tint along the edge - with a stroke or felt-tip pen.

If the chips are deep enough and it is not possible to grind them off, then such defects can only be masked:

Process the chips, clean them from dirt and give them a more regular shape with straight edges using a chisel.
Select the shade of furniture wax. Sometimes you have to mix several different crayons; in its pure form it is unlikely that you will be able to find the right color.
Using a plastic spatula, lightly fill the chip with furniture wax and compact thoroughly.
After the wax has dried, carefully cut off the excess using a spatula or a utility knife until the surface is level and the edge is straight.
Sand with a rag, if necessary, restore the texture close to the overall chipboard pattern using retouching felt-tip pens (short thin lines, smearing the borders with a napkin). Afterwards, fix the result with a fixing varnish.

In a similar way, deal with scratches and dents - select the wax or stroke according to the shade, fill it until it is level with the surface, sand it, retouch it and treat it with a fixing varnish or polish.

How to restore veneer

Veneered furniture requires a special approach. The means are basically the same, the methods are different. For example, if after getting hit the veneer is swollen, fill a disposable syringe with PVA glue, pierce the bubble, and inject glue into the cavity. Place a piece of thick fabric on top and place a weight. If the surface is uneven (convex or concave), use a thick fabric bag with heated sand as a load.

Such veneer damage is restored in two stages. First, the swelling is eliminated, then the scratch is painted over and the coating is restored.

If the veneer is glued with alcohol glue, you can return the swollen part to its place by ironing it through a rag with a hot iron. But do not overheat the iron: the veneer may stretch. Heating level is medium.

If ironing with a dry cloth does not help, try repeating the operation with a damp cloth (wet it and wring it out well). There is a chance that the wood will swell and become more elastic. To reliably fix the swelling, you can introduce PVA there and then heat it with an iron.

If the swelling is cracked, you can also try to seal it with heating (through a rag). If it doesn’t work, tear off the peeled piece. You don’t cut it, but rather break it off: on veneer, breaks after restoration are less noticeable than cuts. Therefore, you break off the lagging piece. Remove the old glue from the damaged area and the piece of veneer (with sandpaper or a nail file, depending on the size). Next, the repair of veneer on furniture is standard: spread it with PVA glue, lay it down, aligning the fault lines, lay a thick fabric on top and place a weight until it dries.

Such veneer peeling can most likely be eliminated simply by ironing it with an iron.

Scratches and traces of restoration on veneer are removed in the same way as on wood: they are painted over with a furniture marker of a suitable shade. If the scratch is deep, a little melted furniture restoration wax is applied to it (with a spatula). After drying, the wax is ground, and if necessary, fine-grain sandpaper is used, but after this treatment, the restored piece is covered with a layer of varnish.

Do-it-yourself furniture restoration requires patience and accuracy. You have to act gradually and methodically: smear it, wait for it to dry, level it, smear it again, etc. Sometimes you have to try several methods: damage varies, as do the materials used in production (glue, varnish, etc.). But as a result, the furniture will look much better.

Source: stroychik.ru

Restoration of a chipboard cabinet

Do-it-yourself restoration of a cabinet made of chipboard may also be necessary in cases where hinges and other fasteners are pulled out of the side walls due to excessive load.

Since the hinges cannot be moved to another location, they have to be strengthened somehow, the place of the torn fastener restored, and screwed in again. This can be done in the following ways:

Drill out the joint with a drill with a diameter of 8 mm and drive in the chop. You can then screw a self-tapping screw with fasteners into it, but only after drilling with a thin drill - otherwise the chop may burst. If the edges of the chip do not overlap with the fittings, by analogy with the cases discussed above, fill them with furniture wax of a suitable shade and polish them.
After drilling out the joint and cleaning the chipboard from crumbling parts, you can fill it with a two-component epoxy compound or glue mixed with shavings. After hardening, you can screw in the fasteners.

Restoration of chipboard facades

The front part of furniture made of chipboard can rarely be restored. Similar procedures for filling scratches, cracks and dents with furniture wax turn out to be ineffective. Because light hits the surface differently, it is impossible to make defects less noticeable. Usually they resort not to the restoration of damaged chipboard facades, but to the actual renovation of the entire facade part of the furniture:

They are covered with wallpaper or covered with artificial leather. To do this, it is recommended to remove the facades and twist the handles - this will make it neater.
They use photo printing, hand painting and decoupage techniques. The pattern can be applied exactly to the location of the defect, and not over the entire surface of the chipboard facade.
The facade is decorated with self-adhesive moldings and various overlays. You can find out more about furniture decor here.
Glue strips of melamine tape of a similar or contrasting shade. If you think through the concept, this disguise of damage can look like a design technique.

Repair of minor damage

Typically, this type of work such as restoration of an artificial countertop involves an initial inspection by a master, followed by procedures for restoring the countertop.

Repair of countertops made of artificial stone is carried out both on site, if the damage is minor, and with transportation to a production facility, if significant intervention is required.

When shallow scratches or stains appear on the surface that cannot be removed, a grinding machine with a fine abrasive wheel will help. Problems such as stains from various chemical detergents and hot burns on the surface, as well as minor scratches, can be removed with your own hands.

Hot pan burn stain removed by sanding

To do this, you will need a polyester compound designed specifically for this purpose. Scratches can be sanded, first with medium, and then with the finest sandpaper. Afterwards it should be polished. Very carefully, slowly and carefully with a soft felt cloth until the original appearance is restored.

Master restorers in this case resort to using a sanding machine with a felt attachment. But when doing DIY repairs, it’s better to use a felt cloth. You need to be careful if the tabletop is made of acrylic with a slight coating of artificial stone. In this case, surface grinding is not performed.

To restore original strength and beauty, work must be performed by qualified specialists. Otherwise, independent intervention in the repair of a surface made of quartz agglomerate may further lead to an increase in the cost of restoration work or to the purchase of a new countertop. Restoring and repairing an artificial countertop is a rather labor-intensive process.