27 ways to QUICKLY clean your hood from grease at home

The task of a kitchen hood is to remove fumes, unpleasant odors, smoke and fumes that arise during the cooking process. Thanks to the ventilation function, the air in the room is regularly updated, providing a favorable microclimate.

Over time, the filtering ventilation grilles of the hood become covered with grease and cease to cope with their tasks. Find out how to properly and effectively clean grease from hood grates here.

Why do you need to clean the hood in the kitchen?

Keeping your hood clean is necessary to avoid:

reducing the efficiency of air purification, since a clogged filter catches grease, steam, smoke and dirt worse until it stops working completely;
increased load on the engine, which leads not only to an increased risk of breakdown, but also to an increased possibility of fire;
increasing the noise level produced by a motor operating with filters filled with dirt;
deterioration in the appearance of the device, since grease marks appear not only on the internal filters, but also on the external surfaces;
complete failure of equipment.

Conclusions and useful video on the topic

Restoring the throughput and appearance of the air intake grille using soda ash:

Cleaning the hood grille using a pipe cleaner:

The variety of methods and cleaning agents allows you to choose the best option for the situation. In order not to resort to radical methods, routine maintenance should be carried out without waiting for hardened layers of fat to form.

Do you have your own experience in cleaning kitchen hood filters from grease deposits? Perhaps you want to share your own methods for solving this problem or ask questions about the topic of the article? Please leave comments in the block below.

How often should you clean your hood?

The frequency of cleaning depends on the frequency of use of the equipment. So, if you turn it on frequently, you should clean the filters weekly, and if you turn it on rarely, once every couple of months. On average, monthly cleaning is recommended. This will both facilitate the cleaning process and increase the period of use of the device, which may become faulty if it is heavily soiled. Once every few years, it is worthwhile to completely disassemble the hood and lubricate the motor.

Complete disassembly

It is worth considering not only the frequency of cooking, but also the presence of tobacco smoke when smoking in the kitchen. A number of modern models are equipped with sensors that periodically signal the need for cleaning. With standard parameters, this reminder appears after 60 hours of operation of the equipment, but the sensor can be configured for an individual period.

Why you need to clean your kitchen hood and how often you should do this procedure

A ventilation hood should be present in every home kitchen.
Mount it above a gas or electric stove. The device plays an important function indoors by drawing harmful fumes and odors from cooking outside. A properly installed and configured hood can even remove a gas leak from the stove to the street if something accidentally escapes. However, in order for the device to work properly for a long time, it is necessary to ensure its cleanliness. Regularly wash filters, grilles, controls and housing to remove drops of oil and grease. Unfortunately, modern women do not always have enough time for this, so they are faced with a problem when they try to clean the kitchen hood. This happens because a large layer of fat accumulates on the filters and motor blades over a long period of time, on which dust settles. Such contamination is difficult to remove, so it is recommended to thoroughly wash all components of the electrical appliance twice a month.

Preparing the hood for cleaning

The cleaning process includes its partial disassembly, which is described in detail in the instructions for your equipment. The preparation looks like this:

De-energizing the device.
Removing the grease filter. This often requires releasing the top panel latches. The filter carefully catches droplets of grease, but requires periodic cleaning. It can be steel, aluminum or disposable. The last option is typical for compact hoods. This filter is made from acrylic, paper, non-woven fabric or padding polyester, so it cannot be exposed to moisture or washed, but should be replaced regularly.
Removing the carbon filter. Circulation-type devices are equipped with it, and the efficiency of the air purification process depends on it. This filter cannot be washed and must be changed every six months.

For flow-type hoods that remove air from the apartment, additional cleaning of the ventilation duct is required.

When working, you should adhere to some rules to avoid damage to equipment:

it is impossible to clean the replaceable grease trap, as it is irreparably damaged when it gets wet;
Do not boil parts made of plastic;
Do not use metal mesh, hard brushes or abrasives on the external surfaces of the hood, as this will lead to scratches;
Aluminum filters should not be cleaned frequently using alkaline agents, as they gradually corrode the metal;
During cleaning, it is necessary to ensure good ventilation of the room in order to speed up the process of getting rid of toxic substances and the specific smell of fatty deposits.

