Features of the procedure for washing windows outside and inside

— How long does it take to wash a standard window on both sides?

- Depends on skills and equipment.

A non-professional with a sponge and a newspaper will spend at least 15-20 minutes on “everything about everything.” A non-professional with “advanced” window cleaning devices will cope with the task in 7-10 minutes. An experienced washer will need no more than 120 seconds.

In this article we will talk about a professional approach to glass cleaning. Let’s take the master’s work kit one by one and tell you how to choose the right tools. And for dessert, we’ll explain how to quickly wash windows without streaks using different methods.

Click on the title to go directly to the section you are interested in:

Choosing professional window cleaning equipment:

,

,

Questions and answers for Gigtest: Part 1

How often are amazing spaces cleaned? after the end of the course, if in two shifts, then twice after the end of each shift.

Responsibility for the timeliness of the organization, completeness and reliability of the production control carried out is assigned to: legal entities, personal businessmen.

Is it permissible to recruit school students to wash windows or change vacuum tubes? illegal

Sources of food infection with staphylococci can be: people with pustular skin lesions, people who prepare food and people who are sick with sore throat, laryngitis, bronchitis, who take part in the culinary processing of goods.

The main way to protect against measles, rubella, and mumps is vaccination.

In the event of emergencies, production stoppages, technological process violations that create a danger to the sanitary and epidemiological well-being of the population, legal entities must inform in a timely manner: all of the above is correct.

What infectious diseases are vaccinated to prevent? tuberculosis, diphtheria, rubella, viral hepatitis B.

Disinsection is a set of measures aimed at eliminating insects.

Types of administrative liability provided for violation of sanitary legislation. issuing a warning, imposing a fine.

Containers for waste collection in the economic zone should be located from the exit of the catering unit and the windows of classrooms and offices at a distance of 20 meters.

Test tasks for passing the Sanitary Minimum for a teacher with answers

Select the correct answer The angle of visibility of the board from the edge of a board 3.0 m long to the middle of the student's outermost place 2-3 steps behind the front table must be at least: A) 40 degrees B) 35 degrees C) 30 degrees 6. Select the correct answer Maximum value the impact on the student of the educational process in grades 5-7 per week is, for 6-day training: A) 32-35 hours.

B) 22 - 25 hours. B) 28 - 31 h. 7. Select the correct answer The maximum amount of impact on a schoolchild from the educational process in grades 8-11 per week is, with 6-day training: A) 28-31 hours.

B) 31 - 34 hours. B) 36 - 37 hh. 8. The distance from the eyes to a notebook or book for students in grades 5-11 should be at least: A) 30 - 45 cm B) 20-25 cm C) 50-55 cm 9

Attention Take the test The test is based on the second part of §7-8 Foreign policy of Russia in the second half of the 16th century. Textbook "History of Russia 7th grade" edited by

Gigtest Questions and Answers: Part 2

The increase in the body’s protective parameters is facilitated by: all of the above is correct.

Where is it recommended to provide a room for storing and processing cleaning instruments and preparing disinfection mixtures? on any floor.

How do worm eggs get into the environment? with the feces of a sick person or carrier.

Entrances to bathrooms are not allowed to be located opposite the entrance to classrooms.

At what age can citizens who commit violations of sanitary legislation be brought to administrative responsibility? from 16

Smoking promotes development: All of the above are true.

Types of liability for sanitary violations: disciplinary, administrative and criminal.

Article of the Federal Law No. 52 “On the sanitary and epidemiological welfare of the population”, related to the well-being of children and adolescents, concerns: all of the above is correct.

During non-school hours, in the absence of children, the temperature in the premises of a general education institution must be maintained at least: 15 C

On the territory of a general education institution, the following zones are distinguished: all of the above is correct.

If there is a lack of fat in the diet of children, the following changes occur in the body: all of the above is correct.

When there is a lack of fluoride in the body, caries develops .

Rules for using medical gloves

1) in some cases, it is allowed to use the same pair of gloves when in contact with two or more patients; 2) changing medical gloves when working with patients is not regulated; 3) it is not allowed to use the same pair of gloves when moving from an area of ​​the patient’s body contaminated with microorganisms to a clean area; +4) it is not allowed to use the same pair of gloves when contacting ( for care) with two or more patients;+ 5) it is allowed to use the same pair of gloves when working with one patient, regardless of the number of manipulations and areas of the body; 6) it is permissible to use the same pair of gloves when providing general care to several patients.

Gigtest Questions and Answers: Part 3

Windows are washed outside and inside: 2 times a year.

The production control program must be drawn up by: a legal entity, a personal businessman.

After serving the order to pay a fine to a person who has violated sanitary norms and rules, the period for voluntary payment of the fine is: 60 days.

Who makes the decision to impose a fine for violations of sanitary legislation? Head of the Rospotrebnadzor Department.

Routes of infection with HIV (human immunodeficiency virus, which causes HIV infection, a disease whose final stage is known as acquired immunodeficiency syndrome AIDS)

-infection:
sexual, parenteral, vertical.
Who draws up the production control program (plan)? legal entity, personal businessman.

