The completion of renovations is not a reason to relax. Now you need to put all surfaces in order. My problem was related to the solution to the question of how to clean an iron door from stains from whitewash, plaster and putty. After all, it was she who suffered due to my inexperience (after all, it was possible to avoid contamination by hanging temporary artificial curtains on the canvas). I'll tell you about several methods that I used to clean metal coating.
Source goroddverei.rf
Features of the structure
Before you start putting the door leaf in order, you need to keep in mind that only gentle products should be used. This is due to the fact that abrasives have a very negative effect on coatings, destroying its protective layer.
If you damage the surface coating, you may lose some of the functions that the structure is capable of performing, for example, sound insulation. Moreover, if the coating is not damaged, defects in the form of “saffron milk caps” may appear and the aesthetic appearance will be lost.
A universal method for cleaning metal
Are you afraid of worsening the condition of the door?
A good door costs at least 10,000 rubles and not everyone wants to take risks, so using acetone or other substances is highly undesirable. But a door with a lot of stains or graffiti will not please homeowners. If you are nervous and do not know how to clean the door, then contact the specialists. For example, to the company where you ordered the model. Specialists will inspect the door covering, take into account all the nuances, and carry out cleaning. This is a completely safe method, although you will have to pay a small amount.
zamokzamkov.ru
How to clean a metal door: analysis of the best methods
After the repair work, I was left with stains on the canvas not only from harmless lime, but also from the polyurethane foam, which I tried to remove before it hardened on the surface. I will analyze each type of contamination and its cleaning method in order.
Source dveri365.house
Stains from stuck polyurethane foam
Polyurethane foam can leave difficult-to-remove stains, which, when you try to wash them with water, are accompanied by the formation of streaks. To remove such things, I was guided by the following algorithm of actions:
- First, using a paint knife, I removed the more pronounced drops of dried foam so that the blade did not touch the door leaf (if it is accidentally scratched, polishing will not be easy).
- Afterwards, the remaining stains on the metal sheet were well soaked using white spirit. If possible, I advise you to attach a cotton swab soaked in solvent to the surface and leave for 15 minutes.
- After the time had passed, I took a dry sponge and wiped off the remaining sodden polyurethane foam. At this stage, I was faced with the appearance of white stains from solvents, I removed them with a rag soaked in water with the addition of vinegar.
You can use heated vegetable oil instead of solvent. It also does a good job of removing stuck remnants of mounting sealant.
Source remontnik.ru
Removing greasy stains from door panels
Grease stains are difficult to remove, and therefore special products are used to remove them.
White spirit is used to clean iron products. This aggressive but effective product with a neutral odor quickly removes greasy stains.
The following products are used to clean wooden doors:
- Potato. The raw vegetable is cut in half, the stain is rubbed, and after 15 minutes the marks are removed with a damp sponge. Potatoes are used to clean polished surfaces.
- Talc. Sprinkle a damp washcloth with powder and wipe the contaminated areas until the stain disappears. Then the door is wiped with a clean, dry cloth.
- Vinegar. To clean stained door panels, generously soak a cotton swab or soft cloth in vinegar and scrub away the stain. When all the moisture has been absorbed into the surface, wipe it with a clean cloth.
- Soapy water. To remove fresh traces of grease, add soap shavings to warm water and then wipe the surface. After this, walk over the treated area with a damp, clean cloth.
- Clay with vinegar. Mix the ingredients until a homogeneous paste is formed, apply the mixture to the oily mark, and let dry. Then the remaining product is washed off with a damp, clean cloth.
Laminated doors are cleaned with alcohol solutions. To do this, water is mixed with alcohol in a ratio of 9:1. A cotton swab dipped in liquid is applied to the stain and left for 5 minutes.
Then wipe the surface with a clean, dry cloth. To clean laminated doors, it is prohibited to use abrasive particles or aggressive solvents containing acids and alkalis.
Beautiful glass items are the hardest to clean from grease stains. This can be done using an aqueous solution of ammonia. To eliminate contaminants, mix ammonia with water in a ratio of 1:10, soak a cloth in the liquid, and rub the contaminated area.
Baking soda can be used to remove traces of grease by applying it to a damp cloth and wiping the stained surface. For this purpose, special cleaners based on ammonia are often used.
Stains from not completely wiped off paint
When performing repairs, drops of paint inevitably fall on the door leaf. They even manage to penetrate under the protective film. If you remove them immediately, stains will still remain. I got rid of them as follows:
- determined the type of solvent contained in the paint (nitrosolvent);
- purchased the corresponding one at a hardware store;
- I soaked an unnecessary cotton rag in it, then soaked the remaining paint on the door leaf with it;
- after that, I wiped off the remaining dirt with the same rag, to obtain shine, I washed the entire canvas first with ordinary clean water, and then removed the remaining stains with a glass liquid containing ammonia.
I do not recommend using preparations with ammonia if the door has a matte surface or is coated with powder coating.
