Sanox "Clean drain" for cleaning sewer pipes: composition, application, reviews

Clogged sewer pipes are a very unpleasant situation that can not only ruin your mood, but also disrupt your personal plans for the day. It is quite difficult to call a plumber to remove the blockage in the shortest possible time. At the same time, there are household chemicals that will help not only cope with the blockage, but also prevent its occurrence.

ATTENTION! A unique, highly effective product has been developed for cleaning sewer pipes, eliminating any blockages. The product is a concentrated mixture of enzymes that easily break down and process fat accumulations and any deposits of organic origin. One package of Saniclean will last you a whole year! Read more"

Most often, blockages occur in siphons, bends and pipe connections. It is here that there is a high probability of accumulation of mechanical particles that enter the sewer along with used water. Blockages are also caused by deposits of natural sediment from tap water, hair, vegetable and animal fats, paper, and food debris entering the sewer system. In addition to obstruction of water pipes, negative sensations are also caused by an unpleasant odor from the pipes, as a result of rotting sediments.

Of course, it is necessary to minimize the risk of blockage by installing special filter meshes on the drain holes, but this does not always solve the problem, for example, of hard water or dissolved fats. And the drainage capacity is significantly reduced, which is not very pleasant.

There are several ways to deal with blockages by mechanical cleaning, but they do not solve the problem of completely removing deposits from the inner surface of pipes. For more effective cleaning, including the removal of deposits, it is advisable to use special products that dissolve foreign objects in the pipeline. Such products include Sanox for cleaning pipes.

What does it consist of?

Sanox "Clean Drain" is a universal remedy and is used to eliminate blockages, regardless of their origin. In other words, it can be used both for cleaning the sink in the kitchen and in the bathroom or toilet. The main active ingredients are:

an aqueous solution of sodium hypochlorite, which in the process of contact with organic deposits oxidizes them and dissolves them;
anionic surfactants (surfactants) remove fatty deposits;
nonionic surfactants decompose organic substances into elements that are safe for humans.

The product also contains disinfectants that help destroy bacteria and, accordingly, fight the smell of rotting. The fragrance makes the smell of the product not very strong.

How effective is Sanox dishwashing gel?

Many housewives, trying to reduce the family budget, purchase universal products for cleaning everything at once. Some of them went even further, experimentally proving that even plumbing cleaner can be used to wash dishes.

The high concentration of the product suggests the idea of diluting it with water, in which the dishes are washed. It does an excellent job of cleaning the outside of stainless steel, aluminum and cast iron pans, as well as removing grease. However, do not forget about the acidity of the product, therefore, if you decide to use it for a purpose other than its intended purpose, all kitchen utensils should be thoroughly rinsed after washing.

Sanox does an excellent job of cleaning the outside of stainless steel, aluminum and cast iron pans, as well as removing grease.

In the Soviet Union, the SES required that dishes in kindergartens be soaked in solutions containing chlorine (for disinfection).

Advantages of the product

The main advantages of Sanox “Clean Drain” pipe cleaner are:

no negative impact on pipes, regardless of the material from which they are made;
the ability to use the product to remove any type of blockage - in the kitchen, bathroom and toilet;
sufficient activity of the components of the product allows you to cope with complex blockages;
bactericidal properties of the composition, removing unpleasant odors from pipes; — admissibility of using the product as a prophylactic.

The undeniable advantage of Sanox “Clean Drain” pipe cleaner is its affordable price compared to analogues.

If there is little water flow in the bathroom, the sink is clogged, or there is an unpleasant smell in the kitchen that cannot be removed with a freshener, you need to act immediately. With the help of Saniclean you can easily cope with the situation without a plumber... Read more»

Technical characteristics of the cleaning product "Sanox gel"

Gel-like Sanox is the most universal remedy. Enhanced surface cleaning is ensured by the new Poli-Gel component. Even after freezing and thawing, the gel retains its properties. At the same time, the manufacturer recommends storing Sanox Gel at a temperature of +5 degrees - this is the minimum - and a maximum at a temperature of +30 degrees. At a relative humidity of 95 percent.

Almost all cleaning products are divided into several groups depending on the chemical reaction, the indicator of which is pH:

Acidic products have a rating from 1 to 6;
Alkaline – 10–13;
Neutral and slightly alkaline – 7–9.

If the composition contains acids, then the drug has an acidic reaction. In the case of a pronounced chlorine odor, the product has an alkaline reaction.

Substances with a neutral or slightly alkaline reaction are used to treat “delicate” surfaces. For example, when cleaning acrylic bathtubs, wood, leather and so on;

Substances with a neutral or slightly alkaline reaction are used to treat “delicate” surfaces.
With an alkaline reaction, preparations are ideal for removing carbon deposits, stainless steel surfaces, as well as cleaning sewer pipes;

With an alkaline reaction, preparations are ideal for removing carbon deposits and stainless steel surfaces.
The acid does an excellent job of removing traces of rust, limestone deposits, and mortar residues, including cement. When washing tiles, be careful around the seams. Otherwise, the acid will remove all the grout.

When washing tiles, be careful around the seams.

Alkali is not used for cleaning windows (the glass will become cloudy) or for acrylic bathtubs. Therefore, it is important to pay attention to the technical characteristics of the Sanox Gel cleaning product and more.