How often should exhaust ventilation grilles be cleaned of dust? every month.

Prevention of viral hepatitis B: get vaccinated, avoid casual sex and drug use, using a condom.

HIV (human immunodeficiency virus, which causes HIV infection, a disease whose final stage is known as acquired immunodeficiency syndrome AIDS)

infection is a serious illness, first characterized by deep damage:
the immune system
The area of ​​transoms and windows in classrooms must be: at least 1/30 of the floor area

When the air temperature reaches what temperature should ventilation in the gym be stopped? 14 p.

Recreation facilities in general education institutions must be provided at a rate of at least 0.6 m2 per student

Is it allowed to use pink and green colors for painting walls in educational institutions? authorized

Is it possible to place a wardrobe in recreational facilities, provided that they are equipped with personal lockers?

XVIII. Requirements for the sanitary maintenance of premises of preschool organizations

18.1.
All rooms are cleaned using a wet method using detergents at least 2 times a day with open transoms or windows, with mandatory cleaning of places where dust accumulates (floors near baseboards and under furniture, window sills, radiators, etc.) and frequently dirty surfaces (door handles) , cabinets, switches, hard furniture, etc.). Wet cleaning in bedrooms is carried out after night and daytime sleep, in group rooms - after each meal.

18.2. Tables in group rooms are washed with hot water and soap before and after each meal with a special rag, which is washed, dried and stored dry in a special labeled container with a lid. Chairs, changing tables, playpens and other equipment, as well as oilcloth linings and oilcloth bibs, are washed with hot water and soap after use; fabric bibs are washable.

18.3. For technical purposes (cleaning group rooms, toilets, etc.), a separate water tap is installed in group toilet rooms.

18.4. Carpets are vacuumed daily and cleaned with a damp brush or beaten out in specially designated areas, then cleaned with a damp brush. Once a year they are dry cleaned.

18.5. In rooms where corners of wildlife are equipped, daily wet cleaning, cleaning of cages, feeders, replacement of bedding, washing of drinking bowls and changing the water in them are carried out. Once every two weeks, cages, feeders, and drinking bowls must be disinfected, followed by rinsing with running water and drying. After disinfection, clean bedding and food are placed in the cage.

18.6. Sanitary equipment is disinfected daily, regardless of the epidemiological situation. Toilet seats, flush tank handles and door handles are washed with warm water and soap or another detergent that is harmless to children’s health every day. The pots are washed after each use using ruffs or brushes and detergents. Bathtubs, sinks, and toilets are cleaned twice a day with ruffs or brushes using detergents and disinfectants.

18.7. General cleaning of all premises and equipment is carried out once a month using detergents and disinfectants. Windows outside and inside are washed as they become dirty, but at least 2 times a year (spring and autumn).

18.8. In case of an unfavorable epidemiological situation in the subsidiaries, in order to prevent the spread of infection, additional measures are taken in accordance with the requirements of sanitary rules.

18.9. Cleaning equipment for the toilet is marked with a bright color and stored in the toilet room in a special cabinet. After use, all cleaning equipment is washed with hot water and detergents and dried.

Disinfectant solutions and detergents are stored in places out of reach of children.

Containers with solutions of disinfectants and detergents must have lids and clear labels indicating the name of the product, its concentration, purpose, and date of preparation. For ready-to-use products approved for repeated use, indicate the date of its dilution. All disinfectants and detergents must have instructions for their use and be used in accordance with them.

18.10. In the warm season, windows and doors should be screened to prevent insects from entering. To control flies indoors, you can use mechanical methods (sticky tapes, fly traps), as well as chemical fly control agents registered in the prescribed manner [3].

18.11. The louvers of exhaust ventilation systems must be open; They should be covered only when there is a sharp difference in indoor and outdoor air temperatures. As they become dirty, they are cleaned of dust.

Exhaust ventilation shafts are cleaned as soon as they become dirty.

12.18. All types of repair work are not allowed to be carried out during the operation of preschool organizations in the presence of children.

18.13. Before entering the group toys, purchased toys (with the exception of soft stuffed ones) are washed with running water (temperature 37 C) with soap or other detergent that is harmless to the health of children, and then dried in air.

Foam latex tufted toys and soft stuffed toys are processed according to the manufacturer's instructions.

Toys that are not subject to wet processing (washing, laundering) are used only as teaching material.

18.14. Toys are washed or washed daily at the end of the day, and in nursery groups - 2 times a day. Doll clothes are washed when dirty using baby soap and ironed.

18.15. In preschool organizations, rental and exchange of games, toys and other equipment is not allowed.

18.16. Reusable medical instruments are subject to disinfection in accordance with current regulatory documents.

It is preferable to use sterile disposable instruments with subsequent disinfection and disposal.

18.17. Bed linen and towels are changed when soiled, but at least once a week. All linen is labeled.

Bed linen, except pillowcases, is marked at the foot edge. Each child must have three sets of linen, including face and foot towels, and two changes of mattress covers. Clean linen is delivered in bags and stored in closets.