Source olira174.ru
Cleaning iron surfaces
Many people are looking for an answer to the question of when to install doors - before or after renovation? Experts recommend installing the front door after work to minimize the degree of contamination. Although for this purpose the canvas can be covered with plastic film. So, in any case, the decision is yours.
After you have installed the front door, the foam remains on it. The fresh mass can be removed with a spatula, and the residue can be washed off with a solvent (white alcohol, acetone, Profit), or a special polish for polyvinyl chloride (Top Clean, Fenozol, etc.).
In addition, a cleaning agent for hardened foam is used for this purpose.
If the foam has dried, then it is carefully cut off from the surface or removed by grinding. Then the metal door in the contaminated area is washed with any of the above solvents.
Removing whitewash stains on metal doors
You can easily wash an iron entrance door without streaks from whitewash using an effective folk cleaning method. Now I will describe which one I used:
- I took one liter of water and 10 milligrams of kerosene. I thoroughly mixed both components and, using a regular rag, wiped the surface from the outside several times.
- Then I did the same, but with clean water to remove stains, and then simply wiped the metal sheet dry.
- Then I completed the final treatment with polish for the iron entrance doors.
Instead of kerosene, you can use ordinary table vinegar; it leaves virtually no odor, and even if it is present, it will quickly disappear.
Source oooarnuvo.ru
Grease stains and stains after prolonged use
From time to time it becomes necessary to wash the metal entrance door from stains and stains that have formed during use. Such stains are the easiest to remove, but even they cannot always be eliminated without leaving streaks. In the algorithm below I will tell you how to minimize your efforts and time costs in order to get a perfectly clean front door. For laundering, I used the following sequence of actions:
- I filled a bucket with regular hot water and added a few drops of dishwashing detergent and one cap of a chlorine-containing product (regular white or Domestos will do).
- Mix thoroughly until foam forms. Then, moistening a soft kitchen sponge in the prepared solution, he began to scrub off the dirt. In this case, the more foam, the better.
- I had a good walk through all the places that are heavily polluted. Afterwards I replaced the water and carried out a final cleaning of the doors. I did this in order to remove the remaining foam, since later they will dry out and will definitely leave streaks.
This video shows instructions on how to restore the original appearance of a metal door after repair work.
Leatherette
Doors with leatherette trim can be cleaned with plain soapy water if it is just dirt. If the stain is paint or lime, it is better to use gentle products without solid particles.
Cleaning cloth
Soapy water
Probel concentrate
Powder coating
A powder-coated door can be cleaned with steel wool - this is especially good for removing polyurethane foam. Regular dirt can be removed from iron doors using a solvent or acetone; in extreme cases, you can try nail polish remover.
Sponge
Solvent
Acetone
Tree
If the part of the entrance metal door, upholstered with veneer or solid wood, is dirty, it is recommended to treat it with a furniture cleaner. Rough doors cannot be scraped with a knife - the texture of the coating will be damaged.
Cleaning towels
Furniture cleaner
Recommendations
To quickly and efficiently remove limescale stains from metal doors, follow a few tips:
- Before moving on to wet cleaning, clean off old dried stains with a wire brush or sandpaper;
- Wash a door that is not removed from its hinges from top to bottom;
- for work, use material that absorbs moisture well - cotton rags, special napkins or foam sponges;
- prepare two work rags - for wet work and wiping the door dry;
- add a little detergent if you plan to wash the door with water - it helps to better break down fats and prevents chalk particles from returning to the surface.
You can remove limescale stains from any surface, the main thing is to choose the right product.
Detergents
The problem of how to wash doors is easily solved - the choice of product is dictated by the material of the array, the type of decorative inserts and the presence of stains.
Universal industrial cleaning solutions include “Mr. Muscle”, various aerosols and sprays. All of them have a convenient spray bottle, but require good ventilation in the room. Their advantage is their versatility; as a rule, such compositions help to wash glass and get rid of “fingers.”
Care options
Over time, various scratches and cracks appear on the wooden surface, even with careful care. Caring for wooden doors does not take much time, but extends the life of the product. There are a variety of options for caring for such items:
- Cleaning with polishing agents for such surfaces.
- Using special wax or wax pencils in the process of updating or restoring a door.
- Cleaning an item with a regular solution to remove dirt or grease from the wood.
- Possibility of varnishing wooden surfaces.
Polishing products are intended for caring for the wooden surface of doors or furniture. This option will allow you to clean the doors from greasy stains and remove dirt. If you need to cover up cracks or scratches, it is recommended to use wax or varnish.
An excellent option for removing scratches or splinters is wood wax pencils. They are recommended for surface renovation with a certain sequence of work:
- It is recommended to carefully clean the damaged area with fine-grained sandpaper.
- Next, wax is rubbed into this area, which is rubbed on top with a piece of soft cloth. This option will allow you to quickly remove scratches from a wooden door.
How to treat wood and metal surfaces
A wooden door requires meticulous care, as well as high-quality processing during its creation. These factors will help preserve the canvas from moisture, fungus, mold, small pests, and cracking.