Cleaning the filter with ready-made compounds

Professionals know how to clean grease from a hood. Special compositions for cleaning the filter and surface of the hood will help you quickly and safely restore order in the kitchen. The list of fat solvents is as follows:

A cleaning product called “Selena” has universal properties. The liquid is based on caustic soda and is packaged in a container with a sprayer. The composition is applied to the contaminated surface and left for 15 or 20 minutes, after which the fat is removed with warm water.
Another remedy is Milam Anti-Fat gel. It is also sold as a spray. Using a sponge, rub the gel into the surface of the grate and after 5 minutes of exposure, wash it off along with the fat under running water.
Unicum grease remover is recognized as a powerful tool. It eats away layers of dirt instantly. To do this, spray the composition onto the mesh and after 20 seconds it is washed with a damp sponge under running warm water.
The surface of the filter is cleaned well by Amway oven cleaner. The gel-like consistency saturates the surface of the mesh well, filling all the recesses. This product comes with a brush, which is used to distribute it over the hood filter.

Cleaning coins until they shine at home

The latest cleaner is very convenient to use; it also allows you to lubricate the vertical surfaces of the electrical appliance itself. The thick consistency lingers well, so this product is successfully used to clean old hoods where the filter cannot be removed. To clean the hood of grease using this product, leave the gel to act for 5 or 10 minutes, after which the composition is washed off along with the stubborn grease under running water.

After cleaning the mesh with household chemicals, it is recommended to do the procedure again and leave to dry. Then, without washing off the product, the grille is put back in place and begins to operate as usual. Next time, cleaning will be less problematic as the grease will settle on the cleaning composition.

How to CLEAN the hood grate from grease in the kitchen at home?

It is recommended to wash the hood grille monthly with mild neutral products. With minor contamination, the fat dissolves easily in hot water with the addition of dishwashing liquid. Old sebaceous accumulations are more difficult to remove; the following radical cleaning methods will be needed:

Clean with dishwashing detergent

Cleaning with detergent
This method is suitable for regular cleaning of the hood, when grease has not penetrated into the filter holes and has not hardened, acquiring a dark color and sticky consistency. The cleaning process is as follows:

place the meshes in a container of a suitable size and apply a liquid product to them;
pour boiling water into the container, completely covering the filters, and leave for half an hour;
remove the filters and clean them with a stiff brush or metal sponge to remove softened fat;
in case of incomplete cleansing, repeat the procedure, but no more than once, since further repetition will not have an effect and a more powerful remedy is needed;
rinse the filters with warm water;
Dry the elements completely and install them in place.

If the grates are made of aluminum, they should not be left in water for a long time.

Clean with soda

Cleaning with soda
This option is suitable for removing light and medium level dirt. Soda ash is more effective than baking soda. The cleaning procedure is as follows:

Fill a wide container with water and place on fire;
gradually add soda (at the rate of 10 g per 1 liter) as the water heats up, stirring;
after the solution boils, dip the nets into it and boil them for half an hour;
after boiling, remove fat with a stiff brush and rinse the filters.

If there is no container capable of containing the entire filter, you can boil its sides one by one. The method is optimal for steel gratings, since prolonged contact with a soda solution can dull aluminum.

Clean with soap and soda solution

Cleaning with a soap and soda solution
This method allows you to increase the effectiveness of the soap solution recommended in the hood manual as the most gentle. It turns out to be quite effective in most situations, excluding particularly advanced cases when the equipment has not been cleaned for several years. You can clean your home hood in the following way:

pour hot water into the container;
add 60 g of soda and 20 ml of detergent, mix;
place the grids in the solution for 15-20 minutes;
Clean the grates with a stiff brush and rinse.