18.18. After use, laundry is placed in a special tank, a bucket with a lid, an oilcloth, plastic or double cloth bag. Dirty laundry is delivered to the laundry room (or special room). Cloth bags are washed, oilcloth and plastic bags are treated with a hot soap-soda solution.

18.19. Bedding: mattresses, pillows, sleeping bags should be ventilated directly in the bedrooms with the windows open during each general cleaning, and periodically taken out into the air. Once a year, bedding is dry cleaned or treated in a disinfection chamber.

18.20. After use, washcloths for washing children (the number of washcloths corresponds to the number of children in the group) are soaked in a disinfectant solution, washed with running water, dried and stored in clean cloth bags.

18.21. If there are insects and rodents in the premises of subsidiaries, specialized organizations for disinfestation and deratization will organize activities in accordance with sanitary rules that impose sanitary and epidemiological requirements for carrying out disinfection and deratization measures.

Didn't find what you were looking for? Use the search:

Best sayings:
What kind of mathematicians are you if you can’t password protect properly.
8422 –
| 7325 – or read all.

Main rules

Washing windows without streaks requires some approach. And more specifically:

• painstaking preparation of tools;
• carrying out work in non-sunny weather;
• placement of tools and detergents on the inner window sill;
• perform all movements carefully;
• step-by-step cleaning from frame to glass;
• removing heavy contaminants by soaking and introducing a scraper;
• glass polishing at the end.

In particular, it is important to observe safety precautions. This will eliminate injuries and the most severe tasks.

Preliminary step

To wash plastic windows, you will need certain supplies. And more specifically:

1. Sponge. Products with one side soft and the other hard are allowed to be used. The second will allow you to quickly remove dirt.
2. Windshield wiper device. In another way it is called a screed or a squeeze. It makes cleaning windows easier and faster. The system is equipped with a long telescopic handle. With its help, you don't have to stand on a stool to reach the very top. There are the most modern models, where the sponge and fold are on different sides.
3. Detergent.
4. Tissue (medical system of cells and intercellular substance, united by a common origin, structure and functions)
   . For such work, you can use rags. The main thing is the absence of lint after wiping. It is acceptable to use linen, microfiber, cotton, and spandex.
5. Water container. It is better that it has the highest edges. This will prevent spillage when washing windows without streaks.

It is worth seeing that the market for special products and preparations that can be used to bring window structures into the appropriate form is very large. Among the more necessary products are:

• Sanita;
• Mister Muscle;
• Cif;
• Clin:
• Help and analogues.

Such compositions were painstakingly developed under industrial conditions and will give good results. But they contain chemicals. Therefore, when working, it is necessary to carefully follow the recommendations from the manufacturer.

They specifically wash glass. Main advantage:

• uniform distribution over the surface;
• instant effect;
• absence of streaks, smudges, even when wiped with a napkin (A collection of different and interacting tissues form organs)
  .

Interesting read: Window retainer for plastic windows
Almost everyone has their own special recipes for caring for glass surfaces:

Chalk. He appropriates radiance and radiance. To make the surfaces attractive, it is enough to use crushed construction powder. Before use, it must be diluted with water in a ratio of 1:3. The mixture is thoroughly mixed and applied using napkins. As the mass begins to dry, it is removed with a dry cloth (A collection of different and interacting tissues form organs)

without lint. This will remove the chalk deposits.

Vinegar. A mono product that is combined with other components. The substance has a good ability to perfectly remove dirt. There are a couple of options for its implementation. Dilute a couple of spoons in water for final rinsing. Supplement them with ingredients in the form of honey and chalk.

To deal with particularly stubborn dirt, you can work with unstained table vinegar, without preparatory dilution in water. This way you can rinse the plastic windows clean. It is important to remember that the vapors of this product are especially unsafe. Inhaling them can lead to burns of the mucous membranes and respiratory tract.

Contact of vinegar with skin, eyes, and oral mucosa is strictly prohibited. If a similar situation is inevitable, an immediate appeal to a doctor is required.

Tips for cleaning windows depending on the frame material

Streak-free window cleaning is available on all frames. But each type has its own development, certain compositions.

Plastic

There are aspects to washing. You need to prepare:

• sponge;
• a solution with a cleaning agent without abrasive particles;
• screed;
• dry rag.

The process itself looks like this:

1. The sponge is moistened in a previously diluted solution with a cleaning agent.
2. They wipe the surface of the glass with it, occasionally wetting it in the composition.
3. Movements must be horizontal.
4. Using a screed, the dirt is driven to the bottom. The glass is re-wetted.
5. Cleaning begins. The angle between the screed and the glass is 30°.
6. After any movement with the screed, wipe the area dry and make the remaining moves.
7. When finished, wipe the window with a dry cloth. It must be made of microfiber. This will prevent the formation of villi, parch, and fibers.
8. Cleaning the windows one hundred percent means wiping the window sill, profile, and fittings.

Cleaning plastic does not require much effort.