Step-by-step processing of wooden canvas from scratch:
- Before starting processing, the door is sanded with fine sandpaper. To eliminate large defects, use a coarse abrasive. In difficult cases, the surface is puttied.
- After preparatory work, it is customary to impregnate the wood with abiotics, which are antifungal and anti-mold agents. They are applied like regular paint with a brush or roller. If the solution is well absorbed, then you can soak the door a second time a day later. The abiotic penetrates deep into the structure and protects the door for many years.
Note: you can putty the door after applying the abiotic.
- When the door is completely dry, it is re-treated with sandpaper.
- Before painting, the canvas is covered with a double layer of primer. Use either wood primer or drying oil. The layers are not applied one after another, you must wait until dry.
- When treating doors with a varnish composition, the coating of primer or drying oil is eliminated and replaced with stain. The number of layers of stain determines how dark the wood will be in the end. The varnish is applied in two layers. The first layer dries for at least 36 hours.
Metal is also a capricious material, and if you haven’t been interested in the condition of your door for a long time, then do it right now. The most common damage to metal is its corrosion, which has many manifestations. For example, corrosion by spots, pitting, through and subfilm, when the destruction of the metal occurs under the coating. How can you treat a surface from rust?
- Clean the surface using wire brushes. This method is suitable for small stains; for thick layers of rust, it is used initially as an auxiliary method. It is not effective, since the degree of cleaning is low and a lot of dust flies in the process.
- Processing with a grinding disc. Suitable for small damaged areas; the surface is processed efficiently if the disc is made of good material. Please note that the disc is erased during the process, and its use requires skill.
- Processing metal with a sandblasting gun. The bottom line is that jets of sand fly out under pressure onto a corrosive surface, which as a result peels off.
- They also use a combination of water and sand, and waterjet processing of metal. Corrosion and previous painting are completely susceptible to strong pressure.
How to wash Wenge colored doors?
A special polishing compound, which is made from the following components, will help clean wenge veneer from stubborn stains:
- ½ melted beeswax granules;
- 1 teaspoon lanolin;
- 4 teaspoons soybean oil;
- 1 teaspoon of turpentine.
12 Jul.
2022 Interesting materials:
What kind of oil should I pour into the shock absorber of an IZH motorcycle? What kind of oil should I pour into the engine of an IZH motorcycle? What place do carrots like? What place did Garipova take at Eurovision? What place in the world in height does Motherland occupy? What is the window seat on a plane? What is the pronoun nobody? What kind of meat is best to use for cutlets? Which meat is better, pork or beef? Which meat is better than duck or goose?
How to clean frosted or glossy glass
During the renovation process, construction waste may fall on glass elements. How and with what to remove dirt from frosted or glossy glass on a door?
The glossy surface of the glass can be washed with regular glass cleaner. For this purpose, what is always on hand in the house - citric acid, vinegar, alcohol solution - is also suitable.
To clean frosted glass, in addition to the usual glass cleaner, you can use a special care composition that carefully removes stains without damaging the glass structure.
Regardless of the material the door is made from, try not to use strong chemicals or abrasives.
Traces of whitewash and lime
Small traces of whitewash can be easily removed by rubbing a little with sandpaper. If the contamination is large in size, the following methods are used:
diluted in water will help get rid of
(20 grams of vinegar per liter of water). Vinegar can be replaced with kerosene (in similar proportions). But remember, due to the strong smell, the method is not suitable for doors installed inside the building.
Traces of whitewash can be removed with a special cleaning agent.
, which is sold in household chemical departments. Before starting to work with solvent, you should make sure that it does not spoil the painted surface of the canvas. Important! Solutions for combating stains and stains from whitewash are diluted in warm water, since the molecules in it are most chaotic, which allows you to knock out chalk particles from the surface.
Plastic polish with silicone and wax for cars
. The method helps with minor divorces. It is recommended to wash off the main contamination with water and detergent. And after drying, apply polish, rubbing until the result is obtained.
Silicone for mold lubrication
. It is used using the same technology as polish.
How to increase service life?
It is recommended to constantly clean a wooden door and inspect the hinges, the functionality of the lock, and so on. Experts advise inspecting simple or folding wooden doors twice a year, which includes performing the following actions:
- The doors are removed from their hinges, lubricated with the necessary products and adjusted as necessary.
- Additionally, it is recommended to remove the lock and handle and clean it from accumulated dirt and dust.
- The doors should be coated with protective agents, for example, polishes, varnishes, and so on.
- If the fittings are outdated or broken, it is important to replace the glass, handle and other parts.
- If the doors are made according to a certain mechanism design, then it is important to clean the folding parts twice a year.
To avoid various problems with the operation of items, it is advised to adhere to the rules. For example, the temperature in the rooms should be standard; it is also important to control the humidity level, which should not be more than 60 percent. Clean the surface from dirt and grease in a timely manner. It is also not recommended to use heaters and other devices. During repairs, the products are taken to another room or covered with film.
Wooden doors are susceptible to various types of damage, however, it is important to monitor the integrity of the structure. The surface of the door can be restored with wax pencils or varnishes.