To increase efficiency, you can boil the grids for ten minutes. In advanced situations, water with filters should be boiled and left on low heat for a couple of hours. This option is only valid for steel models.

Clean with laundry soap and soda

Cleaning with laundry soap and soda
A solution of 72% laundry soap and baking soda allows you to remove even stubborn traces of grease on the hood. The cleaning procedure is as follows:

Add 10 g of soap, chopped or grated, and 5 g of soda to 1 liter of hot water, stir until dissolved;
lower the grates into the solution and boil for 15 minutes, if there are stains of old fat - half an hour;
Wipe off softened dirt with a brush, rinse the filter with water.

To speed up the cleansing process, the solution can be supplemented with a small amount of grated apple to release the acids present in it. In case of minor contamination, only laundry soap is used, 50 g of which is crushed and dissolved in three liters of water. The filters are soaked in the solution for 30 minutes.

Cleanse with a universal stone

Cleaning with a universal stone
The universal stone is a paste-like detergent designed to remove stubborn dirt of any origin from various types of surfaces. It contains clay, glycerin, green and coconut soap flakes. These components first soften the fatty traces in the hood and then dissolve them. Use the hood cleaner as follows:

cover the filters with stone using a rag;
leave the grids for 15-20 minutes;
Remove any remaining dirt with a brush and rinse under water.

Clean with ammonia

Cleaning with ammonia
To clean the hood mesh at home, ammonia is suitable for removing fat that has not yet penetrated into the filter. Before starting work, it is necessary to ensure full ventilation of the room, and carry out the manipulations themselves while protecting the respiratory tract, for example, in a respirator. The cleansing process is as follows:

dissolve 150 ml of ammonia in four liters of water at a temperature of about 50°C;
place in the mesh solution for 3-4 hours;
Clean the grates with a brush and rinse with warm water.

The grates can also be boiled in a solution of ammonia. To do this, they should be placed for an hour in a boiling mixture of 100 ml of alcohol and five liters of water.

Clean with vinegar

Cleaning with vinegar
For minor stains, 9% table vinegar is suitable; for more serious cases of hood contamination, it is better to use 70% acetic acid. The latter can be diluted with water in equal proportions for moderate contamination. Work should be carried out wearing thick gloves and ensuring good ventilation. The procedure for cleaning a kitchen hood is as follows:

moisten a soft sponge in a vinegar solution and wipe all areas of contamination;
in case of more persistent marks, place the grids in a container, fill with solution and leave for 15 minutes;
Clean the grate with a brush and rinse.

Clean with lemon juice

Cleaning with lemon juice
Citric acid turns out to be almost as effective as an acetic acid solution. You can use concentrate or fresh lemons. To clean the grille of a kitchen hood, the method is used as follows:

wipe the dirty filter with halves of 1-2 lemons or a solution of citric acid (30 g of powder per liter of water);
leave the product applied for half an hour, for serious contamination - overnight;
Clean the filters, rinse with running water and dry thoroughly.

Clean with a combination product

Combined cleaning product
To quickly clean your hood at home, you can combine several effective products to enhance their effectiveness. The product includes:

40 g of baking soda or soda ash;
40 g citric acid powder;
40 g table salt;
100 ml of ammonia;
100 ml hydrogen peroxide;
100 ml silicate glue;
20 ml 9% vinegar;
20 ml ethanol;
200 g of crushed 72% laundry soap.

All these components dissolve in ten liters of water when heated. The filters must be placed in a warm solution for a couple of hours, after which the soaked fat can be removed with minimal effort.

Clean with cleaning paste

Cleaning with a cleaning paste
Similar to the previous method, the product allows you to enhance the effect of individual components, and therefore can be used against serious contamination of the gas hood. The kitchen hood cleaning paste contains:

20 g of crushed laundry soap;
10 g table salt;
10 ml 9% vinegar;
10 ml boiling water.

The ingredients must be carefully mixed until they form a paste. The resulting composition should be rubbed into the surface of the mesh using a sponge and left for 20 minutes. After this, the grates are washed with warm water.