Wood frames

They are much easier to deal with. And more specifically:

1. A liquid intended specifically for such structures is applied to the windows. They can be presented in the form of sprays.
2. Pass over the surface with a clean rag.
3. It is prohibited to work with newspapers or materials that have lint.

It is worth considering additional individuality:

1. It is permissible to use a screed. The implementation rules are similar to working with plastic.
2. It is forbidden to wash glass with solutions containing soda and soap, or washing powder.
3. The best component for cleaning such material is a spoonful of ammonia added to a liter of water. In this case, quickly washing the windows is not a problem.
4. Places where complex contaminants are located are treated with a soft sponge.
5. Cleaning of the wood frame is completed by dry wiping. Otherwise, moisture will be absorbed into the paint. This will lead to cracking and swelling.

Following the advice presented will allow you to get a good result.

“Grandma’s” method against mild stains

Usually windows are washed one at a time. Finished with one, moved on to another. The inside of the windows is easier to clean. It’s easy to reach, and it gets less dirty, so the question “ How to wash windows quickly and well?” in this case it does not occur. Windows in the apartment are washed according to the following algorithm:

1. You need to take a basin and pour the required amount of water. Do not fill the container to the brim so as not to splash water during the washing process.
2. The window should be washed with a soft cloth so as not to leave scratches on the glass and plastic. You need to be especially careful to wipe away traces of flies and frozen dirt.
3. You should rinse the windows with another clean cloth.
4. An old proven method will help prevent streaks - wiping the surface with newspaper. You need to crumple it first.

Modern window cleaning products include special wipes and cleaning solutions. How to clean windows easily and cleanly? To make the process easier, you can use a window mop, which is equipped not only with a washcloth, but also with a special scraper that removes foam.

Why do divorces happen, and how to get rid of them?

To clean windows and remove stains on glass, you need to find the root cause of their occurrence. The main effect occurs when work is performed poorly, during which:

• Dirt marks remain on the glass;
• the detergent composition was not washed off one hundred percent;
• We washed the structures in sunny weather, when it is impossible to see stains.

To polish glass, first make vertical and then horizontal movements. It is necessary to wipe them well with cotton and woolen cloth (The structure of tissues of living organisms is studied by the science of histology)

.

Common mistakes

Almost everyone is wondering how to clean windows to prevent sweating. Some housewives, in an effort to create the most effective glass care solution, make mistakes. They can bring severe consequences. Absolutely forbidden:

1. Mix ammonia solution with compounds that contain chlorine.
2. Use soda and products with abrasive particles. It will leave scratches even on strong plastic and glass.
3. Use ammonia. This will lead to poisoning by vapors and toxic substances.
4. Work with dishwashing detergents. You will get a huge amount of foaming, and it will be very difficult to control it later.
5. Start washing all the glass immediately. All actions must be gradual, otherwise it will not be possible to achieve high-quality results in all options.

It is impossible to wash a plastic window on which the window sill is filled with objects, even if they are small in size. First, the curtains are removed, and later they free up space within a radius of 1.5 meters. If there are doubts that the chosen folk recipe for cleaning glass cannot provide a good effect, then you should give preference to special products made in industrial conditions.

Frequency of washing in the house and office

How many times a year you need to clean windows directly depends on the weather conditions of the town and region. Be sure to wash them in the spring, as soon as the snow melts. During the winter, a lot of dirt and soot accumulate on their surface.

Similarly, structures need to be prepared for the onset of winter. This is:

• inspection, replacement of fittings;
• preparing profiles;
• general cleaning before frost.

Then, to remove the dirt, wiping with a rag will be enough. In addition to this window in buildings:

• those remote from highways, factories and similar objects are cleaned less often;
• Among a large city, where there is a lot of dust and dirt, it is better to wash it at least 2-3 times.

As a rule, plastic windows need to be washed every month. It is important to remember that they can get dirty not only outside the room, but also inside. There is also dust in the rooms. There may be serious cosmetic repairs, constant food production and more.

When it comes to the question of what you can use to clean windows, there are hundreds of answers. The main thing is to use them well, not to violate technology, advice from experienced housewives. They also follow the rules on industrial detergents.

Interesting read: Fastening plastic windows in the opening

Household chemicals

Manufacturers of plastic windows recommend using products specifically designed for them. The most popular:

1. Clin “Windows and Mirrors” spray – an alcohol-based product that will clean and form a water-repellent film on the glass surface. Convenient to use, economical, does not require polishing, does not leave streaks. Price - from 120 rubles.
2. Muscle liquid product with ammonia is conveniently applied to the glass surface thanks to a dispersion sprayer. Does not leave streaks and copes with stubborn stains (oil, soot). Price - from 120 rubles.
3. Cif is an alcohol-based liquid that effectively fights greasy stains and stubborn stains and cleans glass effortlessly. Easy to use and economical thanks to the spray nozzle. Price - from 100 rubles.

Comparing industrial products and solutions prepared at home, housewives agreed: they give the same result, but the first category allows you to tidy up the window faster, and the second has practically no impact on the family budget.

