How to bleach jeans white without boiling and without ruining the fabric


Lightening jeans with “Whiteness”

Lightening jeans using “Whiteness” allows you to give the product a worn effect. The procedure is performed by boiling or soaking the pants.

To bleach jeans with “Whiteness” without cooking, you need to soak the fabric with a sponge and leave it for 5 minutes, clean it with a fine brush, and spray it with a spray bottle.

A non-standard option for lightening denim with “Whiteness” without boiling is to clean the pants with a pumice stone, then treat the worn areas with the product.

Important! Using bleach requires the use of protective gloves and working in a ventilated area. If “Whiteness” gets into your eyes, rinse them generously under the tap and go to the hospital. If liquid enters the intestines, call an ambulance, rinse the mouth with boiled water, and take analgesics.

Tips and tricks

The best effect can be achieved by exposing boiling jeans to the classic color blue, light blue. Only blue trousers can make white jeans. In all other cases, only approximate results are possible.

Products that are too thin and elastic are not suitable for cooking.

Don't bleach colored jeans. It is unknown how to react to pigments and medicinal dyes contained in the fabric. But if the desire is irresistible, try treating a small, inconspicuous area first and evaluate the result.

Source

Lightening jeans with hydrogen peroxide

If bleaching jeans with “Whiteness” is not suitable, lightening is done with hydrogen peroxide . You need to add a couple of spoons of the product to the bleaching powder when machine washing.

You can bleach denim at home using peroxide by soaking it and then washing it by hand or machine. To do this, add 3 tbsp to a basin with warm soapy solution (5 l). l. drug. The item is soaked for 2-3 hours. Peroxide will remove yellowness from the fabric.

Partial whitening

When there is no goal to completely change the color of denim, but you still want to refresh the appearance of your favorite trousers, you should use some tricks and give free rein to your imagination. Creativity is always welcome, which is also true in clothing design. The main thing is to know when to stop. Partial whitening of jeans is possible in several ways.

Patterns and drawings

Using a stencil and a bleach solution, a simple pattern is created, for example, stripes, polka dots, hearts.

What you will need:

  • finished stencil;
  • dense backing for fabric of a suitable size;
  • sponge;
  • gloves;
  • solution based on peroxide or chlorine.

How to use:

  • It is better to outline the location of the future pattern in advance;
  • A backing is placed inside the trouser leg to prevent the solution from leaking;
  • the sponge is soaked in bleach and applied to the desired area using a stencil;
  • the duration of action of the solution depends on its concentration and the desired intensity of the pattern;
  • The trousers are rinsed in clean water and dried.

Gradient

An interesting effect is obtained if the trousers are consistently kept in bleach with boiling water. The jeans are suspended above the container and lowered in a vertical position to the desired transition level. By gradually lifting the trousers out of the solution at regular intervals, you can get the effect of transitioning from blue to light blue to white.

Whitening areas of the product

This method is similar to applying stencil designs, only in this case there are no frames, only imagination!

Using a free-form sponge, apply the bleach to the desired areas. For example, to simulate abrasions, the liquid is distributed in smooth movements along the trouser leg from top to bottom.

Tip: for a visual effect of volume, highlight areas on the hips and buttocks.

To achieve the popular tie-dye effect, the item is tied into a tight knot and placed in a solution with bleach. This method of soaking helps to achieve an unusual visual effect in the form of contrasting blurry spots. Their distribution throughout the fabric directly depends on how the knot was tied.

Lighten jeans with lemon juice

Another effective option is lemon juice. To prepare a bleaching agent, take 1 tbsp per liter of liquid. l. juice or 1 tsp. acids.

Be sure to read:

How to wash stained white or colored clothes, how to fix them

The trousers are left to soak for about 1 hour. If the tone has not changed, then keep it longer, then rinse and dry. If you want to experiment, you can draw a clarified picture with juice and trace a stencil.

Note! Wet fabric darkens, this prevents accurate determination of the shade; it is better to evaluate the color of the product when it dries.

How will we bleach?

Depending on the purpose - contamination, general or partial bleaching - gins can be bleached using various means.

Let's look at the main types of bleaches used in everyday life and their features:


  1. Baking soda. Used as a weak neutral agent. It can whiten jeans made of thin fabric - mainly pants and shorts. Optimal use is to add during washing. Soda is mixed with water at the rate of 1 tablespoon per liter. The powder can be added directly to the loading chamber and mixed with detergent.


  2. Hydrogen peroxide. Allows you to whiten jeans a couple of tones. Suitable for jackets and sleeveless vests. Effectively copes with yellow inclusions and rusty stains. The method requires a 5% solution. For 10 liters of water, take 3 tablespoons of peroxide. Things are soaked for about half an hour. Alternatively, the product can be mixed with washing powder and the clothes can be washed in a machine.


  3. Citric acid (lemon juice). The simplest, cheapest, effective and safe means to whiten any jeans. For the method, a solution is prepared - 5 grams of acid in powder form (or the juice of half a lemon) per 1 liter of water. Clothes are soaked for at least 1 hour. In the future, the exposure time may be extended depending on the result.


  4. Domestos. The professional product contains many effective whitening components. Can greatly whiten any model of jeans. Used at the rate of one glass per 5–7 liters of water. The time it takes for the fabric to clear after soaking is controlled by the user. After removing the items, you need to rinse them well and wash them with conditioner to get rid of the chlorine smell.