Clean with combined acid

Washing with combined acid
The combined action of three fairly powerful cleaners, two of which include organic acids, is suitable for advanced cases. The composition of the detergent is as follows:

0.5 liters of warm water;
100 ml 9% vinegar;
15 g citric acid powder;
50 ml of ammonia.

All ingredients must be thoroughly mixed, and the reagents should be added to the water. The hood filters must be placed in the solution for 15 minutes, then cleaned with a brush or sponge and rinsed thoroughly with water.

Clean with mustard powder

Cleaning with mustard powder
A fairly old folk method for cleaning a hood, but nevertheless effective. The cleaning procedure is as follows:

add a mixture of 35 g of mustard powder and 10 ml of shampoo to a hot solution of water and 9% vinegar (1 to 1), stir until the consistency of a liquid slurry;
moisten the filters with warm water;
treat the grates with the mixture on both sides;
wrap the grates in a towel moistened with hot water and leave for half an hour;
Clean off softened dirt with a stiff brush and rinse the filters.

Clean with mustard and detergent

Detergent and mustard washing powder
Mustard and dish soap, complementing each other, enhance the degreasing effect. The procedure for cleaning the hood at home is as follows:

dilute mustard powder in hot water and stir until pasty;
add a small amount of liquid soap to the mixture and stir until foamy;
apply the product to the filters for 30 minutes;
Clean the mesh with a stiff brush and rinse under water.

You can enhance the effect of the mixture by supplementing it with a substance that has an alkaline reaction. The most affordable option is baking soda, which must be added to the mustard powder before the detergent.

Cleanse with carbonated drinks

Cleaning with Coca-Cola
Carbonated drinks such as Coca-Cola and Pepsi contain phosphoric acid, which makes them suitable for minor staining of the hood. They need to be poured into the grids and left for a long period (at least a day). This will make the filters easier to clean.

Clear white

Cleaning with bleach and a toothbrush White
bleach is mainly used to clean the hood body, but it can also remove shallow dirt from the filters. The procedure for cleaning the hood in an apartment is as follows:

wet the grates with warm water;
carefully apply the whiteness using a toothbrush and leave for 15 minutes;
remove grease with a stiff brush and wash the filters.

Clean with pipe cleaner

Cleaning with mole
If filter contamination is more than one year old, then it eats into the metal so firmly that not even all specialized compounds can remove it, let alone homemade ones. In such a situation, it is permissible to use products designed to clear sewer pipes from blockages, such as “Mole”. They eliminate plaque due to the sodium hydroxide included in the composition, that is, cleansing occurs under the influence of alkali, rather than acid. You should work with them extremely carefully, using thick rubber gloves and avoiding contact with the skin. The process of cleaning the hood with mole:

completely cover filters placed in a container with the product, dissolving it in boiling water if necessary (for granules and powder);
leave the grates for ten minutes, during which the grease stains will dissolve, which will lead to the formation of dirty foam;
Rinse the filters thoroughly with warm water.

This method can be used only in extreme cases, when other methods are powerless. This is a very aggressive chemical, and its use more than a couple of times during the entire operation of the equipment is highly not recommended. It is worth considering that if the instructions for preparing the concentrate solution and the application time are not followed, the reagents can cause deformation of metal parts. Particular care should be taken with aluminum filters.

Clean with a steam generator

Steam cleaning
If you have a steam generator, its use is optimal, since it allows you not only to clean heavily soiled hoods, but also to disinfect the surface. The device supplies steam at a temperature of 150°C, due to which all grease stains melt. After treating the grille, simply rub it with a sponge and liquid soap and rinse with running water.

Clean the hood grate in the dishwasher

Washing in the dishwasher
This is the easiest method that will be effective for periodically cleaning the screens at home. You just need to load them into the machine and wait for the washing process to complete. However, the technique is not designed to remove serious stains, and old stuck-on grease will remain on the grate even after several cycles. At the same time, regular monthly washing in the car will allow you not to use other products as unnecessary.