What is required for washing glass on the balcony

To thoroughly clean the windows inside and out you will need:

• Soft lips without an abrasive base, so as not to scratch the glass;
• Detergents (at the moment there are enough products that are used only for washing glass);
• A mop to reach inaccessible places;
• Paper napkins - to wipe the surface dry;
• Rubber scrapers for cleaning heavy dirt.

How to clean windows from the inside. Step-by-step instruction}

You should start washing windows specifically from the frame contour. If you wash the glass first and then move on to the frame, streaks will remain around the perimeter. It is also necessary to open all windows that you plan to wash.

There is no exact instruction on how to proceed correctly, but there are some useful tips that simplify the process:

1. Washing starts from the top of the windows.
2. First, wash the corners and areas adjacent to the frame, then move to the central part.
3. If an aerosol is used as a detergent, you need to spray it on the glass, then wait 1-2 minutes until it settles normally on the surface.
4. Any product on the surface of the glass is rubbed with radial movements.
5. Stains can be removed with cardboard napkins.

Advice: do not use newspapers, as in Russian times. When dented, it forms sharp corners that can cause scratches on the glass.

Basic moments

How to wash windows: with what frequency, with what means, and are there any special features of the procedure? It is necessary to thoroughly wash the glass at least once every 2 months, and wipe it every week. The Russian climate does not allow washing the windows from the outside so often, so you have to wait for warm weather and clean only the inside of the windows. Windows on the ground floor are more susceptible to contamination, but they are much easier to clean.

You should start taking care of plastic windows from the moment they are installed. Before you wash your windows, you need to install them.

First of all, you should make sure that the technician does not remove the protective film during installation. It must be peeled off after the structure is completely installed.

The elastic seal must be lubricated with silicone oil every year. This will extend its service life. The window cleaning process has many features that will help you quickly and effectively get rid of dirt on the glass without streaks. And the first question is - what is the best way to clean windows?

How to clean windows from the outside. Step-by-step instruction}

External window cleaning is much more difficult. For those who live on the ground floor, coping with the task is much easier. There are some rules to follow here:

• For high-quality cleaning, the rubber scraper must be guided from the far side to the near side.
• First, the frames are washed using a mop. It would be better if the handle on the mop was adjustable.
• In order to remove stains after washing, use paper napkins or towels, which are used to wrap a mop or scraper.

Attention: it will not work to use an aerosol to clean windows from the outside, so they use soap compounds or traditional means.

For additional protection, after washing the windows, you can treat the glass surfaces with ammonia. It will repel dirt for a while and allow the effect to last longer.

How to clean tall windows

To clean large windows you will need:

1. Start from the highest part
2. Wash the frames first, then move on to the glass
3. Use a stable stepladder, mop and scraper with adjustable length
4. Spray the aerosol onto the washing surface, and not onto the glass, if you do not have a special soap solution on hand.

Tall windows must be washed inside and out with strict adherence to safety precautions. If it is very awkward to clean the tall windows from the outside, it is recommended not to sacrifice your life, but to contact special companies that provide proper services.

Robot vacuum cleaners

A device that can take on all the work of cleaning windows and carry out washing without human intervention is a robot vacuum cleaner. There are still few varieties of such devices on the modern technology market, but the existing models have already earned positive customer reviews. The brands WINBOT, Windoro, Hobot are especially popular.

With this device, washing windows at height turns from a dangerous routine job into a pleasant experience. Cleaning, like hand washing, consists of wet and dry cleaning, resulting in sparkling clean windows.

WINBOT. It is suctioned to the glass using double suction rings. When the device is turned on, the built-in pump creates an internal vacuum. The robot moves thanks to the alternating suction of the double rings. Using the front microfiber cloth soaked in a cleaning solution, most dirt is removed. After this, scrapers are put into operation to remove remaining dirt and moisture. To complete the process, the back dry microfiber rubs the glass surface to a shine. The robot is controlled from a remote control. You can wash the window inside and outside the room, no matter how high the floor it is located, without getting up from the sofa.

Windoro. This device attaches to the glass surface using a magnet and is battery powered. First, the robot determines the boundaries and dimensions of the space to be cleaned, moving along the perimeter, after which it begins cleaning, moving in zigzags.

Hobot. All models of this manufacturer are distinguished by high functionality and reliability, silent operation and convenient control from the remote control. The device can operate both from the mains and from a separate battery, so the range is not limited.

Each of the listed devices is designed to clean windows inside and outside. The cost of such devices ranges from 15 to 25 thousand rubles. Your own safety and comfort are worth it.

How to clean sliding windows

In general, the cleaning process for sliding windows must be guided by the same instructions as for all other types. And more specifically:

1. Start washing from the top
2. First, clean the frame, remove debris and dirt at the junction of the frame and glass
3. Do not use abrasive lips to avoid scratching the surface.