How to use the product

The product in gel form can be used in case of severe blockage and a large amount of water above it. To effectively deal with the blockage, you need to pour the gel into the drain hole, and the thick consistency will allow you to do this even through a layer of water. The gel, due to its greater mass and thick composition, will penetrate the drain hole and reach the site of the blockage, where the active substances will react with the substances that formed it. After this, it is necessary to give time for the chemical reaction to completely remove the blockage. This takes 15-20 minutes. At the end of the procedure, it is necessary to flush the pipeline with plenty of running water.

Table - overview of popular analogues

Scope of application	Name	Active ingredients	Specifics	Approximate cost at the beginning of 2022 (in rubles)
Plumbing cleaning	Sanfor Universal	surfactant, chlorine, sodium hypochlorite,	acts in 5 minutes, for severe contamination - within an hour, exhibits disinfectant and cleansing properties, judging by the reviews, it smells like bleach,	100–110
	Sarma	oxalic acid, benzalkonium chloride,	provides a pronounced antibacterial effect, is distributed evenly on the contaminated surface, so can be used without a brush or sponge,	130–150
	Sanita	a mixture of acids, including oxalic, Non-ionic surfactants <.5%,	not suitable for cleaning sensitive surfaces, removes all types of contaminants, including rust,	60–70
	Domestos	nonionic surfactants <.5%, anionic surfactants <.5%, sodium hypochlorite, soap,	exhibits disinfectant properties, fights dirt and unpleasant odors,	100–110
To clear blockages	"Mole"	sodium and potassium hydroxide (up to 60%), Surfactant (up to 10%), modified acetic acid (up to 10%),	produced by several manufacturers, it takes 1.5 hours or more to remove the blockage, consumption per “procedure” - 200–250 ml of product (the volume of the bottle depends on the specific product),	30–120 (depending on manufacturer)
	Sanfor "For pipes"	sodium hypochlorite, APAS and nonionic surfactants <.5%, sodium hydroxide,	To remove a blockage, you need 250 ml of product (bottle volume - 750 ml), thick texture that ensures deep penetration of the product into the pipe even in the presence of water, acts within 5–15 minutes, safe for any pipes,	120–150
	Deboucher Active	sodium and potassium hydroxide, chlorine, active additives to accelerate chemical reactions.	To remove a blockage, 0.5 liters of product is required (bottle volume - 1 liter), not suitable for aluminum pipes as it contains chlorine, It takes an hour to clear the blockage (for light contamination it works faster).	100–150

Compliance with safety measures

Sanox pipe cleaner is an aggressive chemical compound. In some people, product vapors may cause allergic reactions. Contact of gel or granules on the skin can be a source of chemical burns and cause quite serious pain.

In order to avoid the negative consequences of interaction of skin and mucous surfaces with a pipe cleaner, the following safety precautions must be observed:

it is necessary to open the original packaging with care, holding it vertically, while the bag of granules must be cut strictly according to the indicated markings;
Carry out the cleaning procedure in a well-ventilated area or with exhaust ventilation;
It is better to pour the gel into the drain hole by holding the package at arm's length to avoid getting the product into your eyes;
packaging with Sanox must be stored in a place out of reach of children, separate from food products;
when working with Sanox, use protective equipment - rubber gloves, and, if possible, a respirator;
during the active action of the product in the pipes, do not bend over or look into the drain, do not inhale the vapors, this can lead to burns of the mucous membrane;
if the gel spills, it is necessary to remove the product with a damp cloth, which is then thrown away;
if the product gets on the skin, it is necessary to rinse the area with plenty of running water, and if this happens to the mucous membranes of the eyes or nose, immediately consult a doctor after rinsing;
Do not allow pets into the room where pipes are being cleaned;
Rinsing with running water must be done with caution, starting with a small stream of water, gradually increasing the pressure.

If allergic reactions occur, you must stop using the product and consult a doctor immediately.

Instructions for Sanox detergent

The instruction manual for the product indicated on the back of each bottle differs depending on its intended purpose.

To clean plumbing surfaces, as well as when treating earthenware and tile products from rust, limescale, stone deposits and grease, it is recommended:

Distribute the product evenly over the contaminated areas and leave for 10 minutes;
Rub particularly dirty areas additionally with a suitable device;
Rinse with water.

Particularly dirty areas must be additionally rubbed with a suitable device.
When clearing blockages using a special product, manufacturers advise:

Pour about half the bottle of product into the drain and leave for half an hour to an hour;
To rinse off, run hot water for an hour.

To clear the clog, you need to pour about half a bottle of the product into the drain and leave it for half an hour to an hour.
Next, on the back of the bottle of 1, 1.1 l or 750 ml, the composition is indicated with special instructions. Once the product has expired, it should be disposed of as household waste as it becomes hazardous to people and the environment.

The following are precautions and cautionary advice regarding the use of Sanox on enamel surfaces. First you should try it on a small area. Information is then provided on conducting toxicological examinations and assessing the effectiveness of disinfection.

Tips for use

If there is a strong blockage and the sink or bathtub is filled with water, it is advisable to remove it. If this is not possible, then it is advisable to use Sanox “Clean Drain” pipe cleaner in the form of a gel.

It is not advisable to change the dosage indicated on the packaging or increase the duration of action of the product. If the passage of water is restored, but the drainage does not work well enough, then it is better to repeat the operation again.

In case of severe blockage and standing water, when the product does not cope with its function, you can use a plunger to clean it. At the same time, this method requires special care, since the product will inevitably rise into the bathtub or sink, and standing water will become aggressive to the skin. Therefore, when using a plunger as an additional means of cleaning, it is necessary to protect the skin of your hands with rubber gloves and avoid splashing water.