How to disassemble the device?

In the instructions for the unit, the manufacturer indicates which parts are removable/dismountable and includes a diagram of the device. Based on the diagram, even a woman can disassemble it.

If there are no instructions, you should use the standard algorithm, it may also work:

The device is disconnected from the power supply.
Unsnap the latches and remove the top cover of the case.
Remove the filter.
Remove the tube that connects to the vent.
Disconnect all removable parts and take out the air filter.

Important! Fixed elements are cleaned in assembled form, trying to wring out the rag as much as possible so that water does not get inside the case.

Dismountable parts are soaked in a large container with soapy water for a couple of hours . After the allotted time, rub intensively with the hard side of a kitchen sponge and wash under warm running water.

The soap solution is prepared from dishwashing detergent or hand washing powder (it produces more foam).

Store-bought kitchen hood cleaning products

Special cleaning products
The fastest and most effective way to clean your hood from grease at home is to use special products that dissolve grease deposits. This does not have to be a substance for extracting; a composition for the oven or microwave oven is also suitable. The most popular products in this category are:

Spray “1 minute” produced by Sanita

This is a fast-acting product, the active components of which corrode plaque, grease stains and other contaminants. The spray is universal, but is not designed for use on enameled, varnished, painted and aluminum surfaces.

Spray and gel Cilit Bang “Anti-Fat + Radiance”

This Polish product is effective for removing drops of grease and carbon stains, but is not intended for removing hard carbon deposits, lime and old rust. Ideal for regular maintenance. The preparations are created on the basis of surfactants without the use of abrasives, which ensures a gentle effect on contaminants.

Anti-Fat spray produced by Cinderella

The active ingredient in the spray is soda, which makes the process of cleaning the hood not very fast, but completely safe. The product ensures gentle cleaning of stubborn stains on various surfaces. It has an overly liquid consistency, which leads to rapid consumption.

"Shumanit" from the Israeli Baga

This is a professional toxic product with a pungent specific odor. It is characterized by fast action and effective removal of even old contaminants. It does not contain abrasives and has an antibacterial effect. Not suitable for painted or aluminum surfaces.

Gel "Synergetic" of German origin

Designed to remove soot, grease, carbon deposits, scale, oil stains and rust. This is a natural preparation for hoods, ovens, stoves, baking trays and frying pans, does not contain aggressive chemicals and is absolutely biodegradable. Not suitable for surfaces made of copper and its alloys, brass and aluminum.

Warning

Gels are most often concentrates, and therefore are suitable for the most old and complex stains. All these substances have an aggressive effect, and therefore work with them should be carried out in a respirator, thick rubber gloves and with good ventilation. The products are used according to the instructions, but usually they need to be applied to the hood grids and left for a while, then walk over the surface with a sponge or brush. Manufacturers of some particularly caustic products recommend placing coated filters in a bag to prevent the spread of odor. After cleaning, they must be rinsed thoroughly using warm water.

The only drawback of the method is the relatively high cost of these products, however, on the modern market you can find substances in different price segments. When choosing a drug, you should carefully study the label, since some of them are not applicable to aluminum meshes.

Cleaning stains using a steam generator and dishwasher

An excellent and quick way to clean surfaces from grease is to use a steam generator. By using this device, even with heavy grease stains, you will not have to “boil” the parts in a pan, and the entire procedure will only take a few minutes.

Steam generators are indispensable when dealing with old dirt

This is interesting! When using a steam generator, the steam temperature is about 145 degrees, so upon completion of the cleaning process, all dirt is quickly removed with a sponge, even without detergent.

Among the negative aspects of this method, the high cost of the device should be noted. However, it is recommended to purchase it if you like to do general cleaning, because it can be used to wash not only the hood, but also the floor, windows, plumbing fixtures and other household items. In addition, the use of a steam generator allows not only to remove contaminants, but also pathogens.