The difference is that it will not be possible to thoroughly wash sliding windows if individual frames are not dismantled first. Since they touch together, and it is often impossible to fully reach with your hand, high-quality cleaning will not be possible without performing this process. But dismantling is quite simple; if the frames are low, then you can cope with it without the help of others.

Task 2[edit]

Legal
You take up daily duty in the therapy department, taking over a shift from your predecessor.

At this time, breakfast is being distributed. There are many bedridden patients in the department, and the barmaid cannot cope. A nurse rushes to her aid. She had just finished cleaning the corridor and immediately, without changing clothes, she “intercepted” the barmaid’s gurney with food and took it to the wards. At this time, the barmaid returned to the dining room to feed the walking patients.

You quickly finished your shift and also hurried to distribute food. You are wearing a clean new white robe (no markings).

1. Participate in food distribution
2. Check the contents of refrigerators where patients' personal food is stored
3. Monitor compliance with dishwashing rules in pantries

1.2 (participate, check)

How to wash plastic windows

Nowadays, plastic windows are installed more often than others, since they are easy to install, maintain and can last a long time. To wash them, you need to follow several rules:

• Plastic frames are sensitive to abrasives, so only soft lips are used;
• It is better to use different lips for glass and frames.

Specialized stores sell special polishing agents that help maintain the effect longer. Instead, you can use vinegar or ammonia, but provided that the room is well ventilated.

Detergents

If we talk about means for the care of plastic windows, then there are more of them every year. Industry produces all the newest and most advanced products.

For cleaning you may need:

• “Mr. Muscle” - a product created for washing glass, will allow you to get a transparent window without streaks;
• “Formula 409” is suitable for cleaning stains;
• "Sanita" will help to delicately cleanse dirt;
• “Frosh” will free you from traces of installation work;
• “Snow White Cat” is a rag that is designed for washing glass and plastic surfaces;
• “Domestos” is a gel that helps restore the whiteness of the plastic frame;
• “Mr. Proper” - perfectly copes with fingerprints, grease, soot;
• Pemolux is recommended for cleaning old dirt and stains;
• Comet gel is used for cleaning kitchen windows - it perfectly cleanses greasy dirt;
• Washing powder, laundry soap or dish soap can be used to clean new stains and small areas.

Apart from the introduction of household chemicals, you can resort to folk remedies, which are no less effective. Let's look at what you can use to clean plastic windows at home:

• Soap solution. Take any powder or laundry soap and dissolve it in water. The purchased composition is used to clean windows.
• Dentifrice. It is combined with chalk to form a homogeneous mixture of sour cream, applied to the dirt and allowed to dry, then washed with a dry cloth.
• A solution of vinegar or citric acid in combination with soda gives a good effect. Soda is applied to the surface and vigorously rubbed with a sponge and acid.

Interesting read: How plastic windows are regulated

Wash according to instructions without special tools

Experienced housewives know that washing a window does not mean polishing the glass until it shines; all parts of the structure deserve attention. You should start with preparation: remove curtains, nets, clear the window sill. Then proceed to the main part.

Step-by-step instruction:

1. 
   Cleaning frames with soapy water. In case of severe contamination, it is necessary to use professional liquids.

2. Removing dirt and stains from double-glazed windows. You can use a sponge with a special product, moving from top to bottom (repeat twice).
3. Processing of glass and profile joints. The greatest amount of dirt accumulates there. Do not allow alcohol-based solution to come into contact with the seal.
4. Rubbing glass. To avoid the formation of streaks on the glass, you must use a dry cloth or microfiber cloth.
5. The final stage is the window sill. Even stubborn stains should not be removed with household chemicals with an aggressive composition.

How to keep the outside clean?

You can do without a magnetic brush and a mop with a telescopic handle if:

• You need to wash the windows in a private house; you can use a stepladder and do it from the street side;
• the doors open inward - in this case, the process must begin with them.

In other cases, without risking the life and health of the owner, it is possible to clean the glass from the outside only with the use of special assistants.

Washing technique

In order for plastic to remain aesthetically pleasing for a long time, you need to know how to wash plastic windows at home and follow certain rules for caring for them. The main point is the right choice of tools. It is not allowed to use abrasive products that can scratch the plastic surface or scratch the glass . It is worth using soft rags, lips, paper towels and napkins.

In addition, remember some rules:

• wash the windows on a cloudy day so that the glass does not dry so quickly and you have time to wipe the surface before rainbow stains appear on it;
• First they clean the frame, then only the glass unit;
• apply the detergent composition moderately and in one direction, radial movements create streaks;
• For glass, it is better to take special alcohol mixtures of detergents.

For good cleaning results, you should follow the correct sequence of actions. If the window was installed not long ago, it is necessary to peel off all the film that protected the frame during transportation.

Using ordinary soapy water, I wash the plastic from dust and dirt. If there are individual areas of severe contamination, they are treated with special means. Shallow scratches can be removed using polish. But not all products can be used to clean plastic windows.

Fundamentally! Remember what is not allowed to be consumed:

• abrasive powder products will leave scratches on the surface, creating an unkempt appearance of the plastic structure;
• acid and solvent can change the color of the panel, so they should be used with caution.