  5. Potassium permanganate. Potassium permanganate is a chemical bleach. For every kilogram of dry clothing you will need about 20–30 grams of potassium permanganate crystals. Clothes should be soaked in the prepared solution for a period of 0.5-1 hour. After removal, items must be washed thoroughly.


  6. Bleach (white). An inexpensive, common remedy can effectively whiten even black jeans. Bleach tablets are diluted in water in an enamel container. It is necessary to stir until completely dissolved. Then put the clothes in it, heat it, bring to a boil and boil with regular stirring for about 15 minutes. After this, remove the items and rinse thoroughly.


  7. Ammonia. A small part of turpentine must be added to a weakly ammonia solution. Fill with water to the required volume. Clothes should be soaked for several hours. Afterwards it is washed and rinsed generously.


  8. Hydroperite. Three tablets per set of clothes. Dissolves in a minimal amount of water. The item is soaked for a short time and then washed in the same solution. Afterwards, rinse thoroughly with water.

Household chemicals

You can whiten jeans at home with Domestos , Duckling, or others. You should take 1 glass of the product per 3 liters of water. To obtain white shades, soaking time may be required. If you are not satisfied with the result the first time, the procedure can be repeated.

Another way to make fabric lighter is to use bleach. The bleaching procedure is the same as when working with “Belizna”.

Topicals

Since white jeans are gaining more and more popularity, let's try bleaching dark ones. This color goes well with any outfit. There are many ways, for example, a special whiteness product, as well as Domestos, soda, lemon juice, hydrogen peroxide, etc. Some of this should definitely be in your home. Choose the method that is most suitable for you. All products have proven themselves to be effective bleaches. But to get beautiful white jeans, you need to follow the instructions exactly.

In addition to the above, there are special paints, but they are expensive and therefore not profitable. While it's still better than buying new pants, it can remove stains or yellowing from old items

Whatever method you use, it is important to understand that if the fabric structure itself is damaged, then it is unlikely that the item will be saved

How to completely lighten jeans, “boil” them?

The digestion process includes preparation, cooking and finishing.

To carry out the procedure at home, you need to prepare:

  • iron container 10 l,
  • light non-dying threads, elastic bands,
  • clothespins or clips,
  • 1 cup bleach
  • mixing tool,
  • protective gloves.

7-8 liters of water are poured into the container and put on fire. Bleach is added to the hot liquid, brought to a boil, and the item is placed. After half an hour, the trousers are taken out and sent to the wash.

The procedure allows you to lighten the item and get a unique pattern:

  • to get vertical stripes, the item is pulled together in several places with a tight elastic band,
  • large spots or wide stripes can be obtained if the legs are twisted and secured with clips,
  • thin strips are formed with very tight twists,
  • To make a star pattern, secure the pant legs with clothespins.

Be sure to read:

How to quickly and correctly wash white socks from dirt by hand and in a washing machine

During work, you need to control that the pants do not float up. They must be immersed in liquid carefully so as not to damage the twists.

After cooking, the product is rinsed well in warm water, then again in cold water. To remove the smell, wash the item in a machine with added conditioner and dry it outside.

If the resulting color is darker than desired, you can repeat the procedure. As a result of the procedure, the threads on the seams may turn white and will stand out against the background of the product.

Under the influence of aggressive substances, the fabric becomes thinner, so you should not boil thin, delicate denim.

Advice! To partially lighten an item, only the upper or lower part of the item is placed in the basin. If they want to create a gradient, the pants are soaked with a sponge using different concentrations of bleaches. If you have old jeans in your wardrobe, you can practice on them.

Features of bleaching depending on the color of jeans

The result is influenced by the original color of the jeans. The rule here is: the more intensely the fabric is dyed, the more aggressive the bleach should be used.

But you shouldn’t expect drastic changes even with the use of pure bleach. For example, you cannot get snow-white jeans from originally black ones. After some simple manipulations, you will end up with either a light gray color or hopelessly damaged trousers (remember that bleach destroys even such dense fabric as denim).

Dark

No matter how hard you try, you won’t be able to turn black denim trousers into crisp white ones without damaging the structure of the fabric. But it is possible to achieve the “varenka” effect, gray color, and scuffed effect with the help of strong bleaches without difficulty.

Chlorine-containing bleaches and concentrates are used to change the appearance of black jeans.

  • A short rinse in a weak chlorine solution will change the color by 1-2 shades.
  • Many hours of soaking lightens the item to a light gray color.
  • Boiling in water with the addition of White gives a characteristic color effect.
  • Pre-twisting and pinching local areas with clothespins and elastic bands creates the effect of uneven lightening.

Blue

Attempts to make blue jeans blue or even white are likely to be successful if the pigment is well leached from the fibers. Any method will do.

White

Light and white jeans are usually bleached when there is a loss of brightness, a change in shade purity, or to restore color uniformity and eliminate yellowness.

Chlorine-containing products help, but only once. It is undesirable to overuse such procedures - the jeans will become thinner and a “washed out” grayish tint will appear.

Using oxygen bleach or peroxide-based products can help remove yellowing from denim pants.

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]