Individual parts of the hood can be quickly washed in the dishwasher by placing them in the compartment for large dishes. It is recommended to carry out this procedure three times a month.

After steam treatment, all that remains is to wipe the surface with a cloth

Prices for popular steam cleaner models

Handheld steam cleaner

How to quickly clean the hood body?

Typically, the outer surface of the hood is wiped much more often than the internal elements, and therefore it is easier to clean. Plaque and small drops of grease can be removed using liquid dish soap. With a foamy product placed on a sponge, it is enough to wipe the dome. To increase efficiency and require less effort, the product can be left on the surface for ten minutes, and then removed with a damp cloth and wiped dry. To make the case shine and effectively dissolve plaque, you can use glass cleaning liquid.

Cleaning the case

If the hood body is not cleaned regularly and the dirt has become ingrained, the following methods can be used:

Specialized products for cleaning hoods, ovens or microwave ovens in the form of gel, liquid or spray. Use according to instructions, be sure to wear protective gloves.
A mixture of 100 ml silicate glue, 30 g soda and 10 g washing powder. The components must be dissolved in a quarter liter of hot water and mixed well (can be shaken in a bottle or shaker). The resulting product should be coated on the body and left for 15 minutes, after which the composition should be removed along with any dirt that has come off the body. The mixture is effective even in the case of ingrained fat.
Lemon. Rub the surface of the case with half of it and leave for a couple of minutes, then remove the juice using a damp sponge.

To avoid scratches, it is better not to use metal brushes or abrasives. If there is serious contamination, you should use a plastic scraper. It is also not recommended to apply alcohol-based products and solvents, as they cause tarnishing of the stainless steel or varnished coating.

The inner surface of the hood is cleaned with similar means. In case of particularly severe contamination, you can use a product designed for cleaning pipes.

Preparatory work before removing dirt on home hoods

Before you start processing the device and cleaning its parts, be sure to read this article to the end, because you must clearly understand what actions should be taken and take into account mistakes that could turn out disastrous. Let's return to the preparatory process:

Do not leave the hood on when washing, you may get an electric shock.

Prepare the necessary means and the electrical appliance itself for contact with water. To do this, be sure to unplug it from the outlet. Remove parts that are attached mechanically (decorative glass, grilles, control knobs).
The pipe going through the wall to the street also requires treatment; we remove it according to the instructions for the device. If you can’t do it yourself, ask family members or contact a specialist.
Take out the air filter, it also needs cleaning. If there are loose parts on it, remove them, but remember the sequence of actions for further installation.
Do not try to pull the hood body out of the wall; it can be washed right on the spot using soap, degreasers or folk recipes, but more on that below.
Determine the degree of contamination of the household appliance and choose the desired method for removing greasy deposits. Perhaps a regular soap solution will help you, or the use of household chemicals will save you.

If some parts cannot be opened (often filters), do not push your luck, most likely they can only be replaced

How to clean grease from hood buttons?

Quite a large amount of fat accumulates on the hood buttons, since they are the most frequently contacted by overweight fingers during cooking.

Cleaning the buttons

The following means are suitable for its removal:

anise drops;
nail polish remover with acetone;
ammonia;
hydrogen peroxide.

These substances are applied to ear sticks or a cotton pad, which are used to wipe the buttons. To enhance the effect when removing old greasy marks, you can use a toothbrush. However, it should be used carefully to prevent scratches.

Pipe cleaner

If the hood has not been cleaned for a long time, it will be much more difficult to remove stubborn grease, since during the operation of the hood in the kitchen, the dirt becomes compacted and becomes hard. Often simple ways to get rid of dirt using detergents and boiling are powerless. Therefore, there is a need to use more aggressive compounds .
Dense layers of fat can be removed by a drain and sewer pipe cleaner. Before using such products, you must make sure that the kitchen sink is made of stainless material, since this product can damage other types of materials.

First, before using a cleaning product , you should study the instructions for it. The manufacturer advises preparing the solution in the kitchen sink, then immersing the hood filter in it. Immediately after this last action, a violent chemical reaction should occur. Fatty deposits will simply explode and separate from the mesh. Wait for everything to calm down and drain the liquid.