Task 4[edit]

You have taken up Sunday duty in the general surgery department.
While walking around the department, entering ward No. 1, you noticed the following.. One of the beds is located against the wall with the window almost flush, at a distance of no more than 10 cm

This is the bed of a patient who was operated on for a large lipoma; his postoperative wound was festering; a drainage was installed in the wound, through which pus flows into a plastic bag. There is a thermometer on the nightstand next to the bed - the patient has just taken his temperature.

One of the beds stands next to the wall with the window, almost right next to it, at a distance of no more than 10 cm. This is the bed of a patient who was operated on for a large lipoma; his postoperative wound was festering; a drainage was installed in the wound, through which pus flows into a plastic bag. There is a thermometer on the nightstand next to the bed - the patient has just taken his temperature.

During the round, the patient sits on a chair, and the nurse changes the bed linen on his bed. The extraordinary change of linen was caused by the fact that part of the contents of the drainage bag spilled onto the bed. The nurse has already removed the sheet and pillowcase, which are lying on the floor. She is wearing a robe and a cap. She works without a mask or gloves.

Double room. On the next bed lies a patient who is being prepared for a planned operation on the veins of his legs. Currently, he went to take a shower, as he was supposed to do on the eve of surgery.

1. There are no gross violations
2. Patients who have undergone surgery and those who are being prepared for surgery should not be in surgical wards at the same time. It is necessary to report this to the surgeon on duty or the responsible administrator
3. A patient who is preparing for a “clean operation” and a patient with a suppurating postoperative wound cannot be in the same room. A patient with a festering wound should be transferred to a purulent department or to a separate ward. It is necessary to urgently report this to the surgeon on duty or the responsible administrator

only 3 (cannot share one room)

1. There are no violations of the requirements for linen regime. Linen stained with pus is immediately replaced with clean one, which fully complies with SanPiNam 2.1.3.2630-10
2. Dirty laundry should be collected in closed oilcloth bags and not thrown on the floor
3. When collecting dirty linen, a nurse must use not only a gown and cap, but also gloves and a mask.

2,3 - dirty, nurse (without 1 - without the wrong answer)

Proper care of the plastic frame and double-glazed windows

Durability of use is justified by proper care. This is especially important in the winter, so you need to know how to care for plastic windows in the winter.

In order to prepare a window for winter, you will need tools and equipment. These include:

• rags and napkins;
• soft brush;
• hexagon;
• seal lubricant;
• machine oil.

Sequence of work

Before all this, you need to wash the windows from dirt and dust that has accumulated during the spring-summer period. For all this, use soft rags and napkins, as well as non-abrasive detergents. Heavy contamination cannot be removed using a knife and dusty cleaning substances . Before you start cleaning the windows, you should brush off the dust.

After this, you need to start adjusting the fittings. You can create this using a hexagon. To avoid cold penetration into the room in winter, it is necessary to switch the clamps on the sashes to winter mode. In this way, the fit of the window frame will be stronger.

It is important to lubricate the fittings with oil. After applying it to the parts, you need to open and close the sash a couple of times, this will help the oil to distribute. The indicated function should be repeated throughout the winter, the main thing is not to do this in severe frosts.

The seal also requires attention. Rubber products wear out over time and no longer fit tightly, which affects the density of the window. You can wash the rubber directly on the window or by removing it. The function must be carried out using detergent, and then be sure to wipe dry. The process ends with the application of silicone rubber sealants.

If you notice that a window fogs up or condensation collects in winter, then you need to contact a specialist . They will check the condition of the rubber seal and replace it if it is worn out. It is important to replace parts just right, this will help extend the service life of the window.

Double glazing service

If a plastic window is installed correctly, the glass unit will last approximately 40 years. When installing, make sure that the windows are covered with a special protective film, which will protect them from scratches during transportation and installation. Such windows do not need to be painted or taped for the winter, but they still need to be washed at least twice a year. You should not do this at low temperatures, because the glass may break if it comes into contact with water.

Glass can be washed with soapy water. It is not allowed to use abrasive powders and brushes that scratch the glass surface.

Window sill care

The window sill deserves special attention. This is especially true for those who like to decorate their apartment with indoor plants. Water from watering flowers, falling on the windowsill, forms yellowish circles over time. These stains are very difficult to remove, and even then it is simply unrealistic, so it is worth using a special self-adhesive film on the windowsill, which can be snow-white or another color, as well as trays for indoor plants.

The texture of the window sill may vary from manufacturer to manufacturer. They can be smooth, porous or rough. When selling, the expert usually talks about what specific material is used for the window sill and how to wash off the dirt. But you should take into account certain individualities, for example, a rough window sill can be cleaned using a hard brush, but under no circumstances should you use a scraper or knife.

Slope care

Slopes also need maintenance, but the means for this directly depend on the materials from which they are made. If they are made of plastic, they will not require special care. They simply wash and cleanse themselves of dust and dirt. Individuality is the need to replace the sealant, which a couple of years after installation is completely removed and replaced with a new one.

If the slope is made of plasterboard, then it is covered with paint, which can be washed and updated as necessary. When using cork or bamboo, wipe them quite systematically with a damp cloth to remove dust.

Plastered slopes should not be washed, as they are not resistant to moisture; they can be wiped with a damp or dry cloth . Acrylic sealant must be used at joints, and the surface must be painted in time.

By following simple tips for caring for plastic windows, you can use them for a long period of time.

Sequencing

You need to start properly washing plastic windows from above and from the inside, that is, from cleaner surfaces, and then gradually move on to the main contaminants that accumulate below and outside.

Wash away the dirt

At this stage, the main thing is not to be lazy about changing the water and rinsing the rag well so as not to spread dirt across the surface of the plastic and glass.

Start with wet or dry cleaning from the very top - wipe the cornices, collect dust and cobwebs from the ceiling and slopes with a vacuum cleaner. Mix a warm, mild soap solution in a bucket and wipe the inside of the frames and glass without opening the window. Rub the most contaminated areas on the handles and windowsill well with a rag or sponge.

Change the water in the bucket to clean water and add the next portion of detergent to it. Open the window sashes and wipe the top, sides, and then the bottom surfaces of each sash frame. Wash the frame itself and the glass outside, soak the dirt on the outer window sill.

To avoid stains from detergents, it is recommended to remove dirt from glass not with soapy water, but with solutions:

• table vinegar - 2 tbsp. l. for 1 liter of warm water;
• crushed chalk or tooth powder - 1-2 tbsp. l. for 1 liter of warm water;
• potato starch - 1 tbsp. l. for 1 liter of warm water;
• table salt – 1-2 tbsp. l. for 1 liter of warm water.

Heavily soiled glass can be washed well with a solution of vinegar, ammonia and starch. To prepare it, take 1 liter of warm water, add 1 tbsp. l. vinegar and ammonia, 1 tsp. potato starch. Pour the resulting mixture into a spray bottle, spray generously over the surface of the glass and collect all softened dirt with a damp cloth.

It is recommended to rub individual dirty spots or black dots from insects on the glass with half of a cut, unpeeled potato or onion.

Change the water again and, without soap, wash away any remaining dirt from the outer surface of the glass, frame and window sill. To be sure, wipe them again with a clean, well-wrung out cloth. At this point, the “dirty and wet” part of the work can be considered complete; all that remains is to clean the glass to perfect transparency and shine.

Let's shine

It is no secret that after washing glass, traces of dried water and soapy stains from detergents remain on their surface. Good housewives cope with such problems easily. How to wash plastic windows without streaks?

To rub the surface of the glass to a mirror shine, take a dry cloth or napkin. Some people prefer to polish things the old fashioned way (but no less efficiently) with crumpled newspaper or old nylon tights. Glass should be polished using intense circular movements from top to bottom.

Suitable weather conditions are considered an important factor for obtaining an ideal result. It is correct to wash plastic windows on a warm day in the absence of bright sun, rain and strong wind. In the hot sun, the remaining water and detergents dry out very quickly, leaving a lot of stains, and wind and rain make the process very difficult and constantly stain already washed surfaces.

Finishing touches

After making it clean and beautiful, take care of the safety and durability of your windows. The opening and closing mechanisms of the sashes are subject to the greatest mechanical loads, and the rubber seals are subject to temperature loads.

Window manufacturers recommend lubricating all metal fittings with machine oil after each wash after complete drying. Rubber gaskets around the perimeter of the frames must be treated with special silicone grease at least once a year.

After taking the necessary preventive measures, you can install mosquito nets and close the windows. Wipe the window sill again with a clean, damp cloth, removing any traces of cleaning and processing remaining on it. Return the “cheerful” flowers and home decor items to their place, hang curtains and clean curtains.

Now you can enjoy the smells of freshness and gentle sunlight with a clear conscience until it’s time to wash your plastic windows again.

Video from YouTube on the topic of the article:

An expert in the field of housekeeping and a master of culinary masterpieces (according to family and friends). I’m used to relying on common sense, everyday experience and women’s intuition.

Found a mistake? Select the text with the mouse and click:

The dishwasher cleans more than just plates and cups. You can load it with plastic toys, glass lamp shades and even dirty vegetables, such as potatoes, but only without using detergents.

The habit of using an automatic washing machine “sparingly” can lead to the appearance of an unpleasant odor in it. Washing at temperatures below 60℃ and short rinses allow fungi and bacteria from dirty clothes to remain on internal surfaces and actively multiply.

Before removing various stains from clothing, you need to find out how safe the selected solvent is for the fabric itself. It is applied in a small amount to an inconspicuous area of ​​the item from the inside out for 5-10 minutes. If the material retains its structure and color, you can move on to stains.

Stretch ceilings made of PVC film can withstand from 70 to 120 liters of water per 1 m2 of their area (depending on the size of the ceiling, the degree of its tension and the quality of the film). So you don’t have to worry about leaks from neighbors above.