If the sink cannot be used, clean the mesh in the tray . After the chemical reaction has stopped, carefully pour the liquid down the drain.

Such aggressive cleaning should only be carried out in exceptional cases. Before using this method, it is better to try to clean the grill using other, less radical methods. To do this, you need to try to prevent the formation of large fat deposits, and it is better to clean it once every two or three months with gentle products.

Ways to get rid of large amounts of dust in the apartment

How to clean the hood duct?

Periodic cleaning of the air duct is necessary for flow-through hoods. You can determine that the element is contaminated by a decrease in draft. However, even with normal draft, the air duct should be inspected and cleaned annually.

Air duct cleaning

Depending on the type of this element, cleaning methods differ:

Plastic blowers with round or square cross-section . They are formed from several parts, which allows them to be quickly disassembled. Cleaning is easy and dirt can be removed by simply washing with soapy water followed by rinsing.
Round Corrugated Aluminum Blowers . Such models are more common due to their low cost. They are much more difficult to clean, since drops of fat accumulate in the folds of the corrugation. It is usually easier to completely replace the pipe than to clean it. Only using a steam generator or a pipe cleaner will be effective. After using the latter, the blower must be rinsed generously with warm running water.

Cleaning the grate by boiling

To clean the hood in the kitchen, if the above methods do not help, use a more effective method .
Pour water into a large saucepan (5 liters) and bring it to a boil, then add 2 large spoons of baking soda and half a piece of laundry soap, previously grated with a grater. For this procedure, you need to choose solid brown soap, since white and liquid analogues do not have the necessary properties. Place the filter in boiling water and boil it for 5 to 10 minutes. Then turn off the fire and, without removing the grate from the water, wait for the solution to cool. After this, the mesh is removed and the remaining fat is removed with a brush.

If the entire filter does not fit into the pan, it is processed in parts. You will need to boil one side first, then the other.

How to clean the hood motor?

The engine should be cleaned no more than once every couple of years. You must first carefully read the manual for the hood in order to study the location and method of fastening the parts. In general, the filters are first removed, then the mounting bolts are unscrewed and the motor and fan are removed. They are fastened together and should be separated.

Cleaning the fan

To clean the fan impeller from grease, you can place it in a soapy solution for several hours. Afterwards, the soaked fat will be easy to remove. The motor must not be cleaned or washed. Simply wipe it gently with a damp sponge, avoiding contact with the wires. This is enough to remove accumulated dirt and dust. The engine should be lubricated before reinstallation.

There are many ways to remove serious contaminants and keep your hood clean. The optimal maintenance strategy is regular cleaning, which not only requires less effort, but also extends the life of the equipment.

Useful tips

When cleaning the non-removable parts of the hood, cover the surfaces underneath with film.
Regularly wipe accessible parts of the hood to prevent large deposits of grease.
Vinegar, citric acid, dishwashing detergent and laundry soap are suitable for cleaning stainless steel coatings.
Carry out preventive cleaning with dismantling of the structure at least once every two months.
A steam generator will help remove plaque without using chemicals.

Advice! To prevent the formation of a hard layer of fat on the hood body, minimize idle operation of the stove.

Keep your device clean - and it will delight you with long-term and trouble-free operation.

More radical treatments

Cleaning with cleaning agents
A very dirty hood can be cleaned only with aggressive agents. In this case, the mesh and filters must be washed with a special composition for cleaning pipes. All work must be carried out as quickly as possible so that the chemical composition does not damage the structural elements of the kitchen hood. The product on the surface immediately begins to dissolve stubborn fat. After using such a concentrate, all products must be rinsed very well under running water until completely clean.

The use of saline solution is also often practiced. To prepare the composition you need to use table salt and water. Bring water to a boil, then soak all parts. Additionally, the grill and other parts can be washed with a solution of citric acid. This will give high-quality results.